Correlation between the compositional and pasting properties of various potato starches

Multiple linear regression equations were used to develop the correlation between the compositional and rapid visco-analysis (RVA) pasting properties of various potato starches. The amylose of potato starches had a negative correlation with the peak viscosity (PV) and breakdown (BD) and a positive correlation with the setback viscosity (SV) and peak viscosity temperature (PVT). By contrast, phosphorus had a positive correlation with PV, BD, and SV and a negative correlation with PVT. In addition, the median granule size had a positive correlation with PV and BD. By contrast, a negative correlation of the median granule size was observed with SV and PVT. The correlation coefficients of amylose–phosphorus, amylose–granule size, and phosphorus–granule size interactions indicated that amylose had more influence than had phosphorus or had the median granule size on PV and BD. Furthermore, amylose had a greater influence than had the granule size on SV and PVT. Similarly, amylose had more influence than had phosphorus or had the median granule size on PVT. However, the correlation developed in this study was useful for predicting the influence of a specific component and the compositional interaction on the RVA pasting properties.     

Pasting and Thermal Properties of Potato and Bean Starches

Starches from potato (Mainechip, ND651-9 and Commercial) and Navy and Pinto bean were isolated and the pasting and thermal properties examined. Analysis by Rapid Visco-Analyzer (RVA) showed potato starches had lower pasting temperatures, higher peak viscosity, and lower setback than bean starches. High intrinsic viscosity values obtained for the potato starch indicated higher average molecular weight for the potato starches compared to the bean starches. Characterization of thermal (gelatinization and retrogradation) properties of starches by Differential Scanning Calorimetry (DSC) showed that potato starches had sharp, well-defined gelatinization thermograms, while bean starches had broad, shallow thermograms with higher peak temperature (Tp). Potato starches required higher gelatinization enthalpies than bean starches. In comparison with gelatinization, the retrogradation thermograms of starches stored at three different temperatures (23,4 and −10°C) were broader and occurred at the lower temperatures. Compared to potato starches, Navy and pinto bean starches showed a higher retrogradation enthalpy at 4 and 23°C storage temperatures, but a lower enthalpy at −10°C.     

Physicochemical,Pasting, Thermal and Morphological Characteristics of Indian Water Chestnut (Trapa natans) Starch

Starch extracted from Indian water chestnut was investigated for its physicochemical characteristics. The results were compared with those obtained from two commercial starches (corn and potato). The pasting properties were tested in the Rapid Visco Analyser and thermal properties with a differential scanning calorimeter. Water chestnut starch possessed higher breakdown viscosity (BV) and setback viscosity (SV) than corn and potato starches. However, the pasting temperature of water chestnut starch was not significantly different from that of corn starch. Lower ΔH_gel values were obtained for water chestnut starch than for the other two starches whereas the onset, peak and conclusion temperatures of gelatinization (T_o, T_p and T_c) for water chestnut starch were quite comparable with corn starch. Scanning electron micrographs showed similarity in starch granule shape between water chestnut and potato starch with corn starch showing surface wrinkles on starch granule surfaces.     

RVA study of mixtures of wheat flour and potato starches with different phosphorus contents

A rapid visco analysis (RVA) system was used to study the pasting properties of mixtures of wheat flour and potato starches with high phosphorus (HPS), medium phosphorus (MPS) and low phosphorus (LPS) contents, different granule sizes and different amylose contents. The peak viscosities, trough and breakdown, final viscosities, setback viscosities and peak times of control potato starches were found to be higher than those of wheat flour. The peak viscosities were increased significantly with increase of potato starches in the mixtures. Thus, the peak times decreased with increase of potato starch in the mixtures. The breakdown viscosities increased significantly with increase of potato starches in the mixtures and the values were found to be higher in HPS-wheat, followed by MPS-wheat and LPS-wheat mixtures. The final viscosities of HPS-wheat mixtures were highest, followed by MPS-wheat and LPS-wheat mixtures. The setback viscosities of LPS-wheat were significantly higher than those of MPS-wheat and HPS-wheat mixtures at 30 to 50% potato.     

The effect of electrostatic interactions on pasting properties of potato starch/xanthan gum combinations

The effects of electrostatic interactions on pasting properties of potato starch (PS)/xanthan gum (XG) combinations were investigated. The RVA peak viscosity of combinations was decreased firstly and then increased with the adding of XG. The analysis and regression model performance of RVA measurement showed that there was the relationship between pasting properties of combinations and XG concentrations. Electrostatic repulsions between native potato starch or anionic modified potato starches (AP) and XG could be present by decreasing peak viscosity, but the pasting temperatures showed increasing trend. However, electrostatic attractions between cationic modified potato starch (CP) and XG showed the opposite effect. Negative zeta potential determination for combinations (− 54.6 mv) was higher than PS (− 35.2 mv) illustrated that combinations had more electronegativity and stability, in addition a phase-separated microstructure was exhibited in the combinations determined by Zeta potential results. SEM micrographs presented that XG film attached to the surface of PS granules, which inhibited the starch granules destruction and leaching of amylase. The electrostatic repulsion leaded to more stability of the three dimensional network structures of combinations. The strong electrostatic interactions between PS and XG were found to play an important role on the pasting properties of the combinations.     

