共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
3.
通过对氧化铝生产方法的技术经济分析,从各种氧化铝生产方法的技术比较、投资比较、成本比较,到各种氧化铝生产方法的经济效益分析,指出了发展我国氧化铝工业应该采取的技术路线,并结合中州铝厂的扩建提出了建设规模和生产方法的建议。 相似文献
4.
民办教育投资的收入、成本分析 总被引:1,自引:0,他引:1
本文从分析民办教育投资的背景出发,站在投资者的角度,对投资民办教育的收入和成本进行了分析和探讨。一是选题较新。目前对投资民办教育的收入、成本尚没有系统的分析,本文在此做了一个尝试,从投资者角度对民办教育这个行业所存在的收入、成本进行了一个较全面的分析。二是梳理出民办教育投资的收入和成本.提出了创收和控制成本的方法、措施,并引入企业的某些管理方法,进行了结合,作出了尝试性分析。 相似文献
5.
本文研究了利用IRIS型电感耦合等离子体光谱分析仪分析铝及铝合金中24种元素的方法,阐述了样品及试剂的制备方法以及分析线的选择,对干扰试验、检出限试验、回收率试验及精密度试验结果进行了分析讨论。大量试验结果表明,本方法快捷、简便、准确度高,可以在铝加工行业推广应用。 相似文献
6.
在某铜矿水平矿柱回采结构稳定性有限元计算的基础上,探讨了有限元计算结合结构可靠性分析的应用方法,给出了该矿柱的可靠性指标、失效概率等分析结果。研究表明,有限元-可靠性方法为矿山工程的结构稳定性分析提供了新的思路和应用途径。 相似文献
7.
介绍了一种化学实验室内部分析质量的管理方法,该方法可用于分析方法的选定、验证、全面掌握和正确运用,了解分析人员的技术水平,保证分析质量。 相似文献
8.
当今X射线荧光光谱(XRF)已成为钒钛磁铁矿分析最重要的方法之一。作者收集了1993—2022年我国X射线荧光光谱技术分析钒钛磁铁矿(包括钛矿石、钒矿石、钛铁矿等)的期刊文献共计32篇,其中23篇采用熔融制样方法,9篇采用粉末压片制样方法。文章介绍了我国钒钛磁铁矿分析概况,对31篇期刊文献用列表方式简介了方法要点,对其中较典型、有代表性的文献按制样方法进行了重点评介,最后讨论了X射线荧光光谱分析地质材料时的制样方法选取、样品粒度影响和钒钛磁铁矿石的X射线荧光光谱分析方法的未来发展等问题。全篇引文44篇。 相似文献
9.
许祖浩 《有色冶金设计与研究》1996,17(3):52-56
本文阐述了盈亏平衡分析的原理,介绍了线性和非线性盈亏平衡分析的数学计算方法与图解方法,用实例说明了其具体应用,并分析了盈亏平衡分析的优缺点。 相似文献
10.
11.
The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. Because the shape and rolling force distribution are very sensitive to strip thickness transverse distribution′s variation, the iterative course is rather unstable and sometimes convergence cannot be achieved. In addition, the calculating speed of results coupling method is low, which restricts its usable range. To solve the problem, a new model coupling method is developed, which takes the force distribution between rolls, rolling force distribution and strip′s exit transverse displacement distribution as basic unknowns, and integrates strip plastic deformation model and rolls elastic deformation model as a unified linear equations through their internal relation, so the iterative calculation between the strip plastic deformation model and rolls elastic deformation model can be avoided. To prove the effectiveness of the model coupling method, two examples are calculated by results coupling method and model coupling method respectively. The results of front tension stress, back tension stress, strip′s exit gauge, the force between rolls and rolling force distribution calculated by model coupling method coincide very well with results coupling method. However the calculation course of model coupling method is more steady than results coupling method, and its calculating speed is about ten times as much as the maximal speed of results coupling method, which validates its practicability and reliability. 相似文献
12.
利用离散坐标法对圆柱形炉膛辐射传热进行了计算,结果与计算精确的区域法的计算结果符合较好;同时又利用离散坐标法和热流法对旋流燃烧室温度场进行比较计算,结果表明:离散坐标法计算结果与文献中实验结果符合较好;离散坐标法具有较好计算精度,可应用旋流燃烧辐射计算中. 相似文献
13.
