Use of rice husk ash as filler in natural rubber vulcanizates: In comparison with other commercial fillers

Rice husk ash is mainly composed of silica and carbon black remaining from incomplete combustion. Both silica and carbon black have long been recognized as the main reinforcing fillers used in the rubber industry to enhance certain properties of rubber vulcanizates, such as modulus and tensile strength. In this study, two grades of rice husk ash (low‐ and high‐carbon contents) were used as filler in natural rubber. Comparison was made of the reinforcing effect between rice husk ashes and other commercial fillers such as talcum, china clay, calcium carbonate, silica, and carbon black. Fourier transform infrared spectroscopy (FTIR) analysis was employed to study the presence of functional groups on the ash surface. The effect of silane coupling agent, bis(3‐triethoxysilylpropyl)tetrasulfane (Si‐69), on the properties of ash‐filled vulcanizates was also investigated. It was found that both grades of rice husk ash provide inferior mechanical properties (tensile strength, modulus, hardness, abrasion resistance, and tear strength) in comparison with reinforcing fillers such as silica and carbon black. However, the mechanical properties of the vulcanizates filled with rice husk ash are comparable to those filled with inert fillers. The addition of silane‐coupling agent has little effect on the properties of the ash‐filled vulcanizates. This is simply due to the lack of silanol groups on the ash surface. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2485–2493, 2002     

A comparative study of aging characteristics and thermal stability of oil palm ash,silica, and carbon black filled natural rubber vulcanizates

Filler‐filled natural rubber (NR) vulcanizates were prepared by conventional laboratory‐sized two roll mills and cured using sulfuric system. The effect of thermal aging on physical properties and thermogravimetric analysis (TGA) of oil palm ash (OPA) and commercial fillers (i.e., silica vulkasil C and carbon black N330)‐filled NR vulcanizates at respective optimum loading and equal loading were studied. Before aging, the OPA‐filled vulcanizates showed comparable optimum strength as carbon black‐filled vulcanizates. The hardening of aged filler‐filled NR vulcanizates happened after aging, thereby tensile strength and elongation at break reduced while the modulus increased. Fifty phr carbon black‐filled vulcanizates showed better retention in tensile properties as compared to silica (10 phr) and OPA (1 phr). This was attributed to the addition of different filler loading and this finding was further explained when equal loading of filler‐filled vulcanizates was studied. Fourier transform infra‐red analysis showed chemical structure had changed and tensile fractured surface exhibited smooth appearance due to the deterioration in tensile properties after aging. TGA also denoted the thermal stability was depending on the amount of filler loading. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4474–4481, 2013     

莫来石与沉淀法白炭黑填充丁苯橡胶复合材料的性能比较

在双辊开炼机中将未处理或用质量分数为3%的硅烷偶联剂A-189处理的莫来石粉体加入到丁苯橡胶(SBR)中制成复合材料.研究莫来石的加入量对SBR性能的影响,并与沉淀法白炭黑填充的SBR的性能进行了比较.结果表明,莫来石粉体对SBR表现出半增强特性;与沉淀法白炭黑填充的SBR相比,SBR/莫来石复合材料表现出良好的硫化特...     

Effect of fillers on thermal and mechanical properties of polyurethane elastomer

The effects of five different types of fillers on the thermal and mechanical properties of hydroxyl-terminated polybutadiene-based polyurethane elastomers were explored to develop a filled polyurethane elastomeric liner for rocket motors with hydroxyl-terminated polybutadiene-based composite propellants. Two type of carbon black, silica, aluminum oxide, and zirconium(III) oxide were used as filler. Based on the improvement in the tensile properties and the erosion resistance achieved in the first part of the study, an ISAF-type carbon black was selected to be used as the main filler in combination with an additional filler. The second part involves the investigation of polyurethane elastomers containing a second filler in various amounts in addition to the ISAF-type carbon black used as the main filler. In addition to the thermal and mechanical properties, the processability of the uncured polyurethane mixtures were also explored by measuring the viscosity in this second part of the study. The studied fillers do not considerbly change the thermal degradation temperatures and the thermal conductivity of the polyurethane elastomers with a filler content up to 16 wt %. The best improvement in the erosion resistance and tensile strength of the polyurethane elastomers with additional fillers is also achieved when filled with the ISAF-type carbon black, whereas the use of zirconium(III) oxide as additional filler provides almost no improvement in these properties. Viscosity of the uncured polyurethane mixtures increases with the increasing filler content and with the decreasing particle size of the filler. Aluminum oxide-filled elastomers seem to be the most suitable compositions having sufficiently high thermal and mechanical properties, together with the processability of uncured mixtures. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1057–1065, 1998     

Guayule natural rubber composites: impact of fillers on their cure characteristics,dynamic and mechanical behavior

Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.

