1‐amino‐4,5‐8‐naphthalenetricarboxylic acid‐1,8‐lactam‐4,5‐imide‐containing macrocycles: synthesis,molecular modelling and polymerization

Novel macrocycles containing 1‐amino‐4,5‐8‐naphthalenetricarboxylic acid‐1,8‐lactam‐4,5‐imide and 1,4,5‐8‐naphthalenetetracarboxylic bisimide fragments were synthesized by the high‐temperature pseudo‐high‐dilution acylation of the corresponding diols with isophthaloyl chloride, 4,4′‐ and 2,2′‐dichlorocarbonyl biphenyls with up to 60% yield. An important side‐reaction that impedes cyclization was found to be the reaction of diol OH groups with HCl during the acetylation. The ring strain in synthesized macrocyles and model cycles was estimated using the isodesmic reaction approach at the B3LYP/6–311 + G(d,p)//HF/3–21G level of theory. Lactamimide‐containing macrocycles were found to be more strained than bisimide‐containing macrocycles. The ring‐opening polymerization (ROP) of synthesized macrocycles in the molten state shows that the driving force of this process is the strain release on ring‐opening. The ROP of lactamimide‐containing macrocycles was found to be an efficient way to obtain lactamimide‐containing polymers, which are otherwise difficult to synthesize. Copyright © 2003 Society of Chemical Industry     

Asymmetric Aza‐Morita–Baylis–Hillman‐Type Reactions: The Highly Enantioselective Reaction between Unmodified α,β‐ Unsaturated Aldehydes and N‐Acylimines by Organo‐co‐catalysis

The highly enantioselective organo‐co‐catalytic aza‐Morita–Baylis–Hillman (MBH)‐type reaction between N‐carbamate‐protected imines and α,β‐unsaturated aldehydes has been developed. The organic co‐catalytic system of proline and 1,4‐diazabicyclo[2.2.2]octane (DABCO) enables the asymmetric synthesis of the corresponding N‐Boc‐ and N‐Cbz‐protected β‐amino‐α‐alkylidene‐aldehydes in good to high yields and up to 99% ee. In the case of aza‐MBH‐type addition of enals to phenylprop‐2‐ene‐1‐imines, the co‐catalytic reaction exhibits excellent 1,2‐selectivity. The organo‐co‐catalytic aza‐MBH‐type reaction can also be performed by the direct highly enantioselective addition of α,β‐unsaturated aldehydes to bench‐stable N‐carbamate‐protected α‐amidosulfones to give the corresponding β‐amino‐α‐alkylidene‐aldehydes with up to 99% ee. The organo‐co‐catalytic aza‐MBH‐type reaction is also an expeditious entry to nearly enantiomerically pure β‐amino‐α‐alkylidene‐amino acids and β‐amino‐α‐alkylidene‐lactams (99% ee). The mechanism and stereochemistry of the chiral amine and DABCO co‐catalyzed aza‐MBH‐type reaction are also discussed.     

Preparation of 2‐Aryl‐2H‐benzotriazoles by Zinc‐Mediated Reductive Cyclization of o‐Nitrophenylazophenols in Aqueous Media without the Use of Organic Solvents

Zinc powder‐mediated reductive cyclization of o‐nitrophenylazophenols in alkaline solution affords the corresponding 2‐aryl‐2H‐benzotriazoles in high yields under mild reaction conditions. No organic solvents are used in the reaction and only minimal amounts in the work‐up.     

Enantioselective Addition of Diphenylphosphine to 3‐Methyl‐4‐nitro‐5‐alkenylisoxazoles

An enantioselective Michael addition reaction of diphenylphosphine to substituted alkenylisoxazoles has been developed. The reaction proceeds efficiently under mild conditions with high yields (up to 99%) and moderate to excellent enantioselectivities (up to 92%) thus providing a hitherto unavailable direct access to a library of chiral tertiary phosphine‐functionalized isoxazoles.     

Synthesis of 2‐Aminobenzothiazoles via Copper(I)‐Catalyzed Cross‐Coupling with Part‐Per‐Million Catalyst Loadings

An efficient protocol has been developed for the preparation of 2‐aminobenzothiazoles via a copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates at very low catalyst loadings [typically 50 ppm of copper(I) iodide (CuI)]. A variety of 2‐iodoanilines could be cross‐coupled with isothiocyanates, affording 2‐aminobenzothiazoles in moderate to good yields (49–93%) under the given conditions. The turnover number (TON) of this reaction reaches 67,000 and the reaction could be scaled up, at least, to the gram‐scale.     

Enantioselective Synthesis of cis‐4‐Formyl‐β‐lactams via Chiral N‐Heterocyclic Carbene‐Catalyzed Kinetic Resolution

An efficient synthesis of optically pure cis‐4‐formyl‐β‐lactams (up to 99% ee) by a chiral NHC‐catalyzed ring expansion reaction has been realized, featuring the ready availability of both the substrate and the catalyst, and the mild reaction conditions. The current method is also suitable for the synthesis of enantioenriched 4‐formyl‐β‐lactams and succinimides containing quaternary carbon centers.     

