Toughening of poly(butylene terephthalate) with epoxy-functionalized acrylonitrile-butadiene-styrene

Glycidyl methacrylate (GMA) functionalized acrylonitrile-butadiene-styrene (ABS) copolymers have been prepared via an emulsion polymerization process. These functionalized ABS copolymers (ABS-g-GMA) were blended with poly(butylene terephthalate) (PBT). DMA result showed PBT was partially miscible with ABS and ABS-g-GMA, and DSC test further identified the introduction of GMA improved miscibility between PBT and ABS. Scanning electron microscopy (SEM) displayed a very good dispersion of ABS-g-GMA particles in the PBT matrix compared with the PBT/ABS blend when the content of GMA in PBT/ABS-g-GMA blends was relatively low (<8 wt% in ABS-g-GMA). The improvement of the disperse phase morphology was due to interfacial reactions between PBT chains end and epoxy groups of GMA, resulting in the formation of PBT-co-ABS copolymer. However, a coarse, non-spherical phase morphology was obtained when the disperse phase contained a high GMA content (≥8 wt%) because of cross-linking reaction between the functional groups of PBT and GMA. Rheological measurements further identified the reactions between PBT and GMA. Mechanical tests showed the presence of only a small amount of GMA (1 wt%) within the disperse phase was sufficient to induce a pronounced improvement of the impact and tensile properties of PBT blends. SEM results showed shear yielding of PBT matrix and cavitation of rubber particles were the major toughening mechanisms.     

The Properties of Sepiolite Nanofibers Reinforced Polycarbonate/Poly(acrylonitrile-butadiene-styrene) Composites Using a PS-co-MAH Compatibilizer

We prepare polycarbonate/poly(acrylonitrile-butadiene-styrene) composites which are reinforced with sepiolite nanofibers and use a polystyrene-maleic anhydride copolymer for improving polycarbonate/poly(acrylonitrile-butadiene-styrene) compatibility. By measuring glass transition temperatures and morphologies, we conclude that the copolymer effectively improves the compatibility. Further, polycarbonate/poly(acrylonitrile-butadiene-styrene) composites containing various amounts of sepiolite are prepared. It is found that the surface-modified sepiolite nanofibers are well-dispersed in the polymer matrix, and the mechanical properties and heat resistance are increased with the sepiolite contents increasing. The influences of sepiolite nanofibers on the melt flowability are also investigated. With these results, the composite with the optimum properties is provided.     

Tacticity effects on the miscibility behavior of poly(methyl methacrylate)/poly(ethylene oxide-b-dimethylsiloxane-b-ethylene oxide) blends

The miscibility of a triblock copolymer poly(ethylene oxide)-poly(dimethylsiloxane)-poly(ethylene oxide) with syndiotactic and isotactic poly(methylmethacrylate) wasstudied. Although isotactic poly(methyl methacrylate) (PMMA) was miscible with poly(ethylene oxide) (PEO) in the pure state, it was immiscible with the PEO end blocks in the copolymer. In comparison, the syndiotactic poly(methyl methacrylate) (sPMMA) was miscible with the PEO blocks as indicated by melting point depression, decrease in crystallinity, and slower rate of spherulite growth of PEO. When blends of the triblock copolymer were cooled to low temperatures, the poly(dimethylsiloxane) (PDMS) middle block which resided in the interlamellar region of PEO spherulites also crystallized; the development of PDMS crystals was clearly suppressed at high sPMMA contents.On leave from Union Chemical Laboratories, Industrial Technology Research Institute, Hsinchu, Taiwan     

Modification of poly(vinyl chloride) by IPN formation with poly(ethyl acrylate)

Semi‐1 and semi‐2 interpenetrating polymer networks (IPNs) of poly(vinyl chloride) (PVC) and in situ formed poly(ethyl acrylate) (PEA) have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PEA, respectively. These two types of IPNs have been compared with respect to their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi‐1 IPNs displayed a decrease in their tensile strength and modulus while in contrast; the semi‐2 IPNs exhibited a marginal increase with increasing crosslinked PEA incorporation. The semi‐1 and semi‐2 IPNs containing 10 and 30 wt % of PEA displayed a two‐stage degradation typical of PVC in their thermogravimetric and DSC studies while confirming the increased stability of the samples with higher percentages of PEA. The softening characteristics as detected by the extent of penetration of the thermomechanical probe as has been detected by thermomechanical analysis are in conformity with their mechanicals. The biphasic cocontinuous systems as explicit from the morphological studies reveal fibrillar characteristics in both the systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

