Efficient and Practical Syntheses of (R)‐(5‐Amino‐2,3‐dihydro‐1H‐inden‐2‐yl)‐carbamic Acid Methyl Ester

Efficient and practical syntheses of enantiomerically pure (R)‐(5‐amino‐2,3‐dihydro‐1H‐inden‐2‐yl)‐carbamic acid methyl ester ( 1 ) by three different routes via the resolution of different aminoindan intermediates are described.     

Synthesis,structural and spectral properties of an ionic polyacetylene: Poly[N‐(5‐nitro‐2‐furanmethylene)‐2‐ethynylpyridinium bromide]

A new ionic polyacetylene was prepared by the activation polymerization of 2‐ethynylpyridine with 2‐(bromomethyl)‐5‐nitrofuran in high yield without any additional initiator or catalyst. This polymerization proceeded well in a homogeneous manner to give a high yield of the polymer (92%). The activated acetylenic triple bond of N‐(5‐nitro‐2‐furanmethylene)‐2‐ethynylpyridinium bromide, formed in the first quaternerization process, was found to be susceptible to linear polymerization. This polymer was completely soluble in such polar organic solvents as dimethylformamide, dimethyl sulfoxide, and N,N‐dimethylacetamide. The inherent viscosities of the resulting polymers were in the range 0.12–0.19 dL/g, and X‐ray diffraction analysis data indicated that this polymer was mostly amorphous. The polymer structure was characterized by various instrumental methods to have a polyacetylene backbone structure with the designed substituent. The photoluminescence peak was observed at 593 nm; this corresponded to a photon energy of 2.09 eV. The polymer exhibited irreversible electrochemical behaviors between the doping and undoping peaks. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of 3′,4′‐disubstituted terthiophenes. Characterization and electropolymerization. I. 3′,4′‐dibromo‐2,2′:5′,2″‐terthiophene in photovoltaic display

Recent studies on conducting polymers have demonstrated that polymers of 3‐substituted thiophene produce very stable compounds. Although this kind of substitution improves the regularity, structural defects still exist. To overcome this drawback, the polymerization of 3,4‐disubstituted thiophene is proposed as a convenient way of synthesizing regular, highly conjugated conductive polymers. Our interest is thus focused on the synthesis of tetra‐substituted thiophene derivatives, their polymerization, electrochemical properties, spectral characteristics, oxidizing potential, and the feasibility of photocells development. In this article, we report the synthesis and characterization of 3′,4′‐dibromo‐2,2′:5′,2″‐terthiophene which, as such or modified, may be a good starting product for obtaining new monomers of 3′,4′‐disubstituted terthiophenes, that would allow the effect of the substituents on the properties of the respective polymers to be studied. In addition, the monomer was electropolymerized and the resulting deposit was electrochemically and morphologically characterized. Two conclusions were drawn: first, more uniform and homogeneous layers than those of polythiophene are obtained; second, the thin layers of the polymer, electron acceptors, absorb in the visible. Finally, photocells were assembled to investigate their photovoltaic effect. Although the so prepared solar cells showed some photovoltaic effect, the yield was low.© 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5314–5321, 2006     

Influence of LiClO4 on the thermal,mechanical, and morphological properties of P(DMS‐co‐EO)/ P(EPI‐co‐EO) blends

The UV‐vis absorption, thermal analysis, ionic conductivity, mechanical properties, and morphology of a blend of poly(dimethylsiloxane‐co‐ethylene oxide) [P(DMS‐co‐EO)] and poly(epichlorohydrin‐co‐ethylene oxide) [P(EPI‐co‐EO)] (P(DMS‐co‐EO)/P(EPI‐co‐EO) ratio of 15/85 wt %) with different concentrations of LiClO₄ were studied. The maximum ionic conductivity (σ = 1.2 × 10^?4 S cm^?1) for the blend was obtained in the presence of 6% wt LiClO₄. The crystalline phase of the blend disappeared with increasing salt concentration, whereas the glass transition temperature (T_g) progressively increased. UV‐vis absorption spectra for the blends with LiClO₄ showed a transparent polymer electrolyte in the visible region. The addition of lithium salt decreased the tensile strength and elongation at break and increased Young's modulus of the blends. Scanning electron microscopy showed separation of the phases between P(DMS‐co‐EO) and P(EPI‐co‐EO), and the presence of LiClO₄ made the blends more susceptible to cracking. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1230–1235, 2004     

