Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

The synthesis of ABC triblock copolymer poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene (PEO-b-PMMA-b-PS) via atom transfer radical polymerization (ATRP) is reported. First, a PEO-Br macroinitiator was synthesized by esterification of PEO with 2-bromoisobutyryl bromide, which was subsequently used in the preparation of halo-terminated poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) diblock copolymers under ATRP conditions. Then PEO-b-PMMA-b-PS triblock copolymer was synthesized by ATRP of styrene using PEO-b-PMMA as a macroinitiator. The structures and molecular characteristics of the PEO-b-PMMA-b-PS triblock copolymers were studied by FT-IR, GPC and ¹H NMR.     

Synthesis and characterization of poly(ethylene glycol)-b-poly (l-lactide)-b-poly(l-glutamic acid) triblock copolymer

A biodegradable amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-glutamic acid) (PEG-b-PLLA-b-PLGA) was obtained by catalytic hydrogenation of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(γ-benzyl-l-glutamic acid) (PEG-b-PLLA-b-PBLGA) synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with amino-terminated MPEG-b-PLLA-NH₂ as a macroinitiator. MPEG-b-PLLA-NH₂ converted from MPEG-b-PLLA-OH first reacted with tert-Butoxycarbonyl-l-phenylalanine (Phe-^NBOC) and dicyclohexylcarbodiimide (DCC) and then deprotected the tert-butoxycarbonyl group. MPEG-b-PLLA-OH was prepared by ROP of l-lactide with monomethoxy poly(ethylene glycol) in the presence of stannous octoate. The triblock copolymer and its diblock precursors were characterized by ¹H NMR, FTIR, GPC and DSA (drop shape analysis) measurements. The lengths of each block polymers could be tailored by molecular design and the ratios of feeding monomers. The triblock polymer PEG-b-PLLA-b-PLGA containing carboxyl groups showed obviously improved hydrophilic properties and could be a good potential candidate as a drug delivery carrier.     

A new approach in the study of tethered diblock copolymer surface morphology and its tethering density dependence

A poly(l-lactic acid)-block-polystyrene-block-poly(methyl methacrylate) (PLLA-b-PS-b-PMMA) triblock copolymer was synthesized with a crystalline PLLA end block. Single crystals of this triblock copolymer grown in dilute solution could generate uniformly tethered diblock copolymer brushes, PS-b-PMMA, on the PLLA single crystal substrate. The diblock copolymer brushes exhibited responsive, characteristic surface structures after solvent treatment depending upon the quality of the solvent in relation to each block. The chemical compositions of these surface structures were detected via the surface enhanced Raman scattering technique. Using atomic force microscopy, the physical morphologies of these surface structures were identified as micelles in cyclohexane and “onion”-like morphologies in 2-methoxyethanol, especially when the PS-b-PMMA tethered chains were at low tethering density.     

Self-assembly of an A-B diblock copolymer blended with a C homopolymer and a C-D diblock copolymer through hydrogen bonding interaction

In this study, we investigated the miscibility, phase behavior, and self-assembled nanostructures formed from the immiscible crystalline-amorphous diblock copolymer poly(?-caprolactone-b-4-vinyl pyridine) (PCL-b-P4VP, A-B) when blended with the homopolymer poly(vinyl phenol) (PVPh, C) and the diblock copolymer poly(vinyl phenol-b-styrene) (PVPh-b-PS, C-D). Long-range-ordered microphase separation was difficult to achieve in the PCL-b-P4VP/PVPh (A-B/C) blend system because PVPh interacted with both the P4VP and PCL blocks simultaneously through hydrogen bonding interactions. In contrast, we observed sharp, multiple orders of diffraction in the SAXS profiles of the PCL-b-P4VP/PVPh-b-PS (A-B/C-D) blend system, indicating that perfect microphase separation occurred because the incorporation of the PS block induced the PVPh block to hydrogen bond preferentially with the P4VP block. This simple A-B/C-D (PCL-b-P4VP/PVPh-b-PS) diblock copolymer mixture exhibited self-assembly behavior (a three-lamella phase) similar to that of a corresponding ABC triblock copolymer.     

