Effect of mixing process on the luminescent properties of SrAl_2O_4:Eu~(2+),Dy~(3+) long afterglow phosphors

A new mixing method was developed for solid-state reaction synthesis of SrAl2O4:Eu2+,Dy3+ long afterglow phosphors.The morphology and crystal structure of the phosphors were analyzed with scanning electron microscope(SEM) and X-ray diffractometer(XRD).The excitation and emission spectra of the long afterglow phosphors were measured,and the main emission band was around 514 nm.The decay time of the product was measured and compared with the phosphors prepared using dry-mixing method and wet-mixing method.It ...     

Efficient near-infrared quantum cutting by Ce~（3＋）-Yb~（3＋） couple in GdBO_3 phosphors

Ce3+ and Yb3+ co-activated GdBO3 phosphors were prepared by a conventional solid-state reaction method. X-ray powder diffraction, photoluminescent spectra and decay curves were used to characterize their structural and luminescent properties. An efficient near-infrared (NIR) quantum cutting (QC) from the phosphors was observed, which involved the emission of two low-energy NIR photons (around 971 nm) from an absorbed ultra-violet (UV) photon at 358 nm via a cooperative energy transfer (CET) from Ce3+ to Yb3+ ions. The theoretical quantum efficiency was calculated and the maximum efficiency approached up to 164% before reaching the critical concentration quenching threshold. Our results demonstrated that these phosphors might find potential application in improving the efficiency of silicon based solar cells.     

Mechanism of upconversion emission enhancement in Y_3Al_5O_（12）：Er~（3＋）/Li~＋ powders

Er3+ and Li+ codoped Y3Al5O12(YAG) powders were prepared for a systematic investigation of their upconversion emissions.X-ray diffraction(XRD),upconversion emission spectra,pump power dependence,FT-IR spectra and decay time were studied to characterize the samples.With Li+ doping,the upconversion emission intensity of Er3+ doped YAG powders was obviously enhanced,accompanied with an increase in the ratio of green to red intensity.The enhancement of emission intensity could be attributed to two mechanisms:on...     

Er~(3+)-Yb~(3+)-Na~+:ZnWO_4 phosphors for enhanced visible upconversion and temperature sensing applications

The crystal structure and surface morphology of the Er³⁺/Yb³⁺/Na+:ZnWO₄ phosphors synthesized by solid state reaction method were analyzed by X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM) analysis.The frequency upconversion(UC) emission study in the developed phosphors was investigated by using 980 nm laser diode excitation.The effect of codoping in the Er³⁺:ZnWO₄ phosphors on the UC emission intensity was studied.The UC emission bands that are exhibited in the blue(490 nm),green(530,552 nm),red(668 nm) and NIR(800 nm) region correspond to the ⁴F_7/2→⁴I_15/2.²H_11/2,⁴S_3/2→⁴I_15/2,⁴F_9/2→⁴I_15/2 and ⁴I9/2→⁴I_15/2 transitions,respectively.The temperature sensing performance of the Er³⁺-Yb³⁺-Na+:ZnWO₄ phosphors was investigated based on the 2 H_11/2→⁴I_15/2 and ⁴S_3/2→⁴I_15/2 thermally coupled transitions of the Er³⁺ions.The photometric study was also carried out for the developed phosphors.     

SrAl2O4 :Eu2+, Dy3+ Long Afterglow Phosphors Prepared by Chemical Coprecipitation Method

