Synthesis and properties of thermosensitive, crown ether incorporated poly(N-isopropylacrylamide) hydrogel

A crown ether derivative (4′-allyldibenzo-18-crown-6, CE) was covalently incorporated into the network of temperature sensitive poly(N-isopropylacrylamide) (PNIPA) hydrogels by copolymerization in a mixed solvent of water and tetrahydrofuran (H₂O/THF). The poly(N-isopropylacrylamide-co-4′-allyldibenzo-18-crown-6) (poly(NIPA-co-CE)) hydrogels exhibited dramatically faster deswelling rates than normal PNIPA hydrogels at a temperature (50 °C) above their lower critical solution temperatures. The effect of the solvent component ratio in the mixed solvent during the copolymerization on the swelling properties of the poly(NIPA-co-CE) hydrogel was investigated. The thermosensitive poly(NIPA-co-CE) hydrogels have potential applications in the extraction of cations and separation of chiral drugs.     

Rapid pH/temperature-responsive cationic hydrogels with dual stimuli-sensitive grafted side chains

Dual temperature- and pH-sensitive comb-type grafted cationic hydrogels are successfully synthesized by grafting polymeric chains with freely mobile ends, which are composed of both N-isopropylacrylamide (NIPAM) segments and N,N-dimethylamino ethyl methacrylate (DMAEMA) segments, onto the backbone of crosslinked poly(NIPAM-co-DMAEMA) networks. Equilibrium and dynamic swelling/deswelling properties of the prepared hydrogels responding to pH and/or temperature are investigated. The prepared hydrogels demonstrate a lower critical solution temperature (LCST) at about 34 °C and a pK_a value at about pH 7.3. At lower pH and lower temperature, both the swelling degree and the swelling rate of the comb-type grafted hydrogel are larger than those of the normal-type crosslinked hydrogel. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogel exhibits a more rapid deswelling rate than that of the normal-type hydrogel in response to a pH jump from 2.0 to 11.0 at a fixed temperature. The volume changes of the poly(NIPAM-co-DMAEMA) hydrogels are acute in a series of fixed buffer solutions with an abrupt increase of environmental temperature from 18 °C to a temperature higher than the LCST. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogels show quite fast shrinking behaviors in response to simultaneous dual temperature and pH stimuli. Drug-release in vitro from the prepared poly(NIPAM-co-DMAEMA) hydrogels is carried out when the environmental temperature and pH are changed synchronously. The results show that the model drug Vitamin B₁₂ is released much more rapidly from the comb-type grafted hydrogel than that from the normal-type hydrogel. The proposed dual temperature/pH-sensitive comb-type grafted cationic poly(NIPAM-co-DMAEMA) hydrogel in this study may find various potential applications, e.g., for fabricating rapid-response smart sensors, actuators, and chemical/drug carriers and so on.     

A study of hydrogel thermal-dynamics using Fourier transform infrared spectrometer

A rapid and reliable method was presented for studying hydrogel dynamics/kinetics. Two temperature-sensitive hydrogels, poly-N-isopropylacrylamide (poly(NIPAAm)) and the copolymer of N,N-diethylacrylamide and sodium methacrylate (molar ratio=97:3, poly(NDEAAm-co-MAA)) were synthesized. The thermal-behaviors of the gels were studied through the absorbance intensities of both swollen water and gel frame components, and the peak positions of amide band along heating/cooling pathways under dynamic Fourier transform infrared (FTIR) probing. The results showed that the lower critical solution temperature (LCST) of poly(NIPAAm) is about 33-35 °C, which is consistent with reported value of ∼34 °C. Compared to poly(NIPAAm), poly(NDEAAm-co-MAA) has relatively continuous volume phase transition, starting at ∼35 °C and a better thermal-reversibility with similar swelling and deswelling profiles over a larger temperature range (10-80 °C for poly(NDEAAm-co-MAA) vs. 10-33 °C for poly(NIPAAm)). The H-bonding water along phase transition was also studied, showing a less reversibility of poly(NIPAAm) compared to poly(NDEAAm-co-MAA). In addition, FTIR spectrometer was also used to study the volume changes of poly(NDEAAm-co-MAA) under variations in environmental salinity.     

