Phase transition and electrical properties of LiNbO<Subscript>3</Subscript>-modified K<Subscript>0.49</Subscript>Na<Subscript>0.51</Subscript>NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (1-x)K_0.49Na_0.51NbO₃-xLiNbO₃ (KNN-LN, x = 0 ~ 0.08) piezoelectric ceramics were prepared by the conventional solid-state sintering method. The effects of LiNbO₃ doping amount x on the phase transition behavior and the electrical properties of KNN-LN ceramics were investigated. By increasing LiNbO₃ doping amount x, the orthorhombic-tetragonal polymorphic phase transition (PPT) temperature (T _o–t) of KNN-LN ceramics shifted downwards, however, the Curie temperature (T _c) slightly moved upwards. The room temperature phase structure thus changed from orthorhombic to tetragonal across the compositions with 0.05 ≤ x ≤ 0.06, named as PPT region. The composition with x = 0.06 in the tetragonal side of PPT region exhibited optimized electrical properties of d ₃₃ = 246pC/N, k _p = 41.6%, ε _r = 679, tgδ = 0.028, and Q _m = 52. In addition to its very high T _c = 467 °C, this ceramic can be an excellent candidate for replacing the lead-based piezoceramics in high temperature applications.     

Dielectric and piezoelectric properties of YMnO<Subscript>3</Subscript> modified Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript> lead-free piezoelectric ceramics

Perovskite lead-free piezoelectric ceramics Bi_0.5Na_0.5TiO₃, modified with yttrium and manganese to form a new compound, (1 − x) Bi_0.5Na_0.5TiO₃–xYMnO₃ (BNT-YM100x) with x = 0–1.2 mol%, was synthesized by a conventional solid-state reaction method. The effect of YMnO₃ on crystal structure, dielectric and piezoelectric properties was investigated. X-ray diffraction analysis shows that the materials have a single phase perovskite structure with rhombohedral symmetry. Addition of small amount of YMnO₃ improves piezoelectric properties and the optimal piezoelectric properties of d ₃₃ = 115 pC/N, k _p = 0.207 and Q _m = 260 were obtained at 0.9% YMnO₃ addition. The loss tangent tanδ is approximately constant while Curie temperature decreases with increasing YMnO₃ concentration.     

Effect of ZnO on the microstructure and electrical properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoelectric ceramics

K_0.5Na_0.5NbO₃–x ZnO (KNN–xZn) lead-free ceramics have been prepared using the conventional sintering technique and the effects of ZnO addition on the phase structure and piezoelectric properties of the ceramics have been studied. Our results reveal that a small amount of ZnO can improve the density of the ceramics effectively. Because of the high density and ZnO doping effects, the piezoelectric and dielectric properties of the ceramics are improved considerably. The good piezoelectric and dielectric properties of d ₃₃ = 114 pC/N, k _p = 0.36, ε _r = 395, and Q _m = 68 were obtained for the KNN ceramics doped with 1 mol% ZnO. Therefore, the KNN-1.0 mol%Zn ceramics is a good candidate for lead-free piezoelectric application.     

Synthesis and sintering of nano-sized BaSnO<Subscript>3</Subscript> powders containing BaGeO<Subscript>3</Subscript>

The formation of solid solutions of the type [Ba(HOC₂H₄OH)₄][Sn_1−x Ge _x (OC₂H₄O)₃] as BaSn_1−x /Ge _x O₃ precursor and the phase evolution during its thermal decomposition are described in this paper. The 1,2-ethanediolato complexes can be decomposed to nano-sized BaSn_1−x /Ge _x O₃ preceramic powders. Samples with x = 0.05 consist of only a Ba(Sn,Ge)O₃ phase, whereas powders with x = 0.15 and 0.25 show diffraction patterns of both the Ba(Sn,Ge)O₃ and BaGeO₃ phase. The sintering behaviour was investigated on powders with a BaGeO₃ content of 5 and 15 mol%. These powders show a specific surface area of 15.4–15.9 m²/g and were obtained from calcination above 800 °C. The addition of BaGeO₃ reduced the sintering temperature of the ceramics drastically. BaSn_0.95Ge_0.05O₃ ceramics with a relative density of at least 90% can be obtained by sintering at 1150 °C for 1 h. The ceramic bodies reveal a fine microstructure with cubical-shaped grains between 0.25 and 0.6 μm. For dense ceramics, the sintering temperature could be reduced down to 1090 °C, when the soaking time was extended up to 10 h.     