SrAl2 O4: Eu2 , Dy3 long afterglow phosphors were prepared by chemical coprecipitation method. Ammonium carbonate and ammonium hydrogen carbonate were used as the precipitants. The preparation of the SrAl2 O4: Eu2 ,Dy3 precursor was completed at room temperature by controlling the concentration of the metal-salt solution, pH value of the system, etc. The phosphors were prepared by sintering the precursor at 1000 ～ 1200 ℃ in a weak reducing atmosphere for 2 h. The XRD, SEM, excitation spectra, emission spectra and afterglow decay of the samples were tested and the optimal synthesis conditions of the SrAl2O4: Eu2 , Dy3 long afterglow phosphors prepared by precipitation method were determined. The phosphor which had good luminescent properties is prepared and its persistent time can reach more than 1600 min. In the coprecipitation process, a small amount of glucose operates to refe the luminescent powders. The particle size of the phosphor can be less than 1 μm. The sintering temperature of the sample prepared by the coprecipitation method is much lower than that of the one prepared by the high temperature solid state method.Compared with the high temperature solid state method, a clear blue shift occurs in the excitation and emission spectra of the samples.     

Upconversion luminescence of Yb3+/Ho3+/Er3+/Tm3+ co-doped KGd(WO4)2 powders

Different lanthanide ions (Yb3+/Ho3+/Er3+/Tm3+) codoped KGd(WO4)2 phosphors were prepared by high-temperature solid-state reaction. The upconversion luminescence properties of two-ion and three-ion co-doped KGd(WO4)2 phosphors were investigated in detail. The concentration quenching effect of the two-ion co-doped KGd(WO4)2 phosphors was studied, and the optimum concentration of Ho3+, Er3+ and Tm3+ are 2 mol.%, 2 mol.% and 3 mol.%, respectively. The Yb3+/Ho3+/Tm3+ co-doped KGd(WO4)2 sample is the best white ...     

A series of Er~(3+)-activated SrLaGa_3O_7 single crystal fibers for mid-infrared laser application

A multidisciplinary approach for the production and characterization of a series of high concentration Er~(3+)activated SrLaGa_3 O_7(abbreviated as Er:SLGO) crystal fibers is shown to have a great promise for implementation in mid-infrared laser applications.The current approach includes the design and formation of unique layered tetrahedral network structures with several kinds of rare earth(RE) ions including Er ions distributing statistically between layers,such as Er:SLGO,Er,Nd:SLGO,Er,Yb,Ho:SLGO,Er,Eu:SLGO and Er,Ho:SLGO.Five kinds of Er:SLGO crystal fibers were designed to grow via a micropulling down method.Spectroscopic analyses show that Er,Yb,Ho:SLGO and Nd,Er:SLGO crystal fibers were superiorly endowed with inhomogeneous broadening absorption and strong emission.The unique structural components design enables the generation of improved absorption and emission recombination,and the inhibition of self-termination as well.Generally,the use of structural components design may warrant high-efficiency emissions in RE-doped crystal fibers.     

Broadband near-infrared luminescence and energy transfer of Cr~(3+),Ce~(3+) co-doped Ca_2LuHf_2Al_3O_(12) phosphors

Broadband near-infrared phosphors are highly desirable for food testing.Targeted Ca₂LuHf₂Al₃O₁₂:Cr³⁺(CLHA:Cr³⁺) and Ca₂LuHf₂Al₃O₁₂:Ce³⁺,Cr³⁺(CLHA:Ce³⁺,Cr^(³⁺)) phosphors were synthesized by the conventional high-temperature solid state reaction.The CLHA:Cr³⁺phosphor,with a good thermal stability,shows a red shift owing to radiation reabsorption and non-radiative transition with increasing Cr³⁺content.For co-doped sample,the emission intensity of Cr³⁺can be enhanced by three times due to the energy transfer from Ce³⁺to Cr³⁺,which can be evidenced by a significant overlap between the PLE of Cr³⁺single-doped phosphor and the PL of Ce³⁺single-doped phosphor.In addition,the mechanism of energy transfer is identified as a quadrupole-quadrupole interaction according to decay Lifetime and Dexter’s energy transfer formula.The broadband NIR emission peaked at 775 nm of CLHA:Cr³⁺,Ce³⁺phosphor shows a bright prospect in nondestructive quality-control analysis systems for food.     

