A promising NiCo2O4 protective coating for metallic interconnects of solid oxide fuel cells

The NiCo₂O₄ spinel coating is applied onto the surfaces of the SUS 430 ferritic stainless steel by the sol-gel process; and the coated alloy, together with the uncoated as a comparison, is cyclically oxidized in air at 800 °C for 200 h. The oxidation behavior and oxide scale microstructure as well as the electrical property are characterized. The results indicate that the oxidation resistance is significantly enhanced by the protective coating with a parabolic rate constant of 8.1 × 10⁻¹⁵ g² cm⁻⁴ s⁻¹, while the electrical conductivity is considerably improved due to inhibited growth of resistive Cr₂O₃ and the formation of conductive spinel phases in the oxide scale.     

A high energy Li-ion battery based on nanosized LiNi0.5Mn1.5O4 cathode material

The electrochemical performance of a Li-ion battery made from nanometric, highly crystalline LiNi_0.5Mn_1.5O₄ as positive electrode and mesoporous carbon microbeads (MCMBs) as negative electrode was assessed. The best performance was obtained by using a slight excess of spinel (a cathode/anode mole ratio of 1.3) and lithium bis-oxalate borate (LiBOB) instead of LiPF₆ as an electrolyte salt. Higher spinel contents caused the formation of metallic Li in the carbon and the rapid degradation of battery performance as a result. The calculated output energy was 322 Wh kg⁻¹ which is higher than the value reported for the LiMn₂O₄/C cell (250 Wh kg⁻¹).     

A cheap asymmetric supercapacitor with high energy at high power: Activated carbon//K0.27MnO2·0.6H2O

Studies of the electrochemical behavior of K_0.27MnO₂·0.6H₂O in K₂SO₄ show the reversible intercalation/deintercalation of K⁺-ions in the lattice. An asymmetric supercapacitor activated carbon (AC)/0.5 mol l⁻¹ K₂SO₄/K_0.27MnO₂·0.6H₂O was assembled and tested successfully. It shows an energy density of 25.3 Wh kg⁻¹ at a power density of 140 W kg⁻¹; at the same time it keeps a very good rate behavior with an energy density of 17.6 Wh kg⁻¹ at a power density of 2 kW kg⁻¹ based on the total mass of the active electrode materials, which is higher than that of AC/0.5 mol l⁻¹ Li₂SO₄/LiMn₂O₄. In addition, this asymmetric supercapacitor shows excellent cycling behavior without the need to remove oxygen from the electrolyte solution. This can be ascribed in part to the stability of the lamellar structure of K_0.27MnO₂·0.6H₂O. This asymmetric aqueous capacitor has great promise for practical applications due to high energy density at high power density.     

Nano-sized LiMn2O4 spinel cathode materials exhibiting high rate discharge capability for lithium-ion batteries

Nano-sized LiMn₂O₄ spinel with well crystallized homogeneous particles (60 nm) is synthesized by a resorcinol-formaldehyde route. Micro-sized LiMn₂O₄ spinel with micrometric particles (1 μm) is prepared by a conventional solid-state reaction. These two samples are characterized by XRD, SEM, TEM, BET, and electrochemical methods. At current rate of 0.2C (1C = 148 mA g⁻¹), a discharge capacity of 136 mAh g⁻¹ is obtained on the nano-sized LiMn₂O₄, which is higher than that of micro-sized one (103 mAh g⁻¹). Furthermore, compared to the micro-sized sample, nano-sized LiMn₂O₄ shows much better rate capability, i.e. a capacity of 85 mAh g⁻¹, 63% of that at 0.2C, is realized at 60C. The excellent high rate performance of nano-sized LiMn₂O₄ spinel may be attributed to its impurity-free nano-sized particles, higher surface area and well crystalline. The outstanding electrochemical performances demonstrate that the nano-sized LiMn₂O₄ spinel will be the promising cathode materials for high power lithium-ion batteries used in hybrid and electric vehicles.     

Electrochemical profile of an asymmetric supercapacitor using carbon-coated LiTi2(PO4)3 and active carbon electrodes

In this work, we reported an asymmetric supercapacitor in which active carbon (AC) was used as a positive electrode and carbon-coated LiTi₂(PO₄)₃ as a negative electrode in 1 M Li₂SO₄ aqueous electrolyte. The LiTi₂(PO₄)₃/AC hybrid supercapacitor showed a sloping voltage profile from 0.3 to 1.5 V, at an average voltage near 0.9 V, and delivered a capacity of 30 mAh g⁻¹ and an energy density of 27 Wh kg⁻¹ based on the total weight of the active electrode materials. It exhibited a desirable profile and maintained over 85% of its initial energy density after 1000 cycles. The hybrid supercapacitor also exhibited an excellent rate capability, even at a power density of 1000 W kg⁻¹, it had a specific energy 15 Wh kg⁻¹ compared with 24 Wh kg⁻¹ at the power density about 200 W kg⁻¹.     

