Surface modification of ethylene copolymers moulded against different mould surfaces-1. Surface enrichment by functional groups

A polymer surface chemical composition can be changed by the influence of different environments. Results presented from this study show that the surface of the mould influences the outermost polymer surface by enriching it with specific functional groups. This was done by moulding random copolymers against polymer films with low and high surface energies. The values presented are interpreted in terms of differences in surface energy between the mould surface and the copolymer. The random copolymers used were poly(ethylene-co-vinylacetate) (EVA) and poly(ethylene-co-acrylic acid) (EAA), both with a different comonomer content. The copolymers were moulded in contact with mould surfaces made of polymer films which were perfluorinated ethylene propylene copolymer (FEP), poly(tetrafluoroethylene) (PTFE), and poly(ethylene terephthalate) (PET). The resultant surfaces were characterized by X-ray photoelectron spectroscopy (XPS or ESCA) and contact angle measurements The surface content of acrylic acid functional groups increased in the case of EAA copolymer moulded against PET, and decreased when moulded against FEP as compared to the bulk concentration. EVA copolymers were found to be enriched in acetate groups when moulded against FEP and deficient when moulded against PET. The contact angle measurements together with the XPS measurements showed significant differences between materials moulded in contact with low and high energy surfaces. A low molecular weight additive (an internal release agent), in an EVA copolymer, was found to be enriched at the moulded polymer surface when a PET film was used as mould surface. A material transfer was also found to occur from the solid polymer films to the moulded polymer surface.     

Surface properties of an anhydride-epoxy resin cured against different mould surfaces

An epoxy resin consisting of diglycidylether of bisphenol A (DGEBA) and methyltetrahydrophthalic anhydride (MTHPA) was cured against moulds with different surface characteristics: poly(ethylene terephthalate) (PET), perfluorinated ethylene propylene copolymer (FEP), and air. The epoxy surfaces were analysed using contact angle measurements and X-ray photoelectron spectroscopy (XPS). The results presented are interpreted in terms of differences in surface energy between the surface of the mould and the epoxy resin. With PET as the mould surface, the surface content of ester groups resulting from the anhydride increased as compared to the average bulk content. With the non-polar FEP mould, the amount of ester groups decreased instead. Shear tests on overlap joints obtained by adhesive bonding with polyurethane and epoxy adhesives showed, however, a high adhesive joint strength, both for epoxy surfaces obtained with FEP as mould, and for ground surfaces with a bulk composition. The surfaces generated in PET moulds yielded only poor adhesive joint strength. These differences in joint strength could be related to the concentration of reactive functional groups (-OH, -COOH) in the outermost surface of the cured epoxy resin.     

Surface modification of poly(tetrafluoroethylene) with pulsed hydrogen plasma

Surface modification of polymers by pulsed plasma has been investigated to minimize degradation reactions occurring at the same time as the surface modification reactions. The hydrogen radical, ion, and electron concentrations in the hydrogen plasma were simulated as a function of the elapsed time after turning off the discharge. The contact angle measurement showed that hydrogen plasma treatment, regardless of pulsed or continuous plasma, led to degradation reactions as well as defluorination and oxidation on PTFE surfaces. The degradation reactions of PTFE chains initiated by the pulsed hydrogen plasma were not as vigorous as those by the continuous hydrogen plasma. A combination of the on‐time/off‐time of 30/270μs in the pulsed hydrogen plasma was efficacious in modifying PTFE surfaces. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 340–348, 2002     

Surface modification and degradation of poly(lactic acid) films by Ar-plasma

Surface modification of poly(lactic acid) (PLA) film surface by Ar-plasma was investigated by contact angle measurements and XPS in order to answer the following two questions. (1) Could the Ar-plasma modify the PLA film surfaces? (2) What chemical reactions occurred on the film surfaces during the Ar-plasma treatment? The Ar-plasma treatment did not lead to hydrophilic modification of the PLA film surface, but to degradation reactions of the PLA film. Poor modification may be due to instability of the carbon radicals formed from C—O bond scission in the PLA chains by the Ar-plasma.     

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 2. Poly(lactide) with high stereoregularity

Blending poly(ethylene glycol) (PEG) with poly(lactide) (PLA) decreases the T_g and improves the mechanical properties. The blends have lower modulus and increased fracture strain compared to PLA. However, the blends become increasingly rigid over time at ambient conditions. Previously, it was demonstrated that a PLA of lower stereoregularity was miscible with up to 30 wt% PEG. Aging was due to slow crystallization of PEG from the homogeneous amorphous blend. Crystallization of PEG depleted the amorphous phase of PEG and gradually increased the T_g until aging essentially ceased when T_g of the amorphous phase reached the aging temperature. In the present study, this aging mechanism was tested with a crystallizable PLA of higher stereoregularity. Changes in thermal transitions, solid state structure, and mechanical properties were examined over time. Blends with up to 20 wt% PEG were miscible. Blends with 30 wt% PEG could be quenched from the melt to the homogenous amorphous glass. However, this composition phase separated at ambient temperature with little or no crystallization. Changes in mechanical properties during phase separation reflected increasing rigidity of the continuous PLA-rich phase as it became richer in PLA. Construction of a phase diagram for blends of higher stereoregular PLA with PEG was attempted.     

