Classical coupled thermoelasticity in laminated composite plates based on third-order shear deformation theory

A new mixed finite element formulation is proposed to analyze transient coupled thermoelastic problems. Coupled model of dynamic thermoelasticity is selected for a laminated composite and a homogeneous isotropic plate. For the particular finite element developed here, there are 15 degrees of freedom at each node. Two simply supported plates are considered subjected to sinusoidally distributed mechanical and thermal loading. It is seen, by comparing the present results with results from the NISA II FEM code, that they are in good agreement.     

Vibration and stability of cross-ply laminated composite plates according to a global higher-order plate theory

Natural frequencies and buckling stresses of cross-ply laminated composite plates are analyzed by taking into account the effects of shear deformation, thickness change and rotatory inertia. By using the method of power series expansion of displacement components, a set of fundamental dynamic equations of a two-dimensional higher-order theory for thick rectangular laminates subjected to in-plane stresses is derived through Hamilton's principle. Several sets of truncated approximate theories are applied to solve the eigenvalue problems of a simply supported thick laminated plate. In order to assure the accuracy of the present theory, convergence properties of the lowest natural frequency and buckling stress are examined in detail. Numerical results are compared with those of the published existing theories and FEM solutions. The modal displacement and stress distributions in the thickness direction are obtained and plotted in figures. It is noticed that the present global higher-order approximate theories can predict the natural frequencies, buckling stresses and stresses of thick multilayered composite laminates as accurately as three-dimensional solutions.     

Dynamic analysis of laminated composite plates traversed by a moving mass based on a first-order theory

The dynamic response of angle-ply laminated composite plates traversed by a moving mass or a moving force is investigated. For this purpose, a finite element method based on the first-order shear deformation theory is used. Stationary and adaptive mesh techniques have been applied as two different meshing schemes. The adaptive mesh strategy is then used to avoid off-nodal position of moving mass. In this manner, the finite element mesh is continuously adapted to follow and comply with the path of moving mass. A Newmark direct integration method is employed to solve the equations of motion. Parametric study is directed to find out how different parameters like mass of the moving object as well as the type of the angle-ply laminated composite plates affect the dynamic response. Numerical results show the significant effects of the stacking order on the dynamic responses of the composite structures under a moving mass. It is found that although [30/−60/−60/30] lamination shows the highest maximum vertical deflection but [−45/45/45/−45] lamination has the highest value of the dynamic amplification factor. The dynamic amplification factor for different stacking orders and mass velocities is less than 1.25.     

Analysis of thick orthotropic laminated composite plates based on higher order shear deformation theory

A two-dimensional finite element model is presented to perform the linear static analysis of laminated orthotropic composite plates based on a refined higher order shear deformation theory. The theory accounts for parabolic distributions of transverse shear stresses and requires no shear correction factors. A finite element program is developed using serendipity element with seven degrees of freedom per node. The present solutions are compared with those obtained using three-dimensional elasticity theory and those obtained by other researchers. The theory accurately predicts displacements and transverse shear stresses compared to previously developed theories for thick plates and are very close to three-dimensional elasticity solutions. The effects of transverse shear deformation, material anisotropy, aspect ratio, fiber orientation and lamination sequence on transverse shear stresses are investigated. The error in values of transverse shear stresses decreases as the number of lamina increases, for a plate of same thickness. An increase in degree of anisotropy results in lower values of deflection in the plate. For cross-ply plate an increase in anisotropy results in an increase in effective stress whereas for angle-ply plate the effect is almost negligible. Through thickness variation of transverse shear stresses are independent of anisotropy. The maximum effective stress increases exponentially at lower values of anisotropy and reaches to an asymptotic value at higher values. The stacking sequence has a significant effect on the transverse deflections and shear stress. Rectangular plates experience less effective, in-plane and transverse shear stresses compared to square plates.     

Wave propagation and transient response of a FGM plate under a point impact load based on higher-order shear deformation theory

In this paper, the wave propagation and transient response of an infinite functionally graded plate under a point impact load are presented. The effective material properties of functionally graded materials (FGMs) for the plate are assumed to vary continuously through the plate thickness and be distributed according to a volume fraction power law along the plate thickness. Based on the higher-order shear deformation theory and considering the effect of the rotary inertia, the governing equations of the wave propagation in the functionally graded plate are derived by using the Hamilton’s principle. The analytic dispersion relation of the functionally graded plate is obtained by means of integral transforms and a complete discussion of dispersion for the functionally graded plate is given. Then, using the dispersion relation and integral transforms, exact integral solutions for the functionally graded plate under a point impact load are obtained. The transient response curves of the functionally graded plates are plotted and the influence of volume fraction distributions on transient response of functionally graded plates is analyzed. Finally, the solutions of the higher-order shear deformation theory and the first-order shear deformation theory are studied.     

