Study of hydrodynamic characteristics of particles in liquid–solid fluidized bed with modified drag model based on EMMS

Flow behavior of solid phases is simulated by means of Eulerian–Eulerian in a liquid–solid fluidized bed with modified drag model based on energy-minimization multi-scale (EMMS) method. The modified EMMS drag coefficient is characterized by the treatment of the particle-rich dense phase and the liquid-rich dilute phase as the two interpenetrating continua. It was shown that the modified EMMS drag coefficient can predict reasonably the solid concentration profiles in a liquid–solid fluidized bed. The distributions of solid velocity, granular temperature and granular pressure are predicted. The phenomenon of back-mixing near the wall is found in the liquid–solids fluidized beds.     

Comparative study of the single and double specularity coefficients on two-fluid modeling of a pseudo-2D gas–solid fluidized bed

The specularity coefficient is an unmeasurable parameter in the most popular wall boundary model during the two-fluid modeling of dense gas–solid flows. Using multiphaseEulerFoam solver, the influence of different specularity coefficient setting strategies on the gas–solid flow inside a pseudo-2D fluidized bed has been explored. It is found that the single specularity coefficient plays a regulatory role in the quantitative prediction. Increasing the specularity coefficient would cause a fluidization transition from freely bubbling to slugging, and the bed characteristics such as pressure drop and bed expansion present monotonic nonlinear changes. The double specularity coefficients approach is shown to significantly improve the predictive accuracy through verifying with the measured particle velocities, bubble diameter and rise velocity. In addition, the lognormal bubble size distribution and Gaussian bubble rise velocity distribution are observed. The specularity coefficient for walls in thickness direction is crucial and its different effects are unignorable. Overall, the present study provides a practical strategy of double specularity coefficients for the solid wall boundary conditions during two-fluid modeling.     

Influence of by-product salts and Na2CO3 contents on gas–liquid mass transfer process in wet desulfurization of water gas

Clean Technologies and Environmental Policy - Among the different methods of H2S removal, the wet desulfurization is widely used because of its unique advantages. Wet desulfurization usually...