Characterization of waterborne polyurethane/clay nanocomposite adhesives containing different amounts of ionic groups

A series of waterborne polyurethane (WBPU)/clay nanocomposite dispersions containing different amounts of 2,2-dimethylol propionic acid (DMPA) and clay were prepared. It was found that the properties of WBPU/clay nanocomposites were highly dependent on both clay content and DMPA content. The WBPU/clay nanocomposite dispersion with a higher clay content showed a larger mean particle size and a less negative zeta potential. The optimum clay content, which increased with increasing DMPA content, showed maximum tensile strength, Young's modulus and adhesive strength of WBPU/clay nanocomposite. The optimum clay concentrations for WBPU/clay nanocomposite samples containing 3.75, 5.41 and 6.17 wt% DMPA were about 0.5, 1.0 and 2.0 wt%, respectively.     

Properties of Waterborne Polyurethane/CNT Nanocomposite Adhesives: Effect of Countercations

Two series of waterborne polyurethane (WBPU)/carbon nanotube (CNT) nanocomposites were prepared with various CNT contents (0–1.50 wt%). We used a metal-hydroxide (copper hydroxide, Cu(OH)₂) and amine (triethylamine, TEA) as the countercation in the nanocomposites. The interaction of the countercations with the CNTs in the nanocomposite was characterized by TEM, and the interaction effects on the properties, such as the glass transition temperature (T_g), storage modulus, tensile strength, Young's modulus and adhesive strength, were investigated. The CNTs were homogeneously (optimum) dispersed at concentrations of up to 1.25 and 1.00 wt% for the metal-hydroxide and amine series, respectively. At the optimum CNT content, the tensile strength and adhesive strength were maximized in each series. However, the adhesive strength of the WBPU/CNT nanocomposite with the metal-hydroxide countercation was less affected than with the amine-countercation after immersing the adhesive bonded nylon fabrics in water (for up to 48 h).     

Synthesis and characterization of waterborne polyurethane adhesives containing different amount of ionic groups (I)

A series of waterborne polyurethanes (WBPU) containing different amount of 2,2‐bis(hydroxymethyl) propionic acid (DMPA) were synthesized using prepolymer mixing process. Relationships between the DMPA content and physical, mechanical, and thermal properties as well as adhesive behavior at different condition were investigated. Stable aqueous dispersions of WBPU were obtained when the DMPA content was more than 10 mol %. At higher DMPA content, the particle size of the WBPU dispersion was lower but the viscosity of the dispersion was higher. Water swelling and tensile strength of the films increased with increasing of DMPA content. The optimum adhesive strength of WBPU adhesives was found to be depended on the DMPA content, pressing temperature, and pressure on adhesion process. The adhesive strength of WBPU adhesives increased with increasing DMPA content. The optimum pressing temperature decreased with increasing DMPA content. The adhesive strength of WBPU adhesives increased with increasing pressure up to 15 kg f/cm² and then leveled off. The optimum pressing temperature of WBPU adhesives samples containing 24.02, 22.05, and 17.05 mol % DMPA was about 100, 120, and 140°C, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5684–5691, 2006     

Properties of Waterborne Polyurethane/Clay Nanocomposite Adhesives

A series of waterborne polyurethane (WBPU)/clay nanocomposite dispersions using two different organically modified clays, namely Cloisite 15A and Cloisite 30B, were prepared. It was found that the properties of WBPU/clay nanocomposites were highly dependent on both the clay content and the clay surface characteristic (hydrophilic/hydrophobic). A WBPU/clay nanocomposite dispersion with a higher clay content showed a less negative zeta potential. A lower zeta potential for dispersion with Cloisite 30B compared to Cloisite 15A was observed indicating a higher stability of the dispersion. The tensile strength, Young's modulus and adhesive strength of WBPU/clay nanocomposite containing Cloisite 30B were also higher than those of nanocomposite containing Cloisite 15A. The optimum clay contents, with respect to these properties, for nanocomposites with Cloisite 15A and Cloisite 30B were found to be 2 wt% and 3 wt%, respectively.     

