Aggregation and Phase Separation Phenomenon of Amitriptyline Hydrochloride Under the Influence of Pharmaceutical Excipients

The interaction between the amphiphilic drug amitriptyline hydrochloride (AMT) and the nonionic surfactants used in drug delivery has been investigated. Herein, we report the micellization behavior of AMT in presence of ethoxylated alkyl phenols in aqueous medium and the clouding phenomenon in the absence and presence of different nonionic surfactants in buffer solution. The values of critical micelle concentration (CMC) of AMT obtained using the conductivity method, decrease as nonionic surfactant concentration increases. With an increase in temperature, the CMC first increases and then decreases. At 303.15 K, the maximum CMC values were obtained with or without nonionic surfactant. The results obtained indicate attractive interactions (synergism) between the two mixing amphiphiles in solution. The experimentally obtained critical micelle concentration (CMC) values are always lower than ideal CMC values. Micellar mole fraction (X₁) values, calculated by different proposed models, show the contribution of nonionic surfactant concentration. At a fixed drug concentration (50 mmol kg^?1) and pH (=6.7) nonionic surfactants show continuous increase in cloud point (CP). Increase in drug concentration and pH, in the presence of fixed amounts of nonionic surfactant, increases and decreases the CP, respectively.     

A Star-Shaped Anionic Surfactant: Synthesis,Alkalinity Resistance,Interfacial Tension and Emulsification Properties at the Crude Oil–Water Interface

In this research, a star‐shaped surfactant was synthesized through the chlorination reaction, alkylation reaction and sulfonation reaction of triethanolamine, which is composed of three hydrophobic chains and three sulfonate hydrophilic groups. The critical micelle concentration (CMC) of the surfactant was measured by the surface tension method, and the results showed that it had high surface activity with CMC of 5.53 × 10^?5 mol/L. The surfactant was superior in surface active properties to the reference surfactants SDBS and DADS‐C₁₂. The interfacial tension (IFT) of the studied crude oil–water system (surfactant concentration 0.1 g/L, NaOH concentration 0.5 g/L, and experimental temperature 50 °C) dropped to 1.1 × 10^?4 mN/m, which can fulfil the requirement of surfactants for oil displacement. An aqueous solution of the surfactant and crude oil was emulsified by shaking, which formed a highly stable oil‐in‐water (O/W) emulsion with particle size of 5–20 μm. The oil displacement effect was almost 12%.     

Synergisms in Binary Mixtures of Anionic and pH‐Insensitive Zwitterionic Surfactants and Their Precipitation Behavior with Calcium Ions

This work aims to investigate synergy in anionic and zwitterionic surfactant mixtures, as they result in better interfacial properties and micellization behavior. Various mixtures of the pH‐insensitive zwitterionic surfactant 3‐(decyldimethylammonio) propanesulfonate (Zwittergent 3–10) and sodium dodecylsulfate (SDS) were prepared in aqueous solution at a range of pH values between 2 and 13. The thermodynamic parameters during mixed surfactant adsorption at the air/water interface are obtained and the results show the mixed surfactant systems having superior properties to the constituent surfactants. Experimentally, the mixed surfactant solutions clearly improve the surface activities by lowering the critical micelle concentration (CMC) and lowering the surface tension at the air/water interface. The synergisms are investigated through the interaction parameters estimated from regular solution theory that is used to quantitatively describe the nonideality of surfactant mixtures. High negative interaction parameters are obtained from these surfactant mixtures. Experimental precipitation phase boundaries of SDS in the presence of CaCl₂ were also investigated in mixtures containing pH‐insensitive zwitterionic surfactant at different pH levels from 2 to 13 and SDS mole fractions of 0.25, 0.50, 0.75, and 1.00. Changes in the precipitation phase boundaries are due to the changes in the speciation or activities of the major components both below and above the CMC. As a result, the precipitation phase boundaries are pH dependent. In addition, mixed micellization and counterion binding to the micelle also change the precipitation phase boundary above the CMC. The activity‐based solubility product of calcium dodecylsulfate is also determined from the precipitation phase boundaries below the CMC. X‐ray diffraction patterns and SEM images confirm that only calcium dodecylsulfate precipitates in the soap scum for all pH and surfactant compositions studied.     