Synthesis and characterization of poly(N‐methyl aniline) doped with sulphonic acids: Their application as humidity sensors

Single step chemical polymerization of N‐methyl aniline was carried out by using ammonium persulphate as an oxidizing agent. The conducting emeraldine salt phase of the polymers using camphor sulfonic acid and p‐toluene sulfonic acid as dopants was made by a direct process. The polymers were characterized by UV‐vis and FTIR spectroscopy, scanning electron microscopy, TGA, and conductivity measurements. The synthesized polymers were found to have very good physicochemical properties and good electrical conductivity. Conductivity measurements have shown “thermal activated behavior.” The change in resistance with respect to % relative humidity (RH) was observed, when pressed pellets of the polymer were exposed to the broad range of humidity (ranging between 20 and 100% RH). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 812–820, 2006     

Effects of an oxygen‐ion beam (O+7, 100 MeV) and γ irradiation on polypyrrole films

Nanostructured polypyrrole films doped with para‐toluene sulfonic acid were prepared by an electrochemical process, and a comparative study of the effects of swift heavy ions and γ‐ray irradiation on the structural and optical properties of the polypyrrole was carried out. Oxygen‐ion (energy = 100 MeV, charge state = +7) fluence varied from 1 × 10¹⁰ to 3 × 10¹² ions/cm², and the γ dose varied from 6.8 to 67 Gy. The polymer films were characterized by X‐ray diffraction, ultraviolet–visible spectroscopy, and scanning electron microscopy. The X‐ray diffraction pattern showed that after irradiation, the crystallinity improved with increasing fluence because of an increase in the crystalline regions dispersed in an amorphous phase. The ultraviolet–visible spectra showed a shift in the absorbance edge toward higher wavelengths, which indicated a significant decrease in the band gap of the polypyrrole film after irradiation. The scanning electron microscopy study showed a systematic change in the surface of the polymer. A similar pattern was observed with the γ irradiation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and redox and electrochromic behaviors of poly(3-n-octyloxythiophene)

Poly(3-n-octyloxythiophene), a conjugated polymer, which possessed solubility in common organic solvents, was synthesized by electrochemical polymerization in the presence of lithium perchlorate as the supporting electrolyte and sodium dodecyl sulfate as the surfactant in an aqueous medium. Characterizations of the intermediate, monomer, and polymer were performed by NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, and gel permeation chromatography. The process of electrochemical polymerization and the electrochemical redox behaviors were investigated by cyclic voltammetry and the potentiostatic method. A poly(3-n-octyloxythiophene) film that was deposited on a platinum electrode was found to exhibit electrochromic behaviors, and it switched electrochemically between blue–green oxidized and dark red reduced states. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and spectroelectrochemistry of dithieno(3,2‐b:2′,3′‐d)pyrrole derivatives

New π‐conjugated polymers containing dithieno(3,2‐b:2′,3′‐d)pyrrole (DTP) were successfully synthesized via electropolymerization. The effect of structural differences on the electrochemical and optoelectronic properties of the 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP–aryl–NH₂), 10‐[4H‐dithiyeno(3,2‐b:2′,3′‐d)pirol‐4‐il]dekan‐1‐amine (DTP–alkyl–NH₂), and 1,10‐bis[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl] decane (DTP–alkyl–DTP) were investigated. The corresponding polymers were characterized by cyclic voltammetry, NMR (¹H‐NMR and ¹³C‐NMR), and ultraviolet–visible spectroscopy. Changes in the electronic nature of the functional groups led to variations in the electrochemical properties of the π‐conjugated systems. The electroactive polymer films revealed redox couples and exhibited electrochromic behavior. The replacement of the DTP–alkyl–DTP unit with DTP–aryl–NH₂ and DTP–alkyl–NH₂ resulted in a lower oxidation potential. Both the poly(10‐(4H‐Dithiyeno[3,2‐b:2′,3′‐d]pirol‐4‐il)dekan‐1‐amin) (poly(DTP–alkyl–NH₂)) and poly(1,10‐bis(4H‐dithieno[3,2‐b:2′,3′‐d]pyrrol‐4‐yl) decane) (poly(DTP–alkyl–DTP)) films showed multicolor electrochromism and also fast switching times (<1 s) in the visible and near infrared regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40701.     