     

Cardanol grafted natural rubber: A green substitute to natural rubber for enhancing silica filler dispersion

Natural rubber (NR) usage is wide‐spread from pencil erasers to aero tyres. Carbon black and silica are the most common reinforcing fillers in the rubber industries. Carbon black enhances the mechanical properties, while silica reduces the rolling resistance and enhances the wet grip characteristics. However, the dispersion of polar silica fillers in the nonpolar hydrocarbon rubbers like natural rubber is a serious issue to be resolved. In recent years, cardanol, an agricultural by‐product of the cashew industry is already established as a multifunctional additive in the rubber. The present study focuses on dispersion of silica filler in natural rubber grafted with cardanol (CGNR) and determination of its technical properties. The optimum cure time reduces and the cure rate increases for the CGNR vulcanizates as compared to that of the NR vulcanizates at all loadings of silica varying from 30 to 60 phr. The interaction between the phenolic moiety of cardanol and the siloxane as well as silanol functional groups present on the silica surface enhances the rubber–filler interaction which leads to better reinforcement. The crosslink density and bound rubber content are found to be higher for the silica reinforced CGNR vulcanizates. The physico‐mechanical properties of the silica reinforced CGNR vulcanizates are superior to those of the NR vulcanizates. The CGNR vulcanizates show lower compression set and lower abrasion loss. The dynamic‐mechanical properties exhibit less Payne effect for silica reinforced CGNR vulcanizates as compared to the NR vulcanizates. The transmission electron photomicrographs show uniform dispersion of silica filler in the CGNR matrix. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43057.     

三种微生物脱硫废乳胶及其填充天然橡胶的力学性能比较

利用三种微生物鞘氨醇单胞菌、脂环酸芽孢杆菌和酵母菌对废乳胶(WLR)进行了脱硫再生,考察了脱硫过程中微生物的生长情况以及脱硫前后WLR溶胀和交联密度的变化,并将WLR和脱硫WLR(DWLR)以不同份数填充到天然橡胶(NR)中,对比了DWLR/NR硫化胶和WLR/NR硫化胶的力学性能和交联密度。结果表明,利用鞘氨醇单胞菌脱硫的WLR溶胀值较高,交联密度较低。随着乳胶用量的增加,填充NR硫化胶的拉伸强度和交联密度逐渐降低,扯断生长率逐渐增加。DWLR/NR硫化胶的力学性能明显优于WLR/NR硫化胶,且鞘氨醇单胞菌脱硫的DWLR/NR的力学性能明显优于其它两种微生物脱硫的DWLR/NR硫化胶。     

Reinforcement of ethylene‐acrylic elastomer with a dispersion of grafted PA6 droplets

Cured elastomers are commonly dispersed in thermoplastics, but the reverse morphology has received little attention. The present work examines dispersions of 0.5–2 μm PA6 droplets in ethylene‐acrylic elastomer (AEM), created by melt blending. After cooling, the blends are compounded with amine curative and crosslinked. Uncrosslinked blends exhibit high bound rubber levels compared to N990 carbon black filled AEM, but similar viscosity at equal filler volume fraction. Crosslinking the blends produces strong, heat resistant vulcanizates with minimal Payne effect and good compression set resistance. These properties result from extensive AEM‐PA6 grafting, absence of filler‐filler contacts, and beneficial modification of the oxidation profile under diffusion limited conditions. The data show rubber‐filler grafting strongly influences filler reinforcing ability, but does not directly influence the Payne effect. Relative to unfilled AEM, silica and carbon black fillers accelerate oxidative degradation in proportion to their reinforcing ability, whereas PA6 has a stabilizing effect. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43995.     