DSC and TMDSC study of melting behaviour of poly(butylene succinate) and poly(ethylene succinate)

The subsequent melting behaviour of poly(butylene succinate) (PBSU) and poly(ethylene succinate) (PES) was investigated using DSC and temperature modulated DSC (TMDSC) after they finished nonisothermal crystallization from the melt. PBSU exhibited two melting endotherms in the DSC traces upon heating to the melt, which was ascribed to the melting and recrystallization mechanism. However, one melting endotherm with one shoulder and one crystallization exotherm just prior to the melting endotherm were found for PES. The crystallization exotherm was ascribed to the recrystallization of the melt of the crystallites with low thermal stability, and the shoulder was considered to be the melting endotherm of the crystallites with high thermal stability. The final melting endotherm was ascribed to the melting of the crystallites formed through the reorganization of the crystallites with high thermal stability during the DSC heating process. TMDSC experiments gave the direct evidences to support the proposed models to explain the melting behaviour of PBSU and PES crystallized nonisothermally from the melt.     

Radiation effects on poly(lactic acid)

The effect of γ-irradiation on poly(lactic acid), PLA, synthesized by the solution polymerization of lactic acid in air and N₂ atmosphere, is studied. From the intrinsic viscosity and average molecular weight data of γ-irradiated samples, radiation chemical yields G(s) and G(x) for chain scission and crosslinking respectively were determined. Results indicate that the presence of air causes a decrease in both chain scission and crosslinking. Furthermore, the melting temperature decreased with dose and by using the Flory equation, the value of G (crystalline units) was estimated in air and N₂ atmosphere as 19 and 14 respectively.     

Improved synthesis of oxymethylene-linked poly(oxyethylene)

Polyethylene glycol 400 was reacted with CH₂Cl₂ in the presence of KOH to form oxymethylene-linked chains. The method gave a high yield of colourless high-molecular-weight elastomer. The ionic conductivity of a mixture of the polymer with LiCF₃SO₃ ([O]/[Li] = 25) was about 5 × 10^?5S cm^?1 at 25°C.     

Thermal stability of poly(trimethylene terephthalate)

The first-order thermal degradation rates of poly(trimethylene terephthalate) [PTT] at 240-280 °C under non-oxidative conditions have been determined from the increase in allyl endgroups (¹H NMR) which closely match the rates determined from the decrease in molecular weight (intrinsic viscosity). Consequently, the predominant thermal degradation mechanism of PTT is consistent with concerted, electrocyclic oxo retro-ene chain cleavage under conditions pertinent to viable polymerization processes and efficient downstream extrusion and spinning into fiber. Although catalysts, additives and other reaction variables can influence the thermo-oxidative stability of polyesters including PTT, these factors have been found to have little or no effect on PTT thermal degradation rates under non-oxidative environments. The thermal stability of poly(butylene terephthalate) [PBT] has also been determined from butenyl endgroups (NMR) and molecular weight (IV). The activation energies (E_a) for both PTT and PBT thermal chain cleavage are similar to the reported E_as for poly(ethylene terephthalate) [PET] degradation, which is further supported by semi-empirical molecular orbital calculations on model compounds. However, both PTT and PBT undergo molecular weight decrease faster than PET. The apparent slower chain cleavage of PET is attributed to the contribution of productive chain propagation reactions due to unstable vinyl endgroups which alters the equilibrium stoichiometry compared to the relatively stable endgroups of PTT and PBT.     

Polymer micelle-like aggregates of novel amphiphilic biodegradable poly(asparagine) grafted with poly(caprolactone)

Novel amphiphilic graft copolymers composed of poly(asparagine) (PAsn) as the hydrophilic backbone and poly(caprolactone) (PCL) as the hydrophobic segment were successfully synthesized by grafting PCL-HMDs to poly(succinimde). After tosylating PCL-diol with p-toluenesulfonylchloride (TsCl), tosylated poly(caprolactone) (PCL-OTs) was then reacted with hexamethylenediamine (HMD). The reaction of the amine terminated PCL with poly(succinimide) (PSI) and the following aminolysis resulted in poly(aspargine)-graft-poly(caprolactone) (PAsn-g-PCL). The degree of substitution (DS) and grafting reaction was confirmed by ¹³C NMR, FT-IR spectroscopy and elemental analysis. X-ray diffraction and DSC thermogram showed that the crystalline domain originated from PCL became apparent with an increase of DS. The amphiphilic comb-type graft polymer formed self-aggregates in aqueous solution when precipitated and dialysed against distilled water. Strong hydrophobic interaction of associated PCL grafts facilitated primary aggregate formation with DS, significantly reducing critical aggregation concentration and secondary aggregates also appeared in DLS measurements. Self-aggregates showed a bimodal size distribution originated from the self-aggregation and kinetically controlled particle aggregation, although the smaller primary aggregates was predominant. Spherical and dispersed aggregates of about 20 nm in diameter were observed by a transmission electron microscope.     

