首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 80 毫秒
1.
采用水热合成法,分别以HCl、H2SO4和HClO4为介质合成有序介孔分子筛SBA-15,通过X射线衍射表征SBA-15介孔分子筛的结构和晶相水热稳定性,用比表面积仪和透射电子显微镜表征SBA-15介孔分子筛的孔道水热稳定性。结果表明:在HClO4条件下制备的SBA-15介孔分子筛的长程有序度和晶相水热稳定性明显高于H2SO4和HCl条件下制备的样品。改变HClO4的浓度后发现20%HClO4条件下制备的SBA-15的晶相和孔道的水热稳定性最好,沸水处理条件下可以稳定存在150h。  相似文献   

2.
薛君  申力涛 《工业催化》2013,21(8):31-36
以介孔分子筛SBA-15为载体,采用浸渍法制备M/SBA-15(M=Cu、Fe、Cr) 介孔分子筛催化剂。采用XRD、BET、FT-IR、H2-TPR和XPS等对样品进行分析表征,在固定床微型反应器中评价M/SBA-15(M=Cu、Fe、Cr)分子筛催化剂催化NO+CO的反应性能。结果表明,负载金属的SBA-15分子筛仍保持高度有序的二维六方介孔结构,比表面积和孔径略有减少,负载的活性金属组分在SBA-15分子筛表面具有较高的分散度。Cu/SBA-15、Cr/SBA-15和Fe/SBA-15催化剂对NO+CO反应体系均有一定活性,但由于活性金属自身的特性及其在载体表面负载量的差异,3种催化剂上呈现的NO还原活性不同,顺序为:Cr/SBA-15>Cu/SBA-15>Fe/SBA-15。  相似文献   

3.
以甲基纤维素(MC)为辅助模板剂,制备了SBA-16介孔分子筛(SBA-16-MC),以该材料为载体制备了Ni/SBA-16-MC,用作以萘为探针的加氢脱芳反应的催化剂。对催化剂的晶相、形貌、比表面积、孔径等进行了表征,并评价了催化剂的催化性能。结果表明:MC的加入使Ni/SBA-16-MC具有比Ni/SBA-16更高的比表面积、孔容和更大的介孔孔径,SBA-16-MC上NiO与载体的作用变弱,NiO的还原温度降低。Ni/SBA-16-MC的催化活性和选择性均明显高于Ni/SBA-16,脱芳率高于91.0%,十氢萘选择性高于85.0%。  相似文献   

4.
SiW_(12)/SBA-15介孔分子筛催化合成月桂酸乙酯   总被引:3,自引:0,他引:3  
用传统的水热合成法制备纯硅介孔分子筛SBA-15,将SiW12负载在SBA-15上.采用X射线衍射(XRD)、红外光谱(IR)对不同负载量的催化剂进行了表征.表征结果表明,催化剂SiW12/SBA-15仍具有纯硅SBA-15的介孔结构,SiW12的Keggin结构保持完整.该催化剂用于月桂酸与乙醇的酯化反应,重点考察了硅钨酸的负载量、反应温度、酸醇比、催化剂用量等因素对酯化反应性能的影响.得到最佳反应条件为:硅钨酸的负载量为25%,反应温度90 ℃,酸醇比1:2.5,催化剂用量为月桂酸质量的1%,反应时间4 h.催化剂再生实验结果认为,SiW12/SBA-15介孔分子筛具有良好的再生性能和稳定性.  相似文献   

5.
采用两步水热法合成了Al掺杂SBA-15介孔分子筛,并且用XRD、SEM、N2吸附与UV-Vis对所合成的样品进行表征。考察了Al掺杂SBA-15介孔分子筛的有序度、表面形貌、比表面积、Si/Al比以及对亚甲基蓝吸附性能的影响。结果表明:介孔材料保持了完好的二维六方介孔结构,表面形貌无变化,比表面积减小,铝元素均匀地掺杂于SBA-15的骨架当中,Si/Al约为21. 4; Al掺杂SBA-15对水溶液中的亚甲基蓝展现出良好的吸附性能,在15min内,吸附率达96%。  相似文献   

6.
采用水热合成法,将未焙烧的介孔材料SBA-15作为硅源合成介孔SAPO-11分子筛。利用X射线衍射、N2吸附-脱附等温曲线,BET物理吸附,NH3-TPD以及扫描电子显微镜等对分子筛的形貌和孔结构性质进行表征。将正十二烷作为原料,考察负载量为0.5%的Pt/SAPO-11分子筛催化剂的加氢异构化反应催化性能。结果表明:以未焙烧的SBA-15作为硅源制备介孔SAPO-11分子筛,介孔比表面积为77.2 m2/g以及介孔孔容为0.261 m~3/g,有效降低孔道传质阻力,酸量显著增加,活性位增多,使长链烷烃加氢异构化的选择性达到65.21%。  相似文献   

7.
采用一锅法将P123、TEOS、HCl和H2IrCl6溶液混合,酸性条件下得到高度分散的Ir/SBA-15催化剂.使用X射线衍射、透射电镜和N2吸附-脱附等对样品进行表征.结果表明,一步合成的Ir/SBA-15依然保持高度有序的介孔孔道结构、较大比表面积和孔容,而且Ir在SBA-15孔道内高度分散.CO的催化氧化反应结...  相似文献   

8.
朱玉镇  沈健 《陕西化工》2014,(2):292-295
以柠檬酸处理过的偏钒酸铵为钒源,采用后合成法制备出了V/SBA-15负载型催化剂,研究其在氧化苯乙烯制苯甲醛反应中的催化性能.结果表明,在钒负载量低于15%时,V/SBA-15仍保持SBA-15的高度有序的二维六方孔道结构,且具有较大的比表面积和孔体积,负载的活性组分金属钒氧化物均匀分布在介孔分子筛表面;在优化条件下催化氧化苯乙烯制苯甲醛,苯乙烯转化率达65.62%,苯甲醛的选择性81.21%,且V/SBA-15具有较好的催化剂稳定性.  相似文献   

9.
采用微波辅助合成的方法制备出不同形貌的AuAg/SBA-15催化剂。表征结果表明:AuAg合金纳米粒子被限域在SBA-15介孔分子筛的孔道中,增强了活性组分与载体间的作用力,提高了催化剂的稳定性。4-硝基苯酚还原性能结果表明:催化剂的孔径和孔道结构对其催化性能具有重要的影响,其中具有短孔道和大孔径的片状AuAg/SBA-15表现出较好的扩散性能,并在4-硝基苯酚还原反应中具有较高的活性。  相似文献   

10.
SBA-15介孔分子筛的功能化新应用进展   总被引:1,自引:1,他引:0       下载免费PDF全文
SBA-15介孔分子筛,具有规则的孔径分布,大的孔径和较厚的孔壁,可以作为载体材料,且在反应中能提供特殊的微环境,因此在催化与纳米材料领域具有非常广阔的应用前景.针对SBA-15的应用现状,本文集中探讨了现阶段SBA-15在介孔碳的合成、色谱填料基体、纳米化学反应器等新兴领域的应用研究进展,并对今后SBA-15的发展以及研究方向进行了展望.  相似文献   

11.
12.
Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.  相似文献   

13.
14.
Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.  相似文献   

15.
In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.  相似文献   

16.
17.
18.
Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.  相似文献   

19.
收集了2007年7月~2008年6月世界塑料工业的相关资料,介绍了2007~2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.  相似文献   

20.
收集了2005年7月~2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号