Synthesis,characterization, and acoustic properties of new soluble polyurethanes based on 2,2′‐[1,4‐phenylenebis(nitrilomethylylidene)diphenol and 2,2′‐[4,4′‐methylene‐di‐2‐methylphenylene‐1,1′‐bis(nitrilomethylylidene)]diphenol

Eight novel polyurethanes based on 2,2′‐[1,4‐phenylenebis(nitrilomethylylidene)]diphenol and 2,2′‐[4,4′‐methylene‐di‐2‐methylphenylene‐1,1′‐bis(nitrilomethylylidene)]diphenol acting as hard segments with two aromatic and two aliphatic diisocyanates (4,4′‐diphenylmethane diisocyanate, toluene 2,4‐diisocyanate, isophorone diisocyanate, and hexamethylene diisocyanate) were prepared and characterized with Fourier transform infrared, UV spectrophotometry, fluorescence spectroscopy, ¹H‐NMR and ¹³C‐NMR spectroscopy, thermogravimetric analysis, and differential thermal analysis. All the polyurethanes contained domains of semicrystalline and amorphous structures, as indicated by X‐ray diffraction. The acoustic properties and solubility parameters were calculated with the group contribution method. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.     

Palladium‐Catalyzed Two‐Component Domino Coupling Reaction of (Z)‐β‐Bromostyrenes with Norbornenes: Synthesis of 1,5‐Enynes

Polyfunctional molecules, 1,5‐enynes, have been achieved via a palladium(0)‐catalyzed domino coupling reaction of (Z)‐β‐bromostyrenes with norbornenes in the presence of cesium carbonate and N,N‐dimethylformamide. The process involves a double Heck‐type procedure, two‐fold C(sp²) H activation and formation of two carbon‐carbon bonds. There are possibilities of diversified transformation for the domino coupling of (Z)‐β‐bromostyrenes with norbornenes, the procedure is successfully driven to 1,5‐enynes via accurate adjustment of the reaction conditions.

     

Synthesis and characterization of novel aromatic poly(amide‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl or 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic diamines

New aromatic diimide‐dicarboxylic acids having kinked and cranked structures, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b), were synthesized by the reaction of trimellitic anhydride with 2,2′‐bis(4‐aminophenoxy)biphenyl (1a) and 2,2′‐bis(4‐aminophenoxy)‐1,1′‐binaphthyl (1b), respectively. Compounds 2a and 2b were characterized by FT‐IR and NMR spectroscopy and elemental analyses. Then, a series of novel aromatic poly(amide‐imide)s were prepared by the phosphorylation polycondensation of the synthesized monomers with various aromatic diamines. Owing to structural similarity, and a comparison of the characterization data, a model compound was synthesized by the reaction of 2b with aniline. The resulting polymers with inherent viscosities of 0.58–0.97 dl g^?1 were obtained in high yield. The polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(amide‐imide)s were also determined. The polymers were readily soluble in polar aprotic solvents. They exhibited excellent thermal stabilities and had 10% weight loss at temperatures above 500 °C under a nitrogen atmosphere. Copyright © 2003 Society of Chemical Industry     

Combustion Properties of Amino‐Substituted Guanidinium 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the combustion properties of the amino‐substituted guanidinium 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM) series, including the bis‐mono, di and triaminoguanidinium salts. These salts are of interest as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4‐BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

Synthesis,characterization, and comparison of self‐doped,doped, and undoped forms of polyaniline,poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)]