Electrochemical capacitance of NiO/Ru0.35V0.65O2 asymmetric electrochemical capacitor

A designed asymmetric hybrid electrochemical capacitor was presented where NiO and Ru_0.35V_0.65O₂ as the positive and negative electrode, respectively, both stored charge through reversible faradic pseudocapacitive reactions of the anions (OH⁻) with electroactive materials. And the two electrodes had been individually tested in 1 M KOH aqueous electrolyte to define the adequate balance of the active materials in the hybrid system as well as the working voltage of the capacitor based on them. The electrochemical tests demonstrated that the maximum specific capacitance and energy density of the asymmetric hybrid electrochemical capacitor were 102.6 F g⁻¹ and 41.2 Wh kg⁻¹, respectively, delivered at a current density of 7.5 A cm⁻². And the specific energy density decreased to 23.0 Wh kg⁻¹ when the specific power density increased up to 1416.7 W kg⁻¹. The hybrid electrochemical capacitor also exhibited a good electrochemical stability with 83.5% of the initial capacitance over consecutive 1500 cycle numbers.     

CoFe2O4 spinel protection coating thermally converted from the electroplated Co-Fe alloy for solid oxide fuel cell interconnect application

CoFe₂O₄ has been demonstrated as a potential spinel coating for protecting the Cr-containing ferritic interconnects. This spinel had an electrical conductivity of 0.85 S cm⁻¹ at 800 °C in air and an average coefficient of thermal expansion (CTE) of 11.80 × 10⁻⁶ K⁻¹ from room temperature to 800 °C. A series of Co-Fe alloys were co-deposited onto the Crofer 22 APU ferritic steel via electroplating with an acidic chloride solution. After thermal oxidation in air at 800 °C, a CoFe₂O₄ spinel layer was attained from the plated Co_0.40Fe_0.60 film. Furthermore, a channeled Crofer 22 APU interconnect electrodeposited with a 40-μm Co_0.40Fe_0.60 alloy film as a protective coating was evaluated in a single-cell configuration. The presence of the dense, Cr-free CoFe₂O₄ spinel layer was effective in blocking the Cr migration/transport and thus contributed to the improvement in cell performance stability.     

Morphology and electrochemistry of LiMn2O4 optimized by using different Mn-sources

Spinel-typed LiMn₂O₄ cathode active materials have been prepared for different microstructures by the melt-impregnation method using different forms of manganese. The effect of the starting materials on the microstructure and electrochemical properties of LiMn₂O₄ is investigated by X-ray diffraction, scanning electron microscopy, and electrochemical measurements. The powder prepared from nanostructured γ-MnOOH, with good crystallinity and a regular cubic spinel shape, provided an initial discharge capacity of 114 mAh g⁻¹ with excellent rate and high capacity retention. These advantages render LiMn₂O₄ attractive for practical and large-scale applications in mobile equipment.     

Physical and photoelectrochemical studies for hydrogen photo-evolution over the spinel ZnCr2O4

The present work deals with the photoelectrochemical hydrogen production over the spinel ZnCr₂O₄. The photoactivity is dependent on the synthesis conditions and the oxide has been prepared by nitrate way in order to produce homogeneous powder with large active surface. The transport properties indicate p-type conductivity with activation energy of 0.21 eV. A corrosion potential of 0.404 V_SCE and an exchange current density of 50 μA cm⁻² have been determined from the semi logarithm plot. The photocurrent onset potential, assimilated to the flat band potential, was found to be −0.39 V_SCE. ZnCr₂O₄/S₂O₃²⁻ is a self driven system where absorption of light promotes electrons into the conduction band with a potential (−1 V) sufficient to reduce water into hydrogen. The activity shows a tendency toward saturation whose deceleration is the result of the competitive reductions of end products namely S₂O₆²⁻ and S₂O₄²⁻ with water. A comparative study with CuCr₂O₄ is reported.     