Spectroelectrochemical study of a soluble derivative of poly(aniline) in a room temperature ionic liquid

Poly(phenylene sulfide phenyleneamine), PPSA, is a soluble copolymer of poly(aniline) and poly(phenylene sulfide). Its electrochemical behavior has already been studied in both aqueous and organic media in the presence of different electrolytes, where it was observed the loss of electroactivity after few cycles. In this paper, the spectroelectrochemical characterization of PPSA films in a room temperature ionic liquid (RTIL), 1-butyl-2,3-dimethylimidazolium bis(trifluoromethanes sulfonyl)imide (BMMITFSI), is shown. The electrochemical response of a PPSA modified electrode in BMMITFSI is different from that obtained in organic solvent/salt systems. In RTIL, two reversible redox processes were observed and they were assigned to the reversible radical cation/dication transition based on “in situ” UV-vis and Raman spectroscopic studies. The stabilization of the dicationic species in RTIL is an explanation for the reversible electrochemical response of the PPSA in BMMITFSI; on the contrary, when the electrochemical oxidation is carried out in conventional organic electrolytes, once the oxidation of the sulfur atom occurs, a loss of electroactivity is observed being not possible to recover the pristine state of the polymer. FTIR and XRD data obtained for the fully oxidized polymer in acetonitrile are consistent with the formation of a networked polymer due to the electrophilic attack of the positive sulfur atom on the activated aromatic rings. It is not the case in RTIL due to the shielding of the charged sulfur atoms avoiding its reaction to other chains to form the networked polymeric matrix.     

Controlled degradation of poly(ethyl cyanoacrylate-co-methyl methacrylate) (PECA-co-PMMA) copolymers

Copolymers of poly(ethyl cyanoacrylate-co-methyl methacrylate) (PECA-co-PMMA) with various compositions were synthesized by free radical bulk polymerization in an effort to control degradation and stability as well as glass transition temperature to overcome intrinsic poor processability of the poly(ethyl cyanoacrylate) (PECA) homopolymer. The copolymers were found to have an alternating random tendency, which was responsible for the efficient inhibition of the unzipping degradation from the polymer chain. Consequently, the stability of the copolymers at elevated temperature and in solution was significantly improved compared to the PECA homopolymer. The glass transition temperatures of the copolymers were lowered by the incorporation of the methyl methacrylate (MMA), thereby further widening the operating temperature range of the polymer. On the other hand, the copolymer films exhibited hydrolytic degradation in phosphate buffered saline (PBS) solution at 37 °C, which is promising for their use as novel biomaterials.     

A study of blending and complexation of poly(acrylic acid)/poly(vinyl pyrrolidone)

Poly(acrylic acid) (PAA) and poly(vinyl pyrrolidone) (PVP) were chosen to prepare polymer complex and blends. The complex was prepared from ethanol solution and the blends were prepared from 1-methyl-2-pyrrolidone solution. DSC results show that the T_gs of the PAA/PVP blends lie between those of the two constituent polymers, whereas T_g of the PAA/PVP complex is higher than both blends and the two constituent polymers. TGA results show that degradation temperature, T_d, of PAA increases upon adding PVP in the blend, but thermal stability of the complex is higher than that of the blends as reflected by the higher T_d. Both FTIR and high-resolution solid state NMR show strong hydrogen bonding between PAA and PVP by showing significant chemical shift. The T_1ρ(H) measurement shows that the homogeneity scale for the blend is at ∼20 Å and that for the complex is ∼15 Å.     