Microstructure,phase transition and electrical properties of LiSbO<Subscript>3</Subscript>-doped (K<Subscript>0.49</Subscript>Na<Subscript>0.51</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoelectric ceramics

Microstructure, phase transition and electrical properties of (1 − x)K_0.49Na_0.51NbO₃ − xLiSbO₃ (x = 0–0.08) lead-free piezoceramics prepared by the conventional solid-state sintering method were investigated with an emphasis on the effects of LiSbO₃ doping amount x. SEM results showed that the ceramic became denser by increasing LiSbO₃ doping amount x. Being indexed by XRD profiles, the ceramics changed from an orthorhombic perovskite structure to a tetragonal one across a composition region of 0.04 ≤ x≤0.05. The sample of LiSbO₃ doping amount x = 0.05 in tetragonal side of the region had the maximum values of piezoelectric constant (d ₃₃ = 256 pC/N) and planar electromechanical coupling coefficient (k _p = 42.7%). Meanwhile, this ceramic sample showed other good properties such as ε _r = 1,463, tgδ = 0.036, Q _m = 48, P _r = 19.8 μC/cm², E _c = 1.9 kV/mm and T _c = 340 °C, which indicated it was a promising lead-free piezoelectric material for ultrasonic transducer applications.     

The effects of CuO-doping on dielectric and piezoelectric properties of Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–Ba(Zr,Ti)O<Subscript>3</Subscript> lead-free ceramics

CuO-doped lead-free ceramics based on bismuth sodium titanate (Bi_0.5Na_0.5TiO₃, BNT) and barium zirconate titanate (Ba(Zr_0.07Ti_0.93)O₃, BZT) were prepared via a multi-step solid-state reaction process. The BNT–BZT with CuO dopant ceramics sintered at 1150–1180 °C for 2 h in air showed a pure perovskite structure. SEM images reveal that a small amount of CuO (<2 mol%) play a significant role on the microstructure to improve its sintering attributes, while it will degrade when the dopant is added beyond 2 mol%. The dielectric and piezoelectric properties of CuO-doped BNT–BZT ceramics were evaluated. At room temperature, the sample doped with 2 mol% CuO shows quite good properties such as a high piezoelectric constant (d ₃₃ ∼156.5 pC/N) and a high electromechanical coupling factor (k _t ∼52%). The depolarization temperature increased dramatically and the maximum permittivity temperature decreased slightly.     

Phase component and conductivities of Co-doped BaTiO<Subscript>3</Subscript> thermistors

BaTi_1−x Co _x O_3−δ (0.01 ≤ x ≤ 0.4) ceramics were prepared by a wet chemical process polymerized with polyvinyl alcohol. The phases and related electrical properties of the ceramics were investigated. The phase component of the ceramics changes from a tetragonal phase to a hexagonal one with the Co concentration increase. A pure hexagonal phase formed in the ceramic with x = 0.2. The measurement of the temperature dependence of resistances revealed that the ceramic resistivities increase with temperature rising at the temperatures (T) lower than half of the related Debye temperature (Θ_D), and the ceramics show a negative temperature coefficient (NTC) effect at T > Θ_D/2. The material constants B _50/120 of the BaTi_1−x Co _x O_3−δ NTC thermistors were calculated to be 3,187, 2,968 and 2,648 K for x = 0.2, 0.3 and 0.4, respectively. Narrow-band conduction and non-adiabatic hopping models are proposed for the conduction mechanisms at T < Θ_D/2 and T > Θ_D/2, respectively.     