Polyaniline (PANI), poly(o‐anisidine), and poly[aniline‐co‐(o‐anisidine)] were synthesized by chemical oxidative polymerization with ammonium persulfate as an oxidizing reagent in an HCl medium. The viscosities, electrical conductivity, and crystallinity of the resulting polymers (self‐doped forms) were compared with those of the doped and undoped forms. The self‐doped, doped, and undoped forms of these polymers were characterized with infrared spectroscopy, ultraviolet–visible spectroscopy, and a four‐point‐probe conductivity method. X‐ray diffraction characterization revealed the crystalline nature of the polymers. The observed decrease in the conductivity of the copolymer and poly(o‐anisidine) with respect to PANI was attributed to the incorporation of the methoxy moieties into the PANI chain. The homopolymers attained conductivity in the range of 3.97 × 10^?3 to 7.8 S/cm after doping with HCl. The conductivity of the undoped forms of the poly[aniline‐co‐(o‐anisidine)] and poly(o‐anisidine) was observed to be lower than 10^?5 J/S cm^?1. The conductivity of the studied polymer forms decreased by the doping process in the following order: self‐doped → doped → undoped. The conductivity of the studied polymers decreased by the monomer species in the following order: PANI → poly[aniline‐co‐(o‐anisidine)] → poly(o‐anisidine). All the polymer samples were largely amorphous, but with the attachment of the pendant groups of anisidine to the polymer system, the crystallinity region increased. The undoped form of poly[aniline‐co‐(o‐anisidine)] had good solubility in common organic solvents, whereas doped poly[aniline‐co‐(o‐anisidine)] was moderately crystalline and exhibited higher conductivity than the anisidine homopolymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Thermal‐ and Sun‐Promoted Generation of Silver Nanoparticles Embedded into Poly(vinyl alcohol) Films

Nanocomposites based on poly(vinyl alcohol) and silver nanoparticles were efficiently prepared by sun‐ and thermal‐promoted reduction processes. Uniaxial drawing of the Ag/PVA nanocomposites favoured the anisotropic distribution of silver particles, providing oriented films with polarisation‐dependent tunable optical properties. These dichroic properties were more pronounced for nanocomposites produced by sun exposition, which provided more compact and interacting metal clusters. The results obtained suggest the nanocomposite films could find potential applications as colour polarising filters, radiation responsive polymeric objects and smart flexible films in packaging applications.

     

Synthesis and characterization of new thermally stable poly(ester‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic dihydroxy compounds

A series of new alternating aromatic poly(ester‐imide)s were prepared by the polycondensation of the preformed imide ring‐containing diacids, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A model compound (3) was also prepared by the reaction of 2b with phenol, its synthesis permitting an optimization of polymerization conditions. Poly(ester‐imides) were fully characterized by FTIR, UV‐vis and NMR spectroscopy. Both biphenylene‐ and binaphthylene‐based poly(ester‐imide)s exhibited excellent solubility in common organic solvents such as tetrahydrofuran, m‐cresol, pyridine and dichloromethane. However, binaphthylene‐based poly(ester‐imide)s were more soluble than those of biphenylene‐based polymers in highly polar organic solvents, including N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide and dimethyl sulfoxide. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 261 and 315 °C. Thermal behaviour of the polymers obtained was characterized by thermogravimetric analysis, and the 10 % weight loss temperatures of the poly(ester‐imide)s was in the range 449–491 °C in nitrogen. Furthermore, crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resultant poly(ester‐imide)s exhibited nearly an amorphous nature, except poly(ester‐imide)s derived from hydroquinone and 4,4′‐dihydroxybiphenyl. In general, polymers containing binaphthyl units showed higher thermal stability but lower crystallinity than polymers containing biphenyl units. Copyright © 2005 Society of Chemical Industry     

Synthesis and physical properties of liquid‐crystalline copolymers with azobenzene segments

