Cost efficient utilisation of biomass in the German energy system in the context of energy and environmental policies

The possible uses of biomass for energy provision are manifold. Gaseous, liquid and solid bioenergy carriers can be alternatively converted into heat, power or transport fuel. The contribution of the different utilisation pathways to environmental political targets for greenhouse gas (GHG) emission reduction and energy political targets for the future share of renewable energy vary accordingly to their techno-economic characteristics. The aim of the presented study is to assess the different biomass options against the background of energy and environmental political targets based on a system analytical approach for the future German energy sector. The results show that heat generation and to a lower extent combined heat and power (CHP) production from solid biomass like wood and straw are the most cost effective ways to contribute to the emission reduction targets. The use of energy crops in fermentation biogas plants (maize) and for production of 1st generation transportation fuels, like biodiesel from rapeseed and ethanol from grain or sugar beet, are less favourable. Optimisation potentials lie in a switch to the production of 2nd generation biofuels and the enhanced use of either biomass residues or low production intensive energy crops.     

Exploration of the land potential for the production of biomass for energy in the Netherlands

The energy potential for energy crops and biomass residues in the Netherlands is assessed. The analysis explores the possible use of land for biomass production in the future. Various government memorandums and analyses of the expected future land use in various sectors have served as the basis for the assessment of the supply of and the demand for land in the future. In this study the potential supply of agricultural land is based on expected productivity increments in agriculture and assumptions with respect to the future demand for agricultural products. Various future claims for infrastructure, forestry, urban areas and nature are subtracted from the expected supply. The net projected supply of land ranges from zero to 52 000 ha in 2000 to 110 000-250 000 ha in 2015. The supply of agricultural land depends however on a number of supra-national factors, such as the European agricultural policy, world market developments and the agricultural production in the countries in Eastern Europe. Uncertainties remain, therefore, and the projected supply of agricultural land should be considered as a possible scenario based on current trends. If the calculated land potential is used for energy crops like miscanthus and short rotation coppice, this land could contribute 0-10 PJ in 2000 and 27-59 PJ in 2015. Secondary biomass yields, such as those from forestry, agricultural residues, wood from prunings, etc., could contribute a further 34 PJ in 2000, decreasing to approximately 28 PJ in 2015. Taken together these potentials could satisfy 1-1.5% of the energy requirements of the Netherlands in 2000 and 1.5-2.5% in 2015, provided that energy farming is an economically feasible activity for farmers.     

Exploring the potential of Eucalyptus for energy production in the Southern United States: Financial analysis of delivered biomass. Part I

Eucalyptus plantations in the Southern United States offer a viable feedstock for renewable bioenergy. Delivered cost of eucalypt biomass to a bioenergy facility was simulated in order to understand how key variables affect biomass delivered cost. Three production rates (16.8, 22.4 and 28.0 Mg ha⁻¹ y⁻¹, dry weight basis) in two investment scenarios were compared in terms of financial analysis, to evaluate the effect of productivity and land investment on the financial indicators of the project. Delivered cost of biomass was simulated to range from $55.1 to $66.1 per delivered Mg (with freight distance of 48.3 km from plantation to biorefinery) depending on site productivity (without considering land investment) at 6% IRR. When land investment was included in the analysis, delivered biomass cost increased to range from $65.0 to $79.4 per delivered Mg depending on site productivity at 6% IRR. Conversion into cellulosic ethanol might be promising with biomass delivered cost lower than $66 Mg⁻¹. These delivered costs and investment analysis show that Eucalyptus plantations are a potential biomass source for bioenergy production for Southern U.S.     

Evaluation the potential economic impacts of Taiwanese biomass energy production

The Taiwanese rice paddy land set-aside program diverts a substantial land area. Given today’s high energy prices and interests in energy security, that set-aside area could be converted to produce bioenergy feedstocks. This study evaluates the economic and environmental impacts of such a policy change using a Taiwanese agricultural sector model. The results show that such a strategy provides increased farm revenue, increased rural employment, increased energy sufficiency and reduced greenhouse gas emissions but also increased government expenditures. These outcomes indicate that the agricultural sector could play a positive role by producing renewable energy.     

Vietnam's energy sector: A review of current energy policies and strategies

Since the introduction of market-oriented economy in 1986, Vietnam has made noticeable socio-economic progress. In this progress, the energy sector has played a vital role. This role is likely to deepen in the years to come as Vietnam strives to achieve even higher levels in economic progress. Such deepening in the role of energy, this paper argues, will heighten concerns about the security of energy supply, and economic, environmental, social and political consequences. In order to address these issues, Vietnam has over the last decade, developed a suite of energy policies. A deeper review of these policies suggests that they are typified by economic-growth orientation, exclusive focus on a single-sector or single issue, and largely neglect the significance of cross-sectoral and cross-thematic issues arising from the interdependencies between energy, economy, and the polity at large. The existing energy policy settings are, therefore, unlikely to be able to provide a satisfactory redress to the challenges noted above. This paper provides an overview of the current energy policies with a view to identify areas where further policy effort is needed in order to facilitate a sustainable development of the Vietnamese energy sector.     