Preparation and characterization of waterborne polyurethane/clay nanocomposite: Effect on water vapor permeability

A series of waterborne polyurethane (WBPU)/clay nanocomposite coating materials were prepared by prepolymer process with different clay contents (0–2 wt %). The study investigated surface structure as well as water resistance, thermal, mechanical, and water vapor permeability (WVP) of composite materials as a function of clay contents. The glass transition temperature of composite materials was higher than pristine WBPU and also increased with increasing clay contents. Thermal stability, and water resistance of the nanocomposite films also increased, when compared with pristine WBPU, and these properties increased with an increase in clay content. The maximum tensile strength was found with optimum clay content (1 wt %) of composite films. The WVP of coated nylon fabrics depend on the clay content and temperatures. The rate (%) of WVP of coated nylon fabrics decreased with increasing clay content at a fixed temperature. However, at a fixed clay content the WVP increased with the increase of temperatures. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface graft polymerization of conducting polyaniline on waterborne poyurethane‐urea film and its phenol sensing

Waterborne polyurethane‐ureas (pristine WBPUs: WBPU‐19 and WBPU‐24, fixed soft segment content: 60 wt %) containing dimethylol propionic acid (DMPA)/ethylene diamine (EDA) contents (19/16.8 and 24/11.4 mol %) were prepared. The polyaniline (PANI)‐graft‐WBPU (PANI‐graft‐WBPU) films were prepared by oxidative graft polymerization of aniline on the surface layer of WBPU films. This study focused on the effects of reaction conditions (concentrations/treating times/temperatures of aniline and APS) and DMPA content on the %grafting, conductivity, and mechanical properties of PANI‐graft‐WBPU films. To obtain the maximum %grafting (PANI‐graft‐WBPU‐19: 6.2, and PANI‐graft‐WBPU‐24: 7.4) and conductivity (PANI‐graft‐WBPU‐19: 3.6 × 10^?2S/cm, and PANI‐graft‐WBPU‐24: 4.7 × 10^?2S/cm), the optimum concentrations/treating times/temperatures of aniline and APS, were found to be 0.35M/10 min/25°C and 0.2M/10 min/0°C, respectively. The tensile strength of film samples was found to be increased in the order of PANI‐graft‐WBPU‐19>pristine WBPU‐19>PANI‐graft‐WBPU‐24>pristine WBPU‐24. The PANI‐graft‐WBPU‐19 (%grafting: 6.2) films on exposure to 0–10,000 ppm phenol solutions showed a well‐defined response behavior, demonstrating high promise for application in aqueous phenol sensors. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and mechanical properties of waterborne polyurethane/carbon nanotube composites

Waterborne polyurethane (WBPU) and multiwalled carbon nanotubes (CNTs) composite films with 0–4.0 wt% CNTs were prepared by ultrasonic dispersion of carboxylic acid‐functionalized CNTs in WBPU followed by emulsion casting process. The elongations at break of the WBPU/CNTs composites increase with the incorporation of CNTs. The tensile strength and crystallinity of the nanocomposite films with lower CNTs contents (<2 wt%) increase obviously; while the tensile strengths of the composites with more CNTs (≥2 wt%) decrease, in contrast to the pure PU film. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations indicated that the CNTs are uniformly dispersed in the composites incorporated with lower CNTs contents (≤1.5 wt%). However, aggregation of CNTs increased with increasing CNTs content in the WBPU/CNTs composites, causing the macrophase separation. The dispersion state of the CNTs affects the crystallinity of the PU matrix and the phase separation of the composites, which are two key factors to influence the mechanical properties of the WBPU/CNTs composites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