Synthesis of thermoresponsive poly(N-isopropylmethacrylamide) and poly(acrylic acid) block copolymers via post-functionalization of poly(N-methacryloxysuccinimide)

Polymers exhibiting a thermoresponsive, lower critical solution temperature (LCST) phase transition have proven to be useful for many applications as “smart” or “intelligent” materials. A series of poly(N-isopropylmethacrylamide) (PNIPMAM) polymer, poly(N-isopropylmethacrylamide)-b-poly(acrylic acid) (PNIPMAM-b-PAA) diblock, and poly(acrylic acid)-b-poly(N-isopropylmethacrylamide)-b-poly(acrylic acid) (PAA-b-PNIPMAM-b-AA) triblock copolymer samples were synthesized via ATRP. A facile post-functionalization route was developed that uses an activated ester functionality to convert poly(N-methacryloxysuccinimide) (PMASI) blocks to LCST capable polyacrylamide, while poly(t-butyl acrylate) (PtBA) blocks were converted to water-soluble poly(acrylic acid) (PAA). The post-functionalization was monitored via ¹H NMR and ATR-FTIR. The aqueous solution properties were explored and the PNIPMAM polymers were shown to have a LCST phase transition varying from 35 to 60 °C. The ability to synthesize block copolymers that are thermoresponsive and water-soluble will be of great benefit for broader applications in drug delivery, bioengineering, and nanotechnology.     

Synthesis of ABA triblock copolymer of poly(potassium acrylate-styrene-potassium acrylate) by atom transfer radical polymerization and the self-assembly in selective solvents

A series of well-defined ABA triblock copolymers of poly(methyl acrylate)-polystyrene-poly(methyl acrylate) (PMA-b-PS-b-PMA) with different molecular weights were synthesized using Cl-PS-Cl as macroinitiator, CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system via atom transfer radical polymerization (ATRP). Amphiphilic triblock copolymer poly(potassium acrylate)-polystyrene-poly(potassium acrylate) (PKAA-b-PS-b-PKAA) was obtained by hydrolyzing PMA-b-PS-b-PMA. The self-assembly behavior of the triblock copolymers in organic solutions, which is a good solvent for the PS block and in aqueous solutions, which is a good solvent for the PKAA blocks was studied by high performance particle sizer (HPPS). The results showed that the Z-average size of the micelles obviously increases with increase in molecular weight of triblock copolymers, and the micelles in organic solutions are relatively more stable than in aqueous solutions. The effect of the length of PS block on the Z-average size of the micelles is more obvious in organic solution than in aqueous solution. The morphology of triblock copolymers PKAA-b-PS-b-PKAA in aqueous solution, which is a nearly ‘pearl-necklace’-like shape, was examined by transmission electron microscopy (TEM) at room temperature.     

Double-brush Langmuir-Blodgett monolayers of α-helical diblock copolypeptides

The synthesis of amphiphilic diblock copolypeptides consisting of poly(α-l-glutamic acid) (PLGA) and poly(γ-methyl-l-glutamate-ran-γ-stearyl-l-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) and their monolayer behavior at the air-water interface have been studied. PLGA-b-PMLGSLG was synthesized via a diblock copolymer precursor consisting of poly(γ-tert-butyl-l-glutamate) (PtBuLG) and PMLGSLG blocks, with the tert-butyl group as a mild acid-labile protecting group for the carboxylic acid. The polymerization conditions were found to influence the α-helix to β-sheet content ratio and can be tuned to significantly enhance the diblock copolypeptide helicity. Purely α-helical PtBuLG-b-PMLGSLG diblock copolymers were successfully prepared. After removal of the tert-butyl group, the study of the PLGA-b-PMLGSLG amphiphilic diblock copolymers in Langmuir monolayers and Langmuir-Blodgett films demonstrated the formation of a stable α-helical double-brush structure, with the helices tilted away from the substrate surface. These double-brush monolayers combine the unique properties arising from the unidirectionally aligned helix macrodipole and the liquid-like features of the side chain mantle of the PMLGSLG block. Such systems are promising for thin film applications requiring incorporation and orientation of bio- and optical molecules.     