A generalized higher-order theory for buckling of thick multi-layered composite plates with normal and transverse shear strains

The onset of buckling in square laminated multi-layered composite plates, subject to unidirectional in-plane loads, is investigated within the framework of a generalized higher-order shear deformation theory suitable to capture significant transverse shear and thickness-wise deformation effects. The displacement field is expanded in a Taylor series of the thickness coordinate with arbitrary polynomial degree; in turn, the series coefficients, expressed as a superposition of admissible functions, are determined according to the Rayleigh–Ritz method. Truly higher-order polynomial terms, along with a sufficient number of in-plane admissible functions, are shown to be necessary for convergence towards the fundamental buckling load multiplier. As a by-product, reduced-order models are identified for various plate geometries and lamination schemes. The sensitivity of the lowest buckling load with respect to the nondimensional parameters (the thickness ratio, the ratio between the elastic moduli, the ply angle) is investigated. In particular, the attention is focused on the cross-over phenomenon between the lowest two buckling eigenvalues in multi-layered composite square plates with different lamination schemes. The presented results shed light onto the buckling behavior of thick shear-deformable multi-layered plates.     

Buckling analysis of corrugated plates using a mesh-free Galerkin method based on the first-order shear deformation theory

This paper deals with elastic buckling analysis of stiffened and un-stiffened corrugated plates via a mesh-free Galerkin method based on the first-order shear deformation theory (FSDT). The corrugated plates are approximated by orthotropic plates of uniform thickness that have different elastic properties along the two perpendicular directions of the plates. The key to the approximation is that the equivalaent elastic properties of the orthotropic plates are derived by applying constant curvature conditions to the corrugated sheet. The stiffened corrugated plates are analyzed as stiffened orthotropic plates. The stiffeners are modelled as beams. The stiffness matrix of the stiffened corrugated plate is obtained by superimposing the strain energy of the equivalent orthotropic plate and the beams after implementing the displacement compatibility conditions between the plate and the beams. The mesh free characteristic of the proposed method guarantee that the stiffeners can be placed anywhere on the plate, and that remeshing is avoided when the stiffener positions change. A few selected examples are studied to demonstrate the accuracy and convergence of the proposed method. The results obtained for these examples, when possible, are compared with the ANSYS solutions or other available solutions in literature. Good agreement is evident for all cases. Some new results for both trapezoidally and sinusoidally corrugated plates are then reported.     

A nth-order meshless generalization of Reddy’s third-order shear deformation theory for the free vibration on laminated composite plates

In this paper, a nth-order shear deformation theory is proposed to analyze the free vibration of laminated composite plates. The present nth-order shear deformation theory satisfies the zero transverse shear stress boundary conditions on the top and bottom surface of the plate. Reddy’s third-order theory can be considered as a special case of present nth-order theory (n = 3). Natural frequencies of the laminated composite plates with various boundary conditions, side-to-thickness ratios, material properties are computed by present nth-order theory and a meshless radial point collocation method based on the thin plate spline radial basis function. The results are compared with available published results which demonstrate the accuracy and efficiency of present nth-order theory.     

Dynamic analysis of laminated composite plates subjected to a moving oscillator by FEM

This paper presents a finite element model based on the first order shear deformation theory to investigate the dynamic behavior of laminated composite plates traversed by a moving oscillator. The oscillator model is assumed to be consisting of two nodal masses that are connected by means of a spring-damper unit. The governing equations of motion of two sub-systems are separately integrated by applying the Newmark’s time integration procedure. Then, the obtained equations are coupled and the responses of system components are calculated in each time step. The accuracy of algorithm is verified by comparing the numerical results of static, free vibration and simplified moving force problems analysis with the available exact solutions and other numerical results in the literature. Also, the effects of mass ratio, damping ratio of system components, stiffness of suspension system, velocity and eccentricity of moving oscillator on dynamic responses is parametrically studied. This algorithm can be applied to various boundary conditions, lamination schemes and fiber angels.     

Flexural analysis of laminated plates based on trigonometric layerwise shear deformation theory

ABSTRACT

A trigonometric layerwise shear deformation theory is developed for the flexural analysis of laminated plates. The present theory achieves in-plane displacement continuity, transverse shear stress continuity, and traction-free boundary condition. Hence, botheration of shear correction coefficient is neglected. The governing differential equation and boundary conditions are obtained from the principle of virtual work. Although the present analytical method is bounded to a corner supported boundary condition, it neglects the numerical and computational error. Like first-order shear deformation theory, the present theory possesses five numbers of unknowns. Several numerical predictions are carried out and results are compared with those of other existing numerical approaches.     

