Complete removal of pathogenic bacteria from drinking water using nano silver-coated cylindrical polypropylene filters

An attempt was made to investigate the removal of Escherichia coli bacteria from drinking water using nano silver-coated polypropylene water filter. For the production of nano silver filters, a modified Balzers 760 machine equipped with an electron beam gun was used. The nano-silver particles were made by electron beam bombardment of the silver metal, which were subsequently deposited on the polypropylene filters evenly. The thickness of the nano layer coated on the filters was 35.0 nm. The nano silver-coated filters were characterized using scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and atomic force microscopy. The antibacterial efficiency of the filters was evaluated using the membrane filter method. At a flow rate of 3 l/h, the output count of E. coli was zero after 7 h filtration when the input water had a bacterial load of 10³ colony-forming units (cfu) per milliliter. The inductively coupled plasma/mass spectrometry (ICP/MS) results showed that the 35 nm layer of the silver nanoparticles were stable on the water filter and were not washed away by water flow even after 72 h.     

Synergistic antibacterial activity of chitosan-silver nanocomposites on Staphylococcus aureus

The approach of combining different mechanisms of antibacterial action by designing hybrid nanomaterials provides a new paradigm in the fight against resistant bacteria. Here, we present a new method for the synthesis of silver nanoparticles enveloped in the biopolymer chitosan. The method aims at the production of bionanocomposites with enhanced antibacterial properties. We find that chitosan and silver nanoparticles act synergistically against two strains of Gram-positive Staphylococcus aureus (S.?aureus). As a result the bionanocomposites exhibit higher antibacterial activity than any component acting alone. The minimum inhibitory (MIC) and minimum bactericidal (MBC) concentrations of the chitosan-silver nanoparticles synthesized at 0?°C were found to be lower than those reported for other types of silver nanoparticles. Atomic force microscopy (AFM) revealed dramatic changes in morphology of S. aureus cells due to disruption of bacterial cell wall integrity after incubation with chitosan-silver nanoparticles. Finally, we demonstrate that silver nanoparticles can be used not only as antibacterial agents but also as excellent plasmonic substrates to identify bacteria and monitor the induced biochemical changes in the bacterial cell wall via surface enhanced Raman scattering (SERS) spectroscopy.     

Antibacterial activities of polyethylene glycol, tween 80 and sodium dodecyl sulphate coated silver nanoparticles in normal and multi-drug resistant bacteria

Antibacterial activity of silver nanoparticles coated with different functionalizing agents i.e., polyethylene glycol, tween 80 and sodium dodecyl sulphate were evaluated on both normal and multi-drug resistant strains of bacteria. Under the same reaction conditions, these functionalizing agents were added separately to coat silver nanoparticles. Among these, polyethylene glycol coated nanoparticles were most effective in killing all the bacterial strains which includes Escherichia coli DH5a, Bacillus subtilis, Micrococcus luteus, Staphylococcus aureus and multi-drug resistant clinical isolates of Shigella spp. (flexneri, boydii, sohnea) and Vibrio cholerae. The minimum inhibitory concentration of polyethylene glycol coated silver nanoparticles was also less compared to the other two sets of nanoparticles. Consistence with that polyethylene glycol coated nanoparticles produced more intracellular reactive oxygen species in bacteria. Moreover, when human cell lines MCF7 and Chang Liver were incubated in presence of these nanoparticles for 18 h with same concentrations as used for bacteria, no toxicity was observed. But significant increase in cell killing was observed with longer incubation time. Thus our present investigation implicates the potential therapeutic use of silver nanoparticles as antibacterial agent particularly the polyethylene glycol coated one.     

