A comparative study among different photochemical oxidation processes to enhance the biodegradability of paper mill wastewater

Advanced oxidation processes including UV, UV/H(2)O(2), Fenton reaction (Fe(II)/H(2)O(2)) and photo-Fenton process (Fe(II)/H(2)O(2)/UV) for the treatment of paper mill wastewater will be investigated. A comparison among these techniques is undertaken with respect to the decrease of chemical oxygen demand (COD) and total suspended solids (TSS) and the evolution of chloride ions. Optimum operating conditions for each process under study revealed the effect of the initial amounts of Fe(II) and hydrogen peroxide. Of the tested processes, photo-Fenton process was found to be the fastest one with respect to COD and TSS reduction of the wastewater within 45 min reaction time under low amounts of Fe(II) and hydrogen peroxide of 0.5 and 1.5mg/L, respectively, and amounted to 79.6% and 96.6% COD and TSS removal. The initial biodegradability of the organic matter present in the effluent, estimated as the BOD(5)/COD, was low 0.21. When the effluent was submitted to the different types of AOPs used in this study, the biodegradability increases significantly. Within 45 min of reaction time, the photo-Fenton process appears as the most efficient process in the enhancement of the biodegradability of the organic matter in the effluent and the BOD(5)/COD ratio increased from 0.21 to 0.7.     

A comparative study of ultrasonic cavitation and Fenton's reagent for bisphenol A degradation in deionised and natural waters

Bisphenol A (BPA), a xenobiotic that exhibits endocrine disrupting action can be found in surface water. Its complete elimination can be obtained by advanced oxidation processes, notably upon the application of ultrasonic waves. In order to evaluate the feature of ultrasound relevance and the involvement of the hydroxyl radical in the BPA sonochemical degradation, ultrasound action was compared to Fenton's reaction in the cases of deionised acidic water (pH 3) and natural water (pH 7.6, main ions concentration: Ca(2+)=486mgL(-1), Na(+)=9.1mgL(-1), Cl(-)=10mg L(-1), SO(4)(2-)=1187mgL(-1), HCO(3)(-)=402mgL(-1)). Ultrasound was performed at 300kHz and 80W. Fenton's process was operated using ferrous sulphate (100micromolL(-1)) and continuous H(2)O(2) addition at the rate as it is produced when sonication is applied in water in absence of substrate. Experiments carried out in deionised water show that both processes exhibit identical BPA elimination rate and identical primary intermediates. Main chemical pathways involve reactions with OH radical. Chemical oxygen demand (COD) and total organic carbon (TOC) analyses show that the Fenton's process is slightly more efficient than ultrasonic treatment for the removal of BPA by-products in the case of deionised water. Experiments conducted in natural water evidenced the inhibition of the Fenton process while the ultrasound action was not hampered.     

Nanostructured modified layered double hydroxides (LDHs)-based catalysts: A review on synthesis,characterization, and applications in water remediation by advanced oxidation processes

Layered double hydroxides (LDHs) are emerging catalyst materials with inner layer water molecules and higher anion exchange capacity. They have been extensively used as catalyst materials owing to their high specific surface area, environmental friendliness, lower cost, and non-toxicity. However, the lower surface area and leaching of metal ions from LDHs composites reduce the process efficiency of the catalyst. Modifying the LDHs materials with other materials can improve the surface properties of the composite and enhance the catalytic performance. Herein, this review aims to summarize the recent progress of nanostructured modified LDHs materials, their classification, synthesis, and a detailed discussion on their characterization techniques. Further, this study also discusses the application of nanostructured modified LDHs materials as catalysts in advanced oxidation process (AOPs) for various organic pollutants removal.