Static and dynamic analysis of laminated composite and sandwich plates and shells by using a new higher-order shear deformation theory

A new higher order shear deformation theory for elastic composite/sandwich plates and shells is developed. The new displacement field depends on a parameter “m”, whose value is determined so as to give results closest to the 3D elasticity bending solutions. The present theory accounts for an approximately parabolic distribution of the transverse shear strains through the shell thickness and tangential stress-free boundary conditions on the shell boundary surface. The governing equations and boundary conditions are derived by employing the principle of virtual work. These equations are solved using Navier-type, closed form solutions. Static and dynamic results are presented for cylindrical and spherical shells and plates for simply supported boundary conditions. Shells and plates are subjected to bi-sinusoidal, distributed and point loads. Results are provided for thick to thin as well as shallow and deep shells. The accuracy of the present code is verified by comparing it with various available results in the literature.     

Analysis of laminated composite plates using a higher-order shear deformation theory

A higher-order shear deformation theory is used to analyse laminated anisotropic composite plates for deflections, stresses, natural frequencies and buckling loads. The theory accounts for parabolic distribution of the transverse shear stresses, and requires no shear correction coefficients. A displacement finite element model of the theory is developed, and applications of the element to bending, Vibration and stability of laminated plates are discussed. The present solutions are compared with those obtained using the classical plate theory and the three-dimensional elasticity theory.     

Nonlinear bending analysis of annular FGM plates using higher-order shear deformation plate theories

This paper addresses the axisymmetric nonlinear bending analysis of an annular functionally graded plate under mechanical loading based on FSDT and TSDT. Using nonlinear von-Karman theory, the discretized equations are solved using the dynamic relaxation (DR) method combined with the finite difference technique. The effects of the material constant n, boundary conditions, thickness-to-radius ratio and shear deformation are studied. The results show that although, the difference between TSDT and FSDT becomes greater with an increasing thickness-to-external radius ratio, the effects of different types of boundary conditions is also of great importance.     

Nonlinear vibration of an initially stressed laminated plate according to a higher-order theory

The nonlinear behavior of laminated plates in a general state of non-uniform initial stress was studied at large vibration amplitudes. The nonlinear governing equations of this study were derived using a higher-order theory approach. The results were compared with the Mindlin plate theory’s results. The results showed that the higher-order shear deformation terms had a significant influence on the plate in a large amplitude vibration when the thickness ratio decreases and the plate was stacked with less layers. In addition, the effect of Young’s modulus in the thickness direction on the frequency ratio was significant for the two-layered plate. However, the results of the four-layered plates were not affected too much.     

Free vibration and stability of functionally graded plates according to a 2-D higher-order deformation theory

Natural frequencies and buckling stresses of plates made of functionally graded materials (FGMs) are analyzed by taking into account the effects of transverse shear and normal deformations and rotatory inertia. The modulus of elasticity of the plates is assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. By using the method of power series expansion of displacement components, a set of fundamental dynamic equations of a two-dimensional (2-D) higher-order theory for rectangular functionally graded (FG) plates is derived through Hamilton’s principle. Several sets of truncated approximate theories are applied to solve the eigenvalue problems of FG plates with simply supported edges. In order to assure the accuracy of the present theory, convergence properties of the fundamental natural frequency are examined in detail. Critical buckling stresses of FG plates subjected to in-plane stresses are also obtained and a relation between the buckling stress and natural frequency of simply supported FG plates without in-plane stresses is presented. The distributions of modal displacements and modal stresses in the thickness direction are obtained accurately by satisfying the surface boundary conditions of a plate. The modal transverse stresses have been obtained by integrating the three-dimensional equations of motion in the thickness direction starting from the top or bottom surface of a plate. The present numerical results are also verified by satisfying the energy balance of external and internal works are considered to be sufficient with respect to the accuracy of solutions. It is noticed that the present 2-D higher-order approximate theories can predict accurately the natural frequencies and buckling stresses of simply supported FG plates.     

Analysis of isotropic and multilayered plates and shells by using a generalized higher-order shear deformation theory

This paper introduces a generalized 5 degrees of freedom (DOF) higher-order shear deformation theory (HSDT) to study the bending and free vibration of plates and shells, which may be used to create other HSDTs. It also introduces a new HSDT for shells that is more accurate than many available HSDTs despite having the same 5DOF, and which is also able to reproduce the well-known Soldatos’ HSDT as special case. The governing equations and boundary conditions of the generalized formulation are derived by employing the principle of virtual work. These equations are solved via Navier-type closed-form solutions. Static and dynamic results are presented for plates and cylindrical and spherical shells with simply supported boundary conditions. Panels are subjected to sinusoidal, distributed and point loads. Results are provided for thick to thin as well as shallow and deep shells. Results from the new and well-known HSDTs introduced and reproduced based on the present generalized 5DOF HSDT are compared with the exact three-dimensional elasticity solution. The present new HSDT for plates and shells is found to be more accurate than the well-known HSDTs developed by other authors, for analyzing the static and free vibration of isotropic and multilayered composite plates and shells.     

A generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates based on isogeometric analysis

This paper presents a generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates. We exploit a higher-order shear deformation theory in each layer such that the continuity of the displacement and transverse shear stresses at the layer interfaces is ensured. Thanks for enforcing the continuity of the displacement and transverse shear stresses at an inner-laminar layer, the minimum number of variables is retained from the present theory in comparison with other layerwise theories. The method requires only five variables, the same as what obtained from the first- and higher-order shear deformation theories. In comparison with the shear deformation theories based on the equivalent single layer, the present theory is capable of producing a higher accuracy for inner-laminar layer shear stresses. The free boundary conditions of transverse shear stresses at the top and bottom surfaces of the plate are fulfilled without any shear correction factors. The discrete system equations are derived from the Galerkin weak form, and the solution is obtained by isogeometric analysis (IGA). The discrete form requires the C¹ continuity of the transverse displacement, and hence NURBS basis functions in IGA naturally ensure this condition. The laminated composite and sandwich plates with various geometries, aspect ratios, stiffness ratios and boundary conditions are studied. The obtained results are compared with the 3D elasticity solution, the analytical as well as numerical solutions based on various plate theories.     

An accurate higher-order theory and C finite element for free vibration analysis of laminated composite and sandwich plates

At present, it is difficult to accurately predict natural frequencies of sandwich plates with soft core by using the C⁰ plate bending elements. Thus, the C¹ plate bending elements have to be employed to predict accurately dynamic response of such structures. This paper proposes an accurate higher-order C⁰ theory which is very different from other published higher-order theory satisfying the interlaminar stress continuity, as the first derivative of transverse displacement has been taken out from the in-plane displacement fields of the present theory. Therefore, the C⁰ interpolation functions is only required during its finite element implementation. Based on the Hamilton’s principle and Navier’s technique, analytical solutions to the natural frequency analysis of simply-supported laminated plates have been presented. To further extend the ranges of application of the proposed theory, an eight-node C⁰ continuous isoparametric element is used to model the proposed theory. Numerical results show the present C⁰ finite element can accurately predict the natural frequencies of sandwich plate with soft core, whereas other global higher-order theories are unsuitable for free vibration analysis of such soft-core structures.     

Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory

A two-dimensional global higher-order deformation theory is presented for thermal buckling of cross-ply laminated composite and sandwich plates. By using the method of power series expansion of continuous displacement components, a set of fundamental governing equations which can take into account the effects of both transverse shear and normal stresses is derived through the principle of virtual work. Several sets of truncated Mth-order approximate theories are applied to solve the eigenvalue problems of a simply supported multilayered plate. Modal transverse shear and normal stresses can be calculated by integrating the three-dimensional equations of equilibrium in the thickness direction, and satisfying the continuity conditions at the interface between layers and stress boundary conditions at the external surfaces. Numerical results are compared with those of the published three-dimensional layerwise theory in which both in-plane and normal displacements are assumed to be C⁰ continuous in the continuity conditions at the interface between layers. Effects of the difference of displacement continuity conditions between the three-dimensional layerwise theory and the global higher-order theory are clarified in thermal buckling problems of multilayered composite plates.     

Post-buckling analysis of composite plates containing embedded delaminations with arbitrary shape by using higher order shear deformation theory

The compressive post-buckling behavior of composite laminates containing embedded delamination with arbitrary shape is investigated analytically. For modeling the embedded delamination, the laminate is divided into three smaller regions. The higher order shear deformation theory is implemented and the formulation is based on the Rayleigh-Ritz approximation technique by the application of the simple/complete polynomial series for each region. The nonlinear equilibrium equations, which are achieved through the application of the principle of Minimum Potential Energy, are solved by employing the Newton-Raphson iterative procedure. Some interesting results are obtained and compared with those achieved by the finite element method of analysis using ANSYS commercial software. A good agreement is seen to exist between the results. This is while for a given level of accuracy in the results, ANSYS requires a markedly larger number of degrees of freedom compared to that needed by the developed method. Moreover, a considerable reduction in the load carrying capacity of laminate is noticed due to the presence of delamination.