Enhanced antibacterial effect of silver nanoparticles obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media

In the present study, we report enhanced antimicrobial properties of 29 and 23 nm silver nanoparticles (Ag NPs) obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media. Antibacterial activity assessed by disk diffusion method indicates that silver nanoparticles produced inhibition zones for both Escherichia coli and Staphylococcus aureus depending on silver concentration. The bacterial growth curve performed in the presence of silver nanoparticles showed a stronger antibacterial effect at lower concentrations than those described in the earlier reports. The effect was both dose and size dependent and was more pronounced against Gram negative bacteria than Gram positive one. The smallest Ag NPs used had a bactericidal effect resulting in killing E. coli cells. Scanning electron microscopy analysis indicated major damage and morphology changes of the silver nanoparticles treated bacterial cells. The major mechanism responsible for the antibacterial effect probably consists in clusters formation and nanoparticles anchorage to the bacterial cell surface.     

Evaluation of anti‐bacterial activity of silver nanoparticles synthesised by coprophilous fungus PM0651419

The study explored biological synthesis of metallic silver nanoparticles (AgNPs) from the less explored non‐pathogenic coprophilous fungus, sterile mycelium, PM0651419 and evaluates the antimicrobial efficacy of biosynthesised AgNPs when impregnated in wound fabrics and in combination with six antimicrobial agents. AgNPs alone proved to be potent antibacterial agents and in combination they enhanced the antibacterial activity and spectrum of antibacterials used in the study against a microbiologically diverse battery of Gram positive, Gram negative and multidrug‐resistant bacteria. AgNPs impregnated on the wound dressings established their antibacterial activity by significantly reducing the bacterial load of pathogenic bacteria like Staphylococcus aureus and Bacillus subtilis e stablishing potential as effective antimicrobial wound dressings for treatment of polymicrobial wound infections. This study presents the first report on the potential of biosynthesis of AgNPs from the under explored class of coprophilous fungi. Their promise to be used in wound dressings and as potent antibacterials alone and in combination is evaluatedInspec keywords: silver, nanoparticles, nanofabrication, nanomedicine, biomedical materials, microorganisms, antibacterial activity, wounds, fabricsOther keywords: antibacterial activity, coprophilous fungus PM0651419, biological synthesis, metallic silver nanoparticles, nonpathogenic coprophilous fungus, sterile mycelium, antimicrobial efficacy, biosynthesised AgNPs, wound fabrics, microbiologically diverse battery, Gram positive bacteria, Gram negative bacteria, multidrug‐resistant bacteria, wound dressings, bacterial load, pathogenic bacteria, Staphylococcus aureus, Bacillus subtilis, polymicrobial wound infections, Ag     

Factors affecting the antibacterial activity of chitosan‐silver nanocomposite

This study provides the optimum preparation parameters of chitosan‐silver nanoparticles composite (CSNC) with promising antibacterial activity against the most common bacterial infections found on burn wounds. CSNC was synthesised by simple green chemical reduction method with different preparation factors. Chitosan was used to reduce silver nitrate and stabilise silver nanoparticles in the medium. For this reason, spectroscopic and microscopic techniques as, ultraviolet‐visible Fourier transform infrared spectroscopy and transmission electron microscopy were used in the study of the molecular and morphological properties of the resultant composites. Furthermore, the composite was assessed in terms of Ag‐ions release by AAS and its efficacy as antibacterial material. As a result, CSNC showed stronger antibacterial effect than its individual components (chitosan and silver nitrate solutions) towards Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa and Escherichia coli) bacteria. CSNC prepared in this study showed highest inhibition percentage of bacterial growth up to 96% at concentration of 220 μg/ml.Inspec keywords: silver, nanocomposites, nanoparticles, filled polymers, biomedical materials, nanomedicine, antibacterial activity, wounds, reduction (chemical), ultraviolet spectra, visible spectra, Fourier transform spectra, infrared spectra, transmission electron microscopy, microorganisms, nanofabricationOther keywords: antibacterial activity, chitosan‐silver nanocomposite, optimum preparation parameters, chitosan‐silver nanoparticles composite, CSNC, bacterial infections, burn wounds, green chemical reduction method, ultraviolet‐visible Fourier transform infrared spectroscopy, transmission electron microscopy, molecular properties, morphological properties, Gram‐positive bacteria, Gram‐negative bacteria, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, bacterial growth, Ag     