RAFT polymerization of temperature- and salt-responsive block copolymers as reversible hydrogels

Reversible-addition fragmentation chain transfer (RAFT) polymerization enabled the synthesis of novel, stimuli-responsive, AB and ABA block copolymers. The B block contained oligo(ethylene glycol) methyl ether methacrylate (OEG) and was permanently hydrophilic in the conditions examined. The A block consisted of diethylene glycol methyl ether methacrylate (DEG) and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TMA). The A block displayed both salt- and temperature-response with lower critical solution temperatures (LCSTs) dependent on the molar content of TMA and the presence of salt. Higher TMA content in the AB diblock copolymers increased the critical micelle temperatures (CMT) in HPLC-grade water due to an increased hydrophilicity of the A block. Upon addition of 0.9 wt% NaCl, the CMTs of poly(OEG-b-DEG₉₅TMA₅) decreased from 50 °C to 36 °C due to screening of electrostatic repulsion between the TMA units. ABA triblock copolymers displayed excellent hydrogel properties with salt- and temperature-dependent gel points. TMA incorporation in the A block increased the gel points for all triblock copolymers, and salt-response increased with higher TMA composition in the A block. For example, poly(DEG₉₈TMA₂-b-OEG-b-DEG₉₈TMA₂) formed a hydrogel at 40 °C in HPLC-grade water and 26 °C in 0.9 wt% NaCl aqueous solution. These salt- and temperature-responsive AB diblock and ABA triblock copolymers find applications as drug delivery vehicles, adhesives, and hydrogels.     

Analysis of poly(ethylene oxide)-b-poly(propylene oxide) block copolymers by MALDI-TOF mass spectrometry using collision induced dissociation

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was used to analyse the block length of commercially available block copolymers of poly(ethylene oxide) and poly(propylene oxide) (PEO-b-PPO) based on the fragmentation behaviour in collision induced dissociation (CID) experiments.MALDI-CID-TOF² analysis is a complex procedure depending on a number of different experimental parameters. Therefore, a step-by-step procedure was used starting with PEG and PPG standards, PEG-PPG blends and endgroup-functionalized PPGs, to understand the fragmentation behaviour of the different species. These results showed that characteristic fragment patterns of the homopolymers and PEG-PPG mixtures can be obtained that facilitate the interpretation of the fragment spectra of PEO-b-PPO di- and triblock copolymers. It was found that di- and triblock copolymers can be differentiated by their fragment spectra. In addition, the sequence of monomer units in the diblock copolymers could be determined.     

Synthesis of cationic amphiphilic diblock copolymers of poly(vinylbenzyl triethylammonium chloride) and polystyrene by reverse iodine transfer polymerization (RITP)

A new method called reverse iodine transfer polymerization (RITP), based on the in situ generation of transfer agents using molecular iodine I₂, was applied to the synthesis of poly(vinylbenzyl chloride). Well-defined diblock copolymers poly(vinylbenzyl chloride)-b-polystyrene with different chain lengths were then successfully produced through sequential polymerization of styrene. The polydispersity index values M_w/M_n ranged from 1.4 to 1.6 for all the homopolymers and diblock copolymers. The diblock copolymers could be synthesized with equally good results by starting with either poly(vinylbenzyl chloride) or polystyrene as macrotransfer agents. The diblock copolymers were then quaternized with triethylamine to prepare cationic amphiphilic diblock copolymers.     

Functionalization of amphiphilic coil-rod-coil triblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine) with florescence moiety and C60

We recently achieved quantitative synthesis of an amphiphilic coil-rod-coil triblock copolymer, poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine), by coupling in situ living diblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate) (P2VP-b-PHIC) using malonyl chloride in the presence of pyridine. This led to the introduction of an active methylene group that is a site for further functionalization in the rod block. The Michael addition reaction of the triblock copolymer with 7-(4-trifluoromethyl) coumarin acrylamide led to copolymer bearing a fluorescent pendent in the rod block. The fluorescent labeled copolymers were isolated in ∼94% yields. Similarly C₆₀ pendent was introduced to the rod block by the Bingel reaction. The yields of C₆₀ functionalized copolymers were ∼54%. The precursor and functionalized amphiphilic coil-rod-coil copolymer show diverse morphologies, such as micelles and vesicles by simply changing the solvent. For the C₆₀ functionalized block copolymer, structural constraints in micelles and vesicles prevented C₆₀ pendents to aggregate.     