On the potential of organoclay with respect to conventional fillers (carbon black,silica) for epoxidized natural rubber compatibilized natural rubber vulcanizates

Onium modified montmorillonite (organoclay) was compounded with natural rubber (NR) in an internal mixer and cured by using a conventional sulfuric system. Epoxidized natural rubber with 50 mol % epoxidation (ENR 50) in 10 parts per hundred rubber (phr) was used as a compatibilizer in this study. For comparison purposes, two commercial fillers: carbon black (grade N330) and silica (grade vulcasil‐S) were used. Cure characteristics were carried out on a Monsanto MDR2000 Rheometer. Organoclay filled vulcanizate showed the lowest values of torque maximum, torque minimum, scorch, and cure times. The kinetics of cure reaction showed organoclay could behave as a cocuring agent. The mechanical testing of the vulcanizates involved the determination of tensile and tear properties. The improvement of tensile strength, elongation at break, and tear properties in organoclay filled vulcanizate were significantly higher compared to silica and carbon black filled vulcanizates. In terms of reinforcing efficiency (RE), organoclay exhibited the highest stiffness followed by silica and carbon black filled vulcanizates. Scanning electron microscopy revealed that incorporation of various types of fillers has transformed the failure mechanism of the resulting NR vulcanizates compared to the gum vulcanizates. Dynamic mechanical thermal analysis (DMTA) revealed that the stiffness and molecular relaxation of NR vulcanizates are strongly affected by the filler–rubber interactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2438–2445, 2004     

Fly‐ash particles and precipitated silica as fillers in rubbers. II. Effects of silica content and Si69‐treatment in natural rubber/styrene–butadiene rubber vulcanizates

This article explored the possibility of using silica from fly‐ash particles as reinforcement in natural rubber/styrene–butadiene rubber (NR/SBR) vulcanizates. For a given silica content, the NR : SBR blend ratio of 1 : 1 (or 50 : 50 phr) exhibited the optimum mechanical properties for fly‐ash filled NR/SBR blend system. When using untreated silica from fly‐ash, the cure time and mechanical properties of the NR/SBR vulcanizates decreased with increasing silica content. The improvement of the mechanical properties was achieved by addition of Si69, the recommended dosage being 2.0 wt % of silica content. The optimum tensile strength of the silica filled NR/SBR vulcanizates was peaked at 10–20 phr silica contents. Most mechanical properties increased with thermal ageing. The addition of silica from fly‐ash in the NR/SBR vulcanizates was found to improve the elastic behavior, including compression set and resilience, as compared with that of commercial precipitated silica. Taking mechanical properties into account, the recommended dosage for the silica (FASi) content was 20 phr. For more effective reinforcement, the silica from fly‐ash particles had to be chemically treated with 2.0 wt % Si69. It was convincing that silica from fly‐ash particles could be used to replace commercial silica as reinforcement in NR/SBR vulcanizates for cost‐saving and environment benefits. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Structure–property relationships of silica/silane formulations in natural rubber,isoprene rubber and styrene–butadiene rubber composites

The mechanical performance of natural rubber (NR), synthetic poly-isoprene rubber (IR), and styrene–butadiene rubber (SBR) composites filled with various silica/silane systems is investigated. The results are analyzed by referring to micro-mechanical material parameters, which quantify the morphological and structural properties of the polymer and filler network. These are obtained from fits with the dynamic flocculation model (DFM) describing the strongly nonlinear quasi-static stress–strain response of filler-reinforced elastomers as found from multihysteresis measurements of the investigated compounds. We focus on the reinforcement mechanisms of silica compounds with coupling and covering silane, respectively. The fitted material parameters give hints that the coupling silane provides a strong chemical polymer–filler coupling, which is accompanied by improved strength of filler–filler bonds for all three rubbers types. This may result also from the chemical coupling of short chains bridging adjacent silica particles. It implies larger stress values for the coupling silane and, in the case of NR and IR, a more pronounced “Payne effect” compared to the covering silane. In contrast, for SBR, the coupling silane delivers a lower Payne effect, which is explained by differences in the compatibility between rubber type and silane-grafted silica surface. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48435.     