Antibacterial activity and increased freeze-drying stability of sialyllactose-reduced silver nanoparticles using sucrose and trehalose

The resistance to current antibiotics results in the emergence of health-threatening bacteria. Silver nanoparticles are known to exhibit broad-spectrum antibacterial activities without the development of resistance. Herein, we developed a green synthetic method for the preparation of silver nanoparticles with sialyllactose instead of toxic chemicals as a reducing agent, which would improve its therapeutic applicability and increase its biocompatibility. Oven incubation, autoclaving and microwave irradiation methods were applied to prepare the silver nanoparticles. High resolution-transmission electron microscopy and atomic force microscopy images revealed mostly spherical and amorphous silver nanoparticles with an average diameter of 23.64 nm. Fourier Transform-infrared spectra suggest that the N-H amide of sialyllactose might be involved in the binding of silver nanoparticles. Based on thermogravimetric analyses, 2,3-sialyllactose-reduced silver nanoparticles are composed of 54.3 wt% organic components and 45.7 wt% metallic silver. Enhanced antibacterial activities of silver nanoparticles (approximately 8-fold) were observed against Pseudomonas aeruginosa, Escherichia coli and Salmonella typhimurium (minimum inhibitory concentration 16 microg/mL). Next, we employed the use of carbohydrate stabilizers to increase the stability of silver nanoparticles during a freeze-drying process. It was found that sucrose and trehalose were the most effective stabilizers. In addition, silver nanoparticles possessed excellent salt stability as well as on-the-shelf stability in the presence of these stabilizers. Derivatives of sialic acid are known to be anti-influenza agents; therefore, the newly prepared silver nanoparticles may serve as useful antibacterial and antiviral agents to cope with both pathogenic bacteria and viruses in the near future.     

Characterization of antibacterial silver coated yarns

Surface treatments of textile fibers and fabrics significantly increase their performances for specific biomedical applications. Nowadays, silver is the most used antibacterial agent with a number of advantages. Among them, it is worth to note the high degree of biocompatibility, an excellent resistance to sterilization conditions, antibacterial properties with respect to different bacteria associated with a long-term of antibacterial efficiency. However, there are only a few antibacterial fibres available, mainly synthetic with high production cost and limited effectiveness. Cotton yarns with antimicrobial properties are most suitable for wound healing applications and other medical treatments thanks to their excellent moisture absorbance while synthetic based fibres are most suitable for industrial applications such as automotive tapestry and air filters. The silver-coated fibers were developed applying an innovative and low cost silver deposition technique for natural and synthetic fibers or yarns. The structure and morphology of the silver nanoclusters on the fibers was observed by scanning electron microscopy (SEM), atomic force microscopy analysis (AFM) and XRD analysis, and quantitatively confirmed by thermogravimetric analysis (TGA) measurements. Good silver coating stability has been confirmed performing several industrial washing. Antimicrobial tests with Escherichia coli were performed.     

Antibacterial applications of elemental nanomaterials

The emergence and spread of antimicrobial resistance call for the development of antibacterial substances that may be able to circumvent the resistance mechanisms of bacteria. To this end, intensive research efforts have been directed toward non-antibiotic materials with antibacterial potency. In particular, single-element inorganic nanomaterials have demonstrated promising activity against bacteria, and prominent examples of single-element inorganic nanomaterials include silver (Ag) nanoparticles, 0-, 1- and 2-dimensional carbon nanomaterials, and 2-dimensional black phosphorous (BP) nanosheets. With activity modes distinct from those of commercial antibiotics, these single-element inorganic nanomaterials have demonstrated activity against antibiotic-resistant bacterial strains and may delay the emergence of resistance in bacteria. In this review, we focus on silver (Ag) nanoparticles, 0-, 1- and 2-dimensional carbon nanomaterials, and 2-dimensional black phosphorous (BP) nanosheets, and discuss their antibacterial potency, factors that influence their antibacterial performances, as well as their cytotoxicity to mammalian cells.     