Thermal and mechanical properties of microcellular thermoplastic SBS/PS/SBR blend: effect of crosslinking

This study investigates the effect of peroxide crosslinking on the structure and mechanical properties for SBS/PS/SBR foams composed of polystyrene (PS), poly(styrene-b-butadiene) diblock copolymer (SBR-1502), and poly(styrene-b-butadiene-b-styrene) triblock copolymer (SBS). The cell size and its distribution of SBS/PS/SBR foams were investigated by SEM images, showing the smaller and denser of hollow cells for the SBS/PS/SBR foam containing the higher concentration of DCP (dicumyl peroxide). As expected, the density of the SBS/PS/SBR foams increases with increasing the content of DCP. The high density of polymeric foams exhibits the high mechanical properties such as hardness, shrinkage, tensile strength, tear strength, elongation at break, and compression set.     

Surface microphase separation in PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films

Well‐defined poly(dimethylsiloxane)‐block‐poly(methyl methacrylate)‐block‐poly(2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) (PDMS‐b‐PMMA‐b‐PHFBMA) triblock copolymers were synthesized via atom transfer radical polymerization (ATRP). Surface microphase separation in the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films was investigated. The microstructure of the block copolymers was investigated by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Surface composition was studied by X‐ray photoelectron spectroscopy (XPS). The chemical composition at the surface was determined by the surface microphase separation in the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films. The increase of the PHFBMA content could strengthen the microphase separation behavior in the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films and reduce their surface tension. Comparison between the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymers and the PDMS‐b‐PHFBMA diblock copolymers showed that the introduction of the PMMA segments promote the fluorine segregation onto the surface and decrease the fluorine content in the copolymers with low surface energy. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Dissipative particle dynamics study on the multicompartment micelles self-assembled from the mixture of diblock copolymer poly(ethyl ethylene)-block-poly(ethylene oxide) and homopolymer poly(propylene oxide) in aqueous solution

Dissipative particle dynamics (DPD) method is applied to model the self-assembly of diblock copolymer poly(ethyl ethylene)-block-poly(ethylene oxide) (PEE-b-PEO) and homopolymer poly(propylene oxide) (PPO) in aqueous solution. In this study, several segments are coarse-grained into a single simulation bead based on the experimental density. For the self-assembly of pure diblock copolymer PEE-b-PEO in dilute solution, the DPD simulation results are in good agreement with experimental data of micelle morphologies and sizes. The chain lengths of the block copolymers and the volume ratios between PPO and PEE-b-PEO are varied to find the conditions of forming multicompartment micelles. The micelles with core-shell-corona structure and the micelles with two compartments are both formed from the mixture of PEE-b-PEO and PPO in aqueous solution.     

Synthesis of poly(ɛ-caprolactone-b-isobutylene) diblock copolymer and poly(ɛ-caprolactone-b-isobutylene-b-ɛ-caprolactone) triblock copolymer

Summary Poly(isobutylene-b-ɛ-caprolactone) diblock and poly(ɛ-caprolactone-b-isobutylene-b-ɛ-caprolactone) triblock copolymers have been prepared and characterized. The synthesis involved the living cationic polymerization of IB, followed by capping with 1,1-diphenylethylene or 1,1-p-ditolylethylene and end-quenching with 1-methoxy-1-trimethylsiloxy-2-methyl-propene to yield methoxycarbonyl functional PIB. Hydroxyl end-functional PIB polymers were quantitatively obtained by the subsequent reduction of methoxycarbonyl end-functional PIB with LiAlH₄. The structure of hydroxyl end-functional PIBs was confirmed by ¹H NMR and IR spectroscopy. Poly(ɛ-caprolactone-b-isobutylene) diblock copolymers and poly(ɛ-caprolactone-b-isobutylene-b-ɛ-caprolactone) triblock copolymers were synthesized by the living cationic ring-opening polymerization of ɛ-caprolactone with hydroxyl end-functional PIB as macroinitiator in the presence of HCl•Et₂O via the “activated monomer mechanism”. The block copolymers exhibited close to theoretical M_ns and narrow molecular weight distributions. Received: 30 January 2002/Revised version: 19 February 2002/ Accepted: 19 February 2002     