Indirect energy input of agricultural machinery in bioenergy production

Sustainability of bioenergy products should be evaluated by means of an energy analysis that takes into account all relevant direct and indirect energy inputs. Direct energy input is viewed as the major energy consuming factor, and is quite easy to measure. Indirect energy input, however, has received relatively scant attention, so it is likely to be insufficiently analysed and possibly underestimated. This paper reviews the data available and suggests the type of research that would be needed to get a better understanding of the indirect energy input. The analysis addresses questions about the use of energy to produce and maintain agricultural machinery, the allocation of energy to different bioenergy products, and the real use and lifetime of machinery.     

The prospects for coal-to-liquid conversion: A general equilibrium analysis

We investigate the economics of coal-to-liquid (CTL) conversion, a polygeneration technology that produces liquid fuels, chemicals, and electricity by coal gasification and Fischer–Tropsch process. CTL is more expensive than extant technologies when producing the same bundle of output. In addition, the significant carbon footprint of CTL may raise environmental concerns. However, as petroleum prices rise, this technology becomes more attractive especially in coal-abundant countries such as the U.S. and China. Furthermore, including a carbon capture and storage (CCS) option could greatly reduce its CO₂ emissions at an added cost. To assess the prospects for CTL, we incorporate the engineering data for CTL from the U.S. Department of Energy (DOE) into the MIT Emissions Prediction and Policy Analysis (EPPA) model, a computable general equilibrium model of the global economy. Based on DOE’s plant design that focuses mainly on liquid fuels production, we find that without climate policy, CTL has the potential to account for up to a third of the global liquid fuels supply by 2050 and at that level would supply about 4.6% of global electricity demand. A tight global climate policy, on the other hand, severely limits the potential role of the CTL even with the CCS option, especially if low-carbon biofuels are available. Under such a policy, world demand for petroleum products is greatly reduced, depletion of conventional petroleum is slowed, and so the price increase in crude oil is less, making CTL much less competitive.     

Modelling the promotion of biomass use: A case study of Thailand

This study develops a computable general equilibrium model of the Thailand economy which features several energy-specific enhancements. The model is used to simulate a number of potential policies to achieve the Thai government’s biomass-generated electricity targets contained in its 15-year renewable energy development plan. Examples of simulations conducted with the model include increasing biomass-based electricity purchased from small and very small power producers and increasing other agricultural residue use in electricity generation. The results indicate that implementation of all of the biomass-based electricity promotion policies is likely to achieve the short-run target and reduce somewhat the importation of fuels. However, the policy causes a huge increase in prices of biomass. The sugarcane-based sectors are big winners, while the cassava-based sectors are big losers. The losses can, however, be partly mitigated by promoting other agricultural residue use in electricity generation.     

The future of biomass energy: A Fermi-calculation perspective

It is argued: (i) that the harvesting of terrestrial solar radiation to perform useful work is at least an order of magnitude more efficient when carried out by solar-thermal or solar-photovoltaic processes than when carried out by way of biomass conversion and (ii) that, therefore, biomass energy is unlikely to compete successfully with inanimately harvested solar energy—except of course in restricted niche applications.     

Energetic and exergetic aspects of cotton stalk production in establishing energy policies

Exergy analysis is important for energy resource utilization, because exergy, which is a way to a sustainable future, is a part of the energy analysis. Exergy analysis starts to play a role in several countries in developing energy policy. This paper deals with the exergetic assessment of the cotton stalk (CS) production. In this regard, Turkey, which is one of the eight countries producing 85% of the world's cotton, is given as an application country first. Energy and exergy relations used in the analysis are then presented. Finally, the Turkish CS production in 2003 is evaluated using energy and exergy analyses method, while the results obtained are discussed. The values for the net energy and exergy gained are obtained to be about 49,146 and 59,395 MJ/ha, respectively. Turkey's total energy and exergy are estimated to be 75.45 and 81.87 PJ. It may be concluded that this amount of energy is equal to 7.77% and 2.38% of Turkey's primary energy production and consumption in the same year, respectively. The overall mean energy and exergy efficiencies of the cotton production in the year studied are found to be 33.06% and 33.12%, respectively. It is also expected that the results of this study will be helpful in developing highly applicable and productive planning for energy policies.     