Effects of annual fluctuation of environmental factors on starch properties in potato tuber development

To test the effects of the annual fluctuation of the environmental factors on the starch properties in potato tuber development, starches were isolated from potato cultivars grown for ten consecutive years (2001–2010) on the experimental farm in Memuro, Hokkaido, the northernmost island of Japan. The median granule size, phosphorus content, and rapid visco‐analyzer pasting properties, peak viscosity, breakdown, and pasting temperature of these starches were analyzed. Daily temperature and precipitation records in Memuro were obtained from the Japan Meteorological Agency. Moreover, the correlation coefficients of yearly accumulated temperature and precipitation from flowering to harvesting with all the starch quality parameters were calculated. No relationships of accumulated temperature with median granule size, peak viscosity, and breakdown were found. The low phosphorus content was slightly associated with the high accumulated temperature. The pasting temperature was significantly and positively correlated with the accumulated temperature, suggesting that the pasting temperature strongly responds to the environmental temperature during potato tuber development. In contrast, all the starch quality parameters were almost irrespective of the precipitation during potato tuber development.     

Effect of Potato Starch Properties on Instant Noodle Quality in Wheat Flour and Potato Starch Blends

The properties of potato starch and their effect on the quality of Chinese‐style alkaline instant noodles made from wheat flour and potato starch blends were investigated. Starches were extracted from nine potato cultivars, and the phosphorus content of these starches was analyzed together with the median granule size and pasting and gelatinization properties. Instant noodles were manufactured using mixtures of wheat flour and these potato starches. A Rheoner instrument was used to evaluate three textural parameters, namely, the breaking force (BF), breaking energy (BE), and ratio of the breaking force to the breaking deformation (BF/BD), of instant noodles cooked by immersing into boiling water for 3 and 7 min. The phosphorus content, peak viscosity, and breakdown were significantly and positively correlated with the BF of the noodles cooked for 3 min and did not significantly correlate with that of those cooked for 7 min. Other quality parameters of potato starch did not affect the BF significantly. Other textural parameters of instant noodle quality, such as the BE and BF/BD, did not significantly correlate with any of the quality parameters of potato starch. The findings obtained with the use of wheat flour and potato starch blends suggest that phosphate, which is thought to enhance starch viscosity of potato starch, is important for making instant noodles with favorable texture in hardness.     

不同植物来源淀粉之间的理化性质的比较

本研究比较了绿豆淀粉、马铃薯淀粉、红薯淀粉、大米淀粉及玉米淀粉的理化性质,结果如下：绿豆淀粉具有最高的直链淀粉渗滤和胶凝值,并且这两个指标均与表观和总直链淀粉含量呈高度的相关关系。尽管绿豆淀粉具有最高的直链淀粉含量,但它并不显示出热糊稳定性。红薯淀粉在加热过程中具有高的膨润力和峰值黏度、高的崩溃值以及低的离水率,这表明红薯淀粉颗粒在加热时能够自由膨胀,糊的热稳定性差,淀粉的老化速率较低,而大米淀粉则与红薯淀粉相反。五种淀粉具有不同的胶稠度,马铃薯淀粉最高,而大米淀粉最低。离水率与直链淀粉含量不呈现明显的相关关系,因此其值的大小可能受其他因素的影响。     

Isolation,composition, morphological and pasting properties of starches from rice cultivars grown in Nigeria

The isolation, composition, morphology and pasting properties of rice starches from different rice cultivars (N2R, Nerica II rice; IGR, Igbemo rice; ILR, Ilaje rice; and EAR, Efon Alaye rice) were studied. The starches were isolated from their flours by using a modified deproteination method in 0.1% NaOH. The highest starch yield of 65% was obtained from EAR with a residual protein of 0.41% and lowest starch yield of 45.70% from IGR with a residual protein of 0.42%. The AAM concentration of rice starches ranged from 21.88 to 26.04%. The sizes of the starch granules obtained from SEM were between 3 and 8 µm, some of the granules were individual (single) while others were fused (compound granules). The starch granules were small, polygonal and irregular in shape. The pasting parameters were evaluated using rapid visco analyser (RVA). Significant differences were observed in individual pasting parameters such as peak viscosity (PV), breakdown viscosity (BV), final viscosity (FV) and setback viscosity (SV). Cooked ILR starch had the highest PV (279.69 RVU; rapid viscosity units) and BV (52.50 RVU) when compared to the other starches. In contrast, N2R showed the highest FV (329.92 RVU) and SV (102.50 RVU), the latter due to the high concentration of AAM. The results revealed that cultivar has an effect on composition and pasting properties of rice starch.     

