共查询到20条相似文献,搜索用时 46 毫秒
1.
针对阵列式超声探测系统空间限制和固有盲区的问题,提出了一种新型的超声波周向扫描方案.设计了可以实现调节声波信号发射角度和转速旋转扫描机构,该结构简单可靠.对超声波声场进行仿真,使用具有增强声场和指向性的超声传感器.在同步扫描系统的基础上,对单声束探测目标车辆信息、回波信号和脉冲频率与转速匹配关系进行数值仿真分析,确定信号脉冲频率与电机扫描转速的最佳匹配参数.使用原理样机进行扫描探测实验,结果表明:当超声脉冲频率f≥27 Hz,周向扫描转速范围n=233 r/min,周向扫描探测系统能捕获速度低于70km/h的目标车辆,同时验证了超声波周向扫描探测可行性,为单束超声周向探测系统设计提供依据. 相似文献
2.
3.
4.
5.
6.
7.
8.
基于长短窗口结合的傅里叶变换技术,设计出一种适用于装甲车辆通信设备的信号检测系统,该检测系统由射频处理模块、中频处理模块和ARM处理模块组成.试验室测试结果表明,该系统能够对车载通信设备跳频信号主要性能参数进行实时检测,达到了判定跳频设备工作状态是否正常的目标,从而满足了装甲车辆通信的正常需求. 相似文献
9.
10.
11.
Tetraacetyldibenzylhitane (TADBIW) was subjected to debenzylation by nitrosating with inorganic materials available commercially to synthesize tetraacetyldinitrosohexaazaisowurtzitane (TADNSIW). TADNSIW was purified, and its structure was determined by FTIR, 1H NMR, MS and element analysis. The debenzylation reaction of TADBIW gave quantitative benzaldehyde as a by-product. This indicates that the reaction produces an imine cation as an intermediate. Hexanitrohexaazaisowurtzitane (HNIW) was prepared from unpurified TADNSIW with the yield over 96.0 % and the purity more than 98.0 %. And the mechanism of the reaction from TADNSIW to HNIW is proposed to be oxidation of nitroso and nitration of acetyl on the molecule of TADNSIW, This reaction system involved is simple, and the reaction can complete within a short time and under mild conditions. The product can be easily to separate and the waste disposed readily. 相似文献
12.
The technique of watermarking has been introduced into 2D vector maps for many potential applications such as protecting the copyright of important GIS (geographical information system) data and tracing the data source of military maps. In most previous works, although the validity of the map data could be preserved during the embedding procedure, the shape-distortions of the map elements are usually neglected which would tend to degrade the invisibility of the watermarking schemes. A shape-preserving algorithm for watermarking 2D vector maps is presented in this paper. A 1D distance sequence extracted from the original map is adopted as the cover data instead of 2D coordinates. A watermark bit is represented by changing the distributions of the cover data. The embedding procedure induces lower shape-distortions than in former works. Experimental results indicate better invisibility of the proposed scheme, as well as its robustness to certain attacks such as map simplification, interpolation, additive noise and most geometric transforms. 相似文献
13.
Open rule-setting method advanced in this paper concentrates on providing designers of engines with a convenient way to express their design innovations and develop the expected prototypes in the early CAD stage, and constitute effective models for the following analysis process of CAE and CAPP. The problems arisen in the process of conceptual design with the traditional experience-based development method are analyzed. Based on those analyses, open rule-setting method is presented and some associated technical problems are discussed. The functional framework of open rule-setting system was built as software engineering methods. The speciality of the engine product as a kind of complex product and the requirement of the engine product based on its structural particularity to rule-setting system are considered carefully. A demonstration is supplied to illustrate how the open rule-setting method enhances the efficiency and quality of the engine conceptual design. 相似文献
14.
By analyzing the working principle of Linux network device driver, discussing the Linux network driver structure and its key technologies, the general network driver structure and its design methodologies in Linux system are summarized. Through modifying the network device driver of Linux device driver 3rd version snull, c and improving the COW technology, the Zero-Copy technology in Linux (kernel version 2.6.11 ) is implemented. In the end, the success test tells us that the thorough analysis of network device driver is the foundation of many applications, and it also provides a certain improvement to a lot of real applications, even to military application development. 相似文献
15.
By analyzing the influencing factors of part quality making of sheet alloy of titanium by vibra cutter, the shape of upper reamer is set as cylinder and wedge-shaped form, and the lower reamer as plain and hemicycle form, and its main structural parameters are defined as well. Then it is validated further that such improved vibra cutter reamer can be used to process curve-edged parts of titanium alloy sheet. The experimental result shows that the titanium alloy sheet parts processed by above equipment have no sharpen angles for convex parts and evident crevasse of concave-edged part. In summary, such improvement can eliminate the free-waved edge and improve the manufacture quality of titanium alloy sheet parts greatly. 相似文献
16.
The initiating behavior of fine-grained explosives by small flyer is studied. The diameter of small flyer in this device is 1 ram. The test results indicate that the granularity of explosives has great effect on its flyer initiating sensitivity.The flyer initiating sensitivity of the fine-grained explosives is higher and the critical initiating energy is lower than that of common explosives. For common explosive, the flyer initiating sensitivity increases as the density is reduced. But for the fine-grained explosive, the test results are exactly opposite. 相似文献
17.
Multi-laser-target tracking is an important subject in the field of signal processing of laser warners. A clustering method is applied to the measurement of laser warner, and the space-time fusion for measurements in the same cluster is accomplished. Real-time tracking of multi-laser-target and real-time picking of multi-laser-signal are introduced using data fusion of the measurements. A prototype device of the algorithm is built up. The results of experiments show that the algorithm is very effective. 相似文献
18.
The nonlinear dynamic model of spinning ballistic missiles is established during the first boosting phase of the missile. Based on the conventional backstepping sliding mode control and the assumption of a two time-scale separation of missile dynamics, a graded sliding mode controller is designed with two sub-sliding surfaces which have invariability to external disturbances and parameter perturbations, and a matrix which comprises three first order low pass filters is introduced to prevent "explosion of terms". Owing to the upper bounds of the uncertainties are difficult to obtain in advance, adaptive laws are introduced to estimate the values of the uncertainties in real-time. Eventually, the numerical simulation results given to show the proposed controller can ensure the steady flight of missiles. 相似文献
19.
An expression for estimating the aeroheating on a warhead nose at different supersonic speeds is proposed by incorporating CFD (computational fluid dynamics) and the least-square method. Compared with the traditional estimation formula, the expression is more accurate, convenient and can be used in the optimized design of warheads. The error from the result obtained in the test of a ball cartridge flight is less than 3 %. It satisfies the engineering requirements. 相似文献
20.
A method to calculate the surface shape error, which is caused by the installing error between the workpiece and the lapping tool in the process of form lapping, is proposed. The mathematical model which the installing translation error influences on the workpiece surface shape error is established. The changing rule of the error is simulated through the calculating example of the paraboloid workpiece. The results indicate that the surface shape error of the workpiece is increasing with the increase of the installing translation error, it is also increasing gradually along the center point of the curve surface to the edge, and the influence is severer to the curve surface with great curvature than that of the small curvature when the translation error is the same. 相似文献