共查询到20条相似文献,搜索用时 140 毫秒
1.
针对传统LED显示系统的缺点,提出基于公共电话网络的远程LED显示屏控制技术,该技术是采用信息技术改造传统产业的典型模式。着重介绍接口板电路设计和接收微处理器的收、发软件设计。最后分析该系统的应用前景。 相似文献
2.
点阵书写显示屏的设计实现通过书写笔可以轻松、简便地输入信息并显示的装置,以单片机为微控制器,以32×32点阵LED组成显示模块.所设计的LED显示屏无需数据传输通信,以光笔书写方式输入信息,不需要触控器件,能够实现书写显示的功能. 相似文献
3.
体育场馆用LED显示屏的出现和大量使用是社会进步和文明的体现.在LED显示屏出现以前,人们对比赛现场体育成绩的播报采用旗帜、手势或记分牌.现在,LED显示屏不仅能实时播报比赛成绩,在计时比赛中显示比赛时间,还能重播精彩画面的慢动作,大大提高了体育比赛的观赏性. 相似文献
4.
LED大屏幕显示系统主要由LED显示屏、屏幕控制器、视频信号处理器、输入信号切换矩阵、控制计算机、供配电系统、报警系统的扩声音响系统等组成。LED显示系统按使用环境,可分为室内显示屏和室外显示屏;按显示色彩,可分为单基色、双基色和三基色LED屏。 相似文献
5.
为了使LED显示屏设计中具有较为简单的驱动电路,减少过多的单片机端口占用,改进了LED显示屏设计中的驱动电路结构,整体作为选通驱动使用的移位寄存器均是串入并出的,串行数据控制整个系统,在本LED显示屏设计中只使用四根信号线完成驱动电路的搭建,串行数据的显示仅占用了单片机I/O端口中的四个,顺利完成了显示功能。 相似文献
6.
7.
基于单片机控制的LED点阵显示屏在煤矿的设计与应用 总被引:2,自引:0,他引:2
LED显示屏是利用发光二极管点阵模块或像素单元组成的平面式显示屏幕,可以显示变化的数字、文字、图形图像,在煤矿安全生产警示等方面得到广泛的应用。本设计采用AT89C51为主控模块,制作了一块16×64的汉字点阵显示屏,可以用于滚动显示汉字、时间、温度信息。本文以较为简单的8×8LED点阵显示屏为例,介绍动态滚动显示屏的基本工作原理。 相似文献
8.
无线接收信息LED显示系统 总被引:5,自引:0,他引:5
LED显示技术已很成熟且普遍 ,但由于其显示信息更新往往采用和微机连接通信 ,故应用范围局限性很大。本系统用无线接收信息 ,拓展了LED显示技术应用领域 ,尤其在远距离的室外 ,信息频繁更新的场合 ,“无线接收LED显示屏”(以下简称“无线屏”)有其突出的优点。 相似文献
9.
10.
11.
12.
讨论了分布式微机控制系统的整体设计方案、硬件的结构、软件的设计思路与方法。该控制系统具有集中管理、分散控制的良好特性。将这种技术应用于真空压力浸渍设备的控制 ,可达到较高的控制品质 相似文献
13.
LED智能照明产品创新设计应用研究 总被引:1,自引:1,他引:1
目的以LED照明产品的信息可视化、智能化为核心创新目标,以集成化、模块化为原则,聚焦于现代家居环境中具有安防功能的LED照明类产品的集成化整合研究。方法对现有家居照明产品及用户需求进行市场和用户调研,确定目标消费群并研究其生活方式、照明需求以及消费习惯,为确定设计方向、产品风格、产品功能提供依据;然后设计出能满足技术要求的LED照明产品;最后运用"信息可视化"手段为用户提供优良的交互体验。结论将打造出具有家居安防功能、信息可视化、远程控制及智能交互新体验的创新产品。 相似文献
14.
15.
针对家庭LED灯能源耗电问题,提出了一种智能调光节能控制方法。该方法以安卓操作系统为平台,智能手机作为客户端,利用LM3409HV降压自适应反馈控制机制,通过Wi Fi网络实现无线远程可调光节能LED灯的低功率照明。该系统采用太阳能绿色可再生能源为智能电网供电,结合室外光强,通过光敏传感器和脉宽调制(PWM)技术调节LED灯亮度。在通用输入电压下,可实现高效率、高功率因数调光。与传统的机械式开关LED照明电灯相比,智能调光系统设计的软硬件更为灵活和方便、成本更低、功耗更小,界面和功能都具有良好的通用性、准确性,具有广泛的应用前景。 相似文献
16.
Kato H. Kojima M. Gattoh M. Okumura Y. Morinaga S. 《IEEE transactions on instrumentation and measurement》1991,40(6):1021-1026
A method for obtaining the tilt angle and direction in a two-dimensional plane, by using a photoelectric inclination sensor consisting of an LED, a hemispherical spirit level, and a photodiode array is explained. An application of the sensor to the measurement of the shape of a 3-D object is also described. Light from the LED projects a bubble in the spirit level and throws a shadow onto the surface of an array composed of four equivalent p-n junction diodes, isolated from each other by a cross on a wafer. The tilt angle and direction in a two-dimensional plane are obtained by combining the diode outputs. By positioning the sensor on the crosspoints of the lines drawn longitudinally and latitudinally at an interval on the surface of a small mountain in a Japanese garden, the x and y components of the tilt angle can be obtained and its shape is reconstructed by a computer. The principle of the sensor, the system to display the tilt angle and its x and y components, and the application of the system to the measurement of the shape of a mountain are explained 相似文献
17.
单片机的数据采集实验板设计 总被引:1,自引:0,他引:1
设计的电压数据采集系统是以单片机(STC89C52)为控制核心的系统.该系统具有电路简单、功耗低、可靠性高等优点,能实现对多路模拟通道信号的数据采集与处理.并且通过ADC0809模数转换芯片把采集的电压信号转换为数字信号,再经单片机简单处理,实现将采集的数据送LED显示器进行直观显示的功能.本设计采用Keil C51语言软件编程,利用单片机内部资源简化了整个硬件电路及软件的设计,模块化处理又使得电路设计清晰合理,体积小,功效性较强. 相似文献
18.
本文介绍一种在空中显示文字或图案的旋转式LED灯的设计与制作,详细介绍了系统各部分的设计方法、原理、软件流程及程序的实例,实验结果明显。 相似文献
19.
20.
《Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment》1986,247(1):107-111
The Fermilab D0 Detector is a collaborative effort that includes seventeen universities and national laboratories. The monitoring and control system for this detector will be separate from the online detector data system. A distributed, stand-alone, microprocessor-based system is being designed to allow monitoring and control functions to be available to the collaborators at their home institutions during the design, fabrication, and testing phases of the project. Individual stations are VMEbus-based 68000 systems that are networked together during installation using an ARCnet (by Datapoint Corporation) Local Area Network. One station, perhaps a MicroVAX, would have a hard disk to store a backup copy of the distributed database located in non-volatile RAM in the local stations. This station would also serve as a gateway to the online system, so that data from the control system will be available for logging with the detector data.Apple Macintosh personal computers are being developed for use as the local control consoles. Each would be interfaced to ARCnet to provide access to all control system data. Through the use of bit-mapped graphics with multiple windows and pull-down menus, a cost effective, flexible display system can be provided, taking advantage of familiar modern software tools to support the operator interface. 相似文献