Intermolecular interaction in aqueous solution of binary blends of poly(acrylamide) and poly(ethylene glycol)

The interaction between poly(acrylamide) (PAM) and poly(ethylene glycol) (PEG) in their solid mixture was studied by Fourier transform infrared spectroscopy (FTIR); and their interaction in aqueous solution was investigated by nuclear magnetic resonance spectroscopy (NMR). For the solid PAM/PEG mixtures, an induced shift of the >C?O and >N? H in amide group was found by FTIR. These results could demonstrate the formation of intermolecular hydrogen bonding between the amide group of PAM and the ether group of PEG. In the aqueous PAM/PEG solution system, the PAM and PEG associating with each other in water, i.e., the amide group of PAM interacting with the ether group of PEG through hydrogen bonding was also found by ¹H NMR. Furthermore, the effects of different molecular weight of PAM on the strength of hydrogen bonding between PAM and PEG in water were investigated systemically. It was found that the hydrogen bonding interaction between PAM and PEG in water did not increase with the enlargement of the PAM molecular weight as expected. This finding together with the viscosity reduction of aqueous PAM/PEG solution with the PAM molecular weight increasing strongly indicated that PAM molecular chain, especially having high molecular weights preferred to form spherical clews in aqueous PEG solution. Therefore, fewer amide groups in PAM could interact with the ether groups in PEG. Based on these results, a mechanism sketch of the interaction between PAM and PEG in relatively concentrated aqueous solution was proposed. The fact that the phase separation of aqueous PAM/PEG solution occurs while raising the temperature indicates that this kind of hydrogen bonding between PAM and PEG in water is weak and could be broken by controlling the temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Miscibility of C60-end-capped poly(ethylene oxide) with poly(vinyl chloride)

The miscibility of blends of single [60]fullerene (C₆₀)-end-capped poly(ethylene oxide) (FPEO) or double C₆₀-end-capped poly(ethylene oxide) (FPEOF) with poly(vinyl chloride) (PVC) has been studied. Similar to poly(ethylene oxide) (PEO), both FPEO and FPEOF are also miscible with PVC over the entire composition range. X-ray photoelectron spectroscopy showed the development of a new low-binding-energy Cl2p doublet and a new high-binding-energy O1s peak in FPEO/PVC blends. The results show that the miscibility between FPEO and PVC arises from hydrogen bonding interaction between the α-hydrogen of PVC and the ether oxygen of FPEO. From the melting point depression of PEO, FPEO or FPEOF in the blends, the Flory-Huggins interaction parameters were found to be −0.169, −0.142, −0.093 for PVC/PEO, PVC/FPEO and PVC/FPEOF, respectively, demonstrating that all the three blend systems are miscible in the melt. However, the incorporation of C₆₀ slightly impairs the interaction between PEO and PVC.     

Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)

Plasticization of semicrystalline poly(l-lactide) (PLA) with a new plasticizer - poly(propylene glycol) (PPG) is described. PLA was plasticized with PPG with nominal M_w of 425 g/mol (PPG4) and 1000 g/mol (PPG1) and crystallized. The plasticization decreased T_g, which was reflected in a lower yield stress and improved elongation at break. The crystallization in the blends was accompanied by a phase separation facilitated by an increase of plasticizer concentration in the amorphous phase and by annealing of blends at crystallization temperature. The ultimate properties of the blends with high plasticizer contents correlated with the acceleration of spherulite growth rate that reflected accumulation of plasticizer in front of growing spherulites causing weakness of interspherulitic boundaries. In PLA/PPG1 blends the phase separation was the most intense leading to the formation of PPG1 droplets, which facilitated plastic deformation of the blends that enabled to achieve the elongation at break of about 90-100% for 10 and 12.5 wt% PPG1 content in spite of relatively high T_g of PLA rich phase of the respective blends, 46.1-47.6 °C. Poly(ethylene glycol) (PEG), long known as a plasticizer for PLA, with nominal M_w of 600 g/mol, was also used to plasticize PLA for comparison.     

Photooxidative degradation of carboxylated poly(vinyl chloride)

Thin films of poly(vinyl chloride), PVC, and carboxylated poly(vinyl chloride), C-PVC, containing 1.8% of carboxyl groups were exposed to high energy ultraviolet radiation (λ = 254 nm) in laboratory conditions. The photochemical reactions in irradiated samples were studied by FTIR and UV–Vis spectroscopy, gel permeation chromatography and gravimetric estimation of insoluble gel. It was found that photodegradation and photocrosslinking in C-PVC is accelerated, whereas photodehydrochlorination is retarded comparing to these processes in PVC. Photooxidation investigated on the base of reaction leading to formation of hydroxyl groups is also more efficient in modified PVC. However, the total amount of carbonyl groups is much lower in UV-irradiated C-PVC than that in PVC. It indicates that competitive reactions (destruction of carboxyl groups and formation of new carbonyls) occur simultaneously in C-PVC chains. The influence of carbonyl groups on photochemical processes can be explained by an efficient Norrish I and II reactions as well as by energy transfer from absorbing species to weak chemical bonds.     