Determination of critical micelle concentration of surfactant by ultraviolet absorption spectra

A method was investigated for determining the critical micelle concentration (CMC) by the shift of absorption maxima when an organic compound (I) with ultraviolet absorption was added to an aqueous solution of a surfactant. When I was added to the surfactant solution at higher concentrations (above the CMC), λ_max of I approached the value inn-octane, since I was solubilized in the hydrocarbon atmosphere of the inner part of the surfactant micelle. At lower concentrations (below the CMC), however, I was present in the water phase and λ_max approached the value in water. The curve of λ_max vs. surfactant concentration declined from the high concentration values as the CMC was approached and at the CMC, the curve broke upward sharply. Then, it rose for some time and approached the value in water. N,N′-diethylaniline was used because it exhibited larger shifts of λ_max. The standard amount used was 0.002 ml/3–10 ml of aqueous solution of the surfactant. The CMC values obtained agreed with those obtained by the electric conductivity method, dye adsorption method and light scattering method, for surfactants such as tetradecyldimethylbenzylammonium chloride, sodium dodecyl sulfate and polyoxyethylene cetyl ether.     

Experimental Study of CMC Evaluation in Single and Mixed Surfactant Systems, Using the UV–Vis Spectroscopic Method

In this study, the critical micellar concentration (CMC) of anionic, cationic and nonionic surfactants was determined using the UV–Vis spectroscopic method. Sodium lauryl sulfate (SDS) as anionic, hexadecyl-trimethyl-ammonium bromide as cationic, tert-octylphenol ethoxylates TOPEON (with N = 9.5, 7.5 and 35) and lauryl alcohol ethoxylate (23EO) as nonionic surfactants have been used. Concentration of surfactants varies both from below and above the CMC value in the pyrene solution. In addition, the amount of the CMC was determined using the values from the data obtained from the graph of absorbance versus concentration of surfactants. A comparative study was conducted between the results of the present study and the literature which shows a good agreement, in particular for TOPEO9.5 and LAEO23. Furthermore, the CMC value of SDS (as an ionic surfactant) in the presence of nonionic surfactants was also examined. The result reveals that with addition of small amount of nonionic surfactant to the anionic SDS surfactant, a decline in the CMC value of the anionic–nonionic system relative to the CMC of pure anionic surfactant was observed. In addition and for the first time, the effect of UV irradiation on the size of the micelle formations was studied. It was found that UV irradiation causes the formation of smaller micelles which is of prime concern in membrane technology.     

Colloid‐Enhanced Ultrafiltration of Chlorophenols in Wastewater: Part IV. Effect of Added Salt on the Surfactant Leakage in Surfactant Solutions and Surfactant–Polymer Mixtures

Abstract

The critical aggregation concentration (cac) in surfactant–polymer mixtures approximates a lower limit to the surfactant concentration in the permeate (surfactant leakage) in polyelectrolyte micellar‐enhanced ultrafiltration. Here, the cac was measured at different salinities by using surface tension measurements. It was found that the cac increases slightly with the addition of simple salt, then the cac value decreases at higher salt concentration. The critical micelle concentration (CMC), which approximates surfactant leakage in micellar systems (no polymer), decreases monotonically with increasing salinity for ionic surfactants. The surfactant leakage in colloid‐enhanced ultrafiltration (CEUF) processes is investigated by using a dialysis method in the presence of three phenolic solutes with various degrees of chlorination: 2‐monochlorophenol (MCP), 2,4‐dichlorophenol (DCP), and 2,4,6‐trichlorophenol (TCP). Cetylpyridinium chloride (CPC) or n‐hexadecylpyridinium chloride is used as a cationic surfactant; and sodium poly(styrenesulfonate) (PSS) is used as an anionic polyelectrolyte. The effect of salinity and type of colloid is focused on here. In the absence of added salt, the cac can be over an order of magnitude less than the CMC, as can be surfactant leakage with added polymer. The added salt reduces the surfactant leakage in the micellar solution due to CMC reduction in the presence of electrolyte. In the surfactant–polymer mixture, the surfactant leakage is dramatically affected by salinity.     