Investigation on Electrical and Magnetic Properties of Gd-doped BiFeO<Subscript>3</Subscript>

Multiferroic ceramic samples of Bi_1−x Gd _x FeO₃ (x=0, 0.05, 0.1 and 0.15) have been prepared by rapid liquid-phase sintering technique. The effect of Gd substitution on ferroelectric and magnetic properties of Bi_1−x Gd _x FeO₃ ceramics has been investigated. The results of X-ray diffraction (XRD) patterns show that the single-phase BiFeO₃ sample has a rhombohedral structure and Gd³⁺ substitution for Bi³⁺ has not affected its structure. Experimental results suggest that for Bi_1−x Gd _x FeO₃ system, the ferroelectric and magnetic properties of BiFeO₃ are improved by Gd doping and the loop area increases with the Gd content. When x=0.15, saturated ferroelectric hysteresis loop is observed at room temperature with the maximal 2Pr=1.62 μC/cm², which is about 578.6% higher than that of BiFeO₃.     

BiFeO<Subscript>3</Subscript>-modified (Li,K, Na)(Nb,Ta)O<Subscript>3</Subscript> lead-free piezoelectric ceramics with temperature-stable piezoelectric property and enhanced mechanical strength

BiFeO₃-modified lead-free piezoceramics Li_0.05(Na_0.515K_0.485)_0.95Nb_0.8Ta_0.2O₃ (LKNNT) were successfully fabricated by conventional method to investigate its influences on phase structure and electricity as well as mechanical properties. A tiny amount of BiFeO₃ (BF) changes the phase structure of LKNNT to tetragonal and further to pseudocubic, and also effectively improves the sintering ability and densification of LKNNT which enhances the mechanical property. The LKNNT piezoceramics with the addition of 1 mol% BF has the bulk density of 5.02 g/cm³ and an enhanced fracture strength of 142 MPa which is even higher than that of the sample of similar composition prepared by spark plasma sintering, also possesses room temperature electric properties of d ₃₃* ~ 225 pm/V, k _p ~ 36.3%, ε _r ~ 1140, tgδ ~ 0.018, T _c ~ 305 °C and Q _m ~ 80. The d ₃₃* remains constant up to 150 °C and the change ratio of dielectric property largely decreases over the temperature range of −50–150 °C, which can be attributed to the temperature-independent phase structure of LKNNT piezoceramics, making the ceramics as a promising candidate for actual applications.     

Construction of new morphotropic phase boundary in 0.94(K0.4?xNa0.6BaxNb1?xZrx)O3–0.06LiSbO3 lead-free piezoelectric ceramics

0.94(K_0.4−x Na_0.6Ba _x Nb_1−x Zr _x )O₃–0.06LiSbO₃ ceramics were prepared by conventional technique, and the effect of BaZrO₃ on the phase transitions, dielectric, ferroelectric, and piezoelectric properties of the ceramics were investigated. The phase transitions for the ceramics were determined by the temperature dependence of dielectric properties and X-ray diffraction patterns. BaZrO₃ changes the symmetry of the ceramics from tetragonal dominant phase with x = 0–0.06 to rhombohedral phase with x = 0.07–0.09. The phase transition near room temperature for the composition with x ~ 0.06 is different from previously reported phase transition between orthorhombic and tetragonal phases. It is suggested that a new morphotropic phase boundary (MPB) is constructed with both rhombohedral–orthorhombic and orthorhombic–tetragonal phase transitions near room temperature, and the enhanced piezoelectric properties (d ₃₃ = 344 pC/N and k _P = 32.4% with x = 0.06) are obtained. The results indicate that the construction of new MPB is of significance for further development of KNN-based ceramics.     