Fly ash particles and precipitated silica as fillers in rubbers. I. Untreated fillers in natural rubber and styrene–butadiene rubber compounds

In this study, we investigated the effects of untreated precipitated silica (PSi) and fly ash silica (FASi) as fillers on the properties of natural rubber (NR) and styrene–butadiene rubber (SBR) compounds. The cure characteristics and the final properties of the NR and SBR compounds were considered separately and comparatively with regard to the effect of the loading of the fillers, which ranged from 0 to 80 phr. In the NR system, the cure time and minimum and maximum torques of the NR compounds progressively increased at PSi loadings of 30–75 phr. A relatively low cure time and low viscosity of the NR compounds were achieved throughout the FASi loadings used. The vulcanizate properties of the FASi‐filled vulcanizates appeared to be very similar to those of the PSi‐filled vulcanizates at silica contents of 0–30 phr. Above these concentrations, the properties of the PSi‐filled vulcanizates improved, whereas those of the FASi‐filled compounds remained the same. In the SBR system, the changing trends of all of the properties of the filled SBR vulcanizates were very similar to those of the filled NR vulcanizates, except for the tensile and tear strengths. For a given rubber matrix and silica content, the discrepancies in the results between PSi and FASi were associated with filler–filler interactions, filler particle size, and the amount of nonrubber in the vulcanizates. With the effect of the FASi particles on the mechanical properties of the NR and SBR vulcanizates considered, we recommend fly ash particles as a filler in NR at silica concentrations of 0–30 phr but not in SBR systems, except when improvement in the tensile and tear properties is required. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2119–2130, 2004     

端羟基液体橡胶聚氨酯弹性体与金属粘接的研究

端羟基液体橡胶聚氨酯弹性体为柔性材料,丁羟聚氨酯弹性体硬度比丁腈羟聚氨酯弹性体小,前者的拉伸强度比后者稍大．伸长率也大;其作为粘合剂与金属粘接时,金属表面在分别经过酸化、磷化,喷砂、清洗,喷砂、清洗、涂偶联剂（KH-550）3种方法处理,其中金属表面进行喷砂、清洗、涂覆偶联剂时粘接性能最好。     

Curing characteristics,mechanical properties and morphology of butyl rubber filled with ground tire rubber (GTR)

The results on testing application of ground tire rubber (GTR), as potential filler for butyl rubber, are presented. The GTR content variation, within the range of 10–90 phr, was studied with respect to the vulcanization process, static mechanical properties (tensile strength, elongation-at-break, hardness and resilience), dynamic mechanical properties and the morphology of the obtained vulcanizates. Butyl rubber was characterized by its low compatibility to other elastomers [i.e., natural rubber and styrene–butadiene rubber (SBR)—the main ingredients of tires] and low degree of unsaturation. To evaluate the impact of these factors on curing characteristics and mechanical properties of butyl rubber vulcanizates filled with GTR, the same compositions of SBR compounds, cured under identical conditions, were used as reference samples. Based on the obtained data, it can be stated that butyl rubber vulcanizates containing 30 phr of GTR as filler revealed the highest tensile strength and elongation-at-break. The microstructural analysis of a sample containing 30 phr of GTR revealed strong interactions between the butyl rubber matrix and GTR. This phenomenon resulted mainly from two factors. First, the cross-link density of the butyl rubber matrix was affected by its competition against GTR for cross-linking agents. Secondly, the migration of carbon black particles from GTR into the butyl rubber matrix had a significant impact on properties of the obtained vulcanizates.     

Norbornylized soybean oil as a sustainable new plasticizer for rubbers with hybrid fillers

Carbon black (CB) and precipitated silica are two major reinforcing fillers in rubbers. CB/silica hybrid filler is also widely used in rubbers to provide balanced properties. CB/silica‐hybrid‐filler‐filled styrene‐butadiene rubber (SBR) containing naphthenic oil (NO), soybean oil (SO) and norbornylized SO (NSO) was investigated. The swelling and curing behavior and rheological, mechanical, thermal, aging and dynamic properties were studied and compared with earlier reported data on CB‐ or silica‐filled SBR. NSO provides better scorch safety and faster cure than SO. Compared with NO, the addition of SO and NSO enhances the thermal stability and aging resistance of SBR vulcanizates. SBR/NSO vulcanizates with hybrid filler exhibit a higher tensile and tear strength than SBR/NO and SBR/SO vulcanizates. A synergistic effect in the abrasion resistance of vulcanizates containing the hybrid filler is observed. An increase of sulfur content in the hybrid‐filler‐filled SBR/NSO vulcanizates provides further improvement in abrasion resistance, wet traction and rolling resistance. © 2017 Society of Chemical Industry     