14.
The dynamic flexibility (DF) and improved dynamic flexibility (IDF) methods can be applied to extract constrained structural modes from free-free modal test data. The residual flexibility method is also good for boundaries of constrained structure with rigid supports. Under elastic support boundary conditions both the DF and residual flexibility methods cannot produce accurate results. This paper expands the previously published IDF method to become a more general approach for structural design engineers. A new method called the general dynamic flexibility (GDF) method has been developed in this paper to extract constrained structural modes from free test data. The GDF method can always be applied as follows: (1) when the boundary support stiffness is very stiff, the GDF method can accurately obtain results from rigid support as by Liu et al. in 2001 and Zhang and Wei in 2003; (2) when the support stiffness is soft, the present method can produce results similar to those free-free modal parameters measured by hanging structures using rubber band; (3) when the support stiffness is zero, the method can reproduce true free-free modal parameters; and (4) when the support stiffness has any finite values, the GDF method can also achieve satisfactory results for engineering use. The algorithm included in the GDF method converges rapidly and is numerically stable in the analysis. This feature is very practical for many engineering applications for using the GDF method. 相似文献
15.
火焰原子吸收光谱法测定载金炭中金 总被引:1,自引:0,他引:1
采用火焰原子吸收光谱法测定了载金炭中的金,并经过方法条件实验,确定了最佳测定条件。该方法相对标准偏差为0.37%~1.01%,加入标准物质回收率为100.4%~102.7%。该方法与经典火试金法对比,测定结果完全符合。 相似文献
16.
利用盲孔法、X-Ray法、中子衍射法和超声法对Q390高强抗震板及U形弯曲件进行残余应力检测,并对这4种方法测试得到的应力结果进行分析研究。结果表明,以上4种检测方法均要考虑其特定的检测应用范围,X-Ray法针对钢板表面下微米级深度的微米级晶格尺度范围局部点应力进行检测,中子衍射法可在毫米级尺度局部区域进行应力检测,盲孔法反映的是因毫米尺度钻孔导致的钢板表面孔周边的应力变化,超声法则可以通过连续扫描检测整个钢板残余应力的宏观分布变化。因此,对于工业钢板,超声法测试残余应力更加科学、合理、准确。同时,通过U形试样建立稳定的应力应变场,利用超声设备使用不同参考态对Q390高强抗震板弯曲件及退火弯曲件进行测试,结果表明,测试参考态的选取对应力测试结果影响很大,材料各向异性的影响对应力测试结果不可忽视。 相似文献
17.
分别采用线性加权平均、线性拟合、BP神经网络和Elman神经网络方法建立煤质特性预测模型,对混煤煤质特性进行预测.将四种方法的预测结果进行分析比较,辨别混煤煤质特性与各单煤煤质特性间的线性与非线性关系.分析表明:混煤的发热量、水分、灰分和硫分与各单煤相应煤质特性具有简单的线性关系.其中,发热量、水分和硫分的线性拟合预测结果优于线性加权平均预测结果;混煤挥发分与各单煤挥发分之间呈非线性关系,Elman神经网络预测效果最佳. 相似文献
18.
运用有限元方法对H型钢万能轧制过程水平辊温度场进行了数值模拟,根据模拟结果分析了水平辊辊面温度分布状况,结果表明:与H型钢腹板部位接触的水平辊辊面温度较低,与H型钢R角部位接触的水平辊辊面温度最高。此外,还完成了小型H型钢万能轧机水平辊冷却试验,水平辊冷却方式分别为气雾冷却和水冷,试验结果表明:轧辊采用气雾冷却方式进行冷却时,型钢腹板残留冷却水较少且型钢表面温差较小,轧辊辊面温差和轧辊磨损程度均较小,且轧后轧辊温度更容易降至室温。总体而言,轧辊采用气雾冷却效果比采用水冷效果好。 相似文献
19.
主要研究了晶粒度显示方法对18CrMnB渗碳齿轮钢奥氏体晶粒度测定结果的影响。研究结果表明:用渗碳法和晶粒边界腐蚀法测定其晶粒度差别很大;由于用渗碳法显示晶粒比较接近渗碳钢实际热处理条件,故对渗碳钢宜采用渗碳法测定晶粒度。 相似文献