Green synthesis of silver nanoparticles using Glaucium corniculatum (L.) Curtis extract and evaluation of its antibacterial activity

The metal nanoparticles, due to interesting features such as electrical, optical, chemical and magnetic properties, have been investigated repeatedly. Also, the mentioned nanoparticles have specific uses in terms of their antibacterial activity. The biosynthesis method is more appropriate than the chemical method for producing the nanoparticles because it does not need any special facilities; it is also economically affordable. In the current study, the silver nanoparticles (AgNPs) were obtained by using a very simple and low‐cost method via Glaucium corniculatum (L.) Curtis plant extract. The characteristics of the AgNPs were investigated using techniques including: X‐ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy. The SEM and TEM images showed that the nanoparticles had a spherical shape, and the mean diameter of them was 53.7 and 45 nm, respectively. The results of the disc diffusion test used for measuring the anti‐bacterial activity of the synthesised nanoparticles indicated that the formed nanoparticles possessed a suitable anti‐bacterial activity.Inspec keywords: silver, nanoparticles, antibacterial activity, nanomedicine, nanofabrication, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectraOther keywords: green synthesis, silver nanoparticles, Glaucium corniculatum Curtis extract, antibacterial activity, metal nanoparticles, biosynthesis method, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, SEM, TEM, spherical shape, disc diffusion test, Ag     

Biocompatible nano-gallium/hydroxyapatite nanocomposite with antimicrobial activity

Intensive research in the area of medical nanotechnology, especially to cope with the bacterial resistance against conventional antibiotics, has shown strong antimicrobial action of metallic and metal-oxide nanomaterials towards a wide variety of bacteria. However, the important remaining problem is that nanomaterials with highest antibacterial activity generally express also a high level of cytotoxicity for mammalian cells. Here we present gallium nanoparticles as a new solution to this problem. We developed a nanocomposite from bioactive hydroxyapatite nanorods (84?wt %) and antibacterial nanospheres of elemental gallium (16?wt %) with mode diameter of 22?±?11?nm. In direct comparison, such nanocomposite with gallium nanoparticles exhibited better antibacterial properties against Pseudomonas aeruginosa and lower in-vitro cytotoxicity for human lung fibroblasts IMR-90 and mouse fibroblasts L929 (efficient antibacterial action and low toxicity from 0.1 to 1?g/L) than the nanocomposite of hydroxyapatite and silver nanoparticles (efficient antibacterial action and low toxicity from 0.2 to 0.25?g/L). This is the first report of a biomaterial composite with gallium nanoparticles. The observed strong antibacterial properties and low cytotoxicity make the investigated material promising for the prevention of implantation–induced infections that are frequently caused by P. aeruginosa.     

Development of silver nano-coatings on silk sutures as a novel approach against surgical infections

The infections give rise to a range of clinical problems and prolong hospitalization with increased healthcare costs. Moreover, persistent infections exasperate the problem of antibiotic resistance. The aim of this study was the development of effective and low-cost antibacterial silver coatings on surgical sutures by adopting an innovative photochemical deposition process to prevent early contamination of surgical wounds. The silver deposition technology adopted in this work is an innovative process based on the in situ photoreduction of a silver solution. The samples were dipped in the silver solution and then exposed to UV radiation in order to induce the synthesis of silver clusters on the surface of the suture. The homogeneous distribution of silver particles on the surface and on the cross-section of the treated sutures was demonstrated. All the antibacterial studies clearly demonstrated that the use of novel silver treated sutures could represent clinical advantages in terms of the prevention of surgical infections against bacterial colonization. The silver coating deposited on the sutures demonstrated no cytotoxic effect on a selected cell population. The results obtained suggested that the antibacterial silver-coated sutures developed in this work could represent an interesting alternative to conventional sutures, with evident advantages in terms of prevention of the surgical infections and on the health costs. In addiction, very low concentrations of silver significantly inhibited the microbial load, without affecting the cell viability.     