复合薄膜用水性聚氨酯胶粘剂的研究

以聚已二酸1,4-丁二醇酯(PBA)、甲苯二异氰酸酯(TDI)、二羟甲基丙酸(DMPA)等为主要原料合成了水性聚氨酯复膜胶,讨论了亲水性扩链剂DMPA用量对水性聚氨酯复膜胶的稳定性、耐水性、粘接强度等的影响;使用差示扫描量热仪(DSC)和原子力显微镜(AFM)观察了分子结构中的软、硬段微相结构分布。结果表明,当DMPA质量分数占预聚体总质量的2.67%～5.34%时能够制得稳定乳液;水性复膜胶乳液的粘度以及胶膜的吸水率随着亲水性扩链剂DMPA用量的增加而增加,而乳液的粒径随着亲水性扩链剂DMPA用量的增加而减小;硬段含量的增加会降低软段结晶,增加水性聚氨酯复膜胶高分子链的极性和粘接强度,当硬段质量分数为22.79%时,胶膜具有较好的T型剥离强度;提高复合压力能够显著提高T型剥离强度;该复膜胶对聚对苯二甲酸乙二醇酯(PET)膜有着比聚丙烯(OPP)膜更好的粘接效果。     

Properties of Waterborne Polyurethane Adhesives: Effect of Chain Extender and Polyol Content

A series of waterborne polyurethane (WBPU) adhesives were prepared with various ratios of polyol, poly(tetramethylene oxide glycol) (PTMG), and chain extender, ethylene diamine (EDA), at a fixed content of diisocyanate, 4,4-dicyclohexylmethane diisocyanate (H₁₂MDI) and hydrophilic agent, 2,2-dimethylol propionic acid (DMPA). WBPU adhesives were characterized by IR and ¹H-NMR spectroscopies, X-ray diffraction (XRD) and gel permeation chromatography (GPC). It was found that the extent of hydrogen bonds between hard–hard segment (i.e., hydrogen bonds between the NH and carbonyl groups) increased with increasing chain extender content (decreasing polyol content). Moreover, the disordered hydrogen bond of carbonyl group (hydrogen bond of urethane groups in the interfacial region) increased with increasing chain extender content (decreasing polyol content). The cyclic urea and allophanate group, which are attributed to the side reaction and cross-linking reaction, respectively, were found above a molar ratio 0.17 of chain extender to diisocyanate. The adhesive strength was maximum with 0.95 wt% and 63.10 wt% chain extender and soft segment (PTMG), respectively (H2 sample) at room temperature for the WBPU adhesive. However, with increasing application temperature the adhesive strength decreased for all samples.     

Properties of Waterborne Polyurethane Adhesives with Aliphatic and Aromatic Diisocyanates

A series of waterborne polyurethane (WBPU) adhesives were prepared with various ratios of aliphatic/aromatic diisocyanates, namely 4,4′-dicyclohexylmethane diisocyanate (H₁₂MDI) as an aliphatic diisocyanate and 4,4′-diphenylmethane diisocyanate (MDI) as an aromatic diisocyanate with poly(tetramethyleneoxideglycol) (PTMG), ethylene diamine (EDA) and dimethylol propionic acid (DMPA). ¹H-NMR spectroscopy was utilized to investigate the side reaction at the dispersion step during synthesis of WBPU dispersions with respect to aliphatic, aromatic and mixed diisocyanates. The tensile strength, Young's modulus, elongation at break (%), storage modulus, glass transition temperature and adhesive strength were measured with respect to aliphatic/aromatic diisocyanate contents. The adhesive strength was maximum using mixed diisocyanates containing 25 mol% MDI in WBPU adhesives.     

Properties of Waterborne Polyurethane/Clay Nanocomposite Adhesives with Various Countercations of Carboxyl Acid Salt Group

Four series of waterborne polyurethane (WBPU)/clay nanocomposite adhesives were prepared using three different countercations, namely triethylamine (TEA), lithium hydroxide (LiOH) and copper hydroxide (Cu(OH)₂ ) as well as one mixed countercation of TEA and Cu(OH)₂ (1:0.5). The interaction of carboxyl acid salt group using different countercations with clay platelet was characterized by SEM and TEM, and the interaction effects on properties such as water swelling (%), thermal stability, tensile strength, glass transition temperature ( T _g ), and adhesive strength were investigated. The tensile strength, water resistance and adhesive strength increased with increasing clay content up to an optimal value at which point the maximum tensile strength, water resistance and adhesive strength were recorded for each series. However, the optimal clay contents were 1.00 and 0.50 wt% for TEA/LiOH mixed countercation series and (Cu(OH)₂ ) series, respectively. Among all of the samples the maximum tensile strength, water resistance and adhesive strength were found using mixed countercation (TEA and Cu(OH)₂ = 1:0.5) with 1 wt% clay content.     

