Equivalent transformations for the mixed lumped Brune-type sectionand uniform transmission line

As an analytical method for nonuniform transmission lines (NTLs) equivalent transformations are extended to a more general case, namely a mixed lumped Brune-type section and a uniform transmission line (unit element, UE). Circuits consisting of a cascade connection of a lumped Brune section and a UE are equivalent to one consisting of a cascade connection of a nonuniform transmission line whose characteristic impedance distribution is expressed with a trigonometric function and a lumped Brune section. This equivalent transformation method is easily applied to a circuit consisting of a lumped C section and a UE. The equivalent circuit is a circuit consisting of an NTL and a lumped C section. In this case, the characteristic impedance distribution of the NTL may be expressed in terms of a hyperbolic function. Exact network functions of the NTLs are easily obtained from the equivalent circuits without solving the telegrapher's equation. By considering the limiting case of these equivalent transformations, equivalent transformations for circuits consisting of a cascade connection of a lumped resonance circuit and a circuit and a uniform transmission line are derived     

A Note on Loaded Line Synthesis (Correspondence)

The purpose of this note is to present an alternate derivation of a formula for the synthesis of a loaded line. The problem is to determine the values of the normalized susceptances a and c mounted an exact quarter-wavelength apart along a uniform line. These are arranged in the order a, c, c,. . .c, a to achieve a loaded line with a given phase shift and perfect match. In order to analyze a particular line design for standing-wave ratio and phase shift over a band of frequencies on a digital computer, it is worthwhile to know the values of the susceptances to many more decimal places than one would achieve from a simple graph.     

Identification of the source of an interferer by comparison with known carriers using a single satellite

We describe a method for identifying the source of a satellite interferer using a single satellite. The technique relies on the fact that the strength of a carrier signal measured at the downlink station varies with time due to a number of factors, and we use a quantum‐inspired algorithm to compute a “signature” for a signal, which captures part of the pattern of variation that is a characteristic of the uplink antenna. We define a distance measure to numerically quantify the degree of similarity between two signatures, and by computing the distances between the signature for an interfering carrier and the signatures of the known carriers being relayed by the same satellite at the same time, we can identify the antenna that the interferer originated from, if a known carrier is being relayed from it. As a proof of concept, we evaluate the performance of the technique using a simple statistical model applied to measured carrier data.     

Maximum likelihood parameter estimation of textures using aWold-decomposition based model

We present a solution to the problem of modeling, parameter estimation, and synthesis of natural textures. The texture field is assumed to be a realization of a regular homogeneous random field, which can have a mixed spectral distribution. On the basis of a 2-D Wold-like decomposition, the field is represented as a sum of a purely indeterministic component, a harmonic component, and a countable number of evanescent fields. We present a maximum-likelihood solution to the joint parameter estimation problem of these components from a single observed realization of the texture field. The proposed solution is a two-stage algorithm. In the first stage, we obtain an estimate for the number of harmonic and evanescent components in the field, and a suboptimal initial estimate for the parameters of their spectral supports. In the second stage, we refine these initial estimates by iterative maximization of the likelihood function of the observed data. By introducing appropriate parameter transformations the highly nonlinear least-squares problem that results from the maximization of the likelihood function, is transformed into a separable least-squares problem. The solution for the unknown spectral supports of the harmonic and evanescent components reduces the problem of solving for the transformed parameters of the field to a linear least squares. Solution of the transformation equations then provides a complete solution of the field-model parameter estimation problem. The Wold-based model and the resulting analysis and synthesis algorithms are applicable to a wide variety of texture types found in natural images.     