Preparation of hydrophilic woven fabrics: Surface modification of poly(ethylene terephthalate) by grafting of poly(vinyl alcohol) and poly(vinyl alcohol)-g-(N-vinyl-2-pyrrolidone)

One of the most industrially important synthetic textile materials, woven poly(ethylene terephthalate) (PET) fabrics, have limitations in the usage of casual apparel applications due to their unwanted hydrophobicity. For that reason, in this study, to impart permanent hydrophilicity to the PET fabrics, hydrophilic poly(vinyl alcohol) (PVA) and a PVA-based copolymer were introduced to the alkaline hydrolysis pretreated PET surface by graft copolymerization for the first time. The graft modification of PET fabric surface was performed with an industrial-adaptable approach. The synthesis of a novel PVA-g-(N-vinyl-2-pyrrolidone) copolymer was achieved by the introduction of glycidyl methacrylate monomer to the PVA backbone. The structure of the copolymer was evidenced by attenuated total reflection–Fourier transform infrared spectroscopy and ¹H-NMR techniques. The introduction of PVA and copolymer structures with desired functional groups to the PET fabric surface was confirmed with the X-ray photoelectron spectroscopy technique. It was obtained that the contact angle–wetting time of PET fabric (145° and 98 s) could be dropped to 37° and 0.1 s and 64° and 0.7 s after PVA and copolymer grafting, respectively. This suggests that the graft-modified PET fabrics may find the potential of use in the textile applications as the alternative hydrophilic materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48584.     

Synthesis and characterization of copolymers with the same proportions of polystyrene and poly(ethylene oxide) compositions but different connection sequence by the efficient Williamson reaction

The AB type diblock PS‐b‐PEO and ABA type triblock PS‐b‐PEO‐b‐PS copolymers containing the same proportions of polystyrene (PS) and poly(ethylene oxide) (PEO) but different connection sequence were synthesized and investigated. Using the sequential living anionic polymerization and ring‐opening polymerization mechanisms, diblock PS‐b‐PEO copolymers with one hydroxyl group at the PEO end were obtained. Then, using the classic and efficient Williamson reaction (realized in a ‘click’ style), triblock PS‐b‐PEO‐b‐PS copolymers were achieved by a coupling reaction between hydroxyl groups at the PEO end of PS‐b‐PEO. The PS‐b‐PEO and PS‐b‐PEO‐b‐PS copolymers were well characterized by ¹H NMR spectra and SEC measurements. The critical micelle concentration (CMC) and thermal behaviors were also investigated by steady‐state fluorescence spectra and DSC, respectively. The results showed that, because the PEO segment in triblock PS‐b‐PEO‐b‐PS was more restricted than that in diblock PS‐b‐PEO copolymer, the former PS‐b‐PEO‐b‐PS copolymer always gave higher CMC values and lower crystallization temperature (T_c), melting temperature (T_m) and degree of crystallinity (X_c) parameters. © 2015 Society of Chemical Industry     

Synthesis and characterisation of poly(arylene sulphides): Part 10. A comparative evaluation of the thermoanalytical behaviour and curing of poly(1,4-phenylene sulphide) and copolymers containing 1,4-phenylene sulphide and 2-methyl-1,4-phenylene sulphide repeat units

Thermogravimetry, differential scanning calorimetry and curing studies were used to assess the viability of random and block copolymers comprising 1,4-phenylene sulphide and 2-methyl-1,4-phenylene sulphide repeat units as alternatives to poly(1,4-phenylene sulphide) (PPS). The properties of the copolymers are discussed critically and compared with those of the parent homopolymers PPS and poly(2-methyl-1,4-phenylene sulphide) (PMPS). The results suggest that (a) random copolymers with low PMPS contents would offer the best compromise between PPS and PMPS properties, and (b) more desirable physical properties might be achieved from systems containing a less reactive 2-substituted-1,4-phenylene sulphide comonomer repeat unit.     

A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites

Carbon materials particularly in the form of sparkling diamonds have held mankind spellbound for centuries, and in its other forms, like coal and coke continue to serve mankind as a fuel material, like carbon black, carbon fibers, carbon nanofibers and carbon nanotubes meet requirements of reinforcing filler in several applications. All these various forms of carbon are possible because of the element's unique hybridization ability. Graphene (a single two-dimensional layer of carbon atoms bonded together in the hexagonal graphite lattice), the basic building block of graphite, is at the epicenter of present-day materials research because of its high values of Young's modulus, fracture strength, thermal conductivity, specific surface area and fascinating transport phenomena leading to its use in multifarious applications like energy storage materials, liquid crystal devices, mechanical resonators and polymer composites. In this review, we focus on graphite and describe its various modifications for use as modified fillers in polymer matrices for creating polymer-carbon nanocomposites.     

Modifications of carbon for polymer composites and nanocomposites

The various forms of carbon used in composite preparation include mainly carbon-black, carbon nanotubes and nanofibers, graphite and fullerenes. This review presents a detailed literature survey on the various modifications of the carbon nanostructures for nanocomposite preparation focusing upon the works published in the last decade. The modifications of each form of carbon are considered, with a compilation of structure-property relationships of carbon-based polymer nanocomposites. Modifications in both bulk and surface modifications have been reviewed, with comparison of their mechanical, thermal, electrical and barrier properties. A synopsis of the applications of these advanced materials is presented, pointing out gaps to motivate potential research in this field.