Evaluation of distributed building thermal energy storage in conjunction with wind and solar electric power generation

Energy storage is often seen as necessary for the electric utility systems with large amounts of solar or wind power generation to compensate for the inability to schedule these facilities to match power demand. This study looks at the potential to use building thermal energy storage as a load shifting technology rather than traditional electric energy storage. Analyses are conducted using hourly electric load, temperature, wind speed, and solar radiation data for a 5-state central U.S. region in conjunction with simple computer simulations and economic models to evaluate the economic benefit of distributed building thermal energy storage (TES). The value of the TES is investigated as wind and solar power generation penetration increases. In addition, building side and smart grid enabled utility side storage management strategies are explored and compared. For a relative point of comparison, batteries are simulated and compared to TES. It is found that cooling TES value remains approximately constant as wind penetration increases, but generally decreases with increasing solar penetration. It is also clearly shown that the storage management strategy is vitally important to the economic value of TES; utility side operating methods perform with at least 75% greater value as compared to building side management strategies. In addition, TES compares fairly well against batteries, obtaining nearly 90% of the battery value in the base case; this result is significant considering TES can only impact building thermal loads, whereas batteries can impact any electrical load. Surprisingly, the value of energy storage does not increase substantially with increased wind and solar penetration and in some cases it decreases. This result is true for both TES and batteries and suggests that the tie between load shifting energy storage and renewable electric power generation may not be nearly as strong as typically thought.     

Performance assessment of a solar hydrogen and electricity production plant using high temperature PEM electrolyzer and energy storage

This paper investigates the performance of a high temperature Polymer Electrolyte Membrane (PEM) electrolyzer integrated with concentrating solar power (CSP) plant and thermal energy storage (TES) to produce hydrogen and electricity, concurrently. A finite-time-thermodynamic analysis is conducted to evaluate the performance of a PEM system integrated with a Rankine cycle based on the concept of exergy. The effects of solar intensity, electrolyzer current density and working temperature on the performance of the overall system are identified. A TES subsystem is utilized to facilitate continuous generation of hydrogen and electricity. The hydrogen and electricity generation efficiency and the exergy efficiency of the integrated system are 20.1% and 41.25%, respectively. When TES system supplies the required energy, the overall energy and exergy efficiencies decrease to 23.1% and 45%, respectively. The integration of PEM electrolyzer enhances the exergy efficiency of the Rankine cycle, considerably. However, it causes almost 5% exergy destruction in the integrated system due to conversion of electrical energy to hydrogen energy. Also, it is concluded that increase of working pressure and membrane thickness leads to higher cell voltage and lower electrolyzer efficiency. The results indicate that the integrated system is a promising technology to enhance the performance of concentrating solar power plants.     

Analysing the benefits of hybridisation and storage in a hybrid solar gas turbine plant

ABSTRACT

A dynamic model of a tower-driven, hybrid solar gas turbine power plant is presented to highlight the benefits of hybrid operation as well as the development a novel plant configuration to improve solar fraction by leveraging a packed-bed thermal energy storage (TES). Relative to solar-only plant, hybridisation increases solar-to-electric efficiency (STE) by 30%. Introduction of a passive packed-bed TES only leads to slight improvement in solar energy utilisation and displacement of solar load. A novel plant configuration, which utilises a recycle stream to charge TES, is presented to improve solar energy utilisation. The recycle stream gives freedom to manipulate the thermal capacity of flow in the tower collector to control collector exit temperature and direct excess solar energy to TES. Employment of the proposed plant configuration leads to a 10.8% and 11.3% improvement in yearly STE and solar fraction, respectively, relative to a plant not utilising such a control scheme.     