羟丙基和磷酸酯化对不同玉米杂交种淀粉糊化特性的影响

采用了实验室方法提取了高直链、糯性和普通玉米杂交种的淀粉，并分别进行了羟丙基化和磷酸酯化反应。采用快速粘度分析仪（RVA）和差示扫描量热仪（DSC）分别分析了淀粉的糊化和热力学性质。结果表明：羟丙基化和磷酸酯化反应都不同程度地降低了所有淀粉的热焓值和糊化温度，缩短了出峰时间，增加了峰值粘度。二者相比，羟丙基化更显著地降低了原淀粉的糊化温度和热焓值，缩短了出峰时间；而磷酸酯化则更明显地提高了原淀粉的峰值粘度和终粘度．     

Physicochemical, pasting and thermal properties of tuber starches as modified by guar gum and locust bean gum

This study was carried out in order to compare the functional characteristics of isolated starch from five tuber crops, yam, taro, sweet potato, yam bean and potato, as well as effect of guar gum (GG) and locust bean gum (LBG) on pasting and thermal properties of tuber starches. The results showed that total amylose content of five tested starches ranged from 17.85% to 30.36%. The results of pasting behaviour showed that potato starches exhibited the highest peak viscosity and yam starch presented a stable curve with little breakdown viscosity. Addition of GG and LBG resulted in a significant increase in peak, final viscosity, breakdown and setback viscosity for all tuber starches ( P  < 0.05), but a slight decrease in pasting temperature. The gelatinisation enthalpy (Δ H ) for starches with GG and LBG was slightly lower than those of the starches alone in yam and sweet potato, but not in taro and yam bean.     

Physico‐chemical characterization of starches extracted from potatoes of the group Phureja

Starch was extracted from twenty‐four accessions of Group Phureja cultivated diploid potatoes, and from two commercial potato (Solanum tuberosum) varieties. Extracted starch samples were characterized and compared to industrial potato starch. Starch from Phureja generally exhibited smaller granule sizes and lower phosphorus content than starch from commercial potatoes. Amylose content and thermal properties (gelatinization temperature and enthalpy) were however in the same range for both groups. Starches from Phureja displayed very distinct pasting behavior from that of commercial potato. The former exhibited lower initial pasting viscosity but higher shear resistance. This may be related to lower starch granule size, causing lower swelling power and solubility. Iodine complexation results seem to indicate that phureja potatoes have higher proportion of amylopectin long chains. Phureja thus appears to be a promising new source of starch with specific physico‐chemical and functional properties intermediate between industrial potato and cereal starches.     

不同品种小麦淀粉提取及糊化粘度性质比较

采用实验室方法提取30种不同小麦籽粒淀粉;并用快速粘度分析仪(RVA)测定不同品种小麦淀粉糊化粘度性质,分析各粘度性质相关性及差异性。结果表明:普通小麦淀粉糊化粘度性质参数明显不同,粘度性质参数差异性显著,各参数间相关性极显著。     

Thermal,rheological, and mechanical properties of normal corn and potato starch blends

Native corn and potato starches were mixed in different proportions. Blends presented similar values to potato starch at onset temperature and at ending temperature to corn starch. CS20PS80 blend had the highest values for hardness between blends due to the formation of a three-dimensional network with corn starch granules that act as composite material. Some blends exhibited higher recovery viscosity than native starches, possibly due to interactions. Gelatinization temperature, swelling power, phosphorous content, granule size, and x-ray pattern played an important role in the resulting properties, however, the amylose content did not show influence due to both starches having a similar content.     

普通玉米杂交种间原淀粉与羟丙基淀粉糊化性质关系的研究

本文采用湿法在实验室的条件下提取了17种普通玉米杂交种淀粉，并制取了羟丙基淀粉。采用快速粘度测定仪（RVA）测定了所有淀粉的糊化性质参数。结果表明：羟丙基淀粉提高了所有原淀粉的峰值和破损值；降低了所有原淀粉的谷值、终粘度、回生值、出峰时间和成糊温度；原淀粉和羟丙基淀粉的糊化性质参数在普通玉米杂交种间均达到了极显著相关水平，表明了羟丙基淀粉并没有改变原淀粉在普通玉米杂交种间的糊化性质差异性。羟丙基淀粉的糊化性质参数间的相关性显著水平发生了明显的变化，表明了不同的普通玉米杂交种的羟丙基淀粉的糊化性质参数的变化幅度是不同的。但是，羟丙基和原淀粉的相同糊化性质参数间的相关性都达到极显著的正相关水平，说明了羟丙基淀粉与原淀粉的糊化性质参数间存在密切关系，二者的糊化性质又存在着一致性。     