Surface and Aggregation Properties of Synthesized Cetyl Alcohol Based Bis-Sulfosuccinate Gemini Surfactants in Aqueous Solution

A series of cetyl alcohol based anionic bis‐sulfosuccinate gemini surfactants (BSGSCA1,4; BSGSCA1,6 and BSGSCA1,8) with different spacer lengths was prepared using dibromoalkanes. The surfactant structure was elucidated using elemental analysis, Fourier transform infrared spectroscopy (FT‐IR) and nuclear magnetic resonance spectroscopy (NMR). Surface tension measurements were used to determine the critical micelle concentration (CMC), the surface tension at the CMC (γ_CMC), surface pressure at the CMC (π_CMC) and efficiency of adsorption (pC20). On the basis of surface studies, the CMC and γ_CMC decreases with increasing length of the spacer group. The micelle aggregation number, determined by fluorescence quenching studies, increases with increasing surfactant concentration above the CMC. The micropolarity in the micelle increases with increasing length of the spacer and decreases with increasing surfactant concentration.     

Some Surface Properties of Polysorbates and Cetyl Trimethyl Ammonium Bromine Mixed Systems

Mixed surfactant solutions consisting of cationic/nonionic surfactants were prepared in different compositions of the components in aqueous solution in order to determine the surface properties. The critical micelle concentration (CMC) of aqueous solutions of the individual surfactants cetyl trimethyl ammonium bromide (CTAB) and polysorbate nonionics, and their mixtures are determined at different proportions. The results show that there is synergistic behavior in mixtures at higher mole fraction of nonionic surfactant. The effect of the alkyl chain on the CMC is also determined.     

温度及无机盐对LMEE和SDS混合溶液表面张力的影响

通过表面张力的测定,研究了温度和不同无机盐对月桂酸甲酯乙氧基化物(laurylmethylesterethoxylate,简称LMEE)与十二烷基硫酸钠(SDS)复配物表面张力及临界胶束浓度(CMC)的影响。研究表明:混合体系的CMC在很宽的复配比例内出现最低值,25℃、未加无机盐时可使CMC最低降至3 8×10-5mol/L;温度对复配体系表面张力的影响较小,温度上升复配物的CMC略有降低。3种价态无机盐的加入均可使复配物的CMC有所降低,但与单一表面活性剂相比,温度和无机盐对复配物的CMC影响均不大,说明复配体系的抗温变及抗盐能力均有增强。     

Structural and Physicochemical Properties of a Polymerizable Surfactant Synthesized from <Emphasis Type="Italic">N</Emphasis>-Methylol Acrylamide

A new polymerizable nonionic surfactant with reactive vinyl groups has been synthesized from N‐methylol acrylamide using a two‐step procedure. The structure of the surfactant molecule was characterized by Fourier transform infrared, ¹H nuclear magnetic resonance and mass spectroscopy. The surface active properties alongside its self‐assembly properties were investigated by surface tension, electrical conductivity, and fluorescence spectroscopy measurements. As compared with other nonionic surfactants, this study showed that this polymerizable surfactant possesses slightly a higher critical micelle concentration (CMC) value and the surface tension value at CMC. The obtained CMC values were compatible among measurements, ca. 0.02–0.038 M. The evidence of micelle formation also provided by the zeta potential measurements and the obtained zeta potential values showed that the polymerizable surfactant solutions had limited stability. The hydrolysis stability and solubility of the polymerizable surfactant were also investigated. The solubility results have shown that it was soluble in polar solvents while insoluble in nonpolar solvents both at room temperature and 40 °C. The acidic and basic hydrolysis of the surfactant increased as the temperature increased and the hydrolysis stability was 180 min (basic medium) and 55 min (acidic medium) at 80 °C.     

Alcohols Effect on Critic Micelle Concentration of Polysorbate 20 and Cetyl Trimethyl Ammonium Bromine Mixed Solutions

In this research, the micellar behavior of a cationic surfactant, cetyl trimethyl ammonium bromide (CTAB) and an nonionic surfactant, polysorbate 20 (Polyoxyethylene (20) sorbitan monolaurate) in different alcohol solutions media was investigated over the temperature range 293.15–313.15 K. The interaction between two surfactants in binary systems can be determined by calculating the values of their β parameters. The critical micelle concentrations (CMC) of the micelles were determined from the surface tension, the conductivity at different temperatures. The CMC behavior of CTAB and polysorbate 20 was analyzed in terms of the effect of temperature and the increase in the alcohol carbon chain. Changes in the critical micelle concentration of mixed surfactant systems of different alcohol solutions were measured. The CMC decreased sharply as the hydrocarbon chain length of the alcohols becomes larger. This shows that the more hydrophobic alcohols are, the more marked a decrease in CMC is observed.     