Synthesis of rapid responsive gels comprising hydrophilic backbone and poly(N-isopropylacrylamide) graft chains by RAFT polymerization and end-linking processes

A thermosensitive poly(N-isopropylacrylamide) (PNIPAM) grafted gel, which comprises hydrophilic backbone and freely mobile PNIPAM graft chains, was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and end-linking processes. Functional PNIPAM bearing dithiobenzoate end group (-C(S)S-R) was prepared first, and then it was reacted with divinyl compounds to obtain gel. In order to adjust the composition of the gels, two divinyl compounds, N,N-methylenebisacrylamide (BIS) and poly(ethylene glycol) diacrylate (PEGDAC), were used. The cross-linking polymerization mechanism was proposed. The swelling and deswelling kinetics of the hydrogels were measured. The gels exhibit rapid deswelling kinetics. At the same time, they show rapid swelling kinetics within 30 min, whereas a conventional PNIPAM-co-PEG-co-BIS gel with the same feed composition requires more than 10 h to reach swelling equilibrium.     

Temperature sensitive poly(N-t-butylacrylamide-co-acrylamide) hydrogels: synthesis and swelling behavior

A series of temperature sensitive hydrogels was prepared by free-radical crosslinking copolymerization of N-t-butylacrylamide (TBA) and acrylamide in methanol. N,N′-methylenebis(acrylamide) was used as the crosslinker. It was shown that the swelling behavior of the hydrogels can be controlled by changing the amount of TBA units in the network chains. Hydrogels immersed in dimethylsulfoxide (DMSO)-water mixtures exhibited reentrant swelling behavior, in which the gels first deswell then reswell if the DMSO content of the solvent mixture is continuously increased. In water over the temperature range of 2-64 °C, hydrogels with less than 40[percnt] TBA by mole were in a swollen state while those with TBA contents higher than 60[percnt] were in a collapsed state. Hydrogels with 40-60[percnt] TBA exhibited swelling-deswelling transition in water depending on the temperature. The temperature interval for the deswelling transition of 60[percnt] TBA gel was found to be in the range from 10 to 28 °C, while for the 40[percnt] TBA gel, the deswelling started at about 20 °C and continued until the onset of the hydrolysis of the network chains at around 64 °C. It was shown that the Flory-Rehner theory of swelling equilibrium provides a satisfactory agreement to the experimental swelling data of the hydrogels, provided that the sensitive dependence of the χ parameter on both temperature and polymer concentration is taken into account.     

Thermo-sensitive sol-gel transition of poly(depsipeptide-co-lactide)-g-PEG copolymers in aqueous solution

A series of biodegradable graft copolymers composed of poly(ethylene glycol) side-chains and a poly(depsipeptide-co-dl-lactide) backbone (PDG-dl-LA-g-PEG) were prepared as a novel thermo-gelling system. An aqueous solution of PDG-dl-LA-g-PEG (20 wt%) with a certain PEG length and composition showed instantaneous temperature-sensitive gelation at 33 °C. The sol-gel transition temperature (T_gel) could be controlled from 33 to 51 °C by varying the PEG length and compositions without a decrease in mechanical strength of the hydrogels. The 20 wt% hydrogel was eroded gradually in PBS at 37 °C for 60 days. This research provides a molecular design approach to create biodegradable thermo-gelling polymers with controllable T_gel and mechanical toughness.     

Thermoreversible swelling behaviour of hydrogels based on N-isopropylacrylamide with a hydrophobic comonomer

