光纤链路环网保护技术在SDH光传输网络中的应用

文章提出了一种实现光纤链路环网保护技术的解决方案,详细介绍了该方案的技术原理和实现方法,最后对该技术进行了测试论证,论证结果表明该技术方案是可行的。     

DCC开销交叉技术在光传输网络中的应用

提出了一种利用DCC开销交叉技术建立DCC的解决方案,介绍了该方案的技术原理和实现途径,最后对该技术进行了测试验证,试验结果表明该技术方案是正确可行的。     

SOPC技术在光传输网络中的应用

提出了一种基于片上可编程系统(System on a Programmable Chip,SOPC)技术在光传输网络中的应用方案,介绍了该方案的技术原理和实现方式.最后,对该应用方案进行了测试验证,试验结果表明该方案是可行的.     

网络工程信息安全管理技术优化研究

网络工程信息安全管理中的一个重要环节是制定安全的信息管理技术方案,以此来使脆弱性对系统的影响降低。本文以信息管理技术方案优化制定为基础,采用遗传算法对网络工程信息安全管理技术进行了优化,首先对信息管理技术方案的决策模型进行了介绍,之后将遗传算法应用于信息管理技术方案的制定中,最后以实际算理对该优化技术的有效性进行了验证。结果表明采用该优化技术可以极大的降低脆弱性对系统的影响,同时实施该技术所需的实际费用较少,对网络工程信息安全管理的优化效果较为明显。     

可供话音加密的选择方案

本文探讨了两种可供话音加密的选择方案。第一种方案属于模拟技术,除了引入滑动窗的概念以外,该技术还应用了时间单元置乱原理。可以看出,该技术在增加对用户有效的置乱排列数的同时,能够缩短系统时延。第二种方案采用序列加密的数字技术。还讨论了对该系统的一些要求。最后,作者从保密的观点出发力图说明这两种方案在现有技术中的适用范围。     

基于 RLWE 的全同态加密方案简

基于Kristin Lauter等人的somewhat同态方案,提出“带密钥转换的重线性化技术”。结合该技术与“模转换”,设计了一个基于RLWE的非自举的层次化全同态加密方案。该方案的同态操作简单,而且给出的平凡门操作使得电路层结构更清晰。最后利用自举技术作为优化提升了方案的同态运算能力。     

以环网＋EPON实现乡镇网络改造

主要介绍烟台市福山区利用1550 nm光技术与设备对乡镇有线电视网络实施改造的技术方案,该方案详细设计了广播与数据两级光缆环网,同时还设计了3级星树型网络,用于电视广播与数据业务的EPON接入,目前该方案正在实施中.     

基于WiMAX技术的校园网络平台设计与实现

提出了一种适用于校园无线网络的解决方案,该方案根据无线传感器网络技术特点,将CC1110无线传感器模块与WiMAX宽带无线接入技术作为校园无线网接入的策略,针对其技术可行性、方案可实施性,校园全局网络的具体建设等进行了分析和设计,并且通过实地测试证明了该方案的性能更加优越。     

基于RFID技术的物品跟踪识别方案研究

在分析研究RFID技术的基础上,构建一个基于RFID技术的物品跟踪识别定位方案,并对该方案的实现方法以及所需的一些设备进行了说明。该方案具有广阔的应用范围,尤其适合制造业及零售业等方面的物流管理。     

LTE系统中自适应调制编码技术的研究

根据标准研究了LTE系统的自适应调制编码技术,并针对该系统提出了自适应调制编码技术的实现方案。在LTE系统环境下仿真了提出的实现方案的性能,结果表明：无论在高信噪比还是在低信噪比条件下,自适应技术均比单一的编码调制方案吞吐量有明显的提升,该自适应实现方案在保证一定的通信可靠性的前提下,能够更有效地利用频谱资源和提高系统吞吐量。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.