共查询到20条相似文献,搜索用时 625 毫秒
1.
分析球磨机配套辅机和运行主电机的控制电路,介绍利用西门子可编程逻辑控制器(Programmable Logic Controller,PLC)、触摸屏对球磨机进行全自动化运行改造的可行性及实现方法,同时简单介绍球磨机配套设备、球磨机本体静压油站、主电机轴承润滑油站、齿轮喷射油站、气动离合器、高压开关柜以及励磁启动柜在整个球磨机系统中的作用和控制原理。该控制系统不仅可以实现球磨机一键全自动化启动和运行中状态的实时监控,还能提高球磨机的运行稳定性。 相似文献
2.
料位检测仪是利用球磨机运行时发出的振动信号,根据对各台不同工况下球磨机振动信号的分析,得出了表征球磨机变化情况的信号,采用该信号并融合磨煤机其他的运行信号,就能将球磨机控制在最佳运行工况。这种控制自1999年起已在多台中储式制粉系统上成功应用。运行表明,该技术能使电站制粉系统运行更安全、更经济。 相似文献
3.
4.
从球磨机设备原理、性能和结构等方面,论述了一种球磨机的新型传动结构形式.针对传统球磨机在运行中出现的不足,从理论上进行了分析. 相似文献
5.
6.
为进一步提高矿山球磨机运行的安全性,需要加强对球磨机安装方法的学习,积极掌握球磨机调试技术,从而使得球磨机在矿山行业得到广泛运用。本文首先介绍矿山球磨机的特点和构成,然后分析矿山球磨机的安装与调试方法,指导矿山生产工作。 相似文献
7.
8.
在选矿生产中,用于磨矿作业的磨矿设备主要是球磨机、棒磨机和自磨机,其中应用最多的是格子型和溢流型球磨机。Ф1500×7000溢流型球磨机是一种小型非标准管型磨机,对于非标准球磨机来说,磨机功率确定是设计的关键。通过介绍了该球磨机功率的确定方法,并结合现场运行情况,验证方法的合理性,为类似规格的非标准球磨机功率确定提供了借鉴和参考。 相似文献
9.
10.
球磨机作为氧化铝行业的主要设备,球磨机的运行状况直接关系到企业的生产稳定及效经济益。球磨机的工作任务主要是将铝土矿和循环母液进行混合,利用钢球进行研磨破碎,产出的原矿浆经过稀释后,送往溶出工序进行下一步的作业。而电动机作为球磨机的驱动部分,可以间接作为球磨机运行效率的体现,并且对实现氧化铝的稳定运行和连续作业打下基础。 相似文献
11.
介绍了石横特钢喷煤系统40tHPS943型碗式中速磨煤机在检修后,磨煤时振动大,通过调整磨煤时的各参数,最终达到正常生产状态的一些分析与措施。 相似文献
12.
13.
板带冷轧机自动报价系统设计 总被引:2,自引:0,他引:2
提供了板带冷轧机自动报价系统流程图 ,阐述了冷轧机机型选择、参数优化、混合编程和三维设计等关键技术 ,为开发板带冷轧机自动报价软件系统提供了基础 相似文献
14.
该文提出了基于快速傅立叶变换的轧辊偏心补偿控制的解决方案,论述了用快速傅立叶变换法提取液压AGC系统轧辊偏心基波信号的方法,并以此信号为依据,控制轧机的压下系统,实现对轧辊偏心的有效补偿,在实际应用中取得了很好的效果. 相似文献
15.
配合间隙是决定球型惯性器件精度和可靠性的关键参数之一,针对球型惯性器球面元件表面有缺口且未完全抛光导致曲率半径难以精确测量,进而难以准确控制球碗、球冠配合间隙瓶颈问题,提出了一种球面惯性元件配合间隙激光差动共焦高精度方法。该方法利用抗散射的激光差动共焦曲率半径测量方法分别对球碗、球冠的曲率半径进行测量,然后利用差动共焦曲率半径测量系统测得的球碗和球冠的半径差来控制球型惯性器球面的配合间隙。理论分析与实验验证表明:该方法测量球冠和球碗配合间隙的相对扩展不确定度优于20×10~(-6),其为惯性器件球冠和球碗配合间隙的高精度测量与控制提供了一种全新的技术手段。 相似文献
16.
0INTRODUCTIONInordertoseekanewmethodofcombinedgaugeandshapecontrol,furtherenhancethegaugeandshapecontrolcapabilityofstripmils... 相似文献
17.
Yeong-Maw Hwang Te-Fu Hwang Chin-Yu Lin Chien-Wen Su 《The International Journal of Advanced Manufacturing Technology》2014,71(1-4):557-563
During foil or ultrathin strip rolling, elastic deflection variation of the work rolls at the contact surface with the strip causes non-uniform thickness distribution of the product in the width direction, which possibly causes a central wrinkling or an edge fracture on the product. This study developed a four-high prototype rolling mill, comprising two work rolls fabricated from an ultrastrength alloy. This prototype rolling mill was composed of a housing frame set, a roll set, a roll gap adjusting mechanism, and a power transmission system. The finite element analysis was used for determining the frame dimensions and work roll diameters. Several experimental rolling passes of stainless steel strips were conducted using this self-developed prototype rolling mill to achieve a 0.05-mm-thick foil product. 相似文献
18.
Biman Das Alberto Garcia-Diaz Corinne A. MacDonald Kalyan K. Ghoshal 《The International Journal of Advanced Manufacturing Technology》2010,51(1-4):15-24
A computer simulation model was used to evaluate a bowl versus inverted bowl assembly line arrangement for normal and exponential distributions and variances equal to 1 and 16. The model was developed on the basis of a realistic case problem and applied to a six-station assembly line. The results show that the inverted bowl is superior to the bowl arrangement for a normal distribution in terms of the total elapsed time evaluation criterion; however, with an exponential distribution, the bowl was found better than the inverted bowl for the same criterion. On the basis of the average percentage of working time and the average time in the system evaluation criteria, the bowl was found superior to the inverted bowl for a normal distribution. Similar results were obtained for an exponential distribution with a variance equal to 1, but no definitive inference could be made with a variance equal to 16. 相似文献
19.
20.
由于轧制工艺的改进,某厂立辊轧机主传动系统需要承受更大的轧制力矩.因此该传动系统的强度如何是问题的关键,文中对轧机的传动系统的动态性能进行了分析,为轧机承受重负荷下的安全运行提供了可靠的依据. 相似文献