Energy and water in Kuwait: A sustainability viewpoint, Part II

In Kuwait, the daily consumption per capita of electric power is 14,000 kWh, and of desalted water is 600 L. These are among the highest in the world, and the total consumption of each is almost doubled every 10 years. The cogeneration power desalting plants CPDP producing these two commodities consumed about 54% of the total 150 millions barrels of fuel consumed in the year 2005. If these consumption and production patterns prevail, the fuel oil produced in the country can be fully consumed locally in 30 years, with nothing left for export, the main source of income. The picture can be changed if better desalted water and power production methods are used. These include changing the desalting method from multistage flash MSF known by its high energy consumption to the more energy efficient seawater reverse osmosis SWRO; and power production method of steam or gas turbine cycles to combined gas/steam turbine combined cycle known of its high efficiency. The energy consumed by the air conditioning AC systems should be reduced by using better codes of building insulation and more efficient AC systems. Other conservation methods to reduce water consumption and the energy consumed by transportation are outlined in this paper.     

三废流化混燃炉在节能减排方面的应用

阐述了三废流化混燃炉的工艺技术及在节能减排方面所起到的作用,探讨了三废流化混燃炉的节能效果。     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites

Carbon materials particularly in the form of sparkling diamonds have held mankind spellbound for centuries, and in its other forms, like coal and coke continue to serve mankind as a fuel material, like carbon black, carbon fibers, carbon nanofibers and carbon nanotubes meet requirements of reinforcing filler in several applications. All these various forms of carbon are possible because of the element's unique hybridization ability. Graphene (a single two-dimensional layer of carbon atoms bonded together in the hexagonal graphite lattice), the basic building block of graphite, is at the epicenter of present-day materials research because of its high values of Young's modulus, fracture strength, thermal conductivity, specific surface area and fascinating transport phenomena leading to its use in multifarious applications like energy storage materials, liquid crystal devices, mechanical resonators and polymer composites. In this review, we focus on graphite and describe its various modifications for use as modified fillers in polymer matrices for creating polymer-carbon nanocomposites.