Hydrogels were prepared by free radical polymerisation in aqueous solution of N-isopropylacrylamide (NIPA) and of NIPA with di-n-propylacrylamide (DPAM), di-n-octylacrylamide (DOAM) or di-dodecylacrylamide (DDAM) as hydrophobic comonomer. N,N-methylene bisacrylamide (BIS) and glyoxal bis(diallyacetal) (GLY) were used as crosslinkers. A series of copolymers with three different comonomer contents was synthesised and for some polymers three different crosslinker concentrations were employed. The swelling equilibrium of these hydrogels was studied as a function of temperature, hydrophobic comonomer species and content in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS). In pure water the gels showed a discontinuous volume phase transition at 33 and 30 °C for PNIPA and hydrophobically modified PNIPA copolymeric hydrogels, respectively. The swelling ratio r and the transition temperature (LCST) increased at low temperatures with the addition of SDS, this is ascribed to the conversion of non-ionic PNIPA gels into polyelectrolyte gels through the binding of SDS. At SDS concentration below 0.5 wt%, gels exhibited a single discontinuous volume transition at 36-38 °C. However, for SDS concentration above 0.5 wt%, two discontinuous volume transitions at 36-40 and 70 °C were observed. Additionally, the replacement of BIS by the novel octafunctional crosslinker glyoxal bis(diallylacetal) (GLY) yielded an increase in the swelling ratio.     

Copolymer hydrogels based on N-isopropylacrylamide and itaconic acid

In this study, the swelling behaviour of copolymer hydrogels of N-isopropylacrylamide (NIPAM) and itaconic acid (IA) in response to temperature and pH value of the external media was studied. The equilibrium degree of swelling for PNIPAM and PNIPAM/IA copolymers was greater at 25 °C than at 37 °C. The degree of swelling was low at low pH values. As the degree of ionization increased above the nominal pK_a values of IA, the increased hydrophilicity resulted in larger degrees of swelling. At 37 °C, the PNIPAM hydrogel and some copolymers show anomalous swelling behaviour, i.e. the overshooting effect, in buffered solutions of certain pH values. A swelling-deswelling study showed that the deswelling process of the hydrogels was faster then the swelling process. According to dynamic swelling studies, the diffusion exponent and the diffusion coefficient both increase with increasing content of IA.     

Super porous organic-inorganic poly(N-isopropylacrylamide)-based hydrogel with a very fast temperature response

Porous organic-inorganic (O-I) hydrogels showing a very fast temperature response, including very fast reswelling were prepared: only 6 s are needed for 72% deswelling (gel collapse) as well as for 72% reswelling. Both deswelling and reswelling are practically complete in 14 s. The gels were prepared from N-isopropylacrylamide (NIPA), N,N′-methylenebisacrylamide (BAA) and tetramethoxysilane (TMOS) by simultaneous radical polymerization and hydrolytic polycondensation of TMOS. The syntheses were carried out at temperatures below the lower critical solution temperature (LCST) of poly(NIPA) in two steps: during the first stage the temperature was held at T = +15 °C and during the second the temperature was lowered below the freezing point of the reaction mixture, T = −18 °C. The ice crystals, which grew during the second stage, served as the pore-forming agent. The best samples were obtained if the second stage was started shortly before the gel point of the reaction mixture. The introduction of the inorganic phase (silica) is necessary for the ability of fast reswelling and also results in a strong improvement of the hydrogels' mechanical properties, while the maximum swelling degree remains nearly unaffected.     

Unusual swelling behavior of polymer-clay nanocomposite hydrogels

The swelling behavior and the elastic properties of nanocomposite hydrogels have been investigated. The hydrogels were prepared by free-radical polymerization of the monomers acrylamide (AAm), N,N-dimethylacrylamide (DMA), and N-isopropylacrylamide (NIPA) in aqueous clay suspensions at 21 °C. Laponite with a radius of gyration in distilled water of 20 nm was used as clay particles in the hydrogel preparation. The reactions with AAm monomer were carried out in the presence of the chemical crosslinker N,N′-methylenebis(acrylamide) (BAAm). It was found that the volume of nanocomposite hydrogels immersed in water rapidly increases and attains a maximum value after about one day. Surprisingly, further increase in the swelling time results in the deswelling of the gels until they reach a limiting swelling ratio after about 5 days. This unusual swelling behavior is observable only when the clay concentration in the hydrogel is above the overlap threshold c^∗. Swelling measurements combined with the elasticity tests show that the effective crosslink density first decreases, but then increases with increasing time of swelling of the hydrogels. The results were explained in terms of the rearrangements of the highly entangled polymer chains and clay particles during the gel volume change.     