Characterizations of surfactant synthesized from Jatropha oil and its application in enhanced oil recovery

Surfactants are frequently used in chemical enhanced oil recovery (EOR) as it reduces the interfacial tension (IFT) to an ultra‐low value and also alter the wettability of oil‐wet rock, which are important mechanisms for EOR. However, most of the commercial surfactants used in chemical EOR are very expensive. In view of that an attempt has been made to synthesis an anionic surfactant from non‐edible Jatropha oil for its application in EOR. Synthesized surfactant was characterized by FTIR, NMR, dynamic light scattering, thermogravimeter analyser, FESEM, and EDX analysis. Thermal degradability study of the surfactant shows no significant loss till the conventional reservoir temperature. The ability of the surfactant for its use in chemical EOR has been tested by measuring its physicochemical properties, viz., reduction of surface tension, IFT and wettability alteration. The surfactant solution shows a surface tension value of 31.6 mN/m at its critical micelle concentration (CMC). An ultra‐low IFT of 0.0917 mN/m is obtained at CMC of surfactant solution, which is further reduced to 0.00108 mN/m at optimum salinity. The synthesized surfactant alters the oil‐wet quartz surface to water‐wet which favors enhanced recovery of oil. Flooding experiments were conducted with surfactant slugs with different concentrations. Encouraging results with additional recovery more than 25% of original oil in place above the conventional water flooding have been observed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 2731–2741, 2017     

Properties of aqueous solution of a fluorocarbon surfactant and a nonionic surfactant,and their mixtures

The surface tensions of aqueous solutions of lithium perfluorooctane sulfonate (LiFOS) and hexaethyleneglycoln-dodecylether (6ED), and of their mixtures, were measured. The effect of each surfactant additives on the adsorption and the micelle formation was discussed on the basis of the surface tension values using the Langmuir adsorption equation for the mixture of both surfactants and the modified Szyszkowski equation. From these results, in the range of low concentrations of 6ED or LiFOS, some of the 6ED molecules which had already adsorbed on the solution surface were found to be replaced by LiFOS molecules in an addition of LiFOS surfactant and vice-versa. In the ranges of higher concentration above critical micelle concentration (CMC) of each surfactant, it was concluded that the mixed micelle could be formed in the mixed system of both surfactants as well as in the mixed system of two kinds of ordinary hydrocarbon surfactants.     

Influence of Nonionic Surfactant on Hydrolysis of Vinyl Sulfone Reactive Dye

Nonionic surfactants are widely used in reactive dyeing processes, and the interaction between surfactants and reactive dyes affect the hydrolytic property of reactive dyes. In this study, reactive brilliant blue KN‐R (C.I. reactive blue 19) was employed as a model dye, and fatty alcohol polyoxyethylene ether (AEO‐9) was selected as a model nonionic surfactant. The interaction was first investigated in aqueous solutions by a UV‐spectrophotometry method, then the effect of surfactant concentration on the hydrolytic behavior of KN‐R was studied using high performance liquid chromatography method. Below the critical micelle concentration, the surfactant served as dispersant; the hydrolysis of reactive dye was accelerated. However, when the concentration of surfactant was above its critical micelle concentration, the dye was solubilized into the micellar phase, which was revealed from the changes in absorbance intensity and wavelength of the maximum absorbance. This led to slowed hydrolysis of reactive dye. These findings are useful in understanding the effect of concentration of nonionic surfactant on the hydrolysis of vinyl sulfone reactive dyes.     

Interaction of Azo Dye with Cationic Surfactant Under Different pH Conditions

The aggregation induced by Alizarin Yellow R (AYR) in the cationic surfactant, cetyltrimethylammonium bromide (CTAB), was investigated by measuring their UV–visible absorption spectra. Conductance measurements as a function of surfactant concentration below and above the critical micelle concentration (CMC) were studied. CTAB aggregation takes place at the concentration far below its normal CMC in the presence of AYR. Both hydrophobic and electrostatic interactions affect the aggregation process in aqueous solution. The dye effect on the CMC of CTAB was noted by a specific conductivity method as well. AYR–CTAB binding constant (K_s) and water–micelle partition co-efficient (K_x) were quantified with the help of mathematical models employed to determine the partitioning of organic additives in the micellar phase. The number of dye molecules per micelle was estimated at particular CTAB concentrations above CMC, during this study.     