Antibacterial performance of polydopamine-modified polymer surfaces containing passive and active components

A growing number of device-related nosocomial infections, elevated hospitalization costs, and patient morbidity necessitate the development of novel antibacterial strategies for clinical devices. We have previously demonstrated a simple, aqueous polydopamine dip-coating method to functionalize surfaces for a wide variety of uses. Here, we extend this strategy with the goal of imparting antifouling and antimicrobial properties to substrates, exploiting the ability of polydopamine to immobilize polymers and induce metal nanoparticle formation. Polydopamine was deposited as a thin adherent film of 4 nm thickness from alkaline aqueous solution onto polycarbonate substrates, followed by grafting of antifouling polymer polyethylene glycol and in situ deposition of silver nanoparticles onto the polydopamine coated polycarbonate substrates. Elemental and morphological surface analyses confirmed successful grafting of polyethylene glycol brushes onto polydopamine-coated substrates, as well as spontaneous silver nanoparticle formation for polydopamine-coated substrates incubated in silver-nitrate solutions. Sustained silver release was observed over at least 7 days from silver-coated substrates, and the release kinetics could be modulated via additional polydopamine overlayers. In vitro functional assays employing gram negative and positive strains demonstrated dual fouling resistance and antibacterial properties of the coatings due to the fouling resistance of grafted polyethylene glycol and antibacterial effect of silver, respectively. Polycarbonate substrates coated only with silver using a method similar to existing commercial coatings provided an antibacterial effect but failed to inhibit bacterial attachment. Taking into account the previously demonstrated substrate versatility of polydopamine coatings, our findings suggest that this strategy could be implemented on a variety of substrate materials to simultaneously improve antifouling and antimicrobial performance.     

Study of mechanism of enhanced antibacterial activity by green synthesis of silver nanoparticles

The extensive use of silver nanoparticles needs a synthesis process that is greener without compromising their properties. The present study describes a novel green synthesis of silver nanoparticles using Guava (Psidium guajava) leaf extract. In order to compare with the conventionally synthesized ones, we also prepared Ag-NPs by chemical reduction. Their optical and morphological characteristics were thoroughly investigated and tested for their antibacterial properties on Escherichia coli. The green synthesized silver nanoparticles showed better antibacterial properties than their chemical counterparts even though there was not much difference between their morphologies. Fourier transform infrared (FTIR) spectroscopic analysis of the used extract and as-synthesized silver nanoparticles suggests the possible reduction of Ag(+) by the water-soluble ingredients of the guava leaf like tannins, eugenol and flavonoids. The possible reaction mechanism for the reduction of Ag(+) has been proposed and discussed. The time-dependent electron micrographs and the simulation studies indicated that a physical interaction between the silver nanoparticles and the bacterial cell membrane may be responsible for this effect. Based on the findings, it seems very reasonable to believe that this greener way of synthesizing silver nanoparticles is not just an environmentally viable technique but it also opens up scope to improve their antibacterial properties.     

Fabrication of silver-loaded hollow mesoporous aluminosilica nanoparticles and their antibacterial activity

A facile and an effective route for the preparation of silver-loaded hollow mesoporous aluminosilica ([Ag]-HMAS) nanoparticles is reported. In our fabrication process, the solid silica nanoparticles are first converted into high-quality hollow mesoporous aluminosilica particles, and then silver ions are induced into the matrix through an ion-exchange method. By EDX and ICP analysis, it is found that the final [Ag]-HMAS particles have high silver loading (15.8 % by weight), and the release amount of silver ions can be effectively controlled by altering the concentrations of Na⁺ in the solution. The antibacterial properties of the [Ag]-HMAS particles against Escherichia coli (Gram-negative bacteria) and Bacillus subtilis (Gram-positive bacteria) are also investigated, both in liquid systems and on solid agar plates. The results show that the [Ag]-HMAS particles are highly effective against both Gram-negative and Gram-positive bacteria.     