Influence of Sm substitution on the phase,microstructure and microwave dielectric properties of SrLa<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>17</Subscript>

New dielectric ceramics in the SrLa_4−xSm_xTi₅O₁₇ (0 ≤ x ≤ 4) composition series were prepared through a solid state mixed oxide route to investigate the effect of Sm⁺³ substitution for La⁺³ on the phase, microstructure and microwave dielectric properties. At x = 0–3, all the compositions formed single phase ceramics within the detection limit of in-house X-ray diffraction when sintered in the temperature range 1500–1580 °C. At x = 4, a mixture of Sm₂Ti₂O₇ and SrTiO₃ formed. The maximum Sm⁺³-containing single phase ceramics, SrLaSm₃Ti₅O₁₇, exhibited relative permittivity (ε_r) = 42.6, temperature coefficient of resonant frequency (τ _f ) = −96 ppm/^oC and quality factor (Q _u f _o ) = 7332 GHz. An analysis of results presented here indicates that SrLa_4−xSm_xTi₅O₁₇ ceramics, exhibiting τ _f  ~ 0 and ε_r ~ 53 could be achieved at x ~ 1.4 but at the cost of decrease in Q _u f _o .     

Effects of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> doping on the microstructure and the dielectric temperature characteristics of barium titanate ceramics

In this work, the effects of Nb₂O₅ addition on the dielectric properties and phase formation of BaTiO₃ were investigated. A core–shell structure was formed for Nb-doped BaTiO₃ resulted from a low diffusivity of Nb⁵⁺ ions into BaTiO₃ when grain growth was inhibited. In the case of 0.3–4.8 mol% Nb₂O₅ additions, two dielectric constant peaks were observed. The Curie dielectric peak was determined by the ferroelectric-paraelectric transition of grain core, whereas the secondary broad peak at lower temperature was due to strong chemical inhomogeneity in Nb-doped BaTiO₃ ceramics. The dielectric constant peak at Curie temperature was markedly depressed with the addition of Nb₂O₅. On the other hand, the secondary dielectric constant peak was enhanced when sintered above 1280 °C for higher Nb₂O₅ concentrations (≥1.2 mol%). The Curie temperature was shifted to higher temperatures, whereas the transition temperature corresponding to the secondary peak moved to lower temperatures as increasing the amount of Nb₂O₅ more than 1.2 mol%. The decrease of this lower transition temperature was assumed to be closely related with the secondary phase formation when Nb concentration greater than 1.2 mol%. From XRD analyses, a large amount of secondary phases was observed when Nb₂O₅ amount exceeded 1.2 mol%. The coefficients of thermal expansion of Nb-doped BaTiO₃ were increased with increasing Nb₂O₅ contents, resulting in large internal stress between cores and shells. Therefore, the shift of Curie temperature to higher temperatures was attributed to internal stress resulting from the formation of a core–shell structure and a large amount of secondary phase grains.     

Properties of neodymium-doped Ca<Subscript>0.15</Subscript>Sr<Subscript>1.85</Subscript>Bi<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>18</Subscript> ferroelectric ceramics

Bismuth-layered compound Ca_0.15Sr_1.85Bi_4−xNd_xTi₅O₁₈ (CSBNT, x = 0–0.25) ferroelectric ceramics samples were prepared by solid-state reaction method. The effects of Nd³⁺ doping on their ferroelectric and dielectric properties were investigated. The remnant polarization Pr of CSBNT ceramics increases at beginning then decreases with increasing of Nd³⁺ doping level, and a maximum Pr value of 9.6 μC/cm² at x = 0.05 was detected with a coercive field Ec = 80.2 kV/cm. Nd³⁺ dopant not only decreases the Curie temperature linearly, but also the dielectric constant (ε_r) and dielectric loss tangent (tan δ). The magnitudes of ε_r and tan δ at the frequency of 100 kHz are estimated to be 164 and 0.0083 at room temperature, respectively.     