The Application of Ozone in the Decomposition of Aqueous Solutions of Nonionic Surfactants

Aqueous solutions of nonionic surfactants are decomposed by ozone. In the experiments compounds differing in chemical structure (i.e., the presence of a benzene ring in the molecule, the type of aliphatic chain [linear or branched] and the length of the polyoxyethylene chain) were used. The research was conducted using solutions of Triton, Tergitol, Symperonic, and Brij surfactants produced by Fluka Chemie Ag. The initial concentrations were chosen to be over and below a critical micelle concentration (CMC). Decomposition was analyzed by polarography, spectrophotometry, total organic carbon (TOC) and chemical oxygen demand (COD) value. It was found that the rate and effectiveness of ozonation depended on the chemical structure of surfactant molecule, chain structure (linear or branched), oxyethylene chain lengthening, and a monomeric or micelle form of the surfactant molecule appearing in the solution.     

Synthesis and Properties of Quaternary Ammonium Surfactants Based on Alkylamine,Propylene Oxide,and 2‐Chloroethanol

New quaternary ammonium salts are synthesized by octylamine, nonylamine, dodecylamine, and hexadecylamine reacting with propylene oxide at a mole ratio of 1:2, followed by reaction with 2‐chloroethanol. By tensiometric measurements of aqueous solutions, their surface activity has been determined. Using the results of these measurements and electroconductometric studies, important parameters such as critical micelle concentration (CMC), efficiency of surfactant adsorption, surface pressure at the CMC, changes of Gibbs free energies for micelle formation, and adsorption were estimated. By application of the Gibbs adsorption isotherm, indices such as maximum surface excess concentration and minimum surface area/molecule at the air–water interface were also calculated. Petroleum‐collecting properties of these surfactants were investigated. Among these quaternary ammonium surfactants, the surfactant based on dodecylamine, propylene oxide, and 2‐chloroethanol exhibits the highest petroleum‐collecting capacity.     

表面活性剂对气体水合物生成过程的定量影响

为确定HCFC?141b水合物生成条件下阴离子表面活性剂十二烷基硫酸钠(SDS)和十二烷基苯磺酸钠(SDBS)的临界胶束浓度(CMC),在0~20℃温度下,通过圆环法实验研究了不同浓度表面活性剂溶液体系的表面张力,考察了表面活性剂对溶液体系表面张力的影响机理并通过C3H8水合物的生成过程实验进行了验证,确定了SDS和SDBS的临界胶束浓度. 结果表明,当SDS和SDBS的质量浓度分别低于500?10?6和100?10?6时,表面活性剂降低水表面张力的效果最明显,二者的CMC分别为1950?10?6和400?10?6,表面活性剂能明显缩短水合反应的诱导时间,提高了其平均生成速率.     

Selection of surfactant pairs for optimization of interfacial properties

Guidelines are provided for the selection of surfactant pairs when synergism in various interfacial properties in aqueous media is desired. To maximize the reduction of the critical micelle concentration, the two surfactants should show strong attractive interaction in the mixed micelle; in order to maximize efficiency in surface tension reduction, strong interaction in the mixed monolayer at the aqueous solution/air interface (large negativeβ values is needed). The more surface-active material should predominate in the mixture. When interaction is not strong, the two surface-active materials used should have approximately equal surface activities and should be used at equimolar concentration in the aqueous phase. To minimize the surface tension (γ) of the solution, the surfactant-surfactant attractive interaction in the mixed monolayer at the aqueous solution/air interface must exceed that in the mixed micelle. Optimization can be achieved by using two surfactants with approximately equal γ values at their respective critical micelle concentrations (CMC’s). When these γ values are not equal, the surfactant with the higher γ value at its CMC should have the smaller area/molecule at the surface. The greater the difference between attractive interaction at the interface and in the micelle, the lower the value of the surface tension.     

荧光探针法研究新型Gemini表面活性剂在水溶液中的聚集行为

以芘为荧光探针、二苯酮为猝灭剂,用稳态荧光探针法测定了新型Gemini表面活性剂的临界胶团浓度(CMC)、胶团聚集数(Nagg)及胶团微极性.研究了Gemini表面活性剂结构和氯化钠浓度对CMC、Nagg、胶团微极性的影响.结果表明,新型Gemini表面活性剂的CMC比常规表面活性剂的CMC低1—2个数量级.当疏水基碳原子数增加时,CMC依次降低,Nagg增大,胶团微极性减小.当氯化钠浓度增大时,Nagg增大,胶团微极性减小.