Fast fully 3-D image reconstruction in PET using planograms

We present a method of performing fast and accurate three-dimensional (3-D) backprojection using only Fourier transform operations for line-integral data acquired by planar detector arrays in positron emission tomography. This approach is a 3-D extension of the two-dimensional (2-D) linogram technique of Edholm. By using a special choice of parameters to index a line of response (LOR) for a pair of planar detectors, rather than the conventional parameters used to index a LOR for a circular tomograph, all the LORs passing through a point in the field of view (FOV) lie on a 2-D plane in the four-dimensional (4-D) data space. Thus, backprojection of all the LORs passing through a point in the FOV corresponds to integration of a 2-D plane through the 4-D "planogram." The key step is that the integration along a set of parallel 2-D planes through the planogram, that is, backprojection of a plane of points, can be replaced by a 2-D section through the origin of the 4-D Fourier transform of the data. Backprojection can be performed as a sequence of Fourier transform operations, for faster implementation. In addition, we derive the central-section theorem for planogram format data, and also derive a reconstruction filter for both backprojection-filtering and filtered-backprojection reconstruction algorithms. With software-based Fourier transform calculations we provide preliminary comparisons of planogram backprojection to standard 3-D backprojection and demonstrate a reduction in computation time by a factor of approximately 15.     

A quad-rotor system for driving and flying missions by tilting mechanism of rotors: From design to control

This article presents the hybrid design and control of a quad-rotor system called Flymobile. Flymobile is a combined system of a mobile robot and a quad-rotor system aimed to perform both flying and driving tasks. Flymobile performs flying tasks in the same way as conventional quad-rotor systems while the tilting mechanism of each rotor allows Flymobile to navigate in its terrain for a driving task. The body frame with rotors is implemented by a calibration process through a test-bed equipped with a force sensor. The triangular wheel frame is designed to mimic motions of a mobile robot with three passive wheels. Sensor data of a gyro and an accelerometer are filtered and used for controlling the attitude of the system. Focusing on a practical approach of implementing a hybrid system, a non model-based approach is applied to control Flymobile. Experimental studies are demonstrated to show the feasibility of performing both driving and flying missions.     

Modeling the flow-level performance of hierarchical modulation in?OFDMA-based networks

Hierarchical Modulation (HM) is a means to enhance the spectral efficiency of a system by superposing, in terms of modulation, an additional stream for a given user with good radio conditions on a basic stream of a user with worse radio conditions. This, in turn, increases the throughput of the former user and hence the overall performance of the whole system. We consider, in this work, such a performance at the flow level, for a realistic dynamic setting where users come to the system and leave it after a finite duration corresponding, for instance, to the completion of a file transfer. We specifically model and quantify, both analytically and via simulations, the gain thus achieved and propose two extensions to the basic HM algorithm: a first one in which a user with bad radio conditions is also superposed on one with better radio conditions and a second one in which a user of one type is further superposed on a user of the same type as well.     

Systems-in-foil – Devices,fabrication processes and reliability issues

Systems-in-foil are a new class of electronics in which a full system is integrated into a flexible end product. In this paper, we discuss current research activities and state-of-the-art in this field. Furthermore, some of the associated and expected reliability issues will be addressed on the basis of three examples. As a first example we discuss a flexible large area polymeric organic light-emitting (OLED) device. The reliability targets of these devices require protection against the detrimental influence of water. As a second example, we describe a technology for embedding thinned Si chips between polymeric foils where a careful selection of the base materials is important to account for thermal expansion differences. Finally, as a third example, a novel technology for embedding conductive circuitry in a polymeric foil is discussed in which a good matching of the elastic moduli of the polymeric foil and the embedded circuitry is crucial for the flexibility robustness.     

Output feedback stabilization—Solution by algebraic geometry methods

Given an unstable finite-dimensional linear system, one can relate the existence of a memoryless feedback law stabilizing the system to the existence of a real solution of a set of multivariable polynomial inequalities. From these inequalities, a set of equalities may be constructed with two properties: the equality set has a real solution precisely when the inequality set does; generically the equality set has a finite number of solutions. Multivariable polynomial resultants provide a method of solving the equalities subject to the condition that the equalities have a finite number of solutions. The property that there is a finite number of solutions is established using some results of algebraic geometry.     