Luminescence properties of Mn2） ions doped Lu2CaMg2Si3O1） garnet phosphors

Yttrium aluminum garnet structure phosphors Lu2CaMg2Si3O12:Mn2+ were synthesized by conventional high temperature solid-state reaction in reductive atmosphere. The structure and optical properties of samples were characterized by application of powder X-ray diffraction (XRD) and photoluminescence spectroscopy. Results of X-ray diffraction (XRD) analysis showed that the phosphors mainly presented garnet structure with a few weak peaks of impurity phases. Lu2-xCaMg2Si3O12:xMn2+ (x=0.01-0.8) phosphors showed a broad emission band peaking at around 590 nm under ultraviolet (UV) light of 408 nm when Mn2+ concentration was less than 0.08 mol. With an increase in the Mn2+ concentration (above 0.08), another broad emission band peaking at 720 nm besides 590 nm was observed, which may be due to manganese ion having different valence and occupying different host lattice. The critical quenching concentrations of manganese ion in the wavelength of 590 and 720 nm were about 0.06 and 0.2 mol, respectively. With 408 nm excitation wavelength, emission color of the samples had a red shift trend as the Mn2+ concentration increased. All the results indicated that the Lu2CaMg2Si3O12:Mn2+ phosphors could be applicable to n-UV based white LEDs.     

Ultraviolet to near-infrared energy transfer in NaYF_4:Nd~(3+),Yb~(3+) crystals

To convert ultraviolet(UV) light into near-infrared(NIR) light in phosphors is demanded for the development of solar cells.A series of NaYF_4:Nd~(3+),Yb~(3+) white powder samples were prepared via the hydrothermal method.The crystal structure and photoluminescence properties of the samples were carefully studied using X-ray diffractometry(XRD) and photoluminescence spectra.The excitation and emission spectra of NaYF_4:Nd~(3+),Yb~(3+) samples and the luminescence decay curves of Nd~(3+) and Yb~(3+) revealed an efficient energy transfer process from Nd~(3+) to Yb~(3+).This process resulted in the Yb~(3+) NIR fluorescent emission at 980 nm.Moreover,the lifetime of the Nd~(3+4)F_(3/2) level decreased with the increase of Yb~(3+) doping concentration.The build-up time of the decay curves of the Yb~(3+2)F_(5/2) level further verified the energy transfer process.Meanwhile,energy transfer efficiency based on different Yb~(3+) doping concentrations was achieved.     

Influence of annealing temperature on luminescent properties of Eu~(3+)/V~(5+) co-doped nanocrystalline Gd_2Ti_2O_7 powders

Nanosized Gd2(1-x)Eu2xTi2O7:yV5+ phosphors were prepared via sol-gel method and characterized with X-ray diffraction,Raman spectroscopy,diffuse reflectance spectra and photoluminescence spectra.Their PL properties were investigated as functions of the Eu3+ doping concentration and annealing temperature.The results indicated that the as-prepared samples showed a strong emission of Eu3+ under the irradiation of 303 nm.For Eu3+-doped Gd2Ti2O7,the orange emission at 586 nm was the strongest,which was correspond...     

Energy transfer mechanism of Sr_4Al_(14)O_(25):Eu~(2+) phosphor

Long lasting blue-green-emitting Sr4Al14O25:Eu2+ phosphors were synthesized by solid-state reactions.The phosphors were investigated by X-ray diffraction(XRD) and fluorescence spectrophotometer.A pure phase of Sr4Al14O25:Eu2+ phosphor was obtained at 1250 °C.There are two different types of Eu emission centers in Sr4Al14O25:Eu2+ phosphor.The effects of the Eu2+ concentration and the reducing temperature on the distribution of Eu2+ among different sites were investigated.The energy transfer mechanism between two different emission centers was elucidated via the investigation of thermal damage influence on the phosphorescence spectra,that is,the energy emitted from an Eu1 emission center could be reabsorbed by an Eu2 emission center.     