Exploring a highly dispersible silica–elastomer composite for tire applications

In this article, we provide an extensive analyses of various properties that are required for tire tread based on developed highly dispersible (HD) silica‐filled epoxidized natural rubber composites. Silica in an HD form has become a staple filler in tire tread applications because of its inherent advantages. In this study, epoxidized natural rubber with 25 mol % epoxide (ENR 25) and natural rubber were mixed with two different types of HD silica for superior reinforcement. A standard tire tread formulation was used as the base compound. The magic triangle properties were conspicuously influenced by the viscoelastic characteristics of the vulcanizates. The introduction of polar rubber (ENR 25) into the HD silica greatly improved rheological, physicomechanical, bound rubber content, and dynamic mechanical properties, and this led to a better, fuel‐efficient tire. We successfully achieved this, even in the absence of a silane coupling agent. ENR 25 played an imperative role in showing an extraordinary rubber–filler interactions and was primarily responsible for these observations. In this study, we explored the HD silica dispersion with transmission electron microscopy observations. Morphological studies revealed well‐dispersed HD silica with the formation of a rubber–filler network. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43531.     

Effect of mica addition on the properties of natural rubber and polybutadiene rubber vulcanizates

The rheometric, mechanical, and dynamic mechanical properties as well as fracture surfaces of natural rubber–mica and polybutadiene rubber–mica vulcanizates were studied. Mica was used in the range of 0–30 phr and the rheometric study was carried out at 160°C. The results indicate that the mechanical properties are improved as filler addition increases. Dynamic mechanical testing was used to analyze the observed mechanical behavior. The two elastomers showed different fracture behaviors. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2156–2162, 2003     

Effect of silica reinforcement on natural rubber and butadiene rubber vulcanizates by a sol–gel reaction with tetraethoxysilane

The effect of silica reinforcement was studied for natural rubber (NR) and butadiene rubber (BR) vulcanizates by a sol–gel reaction with tetraethoxysilane at different temperatures. The formation of silica in the rubber vulcanizates was investigated analytically with Fourier transform infrared spectroscopy and energy-dispersive X-ray analysis. The variations of the mechanical and dynamic properties were measured in the NR and BR vulcanizates with silica filling. The hardness of the rubber vulcanizates increased with silica filling in the rubber matrix. The tensile strength and elongation at break decreased with silica filling in the NR vulcanizates. The moduli at 50, 100, and 300% elongation increased with silica filling in the rubber matrix. The storage modulus of silica-filled rubber vulcanizates became higher than that of pure rubber vulcanizates. The temperature dependence of the loss modulus also increased with silica filling. The temperature dependence of the loss tangent was maintained, regardless of silica filling in the BR vulcanizates. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Cure characteristics and physical properties of ground‐rubber‐filled natural rubber vulcanizates: Effects of the curing systems of the ground rubber and rubber matrix

Recycling discarded rubber is important for both environmental and economic reasons. One of the most attractive methods of recycling rubber waste is to use ground rubber (GR) as a compounding ingredient or as a replacement for raw polymers. In this study, ground natural rubber was prepared with different curing systems and compounded into the parent compounds. The cure behaviors and physical properties of the GR‐filled vulcanizates were investigated, and they were largely affected by the curing systems of the rubber matrix and GR. GR‐filled vulcanizates with GR and the rubber matrix, having a conventional curing system, showed the largest changes in the cure characteristics. The greatest decrease in the physical properties was observed for peroxide‐cured‐GR‐filled vulcanizates. The addition of GR decreased the crosslink density of the GR‐filled vulcanizates. This was thought to be the main reason for the reduction of the mechanical properties of the GR‐filled vulcanizates. However, the adhesion between the GR and rubber matrix may also have caused the differences in the physical properties of the GR‐filled vulcanizates with respect to the curing systems of the rubber matrix and GR. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

多硫杂脂肪族二酸双(2,2-二羟甲基-1,3-丙二醇)单酯的制备及其在橡胶中的应用

合成了以3,4,5,6-四硫杂辛二酸双(2,2-二羟甲基-1,3-丙二醇)单酯为代表的多羟基多硫化物偶联剂。考察了不同用量偶联剂与无机填料(白炭黑、陶土、轻质碳酸钙)的配合对胶料的共补强效果。结果表明,加入适量偶联剂,明显促进橡胶与填料间的结合,改善硫化胶的力学性能;在该偶联剂体系中,硫含量较高的偶联剂作用更为显著,其对白炭黑和陶土填充胶料的作用明显高于轻质碳酸钙填充胶料。