Effect of polyisocyanate hardener on adhesive force of waterborne polyurethane adhesives

A series of waterborne polyurethane (WBPU)/hardener adhesives were obtained from mixing of WBPU containing different types of polyol as a soft segment with aliphatic and aromatic polyisocyanates hardeners. By characterization of allophanate and biuret bonds formed from the reaction of hardener NCO with urethane/urea groups of WBPU using ¹HNMR spectroscopy. It was found that the optimum number ratio (molar ratio) of NCO group of hardener to urethane/urea group of WBPU that shows the highest adhesion force was depended on the type of hardener (aliphatic/aromatic polyisocyanate) and dimethylol propionic acid (DMPA) content (total content of urethane/urea groups); however independent of the type of soft segment (polyol) of WBPU. The optimum number ratio (molar ratio) of NCO group of aromatic polyisocyanate hardener to urethane/urea was higher than that of aliphatic hardener to achieve the highest adhesion force of WBPU. The adhesive force increased with increasing hardener content up to the optimum point and then decreased. Poly(tetramethylene adipate glycol) (PTAd) based WBPUs with aliphatic hardener show higher adhesive force than Poly(tetramethylene oxide glycol) (PTMG) and aliphatic hardener‐based WBPUs at the optimum number ratio (molar ratio) of NCO group of hardener to urethane/urea group of WBPU. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3663–3669, 2007     

Properties of waterborne polyurethane‐fluorinated marine coatings: The effect of different types of diisocyanates and tetrafluorobutanediol chain extender content

Three series of waterborne polyurethane‐ (WBPU) fluorinated coatings were prepared with single aliphatic (4,4′‐dicyclohexylmethane diisocyanate, H₁₂MDI), aromatic (4,4′‐diphenylmethane, MDI) and a mixture of aliphatic and aromatic diisocyanates (1 : 1). Different contents of 2,2,3,3‐tetrafluoro1,4‐butanediol (TFBD) as a chain extender were used in the WBPU coatings. The fluoro‐enriched surface of the WBPU coatings was obtained with a combination of a high TFBD content (8.77 mol %) as well as the aliphatic or mixed diisocyanates. The tensile strength, Young's modulus, elongation at break (%) and adhesive strength were characterized with respect to the TFBD contents. The mechanical strength and adhesive strength increased with increasing TFBD content in the three series. In artificial salt water, the maximum adhesive strength of WBPU was observed for this coating, which was achieved by TFBD bonded H₁₂MDI of mixed diisocyanates with a higher TFBD content (8.77 mol %). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39905.     

Synthesis and characterization of multiwall carbon nanotube/waterborne polyurethane nanocomposites

The preparation of thermoplastic nanocomposites of waterborne polyurethane (WBPU) and multiwall carbon nanotubes (MWCNTs) via an in situ polymerization approach is presented. The effects of the presence and content of MWCNTs on the morphology and thermal, mechanical and electrical properties of the nanocomposites were investigated. Carbon nanotubes were modified with amide groups in order to enhance their chemical affinity towards WBPU. Thermogravimetric studies show enhanced thermal stability of the nanocomposites. Scanning and transmission electronic microscopy images prove that functionalized carbon nanotubes can be effectively dispersed in WBPU matrix. Mechanical properties reveal that Young's modulus and tensile strength tend to increase when appropriate amounts of MWCNTs are loaded due to the reinforcing effect of the functionalized carbon nanotubes. Thermal properties show an increase in the glass transition temperature and storage modulus with an increase in MWCNT content. X‐ray diffraction reveals better crystallization of the WBPU in the presence of MWCNTs. The WBPU/MWCNT nanocomposite film containing 1 wt% of MWCNTs exhibits a conductivity nearly five orders of magnitude higher than that of WBPU film. © 2017 Society of Chemical Industry     