Turbine inlet cooling with thermal energy storage

Turbine inlet cooling (TIC) is a common technology used to increase combustion turbine power output and efficiency. The use of mechanical or absorption chillers for TIC allows for more air cooling than evaporative methods and also imposes a significant parasitic load to the turbine. Thermal energy storage (TES) can be used to shift this load to off‐peak hours. Use of thermal storage increases the flexibility of turbine power output, which benefits from the application of optimization tools. This paper explores the effect of combining TIC with TES to enhance the performance of a district cooling system that includes a gas turbine for power generation. The work illustrates how the system's performance can be enhanced using optimization. Application of multi‐period optimization to the system that includes TES brings significant operational cost savings when compared with a system without thermal storage. It is also shown how TES provides demand‐side energy management in the district cooling loop and supply‐side management through the use of TIC. In addition to the optimization study, a thorough literature review is included that describes the current body of work on combining TIC with TES. Copyright © 2013 John Wiley & Sons, Ltd.     

Advances in thermal energy storage development at the German Aerospace Center(DLR)

Thermal energy storage(TES)is a key technology for renewable energy utilization and the improvement of the energy efficiency of heat processes.Sectors include industrial process heat and conventional and renewable power generation.TES systems correct the mismatch between supply and demand of thermal energy.In the medium to high temperature range(100~1000℃),only limited storage technology is commercially available and a strong effort is needed to develop a range of storage technologies which are efficient and economical for the very specific requirements of the different application sectors.At the DLR's Institute of Technical Thermodynamics,the complete spectrum of high temperature storage technologies,from various types of sensible over latent heat to thermochemical heat storages are being developed.Different concepts are proposed depending on the heat transfer fluid(synthetic oil,water/steam,molten salt,air)and the required temperature range.The aim is the development of cost effective,efficient and reliable thermal storage systems.Research focuses on characterization of storage materials,enhancement of internal heat transfer,design of innovative storage concepts and modelling of storage components and systems.Demonstration of the storage technology takes place from laboratory scale to field testing(5 kW^1 MW).The paper gives an overview on DLR's current developments.     

Using demolition wastes from urban regeneration as sensible thermal energy storage material

Efficient use of solar energy in industrial applications calls for a cost‐effective thermal energy storage (TES) system. Packed bed is a viable technology for high‐temperature TES applications. The packing material acting as the TES material has to be sustainable with favorable thermal properties and compatible with the heat transfer fluid. Demolition wastes—leftovers from urban regeneration projects—in many countries are a big burden economically and environmentally. This paper aims to investigate the potential of using demolition wastes as sensible thermal energy storage (STES) material in packed bed column for industrial solar applications below 300°C. STES material samples have been prepared using binding additives with demolition waste dust. Chemical composition, mechanical strength, and thermal analysis tests have been carried out to determine suitability of STES samples. The DSC results showed that new STES samples had average specific heat capacity of 1000 to 1460 J/kg C in temperature range of 100°C to 500°C. The samples were thermally stable until 750°C under TGA analysis. These results showed that demolition wastes are potential low‐cost sensible heat storage material for applications up to 750°C. Furthermore, valorization of demolition wastes as sensible heat storage material is a sustainable approach in reducing fossil fuel consumption of high‐temperature industrial applications and avoiding the use of natural resources as packing material.     

一种新型太阳能冷库系统的模拟及实验研究

针对太阳能光伏发电技术、需求侧管理（DSM）技术和储能技术提出一种新型太阳能冷库系统。探讨利用冷能储存和光伏发电来减少和转移峰值电力需求、降低电力消耗成本的潜力。建立系统的仿真模型并通过实验进一步修正,结果表明系统在5—8月份基本可节约60%以上的电费,能源节约率最高可达48.38%,相应的电费支付最高可节省65.40%。     

蓄热技术及在电力调峰上的应用

蓄热技术是一种广受重视的最为重要的传统热能技术之一,它是提高能源利用利用效率和保护环境的重要技术,常用于解决热能供需不平衡的矛盾。文中主要介绍蓄热技术的起源,常用蓄热系统的类型,蓄热技术在电力调峰中的应用。     

Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources

The objective of the present work is to investigate experimentally the thermal behavior of a packed bed of combined sensible and latent heat thermal energy storage (TES) unit. A TES unit is designed, constructed and integrated with constant temperature bath/solar collector to study the performance of the storage unit. The TES unit contains paraffin as phase change material (PCM) filled in spherical capsules, which are packed in an insulated cylindrical storage tank. The water used as heat transfer fluid (HTF) to transfer heat from the constant temperature bath/solar collector to the TES tank also acts as sensible heat storage (SHS) material. Charging experiments are carried out at constant and varying (solar energy) inlet fluid temperatures to examine the effects of inlet fluid temperature and flow rate of HTF on the performance of the storage unit. Discharging experiments are carried out by both continuous and batchwise processes to recover the stored heat. The significance of time wise variation of HTF and PCM temperatures during charging and discharging processes is discussed in detail and the performance parameters such as instantaneous heat stored and cumulative heat stored are also studied. The performance of the present system is compared with that of the conventional SHS system. It is found from the discharging experiments that the combined storage system employing batchwise discharging of hot water from the TES tank is best suited for applications where the requirement is intermittent.     

Experimental characterisation of a thermal energy storage system using temperature and power controlled charging

The experimental set-up and technical aspects for charging a thermal energy storage (TES) of a proposed solar cooker at constant temperature and variable electrical power are presented. The TES is developed using a packed pebble bed. An electrical hot plate simulates the concentrator which heats up oil circulating through a copper coil absorber charging the TES system. A computer program to acquire data for monitoring the storage system and to maintain a nearly constant outlet charging temperature is developed using Visual Basic. The input power to the hot plate is also controlled to simulate the variation of the daily solar radiation by using another Visual Basic program. A combined internal model control (IMC) and proportional, integral and derivative (PID) temperature control structure is tested on the TES system under varying conditions and its performance is reasonable within a few degrees of the set temperature points. Results of the charging experiments are used to characterise the storage system. The different experiments indicate various degrees of stratification in the storage tank.     

Research progress of solar thermochemical energy storage

Solar thermal power generation technology has great significance to alleviate global energy shortage and improve the environment. Solar energy must be stored to provide a continuous supply because of the intermittent and instability nature of solar energy. Thermochemical storage (TCS) is very attractive for high‐temperature heat storage in the solar power generation because of its high energy density and negligible heat loss. To further understand and develop TCS systems, comprehensive analyses and studies are very necessary. The basic principle and main components of a solar TCS system are described in this paper. Besides, recent progress and existing problems of several promising reaction systems are introduced. Further research directions are pointed out considering the technical, economic, and environmental issues that existed in the wide application of TCS. Copyright © 2014 John Wiley & Sons, Ltd.     

Key performance indicators in thermal energy storage: Survey and assessment

Thermal energy storage (TES) is recognised as a key technology for further deployment of renewable energy and to increase energy efficiency in our systems. Several technology roadmaps include this technology in their portfolio to achieve such objectives. In this paper, a first attempt to collect, organise and classify key performance indicators (KPI) used for TES is presented. Up to now, only KPI for TES in solar power plants (CSP) and in buildings can be found. The listed KPI are quantified in the literature and compared in this paper. This paper shows that TES can only be implemented by policy makers if more KPI are identified for more applications. Moreover, close monitoring of the achievements of the already identified KPI needs to be carried out to demonstrate the potential of TES.     

Solar Thermal Power Towers

The solar thermal central receiver technology, known as solar power towers, is rapidly evolving to a state of near-term energy availability for electrical power generation and industrial process heat applications. The systems consist of field arrays of heliostat reflectors, a central receiver boiler, short term thermal storage devices, and either turbine-generators or heat exchangers. Fluid temperatures up to 550°C are currently achievable, and technology developments are underway to reach 1100°C. Six solar power towers are now under construction or in test operation in five countries around the world.     

Simulated energy and exergy analyses of the charging of an oil-pebble bed thermal energy storage system for a solar cooker

Energy balance equations are used to model the solar energy capture (SEC) system and the thermal energy storage (TES) system of a proposed indirect solar cooker. An oil-pebble bed is used as the TES material. Energy and exergy analyses are carried out using two different charging methods to predict the performance of the TES system. The first method charges the TES system at a constant flowrate. In the second method, the flowrate is made variable to maintain a constant charging temperature. A Simulink block model is developed to solve the energy balance equations and to perform energy and exergy analyses. Simulation results using the two methods indicate a greater degree of thermal stratification and energy stored when using constant-temperature charging than when using constant-flowrate charging. There are greater initial energy and exergy rates for the constant-flowrate method when the solar radiation is low. Energy efficiencies using both methods are comparable whilst the constant-temperature method results in greater exergy efficiency at higher levels of the solar radiation. Parametric results showing the effect of each charging method on the energy and exergy efficiencies are also presented.     

Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials

Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used later for heating and cooling applications and for power generation. TES has recently attracted increasing interest to thermal applications such as space and water heating, waste heat utilisation, cooling, and air conditioning. Phase change materials (PCMs) used for the storage of thermal energy as latent heat are special types of advanced materials that substantially contribute to the efficient use and conservation of waste heat and solar energy. This paper provides a comprehensive review on the development of latent heat storage (LHS) systems focused on heat transfer and enhancement techniques employed in PCMs to effectively charge and discharge latent heat energy, and the formulation of the phase change problem. The main categories of PCMs are classified and briefly described, and heat transfer enhancement technologies, namely dispersion of low‐density materials, use of porous materials, metal matrices and encapsulation, incorporation of extended surfaces and fins, utilisation of heat pipes, cascaded storage, and direct heat transfer techniques, are also discussed in detail. Additionally, a two‐dimensional heat transfer simulation model of an LHS system is developed using the control volume technique to solve the phase change problem. Furthermore, a three‐dimensional numerical simulation model of an LHS is built to investigate the quasi‐steady state and transient heat transfer in PCMs. Finally, several future research directions are provided.     

Development of graphite foam infiltrated with MgCl2 for a latent heat based thermal energy storage (LHTES) system

Thermal energy storage (TES) systems that are compatible with high temperature power cycles for concentrating solar power (CSP) require high temperature media for transporting and storing thermal energy. To that end, TES systems have been proposed based on the latent heat of fusion of the phase change materials (PCMs). However, PCMs have relatively low thermal conductivities. In this paper, use of high-thermal-conductivity graphite foam infiltrated with a PCM (MgCl₂) has been investigated as a potential TES system. Graphite foams with two porosities were infiltrated with MgCl₂. The infiltrated composites were evaluated for density, heat of fusion, melting/freezing temperatures, and thermal diffusivities. Estimated thermal conductivities of MgCl₂/graphite foam composites were significantly higher than those of MgCl₂ alone over the measured temperature range. Furthermore, heat of fusion, melting/freezing temperatures, and densities showed comparable values to those of pure MgCl₂. Results of this study indicate that MgCl₂/graphite foam composites show promise as storage media for a latent heat thermal energy storage system for CSP applications.     

The potential of metal hydrides paired with compressed hydrogen as thermal energy storage for concentrating solar power plants

Concentrating solar power (CSP) plants require thermal energy storage (TES) systems to produce electricity during the night and periods of cloud cover. The high energy density of high-temperature metal hydrides (HTMHs) compared to state-of-the-art two-tank molten salt systems has recently promoted their investigation as TES systems. A common challenge associated with high-temperature metal hydride thermal energy storage systems (HTMH TES systems) is storing the hydrogen gas until it is required by the HTMH to generate heat. Low-temperature metal hydrides can be used to store the hydrogen but can comprise a significant proportion of the overall system cost and they also require thermal management, which increases the engineering complexity. In this work, the potential of using a hydrogen compressor and large-scale underground hydrogen gas storage using either salt caverns or lined rock caverns has been assessed for a number of magnesium- and sodium-based hydrides: MgH₂, Mg₂FeH₆, NaMgH₃, NaMgH₂F and NaH. Previous work has assumed that the sensible heat of the hydrogen released from the HTMH would be stored in a small, inexpensive regenerative material system. However, we show that storing the sensible heat of the hydrogen released would add between US$3.6 and US$7.5/kWh_th to the total system cost for HTMHs operating at 565 °C. If the sensible heat of released hydrogen is instead exploited to perform work then there is a flow-on cost reduction for each component of the system. The HTMHs combined with underground hydrogen storage all have specific installed costs that range between US$13.7 and US$26.7/kWh_th which is less than that for current state-of-the-art molten salt heat storage. Systems based on the HTMHs Mg₂FeH₆ or NaH have the most near term and long term potential to meet SunShot cost targets for CSP thermal energy storage. Increasing the operating temperature and hydrogen equilibrium pressure of the HTMH is the most effective means to reduce costs further.     