微波对马铃薯淀粉性质的影响

研究微波辐射前后马铃薯淀粉物化性质的变化。采用微波对30%水分含量的马铃薯淀粉进行处理。结果表明:微波淀粉颗粒表面出现凹坑,降低了膨胀度和溶解度、冻溶稳定性。主要X-射线衍射峰的强度增大,晶型由B型转为A型,马铃薯淀粉经处理后糊化起始温度升高、粘度降低,粘度曲线由A型变为C型。试验表:在淀粉颗粒内无定形区和结晶区的直链淀粉与直链淀粉、直链淀粉与支链淀粉发生交互作用,微波处理使淀粉分子发生一定程度的降解。     

Microstructural and physicochemical properties of heat-moisture treated waxy and normal starches

Starches from normal rice (21.72% amylose), waxy rice (1.64% amylose), normal corn (25.19% amylose), waxy corn (2.06% amylose), normal potato (28.97% amylose) and waxy potato (3.92% amylose) were heat-treated at 100 °C for 16 h at a moisture content of 25%. The effect of heat-moisture treatment (HMT) on morphology, structure, and physicochemical properties of those starches was investigated. The HMT did not change the size, shape, and surface characteristics of corn and potato starch granules, while surface change/partial gelatinization was found on the granules of rice starches. The X-ray diffraction pattern of normal and waxy potato starches was shifted from B- to C-type by HMT. The crystallinity of the starch samples, except waxy potato starch decreased on HMT. The viscosity profiles changed significantly with HMT. The treated starches, except the waxy potato starch, had higher pasting temperature and lower viscosity. The differences in viscosity values before and after HMT were more pronounced in normal starches than in waxy starches, whereas changes in the pasting temperature showed the reverse (waxy > normal). Shifts of the gelatinization temperature to higher values and gelatinization enthalpy to lower values as well as biphasic endotherms were found in treated starches. HMT increased enzyme digestibility of treated starches (except waxy corn starch); i.e., rapidly and slowly digestible starches increased, but resistant starch decreased. Although there was no absolute consistency on the data obtained from the three pairs of waxy and normal starches, in most cases the effects of HMT on normal starches were more pronounced than the corresponding waxy starches.     

Gelatinization Profiles of Peruvian Carrot,Cocoyam and Potato Starches as Measured with the Brabender Viscoamylograph,Rapid Visco-Analyzer,and Differential Scanning Calorimeter

The high starch content of underground storage organs of the tropical plants Peruvian carrot (A. xanthorrhiza B.) and cocoyam (X. sagittifolium) are an unexploited source of food and industrial starches. Some of their functional properties were determined using the Brabender Viscoamylograph (BV), Rapid Visco-Analyzer (RVA) and Differential Scanning Calorimeter (DSC). BV and RVA pasting properties compared well for all three starches; gelatinization temperature ranges determined by DSC were lower than their BV and RVA counterparts. All starches formed clear pastes. The lower viscosities of Peruvian carrot and cocoyam pastes than that of potato starch suggest they might have applications in food systems requiring clarity at high solids concentrations.     

Use of the Rapid-Visco-Analyzer to Measure Starch Pasting Properties. Part I: Effect of Sugars

The Rapid Visco-Analyzer (RVA) was used to measure the effects of dextrose, sucrose, corn syrup solids and polydextrose on maize, tapioca and wheat starch pasting properties. The addition of 1 part sugar: 1 part starch tended to decrease peak viscosity, whereas peak viscosity increased at higher sugar concentrations (up to 4 parts sugar: 1 part starch). Time to onset of viscosity increase and time to peak viscosity increased as sugar concentrations increased. Dextrose, sucrose and corn syrup solids increased the maximum setback viscosity, of the starches, but polydextrose reduced setback viscosity. As the molecular weights of the sugars increased, the effects generally increased for maize and tapioca starches but not for wheat starch. Pasting property parameters measured in the RVA concurred with data obtained using other viscometers or by other techniques previously reported. The RVA is useful as an alternative tool for studying starch pasting properties and the effects of food ingredients on starch performance.     

响应面法优化琥珀酸淀粉酯制备条件的研究

采用水相体系法制取琥珀酸马铃薯淀粉酯,通过响应面组合设计分析了酯化温度、反应时间、琥珀酸添加量、反应pH值对取代度的影响。试验结果表明:琥珀酸添加量对取代度的影响最大,而上述四因素存在一定的交互作用。通过快速粘度分析仪(RVA)进行粘度测定,发现酯化后淀粉的糊化温度较原淀粉低,热浆粘度和最终粘度都有明显的提高。