Crystal chemistry and domain structure of rare-earth doped BiFeO<Subscript>3</Subscript> ceramics

Bi_(1−x)RE _x FeO₃ (BREF100x, RE = La, Nd, Sm, Gd) has been investigated with a view to establish a broad overview of their crystal chemistry and domain structure. For x ≤ 0.1, the perovskite phase in all compositions could be indexed according to the rhombohedral, R3c cell of BiFeO₃. For Nd and Sm doped compositions with 0.1 < x ≤ 0.2 and x = 0.15, respectively, a new antipolar phase was stabilised similar in structure to PbZrO₃. The orthoferrite, Pnma structure was present for x > 0.1, x > 0.15, and x > 0.2 in Gd, Sm, and Nd doped BiFeO₃, respectively. For x > 0.2, La doped compositions became pseudocubic at room temperatures but high angle XRD peaks were broad and asymmetric. These compositions have been indexed as the orthoferrite structure. It was concluded therefore that the orthoferrite phase appeared at lower values of x as the RE ferrite, end member tolerance factor decreased. However, the compositional window over which the PbZrO₃-like phase was stable increased with increasing end member tolerance factor but was not found as single phase in La doped compositions at room temperature. On heating, the PbZrO₃-like phase in BNF20 transformed to the orthoferrite, Pnma structure. T _C for all compositions decreased with decreasing A-site, average ionic polarizabilty and tolerance factor. For compositions with R3c symmetry, superstructure and orientational, and translational (antiphase) domains were observed in a manner typical of an antiphase-tilted, ferroelectric perovskite. For the new PbZrO₃-like phase orientational domains were observed.     

Influence of Zr doping on the dielectric properties of CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> ceramics

Pure and Zr-substituted CaCu₃(Ti_1−x Zr _x )₄O₁₂ (x = 0, 0.01, 0.02, 0.03) ceramics were prepared by the Pechini method. X-ray powder diffraction analysis indicated the formation of single-phase compound, and all the diffraction peaks were completely indexed by the body-centered cubic perovskite-related structure. The effects of Zr⁴⁺ ion substituting partially Ti⁴⁺ ion on the dielectric properties were investigated in frequency range between 100 Hz and 1 GHz. The low frequency (f ≤ 10⁵ Hz) dielectric constant decreases with Zr substitution and the high frequency (f ≥ 10⁷ Hz) dielectric constant is unchanged. Interestingly, a low-frequency relaxation was observed at room temperature through Zr substitution. The observed dielectric properties in Zr-substituted samples were discussed using the internal barrier layer capacitor model. A corresponding equivalent circuit was adopted to explain the dielectric dispersion. The characteristic frequency of low-frequency relaxation rises due to the decrease of the resistivity of grain boundary with Zr substitution, which is likely responsible for the large low-frequency response at room temperature.     

Diffuse ferroelectric phase transition in SrTiO<Subscript>3</Subscript>-BiScO<Subscript>3</Subscript> system ceramics

Ceramic samples of the (1−x)SrTiO₃-(x)BiScO₃ system with x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 have been synthesized for the first time. X-ray diffraction data showed that the samples with x = 0.2, 0.3, and 0.4 at room temperature comprise the mixture of two phases: (i) cubic nonpolar phase with Pm3m structure and (ii) tetragonal polar phase with P4mm structure. The temperature dependences of permittivity and dielectric loss tangent of these samples exhibit anomalies characteristic of ferroelectrics with diffuse phase transitions.     