高温相变蓄热技术的研究进展

蓄热技术不仅能缓解环境污染和能源浪费的问题,还可以解决热能供给与需求失的矛盾.文中对高温相变蓄热技术的应用和研究现状做了一个综述,从蓄热材料的选择、蓄热器的数值模拟和数学建模、系统研究三个方面对高温相变蓄热技术的研究进展热点以及现状进行了总结.尤其对高温相变蓄热技术在太阳能热发电中的应用现状,并对高温相变蓄热技术在太阳能热发电中的应用进行了分析和展望.     

Assessment and optimization of an integrated energy system with electrolysis and fuel cells for electricity,cooling and hydrogen production using various optimization techniques

In this research study, a novel integrated solar based combined, cooling, heating and, power (CCHP) is proposed consisting of Parabolic trough solar collectors (PTSC) field, a dual-tank molten salt heat storage, an Organic Rankine Cycle (ORC), a Proton exchange membrane fuel cell (PEMFC), a Proton exchange membrane electrolyzer (PEME), and a single effect Li/Br water absorption chiller. Thermodynamics and economic relations are used to analyze the proposed CCHP system. The mean of Tehran solar radiation as well as each portion of solar radiation during 24 h in winter is obtained from TRNSYS software to be used in PTSC calculations. A dynamic model of the thermal storage unit is assessed for proposed CCHP system under three different conditions (i.e., without thermal energy storage (TES), with TES and with TES + PEMFC). The results demonstrate that PEMFC has the ability to improve the power output by 10% during the night and 3% at sunny hours while by using TES alone, the overnight power generation is 86% of the power generation during the sunny hours. The optimum operating condition is determined via the NSGA-II algorithm with regards to exergy efficiency and total cost rate as objective functions where the optimum values are 0.058 ($/s) and 80%, respectively. The result of single objective optimization is 0.044 ($/s) for the economic objective in which the exergy efficiency is at its lowest value (57.7%). In addition, results indicate that the amount of single objective optimization based on exergetic objective is 88% in which the total cost rate is at its highest value (0.086 $/s). The scattered distribution of design parameters and the decision variables trend are investigated. In the next step, five different evolutionary algorithms namely NSGA-II, GDE3, IBEA, SMPSO, and SPEA2 are applied, and their Pareto frontiers are compared with each other.     

Operation strategies guideline for packed bed thermal energy storage systems

Packed bed thermal energy storage (TES) systems have been identified in the last years as one of the most promising TES alternatives in terms of thermal efficiency and economic viability. The relative simplicity of this storage concept opens an important opportunity to its implementation in many environments, from the renewable solar‐thermal frame to the industrial waste heat recovery. In addition, its implicit flexibility allows the use of a wide variety of solid materials and heat transfer fluids, which leads to its deployment in very different applications. Its potential to overcome current heat storage system limitations regarding suitable temperature ranges or storage capacities has also been pointed out. However, the full implementation of the packed bed storage concept is still incomplete since no industrial scale units are under operation. The main underlying reasons are associated to the lack of a complete extraction of the full potential of this storage technology, derived from a successful system optimization in terms of material selection, design, and thermal management. These points have been evidenced as critical in order to attain high thermal efficiency values, comparable to the state‐of‐the‐art storage technologies, with improved technoeconomic performance. In order to bring this storage technology to a more mature status, closer to a successful industrial deployment, this paper proposes a double approach. First, a low‐cost by‐product material with high thermal performance is used as heat storage material in the packed bed. Second, a complete energetic and efficiency analysis of the storage system is introduced as a function of the thermal operation. Overall, the impact of both the selected storage material and the different thermal operation strategies is discussed by means of a thermal model which permits a careful discussion about the implications of each TES deployment strategy and the underlying governing mechanisms. The results show the paramount importance of the selected operation method, able to increase the resulting cycle and material usage efficiency up to values comparable to standard currently used TES solutions.