Perspectives on special issues [From the Editor]

The special issues of IEEE Signal Processing Magazine (SPM) provide a forum wherein a collection of tutorials, concentrated on a specific topic, span the entire field and expose a wide-ranging segment of readers in the signal processing community to a thorough overview of the topic. The presentation of complementary tutorials, focused on a particular area in signal processing and aimed at a broad technical audience, is a unique feature of this publication. The wide exposure of selected topics to a large audience makes the special issues in SPM a top venue to educate and raise the prominence of important disciplines in signal processing.     

Computer-aided design of a Si avalanche photodiode

A computer-aided design of a Si avalanche photodiode is presented. As an example, the design of the boron diffused photodiode with a desired time constant is carried out. The choice of an area of an active region is not affected by a diffusion condition but primarily by a substrate impurity concentration. For a very high speed response a moderate substrate impurity concentration must be selected. For a longer time constant than about 0.1 ns an increasing area of an active region is acceptable with a decreasing substrate impurity concentration. In a lightly doped substrate, a uniform multiplication of an active region cannot occur. Using the usual diffusion technique the acceptable highest resistivity of a substrate is about 1-2 Ω.cm. The capacitance of the guard ring occupies a considerable part in a total capacitance. Calculated results are in good agreement with experimental results.     

A double-gate-type static-induction thyristor

A double-gate-type static-induction thyristor (DG-SIThy) with a high blocking voltage and a high current rating has been fabricated. In this paper, a basic operational mechanism, a fabrication procedure, and the electrical characteristics of the DG-SIThy are described. In the DG-SIThy, both electron injection and hole injection are controlled by signals applied to two gale regions so that the DG-SIThy is capable of higher frequency operations than a single-gate SIThy. In the DG-SIThy, described here, both a cathode and a gate (first gate) regions have been fabricated on one side of a semiconductor wafer and both an anode and gate.(second gate) regions on another side. For realizing the DG-SIThy with a high blocking voltage and a high current rating, we have tried attentively to form a p-n junction on one side of the wafer without influencing the p-n junction on the other side, and have developed a new counter-doping technique for epitaxial growth and an improved package structure for a compression-mounted device. The DG-SIThy fabricated with these techniques has shown a for-Ward blocking voltage of 1000 V, an average current rating of 100 A, and a forward voltage drop of 1.44 V at the rated anode current. A turn-on time of 0.95 its and a turn-off time of 0.48 µs have been observed at the rated anode current and at anode voltages of 650 and 550 V, respectively. As already speculated, the DG-SIThy shows a higher switching speed and a lower forward drop than the single-gate SIThy.     

一种安全的纠错网络编码

该文利用消息空间的所有子空间上的一种度量,给出了一种安全的纠错网络编码。首先,此度量下的最小距离译码法可以纠正一定维数的错误。另外,在此编码方法下,当攻击者能窃听到的信道数目小于网络的最大流时,攻击者得不到关于信源的任何信息。最后,当攻击者能窃听网络中所有信道时,本文通过让信源和信宿共享一个随机数生成器和一个秘钥,进一步给出了能防此类强攻击者的安全纠错网络编码。     

Optical pulse sequence transmission through single-mode fibers:interference signal analysis

The transmission of a pulse sequence through a single-mode fiber is considered under first- and second-order dispersion. An expression is given for the output power signal envelope in terms of the Fourier transform of a spectral function. The output envelope is composed of two terms: a linear one which is a distorted replica of the information sequence, and a nonlinear interference term. The latter is expressed in a more meaningful way and analyzed. The results allow a characterization and a classification of the interference pulses in terms of physically intuitive parameters     

WiFi access point pricing as a dynamic game

We study the economic interests of a wireless access point owner and his paying client, and model their interaction as a dynamic game. The key feature of this game is that the players have asymmetric information - the client knows more than the access provider. We find that if a client has a "web browser" utility function (a temporal utility function that grows linearly), it is a Nash equilibrium for the provider to charge the client a constant price per unit time. On the other hand, if the client has a "file transferor" utility function (a utility function that is a step function), the client would be unwilling to pay until the final time slot of the file transfer. We also study an expanded game where an access point sells to a reseller,which in turn sells to a mobile client and show that if the client has a web browser utility function, that constant price is a Nash equilibrium of the three player game. Finally, we study a two player game in which the access point does not know whether he faces a web browser or file transferor type client, and show conditions for which it is not a Nash equilibrium for the access point to maintain a constant price.     