SrAl_2O_4:Eu~(2+),Dy~(3+)的发光性质及机理

研究了Eu2＋、Dy3＋共激活的SrAl2O4体系的发光性能和能量传输。结果表明，Dy3＋、Eu2＋共存时，Eu2＋的发光强度远远大于无Dy3＋时的发光强度，证明Dy3＋对Eu2＋的发光有敏化作用。Dy→Eu2＋能量传输的方式为籍助于载流子的能量输运。     

Fabrication and Luminescence Properties of Ca2Gd8(SiO4)6O2:Er3+ Phosphors via Sol-Gel Process

Ca2RE8(SiO4)6O2 (RE=Y, Gd, La) is a kind of ternary rare-earth-metal silicate with the oxyapatite structure, which was used as host materials for the luminescence of various rare earth and mercury-like ions. Ca2Gd8(SiO4)6O2:Er3 phosphors were prepared through the sol-gel process. X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicate that the phosphors crystallized completely at 1000 ℃. SEM study reveals that the average grain size is 400～1000 nm. In Ca2Gd8(SiO4)6O2:Er3 phosphors, the Er3 shows its characteristic green emission at 528 nm (2H11/2-4I15/2) and 548 nm(4S3/2-4I15/2) upon excitation into 382 nm, with an optimum doping concentration of 5% (mole fraction) of Gd3 in the host lattices.     

Energy transfer and frequency upconversion in Er~（3＋）-Yb~（3＋） codoped oxy-fluoro-tungstosilicate glasses

Er3+-Yb3+ codoped oxy-fluoro-tungstosilicate glasses with infrared-to-visible frequency upconversion luminescence were prepared by melting quenching in air.The effects of Er3+ doping on the optical properties of the samples were measured by means of techniques such as optical absorption spectra and photoluminescence spectra.The results showed that intense green and red signals centered at 546 and 665 nm,corresponding to the 4S3/2 → 4I15/2 and 4F9/2 → 4I15/2 transitions of Er3+ by a multiphoton stepwise phonon-assisted excited-state absorption process,respectively,were simultaneously observed by exciting the samples with a diode laser operating at 980 nm at room temperature.The upconversion process was found very sensitive to Er3+ content at a constant Yb2O3 content of 5 mol.%.With the increase of Er3+ content from 0.5% to 1.5%,the upconversion intensity increased gradually.Further increasing of Er3+ content to 3.0% resulted in a significant fluorescence quenching.Moreover,the possible upconversion mechanisms were discussed based on the energy-matching conditions and the quadratic dependence on excitation power.     

Photoluminescence properties of Ce3+ doped YSiO2N blue-emitting phosphors

Oxonitridosilicate phosphors with compositions of Y 1-x Ce x SiO 2 N (x=0-0.1) were synthesized by a new synthetic route based on a solid state reaction among YSi, CeSi, SiO 2 and Y 2 O 3 compounds at high temperature and high pressure. The photoluminescence properties dependent on Ce concentration and temperature were investigated. Concentration quenching occurred when the doped Ce 3+ concentration was more than 3 mol.%. The emission spectra showed red shifts from 430 to 447 nm with the increased Ce concentration from 0.5 mol.% to 10 mol.%. The quenching temperature was estimated as ～380 K. The chromaticity coordinates of the excitation and emission spectra were stable against the temperature. This study showed these YSiO 2 N:Ce 3+ phosphors the potential applications in the three-RGB phosphor-converted white LEDs.     