Crosslinkable surfactants based on linoleic acid-functionalized block copolymers of ethylene oxide and ε-caprolactone for the preparation of stable PMMA latices

Amphiphilic diblock and triblock copolymers consisting of poly(ethylene oxide) (PEO) as (central) hydrophilic segment and poly(ε-caprolactone) (PCL) as hydrophobic segment(s) were prepared by ring opening polymerization. The length of the PEO segment was kept constant , whereas the length of the PCL block(s) was either 6 or 10 units for diblock copolymers and 3 or 5 units at each end for the triblock copolymers. These block copolymers were end-functionalized by esterification with linoleic acid (LA), which contains reactive double bonds. The autoxidative behavior of PEO₄₅-(CL₃-LA)₂ functionalized triblock copolymers was investigated by exposure of films to air at ambient conditions. Ninety percent of the double bonds had disappeared in 15 d and a crosslinked structure was obtained after 30 d. Critical micelle concentrations (CMC) of the crosslinkable surfactants were in the range of 0.08-0.19 mmol/l for the diblock copolymer and of 0.19-0.26 mmol/l for the triblock copolymer. The surface tension of aqueous surfactant solutions at the CMC (γ_CMC) (25 °C) varied from 47.1 to 51.4 mN/m for the diblock and from 45.6 to 48.1 mN/m for the triblock systems. For both systems CMC and γ_CMC increase with increasing HLB values. These surfactants were used in PMMA latex preparations. The latices of PMMA prepared with LA-functionalized diblock and triblock copolymers yielded narrow particle size distributions and particle sizes of 180 and 370 nm, respectively, whereas latices prepared with SDS had a particle size of 90 nm. After extraction of the latex particles with methanol, the amounts of the unextractable (either buried or copolymerized) LA-functionalized diblock and triblock copolymers found in extracted PMMA latex particles were 10 and 24% of the initial amount of surfactant added respectively. Control experiments with a stearic acid (SA) containing diblock copolymer showed that the amount of buried surfactant in PMMA latices was 6.5%. By comparing the overall latex characteristics and stability (shelf stability, freeze-thaw testing and addition of electrolyte solutions and ethanol) it was concluded that an LA-functionalized diblock copolymer (MPEO₄₅-CL₁₀-LA) gave better stabilization of PMMA latices than an LA-functionalized triblock copolymer of comparable composition and HLB value.     

Well-defined phosphonated homo- and copolymers via direct ring opening metathesis polymerization

Phosphonated polymers with a well-defined molecular weight, composition and architecture have been prepared via ring opening metathesis polymerization (ROMP) of phosphonated and non-phosphonated norbornene imides at room temperature for the first time. ROMP was proven to be living and versatile. This enabled preparation of a broad range of phosphonated homopolymers, statistical copolymers, AB diblock as well as ABA and BAB triblock copolymers based on poly(norbornene imide)s with low polydispersity (1.09–1.32). Complete hydrolysis of phosphonated poly(norbornene imide)s under mild conditions yielded the phosphonic acid derivatives. Thermogravimetric analysis indicated high thermal and thermo-oxidative stability of the polymers. Free standing and transparent films with good mechanical stability were obtained from the phosphonic acid functional homopolymers, diblock and triblock copolymers. Combining these basic properties with the advantages mentioned above makes ROMP a promising pathway for accessing a wide diversity of phosphonated macromolecular structures. These new phosphonated polymers will open new perspectives in advanced application areas, which require a high level of control over polymer structure.     

Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy

A new set of block copolymers containing poly(methyl vinyl ether) (PMVE) on one hand and poly(tert-butyl acrylate), poly(acrylic acid), poly(methyl acrylate) or polystyrene on the other hand, have been prepared by the use of a novel dual initiator 2-bromo-(3,3-diethoxy-propyl)-2-methylpropanoate. The dual initiator has been applied in a sequential process to prepare well-defined block copolymers of poly(methyl vinyl ether) (PMVE) and hydrolizable poly(tert-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA) or polystyrene (PS) by living cationic polymerization and atom transfer radical polymerization (ATRP), respectively. In a first step, the Br and acetal end groups of the dual initiator have been used to generate well-defined homopolymers by ATRP (resulting in polymers with remaining acetal function) and living cationic polymerization (PMVE with pendant Br end group), respectively. In a second step, those acetal functionalized polymers and PMVE-Br homopolymers have been used as macroinitiators for the preparation of PMVE-containing block copolymers. After hydrolysis of the tert-butyl groups in the PMVE-b-ptBA block copolymer, PMVE-b-poly(acrylic acid) (PMVE-b-PAA) is obtained. Chain extension of the AB diblock copolymers by ATRP gives rise to ABC triblock copolymers. The polymers have been characterized by MALDI-TOF, GPC and ¹H NMR.     

Formation and properties of multivariant assemblies of surface-tethered diblock and triblock copolymers

We present methodologies for fabricating block copolymer assemblies grafted onto flat solid substrates, where each block of the copolymer possesses a systematic and gradual variation of molecular weight as a function of the position on the substrate. We demonstrate the utility of this technique on two case studies. In the first project, we generate surface-tethered poly[(2-hydroxyethyl methacrylate)-b-(methyl methacrylate)] (PHEMA-b-PMMA) diblock copolymer brushes and study systematically morphological transitions associated with collapsing either the top PMMA or the bottom PHEMA block while keeping the other block solvated. Scanning force microscopy studies of systems having the top block collapsed reveal the presence of either flat (F), or micellar (M) or bicontinuous (BC) morphologies, whose locus in the phase diagram agrees with theoretical predictions and results of computer simulations. The second case study demonstrates the extension of the deposition method to the case of surface-anchored triblock copolymer brushes. Specifically, we present results pertaining to the formation of poly[(2-hydroxyethyl methacrylate)-b-(methyl methacrylate)-b-(dimethylaminoethyl methacrylate)] brushes with independent variation of all three block lengths.     

Self-organized thermosets involving epoxy and poly(?-caprolactone)-block-poly(ethylene-co-ethylethylene)-block-poly(?-caprolactone) amphiphilic triblock copolymer

In this work, we investigated the self-assembly behavior of poly(?-caprolactone)-block-poly(ethylene-co-ethylethylene)-block-poly(?-caprolactone) (PCL-b-PEEE-b-PCL) triblock copolymer in epoxy thermosets. The PCL-b-PEEE-b-PCL triblock copolymer was synthesized via the ring-opening polymerization of ?-caprolactone with a hydroxyl-terminated poly(ethylene-co-ethylethylene) as the macromolecular initiator. The hydroxyl-terminated poly(ethylene-co-ethylethylene) was prepared with the hydrogenation reaction of a hydroxyl-terminated polybutadiene. The triblock copolymer was incorporated into the precursors of epoxy to obtain the nanostructured thermosets. It was found that the self-organized nanophases were formed in the mixture before curing reaction and the nanostructures can be further fixed via curing reaction. The self-assembly behavior of the triblock copolymer in epoxy thermosets was investigated by means of atomic force microscopy (AFM), small-angle X-ray scattering (SAXS) and dynamic mechanical thermal analysis (DMTA). Differential scanning calorimetry (DSC) shows that the formation of the self-organized nanophase in the thermosets caused that a part of poly(?-caprolactone) subchains were demixed from epoxy matrix with the occurrence of curing reaction; the fractions of demixed PCL blocks were estimated according to the T_g-composition relation of the model binary blends of epoxy and PCL.