To investigate the effects of photoisomerizable azobenzene segments on the liquid‐crystalline characteristics and thermal properties of polymers, a series of liquid‐crystalline homopolymers and copolymers with azobenzene segments was synthesized. The azobenzene contents of the copolymers were estimated with elemental analysis. The photoisomerization of the azobenzene derivatives was studied with ultraviolet–visible (UV–vis) spectroscopy. The UV–vis absorption of the copolymers was found to be parallel with the content of the azobenzene segments. UV irradiation was found to cause a decrease in the copolymer transmittance around 355 nm due to the photoinduced isomerization from entgegen (E) to zusammen (Z). The phase‐transition temperatures and molecular weights of the polymers were investigated with differential scanning calorimetry and gel permeation chromatography, respectively. The variation in the phase‐transition temperature of the homopolymers before and after UV (365 nm) irradiation was investigated. The bended Z structure was found to disturb the order of the orientation of liquid crystals and to lower the phase‐transition temperature. The appearance of the polymer film was changed from opaque to clear after sufficient UV irradiation. The image recording of the polymer films was achieved after UV irradiation through a mask with pictures. The stability and reliability of the Nematic‐Isotropic phase transition of the homopolymers was evaluated with repeated cycles of 365‐nm UV irradiation and heating at 130°C. After the recycle phase transition was repeated nine times, no significant decay in the response and transmittance could be found. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 2006     

Regioselective Palladium(0)‐Catalyzed Cross‐Coupling Reactions and Metal‐Halide Exchange Reactions of Tetrabromothiophene: Optimization,Scope and Limitations

The Suzuki reaction of tetrabromothiophene with arylboronic acids provides a regioselective approach to various 5‐aryl‐2,3,4‐tribromothiophenes, symmetrical 2,5‐diaryl‐3,4‐dibromothiophenes, and tetraarylthiophenes. Unsymmetrical 2,5‐diaryl‐3,4‐dibromothiophenes are prepared by Suzuki reaction of 5‐aryl‐2,3,4‐tribromothiophenes. Tetraarylthiophenes containing two different types of aryl groups are obtained by Suzuki reactions of 2,5‐diaryl‐3,4‐dibromothiophenes. During the optimization of the conditions of each individual reaction, the solvent, the catalyst and the temperature play an important role. In several cases, classical conditions [use of tetrakis(triphenylphosphane)palladium(0), Pd(PPh₃)₄, as the catalyst] gave excellent yields. The yields of those transformations which failed or proceeded sluggishly could be significantly improved by application of a new biarylmonophosphine ligand developed by Buchwald and co‐workers. Regioselective metal‐halide exchange reactions of tetrabromothiophene provide a convenient approach to various 2,5‐disubstituted 3,4‐dibromothiophenes. 5‐Alkyl‐2‐trimethylsilyl‐3,4‐dibromothiophenes could be prepared in one pot by sequential addition of trimethylchlorosilane and alkyl bromides. The reaction of tetrabromothiophene with methyl chloroformate and subsequent Suzuki reactions afforded 3,4‐diaryl‐2,5‐bis(methoxycarbonyl)thiophenes.     

Properties of 2,2‐Bis[p‐(2′‐hydroxy‐3′‐methacryloxy propoxy)phenyl]propane/Isobornyl (Meth)acrylate copolymers

Isobornyl acrylate (IBOA) and isobornyl methacrylate (IBOMA) were used to replace triethylene glycol dimethacrylate (TEGDMA) as reactive diluents in dental restorative materials. Photopolymerization behaviors of mixtures of IBO(M)A and 2,2‐bis[p‐(2′‐hydroxy‐3′‐methacryloxy propoxy)phenyl]propane (Bis‐GMA) were investigated by Fourier transform infrared spectroscopy. The degree of conversion, volume shrinkage, contact angle, water sorption, water solubility, flexural strength, and modulus values of the Bis‐GMA/IBO(M)A formulations were measured and compared with those of a Bis‐GMA/TEGDMA formulation. The results illustrate that the degree of conversion, volume shrinkage, contact angle, water sorption, flexural strength, and modulus values of the Bis‐GMA/IBO(M)A systems were all lower than those of the Bis‐GMA/TEGDMA system; the water solubility values of the Bis‐GMA/IBO(M)A systems were higher than that of the Bis‐GMA/TEGDMA system. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012