Luminescent properties and energy transfer of color-tunable Sr3Y2（SiO3）6：Ce3＋,Tb3＋ phosphors

Phosphors with controlled emission spectra are of great interest due to their application for white light emitting diodes.Herein, a new class of Sr3Y2（SiO3）6：Ce3＋,Tb3＋ phosphors were synthesized by a facile sol-gel combustion method. The phase structure,morphology, and luminescence properties of the phosphors were characterized by using powder X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, and photoluminescence excitation and emission spectra,respectively. The results on luminescence properties indicated that co-doped Ce3＋ ions served as UV-light sensitizers with excitation energy partially transferred to Tb3＋ ions, leading to green emission from Tb3＋. Particularly, the corresponding emitting colors of the phosphors could be well-tuned from deep blue（0.16, 0.05） to green region（0.25, 0.45） by adjusting the molar ratio of Ce3＋/Tb3＋.     

Luminescence properties of Tm^3＋/Yb^3＋, Er^3＋/Yb^3＋ and Ho^3＋/Yb^3＋ activated calcium tungstate

CaWO4 phosphor activated by the Tm3+/Yb3+,Er3+/Yb3+ and Ho3+/Yb3+ ions were synthesized by a traditional high-temperature solid-state method.The crystal structures and morphologies of the products were characterized by X-ray powders diffraction method(XRD) ,infrared spectra(FT-IR) and scanning electron microscopy(SEM) .The samples were found to show up-conversion luminescence properties.CaWO4 doped with Tm3+/Yb3+ showed blue luminescence characteristic of Tm(III) ion in the range of 460-485 nm,corresponding to the 1G4→3H6 electronic transition.CaWO4 doped with Er3+/Yb3+ showed strong green luminescence at 510-565 nm(2H11/2,4S3/2→4I15/2) and weak red luminescence at 640-685 nm(4F9/2→4I15/2) of Er(III) ion.CaWO4 doped with Ho3+/Yb3+ phosphor emitted green luminescence at 525-560 nm(5S2,5F4→5I8) and red luminescence at 630-670 nm(5F5→5I8) and at 730-770 nm(5S2,5F4→5I7) ,which is the characteristic of Ho(III) ion.     

Luminescent characteristics of LiCaBO3：Eu^3＋ phosphor for white light emitting diode

LiCaBO3:Eu3+ phosphor was synthesized by high solid-state reaction method, and its luminescent characteristics were investigated. The emission and excitation spectra of LiCaBO3:Eu3+ phosphors exhibited that the phosphors could be effectively excited by near ultraviolet (400 nm) and blue (470 nm) light, and emitted red light. The effect of Eu3+ concentration on the emission spectrum of LiCaBO3:Eu3+ phos-phor was studied. The results showed that the emission intensity increased with increasing Eu3～ concentration, and then decreased because of concentration quenching. It reached the maximum at 3mol.% Eu3+, and the concentration self-quenching mechanism was the d-d interaction according to the Dexter theory. Under the conditions of charge compensator Li+, Na+ or K+ incorporated in LiCaBO3, the emission intensities of LiCaBO3:Eu3+ phosphor were enhanced.     

Luminescent properties of MMgP_2O_7：Eu~（3＋）（M=Ca,Sr,Ba） phosphor

A series of red phosphors Eu3+-doped MMgP2O7(M=Ca,Sr,Ba) were synthesized by solid-state reaction method.X-ray powder diffraction(XRD) analysis confirmed the formation of pure CaMgP2O7,SrMgP2O7 and BaMgP2O7 phase.Photoluminescence spectra of MMgP2O7(M=Ca,Sr,Ba):Eu3+ phosphors showed a strong excitation peak at around 400 nm,which was coupled with the characteristic emission(350-400 nm) from UV light-emitting diode.The CaMgP2O7:Eu3+,SrMgP2O7:Eu3+ and BaMgP2O7:Eu3+ phosphors showed strong emission bands peaking at 612,593 and 587 nm,respectively.Due to the difference of the ion sizes between Ba2+(0.142 nm),Sr2+(0.126 nm),Ca2+(0.112 nm),Mg2+(0.072 nm) and Eu3+(0.107 nm),Eu3+ ions were expected to substitute for different sites in CaMgP2O7,SrMgP2O7 and BaMgP2O7 lattice.