Synthesis of Starch-Stabilized Silver Nanoparticles and Their Antimicrobial Activity

In this study, silver nanoparticles were prepared using silver nitrate as the metal precursor, starch as protecting agent, and sodium borohydride (NaBH₄) as a reducing agent by the chemical reduction method. The formation of the silver nanoparticles was monitored using ultraviolet-visible absorption spectroscopy, cyclic voltammetry, and particle size analyzer and characterized by transmission electron microscopy (TEM) and x-ray diffraction (XRD). Synthesis of nanoparticles were carried out by varying different parameters, such as reaction temperature, concentration of reducing agent, concentration of silver ion in feed solution, type and concentration of the stabilizing agent, and stirrer speed expressed in terms of particle size and size distribution. Dispersion destabilization of colloidal nanoparticles was detected by Turbiscan. It was observed that size of the starch stabilized silver nanoparticles were lower than 10 nm. The microbial activity of synthesized silver nanoparticles was examined by modified Kirby-Bauer disk diffusion method. Silver nanoparticles were tested for their antibacterial activity against Gram negative bacteria such as Escherichia coli, Pseudomonas aeruginosa, and Gram positive bacteria such as Staphylococcus aureus and Staphylococcus epidermidis. High bacterial activity was observed at very low concentrations of silver (below 1.39 μg/ml). The antifungal activity of silver nanoparticles has been assayed against Candida albicans.     

Vancomycin-functionalised Ag@TiO2 phototoxicity for bacteria

This study reports on the synthesis of vancomycin (Van)-functionalised Ag@TiO(2) nanoparticles and their enhanced bactericidal activities. Van-Ag@TiO(2) nanoparticles were prepared by nanoparticle deposition and chemical cross-linking reactions. The catalysts showed high efficiency for the degradation of methylene blue under ultraviolet (UV) illumination. The photocatalytic inactivation of the sulphate-reducing bacteria, Desulfotomaculum, was also studied under UV light irradiation and in the dark using aqueous mixtures of Ag, Ag@SiO(2), Ag@TiO(2), and Van-Ag@TiO(2). The Van-Ag@TiO(2) nanoparticles showed a capacity to target Van-sensitive bacteria. They also effectively prevented bacterial cell growth through the functionalised nanoparticles under UV irradiation for 1h. To investigate the specificity of the catalyst phototoxicity, a Van-resistant bacteria, Vibrio anguillarum, was used as the negative control. The results indicated that Van-Ag@TiO(2) nanoparticles had a higher selective phototoxicity for Van-sensitive bacteria. Therefore, the antibiotic molecule-functionalised core-shell nanoparticles allow for selective photokilling of pathogenic bacteria.     

Specific Chemiluminescence Imaging and Enhanced Photodynamic Therapy of Bacterial Infections by Hemin-Modified Carbon Dots

Antibacterial photodynamic therapy (aPDT) is a promising antibiotics-alternative strategy for bacterial infectious diseases, which features broad-spectrum antibacterial activity with a low risk of inducing bacterial resistance. However, clinical applications of aPDT are still hindered by the hydrophobicity-caused inadequate photodynamic activity of conventional photosensitizers and the hypoxic microenvironment of bacterial infections. To address these problems, herein, a promising strategy is developed to achieve specific chemiluminescence (CL) imaging and enhanced PDT of bacterial infections using hemin-modified carbon dots (H-CDs). The H-CDs can be facilely prepared and exhibit favorable water solubility, augmented photodynamic activity, and unique peroxidase-mimicking capacity. Compared with the free CDs, the photodynamic efficacy of H-CDs is significantly augmented due to the increased electron–hole separation efficiency. Moreover, the peroxidase catalytic performance of H-CDs enables not only infection identification via bacterial infection microenvironment-responsive CL imaging but also oxygen self-supplied aPDT with hypoxia-relief-enhanced bacteria inactivation effects. Finally, the enhanced aPDT efficiencies of H-CDs are validated in both in vivo abscess and infected wound models. This work may provide an effective antibacterial platform for the selective imaging-guided treatment of bacterial infections.     