Enhanced mechanical and anisotropic thermal conductive properties of polyimide nanocomposite films reinforced with hexagonal boron nitride nanosheets

To attain thermally conductive but electrically insulating polymer films, in this study, polyimide (PI) nanocomposite films with 1–30 wt% functionalized hexagonal boron nitride nanosheets (BNNSs) were fabricated via solution casting and following imidization. The microstructures, mechanical and thermal conductive properties of PI/BNNS nanocomposite films were examined by taking account of the relative content, anisotropic orientation, and interfacial interaction of BNNS and PI matrix. The scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffractometry data revealed that BNNSs with hydroxy and amino functional groups have specific molecular interactions with PI matrix and they form stacked aggregates in the nanocomposite films with high BNNS loadings of 10–30 wt%. The tensile mechanical strength/modulus, thermal degradation temperatures, and thermal conductivity of the nanocomposite films were found to be significantly enhanced with increasing the BNNS loadings. For the nanocomposite films with 1–30 wt% BNNS loadings, the in-plane thermal conductivity was measured to be 1.82–2.38 W/mK, which were much higher than the out-of-plane values of 0.35–1.14 W/mK. The significant anisotropic thermal conductivity of the nanocomposite films was found to be owing to the synergistic anisotropic orientation effects of both BNNS and PI matrix. It is noticeable that the in-plane and out-of-plane thermal conductivity values of the nanocomposite film with 30 wt% BNNS were ~1.31 and ~3.35 times higher than those of neat PI film, respectively.     

Effect of functionalized multiwalled carbon nanotubes on weather degradation and corrosion of waterborne polyurethane coatings

A series of waterborne polyurethane/functionalized multiwalled carbon nanotube (WBPU/f-MWCNT) nanocomposite dispersions was prepared using three defined concentrations of 0.5, 1.0 and 2.0 wt% carboxyl functionalized multiwalled carbon nanotubes (f-MWCNTs). All dispersions were coated on mild steel and exposed under natural weather condition for a maximum of 365 days. Both exposed and unexposed coatings were characterized by potentiodynamic polarization (PDP) and X-ray photoelectron spectroscopy (XPS) analyses. The pristine WBPU coating showed slight degradation and corrosion protection. Inclusion of a higher content of f-MWCNTs significantly improved both the degradation and corrosion protection efficiencies of the coatings. Maximal degradation and corrosion protection was observed when 2.0 wt% f-MWCNT was mixed with WBPU for all of the coatings.     

Preparation and properties of polydimethylsiloxane (PDMS)/polytetramethyleneadipate glycol (PTAd)-based waterborne polyurethane adhesives: Effect of PDMS molecular weight and content

Waterborne polyurethane (WBPU) dispersions were prepared by pre-polymer process using siloxane polyol, namely polydimethylsiloxane (PDMS), and polyester polyol, namely poly(tetramethyleneadipate glycol) (PTAd), as a soft segment. Three different molecular weights (M_n = 550, 6000, 110,000) of PDMS and one fixed molecular weight of PTAd (M_n = 2000) was used during preparation of WBPU dispersions. This research aims to explore the potential use of PDMS in complementing WBPU by boosting flexibility, water resistance, and adhesive strength. The water swelling (%), tensile strength, and adhesive strength of WBPUs were investigated with respect to PDMS molecular weight and PDMS content (PDMS mol %). The water swelling (%) and tensile strength decreased with increasing PDMS molecular weight at a fixed PDMS content (mol %) in mixed polyol of WBPU films. By contrast, the peel adhesive strength peaked at 6.64 mol % and 4.43 mol % with molecular weight of PDMS at 550 and 6000, respectively, while it only decreased when the molecular weight of PDMS stood at 110,000. The adhesive strength was almost unaffected with optimum content (6.64 mol %) of lower PDMS molecular weight (M_n = 550) in mixed polyol-based WBPU after immersing the adhesive bonded nylon fabrics in water for 48 h among all of the samples. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