Superbase‐Catalyzed [4+2] Cycloaddition of Acetylenes to 3,6‐Di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine: A Facile Synthesis of 3,6‐Di(pyrrol‐2‐yl)pyridazines

Acetylenes undergo the [4+2] cycloaddition to 3,6‐di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine in the potassium hydroxide/dimethyl sulfoxide or potassium tert‐butoxide/dimethyl sulfoxide systems (80 °C, 2.5–4 h) to afford (after extrusion of the nitrogen molecule from the intermediate) 3,6‐di(pyrrol‐2‐yl)pyridazines in up to 73% yield, while under non‐catalytic conditions this reaction does not take place. This unusual result substantially extends the scope of synthetic application and mechanistic diversity of the Diels–Alder reaction. The step‐wise mechanisms involving the formation of [OH/tetrazine]⁻ or [t‐BuO/tetrazine]⁻ anionic intermediate complexes or cycloaddition of tetrazine to the acetylide anion are considered.     

Synthesis and characterization of novel poly(arylene ether)s based on 9,10‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) anthracene and 2,7‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) fluorene

Two new bisfluoro monomers 9,10‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) anthracene and 2,7‐bis‐(4‐fluoro‐3‐trifluoromethylphenyl) fluorene have been synthesized by the cross‐coupling reaction of 2‐fluoro‐3‐trifluoromethyl phenyl boronic acid with 9,10‐dibromo anthracene and 2,7‐dibromo fluorine, respectively. These two bisfluoro compounds were used to prepare several poly(arylene ether)s by aromatic nucleophilic displacement of fluorine with various bisphenols; such as bisphenol‐A, bisphenol‐6F, bishydroxy biphenyl, and 9,9‐bis‐(4‐hydroxyphenyl)‐fluorene. The products obtained by displacement of the fluorine atoms exhibits weight‐average molar masses up to 1.5 ×10⁵ g mol^?1 and number average molecular weight up to 6.8 × 10⁴ g mol^?1 in GPC. These poly(arylene ether)s show very high thermal stability even up to 490°C for 5% weight loss occurring at this temperature in TGA in synthetic air and showed glass transition temperature observed up to 310°C. All the polymers are soluble in a wide range of organic solvents, e.g., CHCl₃, THF, NMP, and DMF. Films cast from DMF solution are brittle in nature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Chiral Squaramide‐Catalyzed Highly Enantioselective Michael Addition of 2‐Hydroxy‐1,4‐naphthoquinones to Nitroalkenes

A chiral squaramide‐organocatalyzed, highly enantioselective Michael addition of 2‐hydroxy‐1,4‐naphthoquinones to nitroalkenes has been developed. This reaction afforded the chiral naphthoquinones in excellent yields (up to 99%) and excellent enantioselectivity (up to 98% ee) under very low catalyst loading (0.25 mol%). This organocatalytic asymmetric Michael addition provides an efficient alternative route toward the synthesis of chiral functionalized naphthoquinones.     

Synthesis of Chiral 2‐Hydroxy‐1‐methylpropanoates by Rhodium‐Catalyzed Stereoselective Hydrogenation of α‐(Hydroxymethyl)‐acrylate Derivatives

The synthesis of chiral 3‐hydroxy‐2‐methylpropanoic acid esters (e.g., “Roche ester” 3a ) based on the rhodium‐catalyzed stereoselective hydrogenation of Baylis–Hillman reaction products was investigated. Full conversions and enantioselectivities of up to 99% at a substrate/catalyst ratio of up to 500/1 were achieved by application of bisphospholanes of the catASium M series as ancillary ligands. An interesting kinetic resolution was observed by the diastereoselective hydroxy‐directed hydrogenation of related racemic β‐branched precursors affording mainly anti‐isomers with up to 96%ee.     

Iron‐Catalyzed Synthesis of Allenes from 2‐Alken‐4‐ynoates and Grignard Reagents

Treatment of 2‐alken‐4‐ynoates with methyl‐ or aryl‐Grignard reagents and iron(II) chloride (10 mol%) afforded 5‐methyl‐ or 5‐aryl‐3,4‐alkadienoates in good yields as a single isomer after aqueous work‐up. Likewise, (2‐alken‐4‐ynoyl)oxazolidinones afforded (5‐methyl‐3,4‐alkadienoyl)oxazolidinones. The aldol‐type reaction with acetone was also possible in place of the hydrolytic work‐up.     

Corrosion‐Resistant Parallel Fixed‐Bed Reactors for High‐Throughput Screening of New Deacon Reaction Catalysts

Two ten‐channel fixed‐bed reactor systems were developed for high‐throughput screening of new Deacon catalysts. The sequential ten‐channel reactor allows the determination of the activity of up to ten catalysts per day. With a ten‐channel ageing reactor the long‐time stability of catalytic activity can be tested in parallel. Both systems are robust, quite resistant against corrosion, and use the identical reaction tubes which enable the direct transfer of a catalyst from one to the other system. A mass‐spectrometric pulse method has been developed and applied successfully for the analysis of the corrosive product gas mixture of the Deacon reaction.     