Antibacterial magnetic nanoparticles for therapeutics: a review

Along with the extensive range of exotic nanoparticle (NPs) applications, investigation of magnetic NPs (MNPs) in vitro has ushered modern antibacterial studies into an increasingly attractive research area. A great number of microorganisms exist in the size scales from nanometre to micrometre regions. The enormous potential of engineered MNPs in therapeutic procedures against various drug‐resistant bacteria has declined the menace of fatal bacterial infections. Many biocompatible MNPs have been introduced that possess remarkable impacts on various bacterial strains. Conventional synthesis methods such as co‐precipitation or hydrothermal techniques have been widely adopted in the production of MNPs. The MNPs for antibacterial applications are mainly required to be superparamagnetic, recyclable and biocompatible. To implement novel strategies in developing new generation antimicrobial magnetic nanomaterials, it is essential to obtain a comprehensive preview of recent achievements in synthesis, proposed antibacterial mechanisms and characterisation techniques of these nanomaterials. This review highlights notable aspects of antibacterial activity in engineered MNPs and nanocomposites including their particle properties (size, shape and saturation magnetisation), antibacterial mechanisms, synthesis methods, testing methods, surface modifications and minimum inhibitory concentrations.Inspec keywords: nanocomposites, magnetic particles, biomedical materials, antibacterial activity, nanofabrication, nanoparticles, drugs, precipitation (physical chemistry), reviews, nanomagnetics, superparamagnetism, nanomedicineOther keywords: drug‐resistant bacteria, fatal bacterial infections, bacterial strains, conventional synthesis methods, antibacterial applications, antibacterial activity, exotic nanoparticle applications, antibacterial mechanisms, antimicrobial magnetic nanomaterials, antibacterial MNP, biocompatible MNP, in vivo magnetic nanoparticle, review, hydrothermal techniques, superparamagnetism, nanocomposites, surface modifications     

Production,stabilisation and characterisation of silver nanoparticles coated with bioactive polymers pluronic F68, PVP and PVA

The increasing and alarming panorama of bacterial infections and associated morbidities that occur during medical and hospital procedures makes the development of technologies that aid in controlling such bacterial infections of utmost importance. Recent studies have shown that formulations with metal nanoparticles exhibit good antibacterial properties against a broad spectrum of microorganisms. Moreover, it was demonstrated that some biologically active polymeric materials, when applied in combination with chemical antimicrobial agents, enhance the therapeutic action of the latter. The research effort entertained herein aimed at the physico‐chemical characterisation of silver nanoparticles obtained by chemical reduction, stabilised by bioactive polymers polyvinyl alcohol and polyvinylpyrrolidone, and further co‐stabilised by pluronic F68. Scanning electron microscopy images of the nanoparticles produced, coated with different stabilisers, have shown that the chemical nature of the stabilisation effect promoted incorporation of pluronic in the nanoparticles and was closely related to an increase in the silver concentration in the nanoparticle samples obtained via energy‐dispersive X‐ray spectroscopy. The study described herein also shows that the nature of the stabiliser favours the interaction of pluronic F68 with samples containing silver nanoparticles.Inspec keywords: silver, nanoparticles, polymer films, coatings, nanocomposites, nanofabrication, microorganisms, biomedical materials, nanomedicine, antibacterial activity, reduction (chemical), scanning electron microscopy, X‐ray chemical analysisOther keywords: bioactive polymers pluronic F68 coated silver nanoparticles, PVP coated silver nanoparticles, PVA coated silver nanoparticles, bacterial infections, associated morbidities, medical procedures, hospital procedures, antibacterial properties, microorganisms, biologically active polymeric materials, chemical antimicrobial agents, therapeutic action, physicochemical characterisation, chemical reduction, bioactive polymers polyvinyl alcohol, polyvinylpyrrolidone, scanning electron microscopy, stabilisation effect, energy‐dispersive X‐ray spectroscopy, Ag