Hydrogen production by partial oxidative gasification of biomass and its model compounds in supercritical water

Partial oxidative gasification in supercritical water is a new technology for hydrogen production from biomass. Firstly in this paper, supercritical water partial oxidative gasification process was analyzed from the perspective of theory and chemical equilibrium gaseous product was calculated using the thermodynamic model. Secondly, the influence of oxidant equivalent ratio on partial oxidative gasification of model compounds (glucose, lignin) and real biomass (corn cob) in supercritical water was investigated in a fluidized bed system. Experimental results show that oxidant can improve the gasification efficiency, and an appropriate addition of oxidant can improve the yield of hydrogen in certain reaction condition. When ER equaled 0.4, the gasification efficiency of lignin was 3.1 times of that without oxidant. When ER equaled 0.1, the yield of hydrogen from lignin increased by 25.8% compared with that without oxidant. Thirdly, the effects of operation parameters including temperature, pressure, concentration, and flow rate of feedstock on the gasification were investigated. The optimal operation parameters for supercritical water partial oxidative gasification were obtained.     

Supply chain optimization of residual forestry biomass for bioenergy production: The case study of Portugal

Within a large set of renewable energies being explored to tackle energy sourcing problems, bioenergy can represent an attractive solution if effectively managed. The supply chain design supported by mathematical programming can be used as a decision support tool to the successful bioenergy production systems establishment. This strategic decision problem is addressed in this paper where we intent to study the design of the residual forestry biomass to bioelectricity production in the Portuguese context. In order to contribute to attain better solutions a mixed integer linear programming (MILP) model is developed and applied in order to optimize the design and planning of the bioenergy supply chain. While minimizing the total supply chain cost the production energy facilities capacity and location are defined. The model also includes the optimal selection of biomass amounts and sources, the transportation modes selection, and links that must be established for biomass transportation and products delivers to markets. Results illustrate the positive contribution of the mathematical programming approach to achieve viable economic solutions. Sensitivity analysis on the most uncertain parameters was performed: biomass availability, transportation costs, fixed operating costs and investment costs.     

Exergy analysis of hydrogen production from biomass gasification

For a given set of operating conditions, the hydrogen production from biomass gasification can be improved through optimization of the operating parameters and efficiencies. The present approach can predict hydrogen production via biomass gasification in a range of 10–32 kg/s from biomass (sawdust wood). The biomass is introduced to a gasifier at an operating temperature range of 1000–1500 K. Also, 4.5 kg/s of steam at 500 K is used as gasification medium. Results indicate that improvement in hydrogen production from biomass steam gasification depending on the amount of steam and quantity of biomass feeding to the gasifier as well the operating temperature. Over the range of feeding biomass, the hydrogen yield reaches 80–130 g H₂/kg biomass while in the operating temperature examined, the hydrogen yield reaches 80 g H₂/kg biomass. On mole basis it is found that, in the first range of H₂ varies from 51 to 63% in the studied range of feeding biomass in existing 4.5 kg/s from steam while H₂ gets to 51–53% in existing of 6.3 kg/s from steam.     

The future of bioenergy and rural development policies in Africa and Asia

This special issue has presented some of the specific findings of the RE-Impact Project which was commissioned and funded by the EuropeAid Cooperation Office from 2007 until its conclusion in 2010. The project aimed to provide impact assessment frameworks and influence relevant policies through direct involvement in bioenergy projects and policy analysis in South Africa, Uganda, India and China. The papers summarised here have covered issues related to Jatropha curcas and forest-based bioenergy in these countries. Taking an overall look at the project findings we can identify a number of general conclusions relevant for the future of bioenergy and rural development in Africa and Asia. First, only local and context-specific sustainability assessment can identify the risk and responsibilities of the different groups and the exact impact on the environment. Second, many initiatives both in biofuels and forest-based bioenergy are marred by a lack of understanding of the life-cycle financial analysis. Third, careful consideration of local physical and social conditions and the economics of the production chain can identify real opportunities for rural development using bioenergy. The current global impasse in bioenergy policies could actually be advantageous to the development of bioenergy in developing countries. Without the pressure from America and Europe to develop bioenergy systems for climate change mitigation, countries in Africa and Asia may have the breathing room to shape bioenergy systems for their own internal energy supply in an orderly fashion. However, in order to avoid environmental and social impacts it will be necessary to articulate together elements of a number of measures including market-based certification, national policy formulation, national legislation, impact assessments, sustainability planning, land use planning, research, monitoring and evaluation taking into account country and project specific sustainability criteria. Unfortunately, many of the countries in Africa and Asia where bioenergy can play an important role still lack institutional structures able to articulate this sustainable development.     