Synthesis and properties of polymer brush consisting of poly(phenylacetylene) main chain and poly(dimethylsiloxane) side chains

A novel polymer brush consisting of poly(phenylacetylene) (PPA) main chain and poly(dimethylsiloxane) (PDMS) side chains was synthesized by the polymerization of phenylacetylene-terminated PDMS macromonomer (M-PDMS). The macromonomer was prepared by the esterfication of monohydroxy-ended PDMS (PDMS-OH, degree of polymerization (DP) = 42) with p-ethynylbenzoic acid. The polymerization of M-PDMS using [(nbd)RhCl]₂/Et₃N catalyst led to polymer brush, poly(M-PDMS), with M_n up to 349?000 (DP of main chain 104). Poly(M-PDMS) with narrow molecular weight distribution (M_n = 39?900, M_w/M_n = 1.11) was obtained with a vinyl-Rh catalyst, [Rh{C(Ph)CPh₂}(nbd){P(4-FC₆H₄)₃}]/(4-FC₆H₄)₃P. Poly(M-PDMS)s were brown to orange viscous liquids and soluble in organic solvents such as toluene and CHCl₃. The UV-vis absorptions of poly(M-PDMS) were observed in the range of 350-525 nm, which are attributable to the PPA main chain.     

Orientation relaxation study on poly(ethylene oxide)-poly(vinyl phenol) blends by polarization modulation infrared linear dichroism

Orientation relaxation in miscible poly(vinyl phenol) (PVPh)-poly(ethylene oxide) (PEO) blends (from 25 to 40 wt% PEO) was investigated using polarization modulation infrared linear dichroism. This blend was selected to study the effect of strong hydrogen bonds on relaxation. The results show that PEO is more oriented than PVPh, and remains so throughout the experimental relaxation time. Relaxation proceeds in three stages. PVPh relaxation is systematically faster than that of PEO, while PEO relaxation times increase steadily with increasing PEO content. For PVPh, a maximum in relaxation times is observed around 30 wt% PEO. Relaxation coupling occurs for concentrations in PEO lower than 30 wt%, is marginal for the 35 wt% and clearly absent for the 40 wt% PEO blend. By comparison with previous rheology and near-infrared data, it can be concluded that hydrogen bonds do not automatically insure cooperativity during relaxation: for cooperativity to occur, the minor component of the blend must interact preferentially with the major component. This is the case of PVPh-rich compositions, but not for PEO-rich compositions (for 35 and 40 wt% PEO), for which the minor PVPh constituent interacts strongly with both PEO and other PVPh chains.     

Swelling and morphological properties of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) hydrogels in solution with high salt concentration

Understanding the swelling properties of hydrogels and how they affect the hydrogel's morphology is of fundamental importance in the development of hydrogel-based artificial muscles, bio-actuators, sensors and other devices. In this paper, the swelling behavior of PVA-PAA hydrogel films in saline water and in buffer solutions of different pH values was investigated. It was observed that the swelling factor of the hydrogel decreases when the ionic strength of the solvent solution increases. Scanning Electron Microscopy (SEM) revealed structures with different pore shapes and sizes depending on the type of solution used for hydration. In saline water, Energy Dispersive X-Ray (EDS) analysis indicated the formation of NaCl crystals within the polymeric network. Finally, the PVA-PAA hydrogel was used as an actuator to strain a fiber Bragg grating sensor, thus providing an indirect measurement of the pH value of the surrounding solution.     

Electrochemical synthesis of Pd particles on poly(vinylferrocenium)

Electrochemical synthesis of Pd particles on poly(vinylferrocenium) (PVF⁺) support was described. K₂PdCl₄ was used as the metal particle precursor. Pd particles were incorporated into the polymer matrix electrochemically either by cyclic voltammetric scans (between +1.0 V and −0.8 V vs. SCE) or by reduction at constant potential (at −0.8 V vs. SCE) from aqueous solution of K₂PdCl₄. Scanning electron microscopy (SEM) studies showed that the Pd particles were well dispersed in the polymer matrix. Experimental parameters such as polymer film thickness, number of cycles during cyclic voltammetric scans in K₂PdCl₄ and electrolysis time in K₂PdCl₄ were studied. The Pd/PVF⁺ system showed catalytic activity towards hydrazine oxidation and appreciable results were obtained when compared with the related studies.