The effect of CuO doping on the microstructures and dielectric properties of BaTiO3 ceramics

(1 − x) BaTiO₃/xCuO ceramic pellets with x = 0, 0.2, 0.4, 0.6, and 0.8% respectively were prepared by the traditional solid-state reaction method. The effect of CuO doping on the microstructure and dielectric properties of BaTiO₃ ceramics has been investigated. SEM and XRD results at room temperature show that the grain size grows with the increase of CuO content under the same sintering conditions and the crystal structure undergoes the mixed phases (pseudocubic/tetragonal) to tetragonal phase transition with the growth of grain size. Regular shape grains with average grain size ~2 μm are detectable in the specimens as CuO dopant content adds up to 0.8% and the crystal structure has completely changed into tetragonal phase. The permittivity increases markedly for CuO dopant content x = 0.2 ~ 0.4% and the dielectric loss decreases significantly after being doped by CuO and down to a minimum value for x = 0.8%. In addition, the permittivity and dielectric loss display a good stability in a broad frequency range comparing that of pure BaTiO₃ ceramics.     

Dielectric and piezoelectric properties of MnO<Subscript>2</Subscript>-doped K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>Nb<Subscript>0.92</Subscript>Sb<Subscript>0.08</Subscript>O<Subscript>3</Subscript> lead-free ceramics

Lead-free MnO₂-doped K_0.5Na_0.5Nb_0.92Sb_0.08O₃ ceramics have been fabricated by a conventional ceramic technique and their dielectric and piezoelectric properties have been studied. Our results show that a small amount of MnO₂ (0.5–1.0 mol%) is enough to improve the densification of the ceramics and decrease the sintering temperature of the ceramics. The co-effects of MnO₂ doping and Sb-substitution lead to significant improvements in the ferroelectric and piezoelectric properties. The K_0.5Na_0.5Nb_0.92Sb_0.08O₃ ceramic with 0.5 mol%MnO₂ doping possesses optimum propeties: d ₃₃ = 187 pC/N, k _P = 47.2%, ε _r = 980, tanδ = 2.71% and T _c = 287 °C. Due to high tetragonal-orthorhombic phase transition temperature (T _O-T ~ 150 °C), the K_0.5Na_0.5Nb_0.92Sb_0.08O₃ ceramic with 0.5 mol%MnO₂ doping exhibits a good thermal stability of piezoelectric properties.     

Structure and dielectric properties of (1 − <Emphasis Type="Italic">x</Emphasis>)BiFeO<Subscript>3</Subscript> · <Emphasis Type="Italic">x</Emphasis>(KBi)<Subscript>1/2</Subscript>TiO<Subscript>3</Subscript> perovskite solid solutions

(1 − x)BiFeO₃ · x(KBi)_1/2TiO₃ ceramics have been prepared by solid-state reactions. The system has been shown to contain a continuous series of perovskite solid solutions. In the composition ranges x < 0.4, 0.4 < x < 0.9, and x > 0.9, the solid solutions have rhombohedral, orthorhombic, and tetragonal structures, respectively. The observed compositional phase transitions are accompanied by sharp changes in unit-cell volume. We describe the dielectric properties of the orthorhombic solid solutions, which demonstrate that these materials exhibit relaxor behavior.     

Dielectric and ferromagnetic properties of BaTiO<Subscript>3</Subscript>/Ni<Subscript>0.93</Subscript>Co<Subscript>0.02</Subscript>Cu<Subscript>0.05</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> composites

xBaTiO₃ + (1 − x)Ni_0.93Co_0.02Cu_0.05Fe₂O₄ (x = 0.5, 0.6, 0.7, 0.8) composites with ferroelectric–ferromagnetic characteristics were synthesized by the ceramic sintering technique. The presence of constituent phases in the composites was confirmed by X-ray diffraction studies. The average grain size was calculated by using a scanning electron micrograph. The dielectric characteristics were studied in the 100 kHz to 15 MHz. The dielectric constant changed higher with ferroelectric content increasing; and it was constant in this frequency range. The relation of dielectric constant with temperature was researched at 1, 10, 100 kHz. The Curie temperature would be higher with frequency increasing. The hysteresis behavior was studied to understand the magnetic properties such as saturation magnetization (M _s). The composites were a typical soft magnetic character with low coercive force. Both the ferroelectric and ferromagnetic phases preserve their basic properties in the bulk composite, thus these composites are good candidates as magnetoelectric materials.