Synthesis and characterization of pH- and temperature-sensitive hydrogel of N-isopropylacrylamide/cyclodextrin based copolymer

A reactive β-Cyclodextrin (β-CD) based monomer carrying vinyl carboxylic acid functional groups was synthesized via reaction of β-CD with maleic anhydride (MAH) in N,N-dimethylformamide (DMF) at 80 °C. By copolymerization of the monomer with N-isopropylacrylamide (NIPA), a novel hydrogel, poly(NIPA-co-MAH-β-CD) with pH and temperature sensitivities plus molecular inclusion function, was obtained using free radical polymerization in aqueous solution. The hydrogel's composition was determined by element analysis and infrared spectroscopy. Equilibrium swelling ratio (ESR) of hydrogels was tested under different environment of pH, temperature and ionic strength. The results indicated that ESR of hydrogels presents marked variations following the change of experimental conditions used.     

Influence of the swelling history on the swelling kinetics of stimuli-responsive poly[(N-isopropylacrylamide)-co-(methacrylic acid)] hydrogels

The influence of the swelling history on the swelling behavior of poly[(N-isopropylacrylamide)-co-(methacrylic acid)] P[(N-iPAAm)-co-(MAA)] random copolymers hydrogels synthesized by free radical polymerization in solution of N-iPAAm and MAA comonomers crosslinked with tetraethylene glycol dimethyl acrylate (TEGDMA) has been studied. The swelling behavior under pH 7 at 18, 29, 39 and 49 °C of this series of copolymers, previously soaked either at pH 2 or 7 has been investigated. The swelling kinetics of these two series of samples displays different behavior as function of the composition and temperature. However, the equilibrium swelling values only show slight dependences on the previous soaking pH and temperature. When samples are soaked at pH 7, then the swelling at pH 7 follows a first order kinetics, irrespective of the copolymer composition or the temperature at which the experiment has been carried out. In this case, the swelling process is very fast and depends only slightly on temperature. The first order rate constant increases with the MAA content in the hydrogel. Furthermore, the swelling rate of copolymer hydrogels soaked at pH 2, show strong dependence on composition and temperature. They follow an autocatalytic swelling kinetics due to the disruption of hydrogen bond arrangements. An initial slow water uptake is followed by an acceleration process, in which water molecules inside the gel help the next water molecules to come in. Two rate constants, a first-order rate constant and an autocatalytic one have been obtained from the kinetics analysis. They have revealed different temperature dependence which may be due to a balance between hydrophobic and hydrogen bond interactions. The temperature dependence of the swelling kinetics is stronger and more complex for copolymers treated under pH 2 than for copolymers soaked under pH 7.     

Ionization‐induced ultrarapid response behavior of fibrous and porous electrospun hydrogels containing carboxyl groups

Fibrous porous membranes composed of poly(N‐isopropylacrylamide‐co‐acrylic acid) and poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) were prepared by electrospinning. The membranes behaved like hydrogels in water after being crosslinked at elevated temperatures. Investigations of the swelling and deswelling behavior indicated that the response rates significantly increased after the carboxyl and/or anhydride groups in the hydrogel membranes were ionized or neutralized with NaOH. It took them less than 60 s to reach equilibrium swelling and about 90 s to reach equilibrium deswelling. The response rates were much higher than those of the parent un‐ionized membranes; this indicated that ionization played an important role in the ultrarapid response behavior. The response rate was also higher than that of most hydrogel materials previously reported and was even comparable to superporous hydrogels with high moisture contents. The mechanism of the ultrarapid response behavior of the ionized membranes was qualitatively analyzed. We believe that the fine fiber diameter, high porosity, and improved wettability with water contributed to the ultrarapid response behavior. This study presents a new and facile method for improving the response rate of hydrogel materials made by electrospinning. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterisation of stimuli-responsive poly(N,N′-diethylacrylamide) hydrogels