Asymmetric Homogeneous Hydrogenation in Flow using a Tube‐in‐Tube Reactor

In this update, the asymmetric homogeneous hydrogenation of a number of trisubstituted olefins utilizing the recently developed tube‐in‐tube gas‐liquid flow reactor is described. A number of chiral iridium‐ and rhodium‐based catalysts and other parameters such as pressure, solvent, temperature and catalyst loading were screened. The advantage of the flow set‐up for rapid screening and optimization of reaction parameters is illustrated. Furthermore, a comparative study using batch conditions aided in the optimization of the flow reaction set‐up. The set‐up was further modified to recycle the catalyst which prolonged catalytic activity.     

Highly Enantioselective Synthesis of 3‐Hydroxy‐2‐methylpropanoic Acid Esters through Ruthenium‐SYNPHOS®‐Catalyzed Hydrogenation: Useful Building Blocks for the Synthetic Community

Both enantiomers of 3‐hydroxy‐2‐methylpropanoic acid tert‐butyl ester were prepared with high enantioselectivity (up to 94 %) through a ruthenium‐SYNPHOS®‐promoted asymmetric hydrogenation reaction using an atom‐economic transformation from simple and inexpensive precursors.     

Phase‐Transfer‐Catalyzed Enantioselective Mannich Reaction of Malonates with α‐Amido Sulfones

The highly enantioselective reaction between in situ generated, Cbz‐protected azomethines and malonates in the presence of 150 mol % of potassium carbonate (50 % w/w) and 1 mol % of quinine‐derived quaternary ammonium bromides as phase‐transfer organocatalysts has been developed. This study reports a novel approach for the asymmetric Mannich‐type reaction and a wide range of azomethines, including those derived from enolizable aldehydes, is tolerated by the present system. The adducts, obtained in excellent yields with ee up to 98 %, are suitable precursors of optically pure β‐amino acids.     

Enantioselective Aza‐Henry Reaction of Imines Bearing a Benzothiazole Moiety Catalyzed by a Cinchona‐Based Squaramide

An efficient enantioselective aza‐Henry reaction of nitroalkanes to imines bearing a benzothiazole moiety catalyzed by a Cinchona‐based squaramide has been developed. In the reaction of imines, the corresponding products were obtained in good to excellent yields (up to 99%) with excellent enantioselectivities (up to >99% ee) for most of the aromatic substituted imines. The imines with electron‐withdrawing groups gave better yields than those bearing electron‐donating groups in the aza‐Henry reaction. Moreover, a one‐pot three‐component enantioselective aza‐Henry reaction using 2‐aminobenzothiazoles, aldehydes, and nitromethane was also developed. Moderate to good yields and high enantioselectivities were obtained in the one‐pot cases (up to 98% ee).     

The Method of Choice for Ring Cleavage of 2‐(Dinitroethylene)‐ 4,5‐Imidazolidinedione

2‐(dinitroethylene)‐4,5‐imidazolidinedione, which is the intermediate in preparing FOX‐7, was synthesized by acetamidine hydrochloride and diethyl oxalate. Ring cleavage reaction could be carried out more quickly, when methanol, water, and formic acid were used as ring cleavage reagents; the disadvantages from using ammonia as ring cleavage reagent could be overcome with yields of up to 65.5%. When water is used as ring cleavage reagent, the reaction rate will be high and the reaction conditions will be milder. So this method is more suitable for further up‐scaling research.     

Unmodified Nano‐Powder Magnetite Catalyzes a Four‐ Component Aza‐Sakurai Reaction

A new catalyst for an old material: magnetite is an excellent Lewis acid catalyst for the four‐component aza‐Sakurai reaction. The process could be repeated up to 15‐times without losing effectiveness, with the catalyst recycling being as easy as the use of a simple magnet. The catalyst is selective and could discriminate between aldehyde and ketone functionalities, catalyzing first the reaction with the higher electrophilic aldehyde.     

Chiral Phosphoric Acid‐Catalyzed Enantioselective Aza‐Friedel–Crafts Alkylation of Indoles with γ‐Hydroxy‐γ‐lactams

An enantioselective aza‐Friedel–Crafts reaction of indoles with γ‐hydroxy‐γ‐lactams using a chiral phosphoric acid catalyst is reported. The approach described herein provides an efficient access to 5‐indolylpyrrolidinones in good to quantitative yields and excellent enantioselectivities (up to >99% ee). The results suggest that the reaction may proceed via N‐acyliminium intermediates associated with the chiral phosphoric acid anion.     

Bismuth Triflate‐Catalyzed Addition of Allylsilanes to N‐Alkoxycarbonylamino Sulfones: Convenient Access to 3‐Cbz‐Protected Cyclohexenylamines

Bismuth triflate was found to be an efficient catalyst in the Sakurai reaction of allyltrimethylsilanes with N‐alkoxycarbonylamino sulfones. The reaction proceeded smoothly with a low catalyst loading of Bi(OTf)₃⋅4 H₂O (2–5 mol%) to afford the corresponding protected homoallylic amines in very good yields (up to 96%). A sequential allylation reaction followed by ring‐closing metathesis delivers 6–8 membered 3‐Cbz‐protected cycloalkenylamines.