Nonlinear predictive control with application to manipulator withflexible forearm

A neural network is constructed to represent the input-output relation of a dynamical model. The parameters are calculated by means of a second-order training algorithm. Then, a nonlinear predictive controller is designed on the basis of a neural network plant model using the receding-horizon control approach. Based on the neural model, the control is calculated by minimizing a projected cost function that penalizes future tracking errors. As an illustration of the approach, the nonlinear dynamics of a planar two-joint arm with a flexible forearm are modeled using a sigmoidal network and an offline estimation procedure for a range of motions. The applicability of the approach is illustrated through computer simulations     

Transient-Pulse Nonlinear Spectroscopy with the Radiation of a Multimode THz Gas Laser

We report on transient-pulse nonlinear spectroscopy with the radiation of a multimode THz gas laser. The method is demonstrated for studying the nonlinear response of a current-carrying superlattice to THz radiation; the current through a superlattice can be suppressed by a strong THz field. The method makes use of the pulses of a high power multimode THz gas laser. By splitting the laser beam for selected laser modes into a main beam and a reference beam we monitored with a reference detector the transient power in the main beam. The simultaneous measurement of both the instantaneous response and the instantaneous power allows to obtain the power dependence of the response within a single laser pulse. The method is suitable to study the nonlinear response of matter to THz radiation fields in a large dynamic range.     

60-GHz-band coplanar MMIC active filters

This paper presents the design and performance of 60-GHz-band coplanar monolithic microwave integrated circuit (MMIC) active filters. To compensate for the loss of the passive filter, a resonator composed of a quarter-wavelength line is terminated by a circuit with a constant negative resistance over a wide frequency band. Cross-coupling is introduced to make the attenuation poles on both sides of the passband. We develop two types of two-stage filter: one with medium bandwidth and the other with narrow bandwidth. The former shows an insertion loss of 3.0 dB with a 3-dB bandwidth of 2.6 GHz and a rejection of larger than 20 dB at a 3-GHz separation from a center frequency of 65.0 GHz. This filter also shows a noise figure of 10.5 dB. The latter filter shows an insertion loss of 2.8 dB with a 10-dB bandwidth of 2.1 GHz at a center frequency of 65.0 GHz. It also shows an output power of 5.0 dBm at a 1-dB compression point. The loss variation due to temperature variation is successfully compensated using a gate bias control circuit. The size of the MMIC filters is 2.5 mm/spl times/1.1 mm.     

A mathematical theory of antenna arrays with randomly spaced elements

Various probabilistic properties of a large antenna array with randomly spaced elements have been studied. It is found that for almost all cases of practical interest the required number of elements is closely related to the desired sidelobe level and is almost independent of the aperture dimension, the resolution (or the beamwidth) depends mainly on the aperture dimension, and the directive gain is proportional to the number of elements used if the average spacing is large. As a consequence the number of elements required is considerably less than that with uniform spacings. Starting with a given number of elements and a given aperture size, it is possible to improve the resolution by a factor of ten, a hundred, or more by spreading these elements over a larger aperture with little risk in obtaining a much higher sidelobe level and a lower directive gain. In fact, this method offers a solution which is optimum in a certain statistical sense, i.e., all sidelobes are of equal level with equal probability. In addition, this analysis also gives a simple estimate of the sidelobe level of most nonuniformly spaced antenna arrays. In a number of such arrays studied by various investigators with high speed computers, the agreement found is remarkable.