Evaluation of annual bioenergy crops in the boreal zone for biogas and ethanol production

Three annual plant species, maize, hemp and faba bean were tested for suitability as dedicated biomass crops in Boreal conditions. Biomass yields were 10-15 t ha^-1. The crops were analyzed for their composition and tested as raw materials for conversion to methane and to fermentable sugars. The methane yield was 379 ± 16 Ndm³ kg⁻¹ VS⁻¹ from maize, 387 ± 20 Ndm³ kg⁻¹ VS⁻¹ from faba bean and 239 ± 9 Ndm³ kg⁻¹ VS⁻¹ from hemp. Based on the yield per hectare, maize proved to be the most potential raw material source for methane production. Analogous to methane production, maize was the most productive raw material also in standard hydrolysis tests, with a conversion yield of about 80% of the theoretical sugars. Based on the amount of carbohydrates, the highest theoretical yield per hectare was obtained with hemp. However, considering all parameters, including the need for weeding and fertilizers, all three crops studied proved to be attractive options for cultivation in boreal conditions as well as being used as energy crops in boreal climate.     

Technologies and policies for the transition to a sustainable energy system in china

The paper highlights the energy dilemma in China’s modernization process. It explores the technological and policy options for the transition to a sustainable energy system in China with Tsinghua University’s Low Carbon Energy Model (LCEM). China has already taken intensive efforts to promote research, development, demonstration and commercialization of sustainable energy technologies over the past five year. The policy actions cover binding energy conservation and environmental pollution control targets, economic incentives for sustainable energy, and public R&D supports. In order to achieve the sustainable energy system transformation eventually, however, China needs to take further actions such as strengthening R&D of radically innovative sustainable energy technologies and systems such as poly-generation, enhancing the domestic manufacturing capacity of sustainable energy technologies and systems, creating stronger economic incentives for research, development, demonstration and commercialization of sustainable energy technologies, and playing a leading role in international technology collaborations.     

Agricultural biomass production is an energy option for the future

The production of agricultural biomass and its exploitation for energy purposes can contribute to alleviate several problems, such as the dependence on import of energy products, the production of food surpluses, the pollution provoked by the use of fossil fuels, the abandonment of land by farmers and the connected urbanization. Biomass is not at the moment competitive with mineral oil, but, taking into account also indirect costs and giving a value to the aforementioned advantages, public authorities at national and international level can spur its production and use by incentives of different nature. On long term perspective, technological innovation can improve the cost effectiveness of biomass production. For this purpose a new cycle of plant domestication is needed, in order to develop new plant genera, species or varieties yielding quantities of biomass higher than plants now cultivated for food production. The strategies and objectives of plant breeding for this domestication cycle are briefly discussed. Two specific cases of use of agricultural biomass for energy production can be considered as more feasible in the next future: the production of biodiesel from vegetable oil and the production of electricity from ligno-cellulosic biomass. Both possibilities are discussed from a technical and from an economical point of view.     

Analysis of the energy efficiency of solar aided biomass gasification for pure hydrogen production

This paper presents a simulative analysis of the energy efficiency of solar aided biomass gasification for pure hydrogen production. Solar heat has been considered as available at 250 °C in three gasification processes: i) gasification reactor followed by two water gas shift reactors and a pressure swing adsorber; ii) gasification reactor followed by an integrated membrane water gas shift reactor; iii) supercritical gasification reactor followed by two flash separators and a pressure swing adsorber.     

Assessing of energy policies based on Turkish agriculture:: current status and some implications

In this study, the current energy status of Turkey and the effects of national energy policies on Turkish agricultural support policies are discussed for both current and future requirements. Turkey is an energy-importing country producing 30 mtoe (million tons of oil equivalent) energy but consuming 80 mtoe. The energy import ratio of Turkey is 65–70% and the majority of this import is based on petroleum and natural gas. Furthermore, while world energy demand increases by 1.8% annually, Turkey’s energy demand increases by about 8%. Although energy consumption in agriculture is much lower than the other sectors in Turkey, energy use as both input and output of agricultural sector is a very important issue due to its large agricultural potential and rural area. Total agricultural land area is 27.8 million hectares and about 66.5% of this area is devoted for cereal production. On the other hand, Turkey has over 4 million agricultural farm holdings of which 70–75% is engaged in cereal production. Machinery expenses, mainly diesel, constitute 30–50% of total variable expenses in cereal production costs. It is observed that energy policies pursued in agriculture have been directly affected by diesel prices in Turkey. Therefore, support policy tools for using diesel and electricity in agriculture are being pursued by the Turkish government.