UV-shielding by a polyurethane/f-Oil fly ash-CeO2 protective coating

A waste material called oil fly ash (OFA) was acid-functionalized, yielding f-OFA-COOH, which was then reacted with cerium oxide (CeO₂) to make CeO₂-functionalized OFA, or f-OFA-CeO₂. Pristine OFA and f-OFA-CeO₂ were used to make waterborne polyurethane (WBPU) dispersions, referred to as WBPU/OFA and WBPU/f-OFA-CeO₂, respectively, with defined OFA and f-OFA-CeO₂ content. All the dispersions were applied to mild steel as organic coatings to evaluate their protective properties, such as their hydrophobicity, adhesive strength and UV-shielding resistance. These protective properties varied based on the OFA and f-OFA-CeO₂ content. The highest water contact angle, minimum water swelling and maximum adhesive strength were found using WBPU/f-OFA-CeO₂-20 coating (using 2.00 wt% f-OFA-CeO₂), which also showed the maximum ultraviolet (UV) absorption via UV–vis spectroscopy analysis. This UV shielding result also matched field test results, as that coating was found to exhibit the lowest UV degradation near a marine atmosphere, as shown by X-ray photoelectron spectroscopy (XPS) analysis. The least affected hydrophobicity was also recorded for the sample with the WBPU/f-OFA-CeO₂-20 coating.     

Effects of injection molding conditions on the electrical properties of polycarbonate/carbon nanotube nanocomposites

Polycarbonate/Carbon nanotube (PC/CNT) nanocomposites containing various CNT contents (0–5 wt%) were prepared by injection molding. The effects of CNT contents, injection speed (V) and injection temperature (T) on the electrical resistivity of the PC/CNT nanocomposites were investigated. It was found that the tensile strength of nanocomposites was enhanced slightly with increased CNT contents, and the tensile modulus was 29% greater after the 5 wt% CNT addition, but the brittle tendency became stronger. Aside from tensile properties, the electrical resistivity of the nanocomposites dropped 12 orders of magnitude after the 5 wt% CNT addition. Also, there was a tendency that the electrical resistivity was lower in the case of higher injection temperature and lower injection speed. Scanning electron microscope (SEM) images and the distribution of surface layer electrical resistivity, clearly showed a notable influence by surface layer microstructures on the electrical resistivity, and the injection conditions affected both the value of the maximum electrical resistivity and the position where it occurred. This study offers an alternative green and simple molding process to prepare conductive PC nanocomposites and to achieve the industrialization of PC/CNT nanocomposite products which can be used in electromagnetic shielding and anti‐static fields. POLYM. COMPOS., 37:3245–3255, 2016. © 2015 Society of Plastics Engineers     

透明聚酯型水性聚氨酯的制备与性能研究

聚酯型WPU(水性聚氨酯)具有较高的力学强度和粘接强度,但是其较高的结晶性会导致胶膜透明性较差。以聚丙二醇(PPG)、聚己二酸丁二醇酯二醇(PBA)、异佛尔酮二异氰酸酯(IPDI)、2,2′-二羟甲基丙酸(DMPA)和1,4-丁二醇(BDO)等为原料,制备PPG改性聚酯型WPU。研究结果表明:PPG改性聚酯型WPU的黏度适中,储存稳定性良好;随着PPG含量的不断增加,WPU胶膜的透明性因结晶受阻程度增大而变好,相应胶粘剂的T型剥离强度和拉伸强度下降,而断裂伸长率升高;当w(PPG)=10%～20%时,相应WPU胶粘剂的透明性、T型剥离强度(≥1.97 N/mm)、拉伸强度(≥14.7 MPa)和断裂伸长率(≥421%)俱佳。