Stimuli-responsive poly(N,N′-diethylacrylamide) gels were prepared by free radical polymerisation in aqueous solution, using N,N-methylenebisacrylamide as crosslinking agent. The gels were compared with the corresponding poly(N-isopropylacrylamide)-based gels. In particular, the swelling ratio of both gel types including the effect of the crosslinker content, their swelling and deswelling kinetics, their permeability and finally their drug (insulin) storage and controlled release ability were compared. In spite of the similarity in the monomer/crosslinker ratio, the deswelling kinetics and the critical temperatures (ca. 30-32 °C in pure water), some differences could be observed. Compared to poly(N-isopropylacrylamide)-based gels, poly(N,N′-diethylacrylamide)-based gels show a broader phase transition temperature interval, a more pronounced dependency of the swelling ratio on the crosslinker content, slower reswelling kinetics, a higher ingress percentage for dextran standards ranging from 5 to 70 kD, but lower ingress percentages for proteins (BSA, insulin) and much faster drug (insulin) release kinetics. While a non-linear release kinetic was observed in the case of the poly(N-isopropylacraylamide)-based gels both in water and in PBS (phosphate buffered saline), this was not the case for the poly(N,N′-diethylacrylamide)-based gels.     

Electrochemical and thermal properties of polymer electrolytes based on poly(epichlorohydrin-co-ethylene oxide-co-ally glycidyl ether)

A series of novel electrolytes based on the terpolymer host, poly(epichlorohydrin-co-ethylene oxide-co-allyl glycidyl ether) with lithium perchlorate and lithium bis(trifluoromethanesulfonyl)imide have been prepared and characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode and thermal analysis.Electrolyte compositions, represented as p(EEO-AGE)LiX(wt%), were produced with lithium salt compositions between 0.5 and 53 wt% (where wt% indicates amount of lithium salt present in the epichlorohydrin-co-ethylene oxide-co-allyl glycidyl host matrix). The guest salt and host polymer were dissolved in tetrahydrofuran and cast to produce thin, free-standing electrolyte films.The p(EEO-AGE)LiX(wt%) (X = ClO₄ and TFSI) electrolytes showed encouraging levels of ionic conductivity and acceptable thermal stability. Electrolytes based on this host polymer were obtained as completely amorphous films with good mechanical properties.     

Poly(ethylene oxide)-grafted poly(N-isopropylacrylamide) networks: Preparation, characterization and rapid deswelling and reswelling behavior of hydrogels

Poly(ethylene oxide)-grafted poly(N-isopropylacrylamide) networks (PNIPAAm-g-PEO) were prepared via the reversible addition-fragmentation chain transfer polymerization (RAFT) of N-isopropylacrylamide with trithiocarbonate-terminated poly(ethylene oxide) and N,N′-methylenebisacrylamide as the chain transfer agent and the crosslinking agent, respectively. It was found that the PNIPAAm-g-PEO copolymer networks were microphase-separated and that PEO microdomains were dispersed in the PNIPAAm matrix. The hydrogel behavior of the PNIPAAm-g-PEO networks was investigated using swelling, deswelling and reswelling tests. The PNIPAAm-g-PEO hydrogels displayed faster responses to external temperature changes than did the control PNIPAAm hydrogel.     

Preparation and characterisation of a poly(acrylamidoglycolic acid-co-acrylamide) hydrogel for selective binding of Cu and application to diffusive gradients in thin films measurements

A poly(acrylamidoglycolic acid-co-acrylamide) [poly(AAGA-co-AAm)] hydrogel was prepared by copolymerising 2-acrylamidoglycolic acid (AAGA) with acrylamide (AAm). The copolymer hydrogel composition and structure was characterised by FTIR spectroscopy and elemental microanalysis and found to contain 3.5 AAGA monomer units for each AAm monomer unit. This was similar to the monomer ratios used in the synthesis. The metal ion binding properties of the hydrogel were characterised for a range of metal ions (Cu²⁺, Cd²⁺, K⁺, Na⁺, Mg²⁺ and Ca²⁺) under varying conditions of pH, ionic strength, metal concentration and time. The hydrogel was shown to bind Cu²⁺ and Cd²⁺ strongly under non-competitive binding conditions, with binding capacities of 5.3 and 5.1 μmol cm⁻², respectively. The binding capacity of each metal decreased, under competitive binding conditions (with a range of metal ions present at 17.8 μN), to 1.3 and 0.17 μmol cm⁻², respectively, indicating stronger selectivity for Cu²⁺. The metal ions were readily recovered (>94%) by eluting with 2 M nitric acid solution for 24 h. The binding capacities for Cu²⁺ and Cd²⁺ were also found to decrease with increasing ionic strength and at pH values <5. The copolymer was found to have an equilibrium swelling ratio (q_w) of over 500 at a maxima of pH 5.4 and at low ionic strengths. Finally, the copolymer hydrogel was tested as a binding phase with the diffusive gradients in thin films technique. A linear mass vs. time relationship was observed for Cu²⁺ in synthetic Windermere water with a recovery of approximately 100%.     

快速响应聚(N-异丙基丙烯酰胺)水凝胶的制备及性能

以N-异丙基丙烯酰胺为单体、N,N′-亚甲基双丙烯酰胺为交联剂、过硫酸铵为引发剂、N,N,N,′N′-四甲基乙二胺为加速剂,在不同浓度的羧甲基纤维素的水溶液中,在低温下聚合/交联制备了一系列快速响应的温度敏感性聚(N-异丙基丙烯酰胺)水凝胶。用SEM观察了其表面形态,测定了不同温度下达到平衡时水凝胶的溶胀比,研究了水凝胶的去溶胀动力学。结果表明,与传统水凝胶相比,该水凝胶的溶胀性能有所提高,并且对温度的变化具有较快的响应速率。以质量分数为0.75%的羧甲基纤维素水溶液中制备的水凝胶为例,该水凝胶在20℃时的溶胀比为21.4,而传统水凝胶在相同温度时的溶胀比仅为12.9;该水凝胶在1 m in内失去60%的水,在4 m in内失去约80%的水,而传统水凝胶在15 m in内仅失去66%左右的水。     

Novel dually responsive hydrogel with rapid deswelling rate

Hydrogels based on 2‐hydroxyethyl methacrylate (HEMA), methacrylic acid (MAA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) were prepared by free radical polymerization. The prepared hydrogels were characterized using Fourier transform infrared spectrometry. The states of water in the hydrogels were probed using differential scanning calorimetry and three types of water (free, freezing bound and non‐freezing bound) were detected, the contents of which were calculated. Compared with conventional poly(HEMA‐co‐MAA) hydrogels, the deswelling rate of the poly(HEMA‐co‐PEGMA‐co‐MAA) hydrogels is significantly improved, owing to the introduction of PEGMA. The deswelling process can be well described with a first‐order kinetics equation. Moreover, the swelling ratio of poly(HEMA‐co‐PEGMA‐co‐MAA) hydrogels exhibits a temperature dependence. Based on the analysis of the components of the hydrogels, a brushed core/shell structure is proposed for these, and confirmed by transmission electron microscopy observations. Copyright © 2006 Society of Chemical Industry     

Morphology, thermal, and viscoelastic properties of poly(glycidyl methacrylate-co-methyl methacrylate)-based nanocomposites with various organo-modified clays

New nanocomposites of poly(glycidyl methacrylate-co-methyl methacrylate) (PGM) cured with cyclohexanedicarboxylic anhydride (CDCA) and layered silicates of inorganic content 3 and 5 wt% were prepared by casting the solution of the mixture and subsequent cross-linking at finally 200 °C. Non-modified montmorillonite (MMT) and organo-MMTs (ODA-M, ALA-M, LEA-M, and HBP-M) modified with octadecylamine, 12-aminolauric acid, N-lauryldiethanolamine, and hexadecyltributylphosphonium bromide, respectively, were used as layered silicates. X-ray diffraction and morphological studies using transmission electron microscopy revealed that the highly intercalated nanocomposites with the interlayer spacing more than 5.5 nm are formed for the PGM-CDCA/ODA-M, LEA-M, and HBP-M composites with inorganic content 3 wt%. When the inorganic content was increased from 3 to 5 wt%, the degree of intercalation of all the PGM-CDCA/organoclay composites was lowered. Dynamic viscoelastic measurement revealed that the organoclay nanocomposites have significantly higher storage modulus than the PGM-CDCA neat resin. The thermogravimetric analysis revealed that the HBP-M composite with inorganic content 5 wt% has the highest thermal decomposition temperature.