Electrodeposition and pseudocapacitive properties of tungsten oxide/polyaniline composite

Composite films of tungsten oxide (WO₃) and polyaniline (PANI) have been electrodeposited by cyclic voltammetry in a mixed solution of aniline and precursor of tungsten oxide. Surface morphology and chemical composition of WO₃/PANI composite are characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The influence of H₂O₂ on the electrodeposition of WO₃/PANI composite film is also investigated. Cyclic voltammetry (CV), chronopotentiometry (CP) and electrochemical impedance spectroscopy (EIS) results show that WO₃/PANI composite film exhibit good pseudocapacitive performance over a wide potential range of −0.5 to 0.7 V vs. SCE with the specific capacitance of 168 F g⁻¹ at current density of 1.28 mA cm⁻² and energy density of 33.6 Wh kg⁻¹, which is 91% higher than that of similarly prepared PANI (17.6 Wh kg⁻¹). An asymmetric model capacitor using WO₃/PANI as negative and PANI as positive electrodes over voltage range of 1.2 V displays a specific capacitance of 48.6 F g⁻¹ and energy density of 9.72 Wh kg⁻¹ at the power density of 53 W kg⁻¹, which is two times higher than that of a symmetric capacitor modeled by using two PANI films as both positive and negative electrodes.     

Characterization of MnFe2O4/LiMn2O4 aqueous asymmetric supercapacitor

A new type of asymmetric supercapacitor containing a MnFe₂O₄ negative electrode and a LiMn₂O₄ positive electrode in aqueous LiNO₃ electrolyte has been synthesized and characterized. The nanocrystalline MnFe₂O₄ anode material has a specific capacitance of 99 F g⁻¹ and the LiMn₂O₄ cathode a specific capacity of 130-100 mAh g⁻¹ under 10-100 C rate. The cell has a maximum operating voltage window of ca. 1.3 V, limited by irreversible reaction of MnFe₂O₄ toward reducing potential. The specific power and specific energy of the full-cell increase with increasing anode-to-cathode mass ratio (A/C) and saturate at A/C ∼4.0, which gives specific cell energies, based on total mass of the two electrodes, of 10 and 5.5 Wh kg⁻¹ at 0.3 and 1.8 kW kg⁻¹, respectively. The cell shows good cycling stability and exhibits significantly slower self-discharge rate than either the MnFe₂O₄ symmetric cell or the other asymmetric cells having the same cathode but different anode materials, including activated carbon fiber and MnO₂.     

LiCr0.2Ni0.4Mn1.4O4 spinels exhibiting huge rate capability at 25 and 55 °C: Analysis of the effect of the particle size

The comparison of the rate capability of LiCr_0.2Ni_0.4Mn_1.4O₄ spinels synthesized by the sucrose aided combustion method at 900, 950 and 1000 °C is presented. XRD and TEM studies show that the spinel cubic structure remains unchanged on heating but the particle size is notably modified. Indeed, it increases from 695 nm at 900 °C to 1465 nm at 1000 °C. The electrochemical properties have been evaluated by galvanostatic cycling at 25 and 55 °C between 1 C and 60 C discharge rates. At both temperatures, all samples exhibit high working voltage (∼4.7 V), elevated capacity (∼140 mAh g⁻¹) and high cyclability (capacity retention ∼99% after 50 cycles even at 55 °C). The samples also have huge rate capability. They retain more than 70% of their maximum capacity at the very fast rate of 60 C. The effect of the particle size on the rate capability at 25 and at 55 °C has been investigated. It was demonstrated that LiCr_0.2Ni_0.4Mn_1.4O₄ annealed at 900 °C, with the lowest particle size, has the best electrochemical performances. In fact, among the LiNi_0.5Mn_1.5O₄-based cathodes, SAC900 exhibits the highest rate capability ever published. This spinel, able to deliver 31,000 W kg⁻¹ at 25 °C and 27,500 W kg⁻¹ at 55 °C is a really promising cathode for high-power Li-ion battery.     

Facile fabrication of comb-like porous NiCo2O4 nanoneedles on Ni foam as an advanced electrode for high-performance supercapacitor

It is very desirable to develop the high-performance supercapacitors to meet the rapidly growing demands for energy-autonomous operation and miniaturization of devices. Herein, comb-like porous NiCo₂O₄ nanoneedles on the three-dimension (3D) nickel foam (NF) have been successfully synthesized through a facile pulsed laser ablation (PLA) approach without any post-treatments and surfactant (denoted as NiCo₂O₄-PLA). The influence of working solution during the fabricated process on the properties of NiCo₂O₄-PLA has been demonstrated in detail in terms of the crystalline structure, specific surface area, morphology, and electrochemical performance. Benefiting from the large specific surface (261.4 m² g⁻¹), abundant pores, and highly conductive scaffold, the NiCo₂O₄-PLA binder-free electrode exhibits an outstanding specific capacitance (1650 F g⁻¹ at a current density of 1 A g⁻¹) and eminent cycling performance (91.78% retention after a 12,000-cycle test at a current density of 10 A g⁻¹) compared with the control samples. The assembled asymmetric device (NiCo₂O₄-PLA//AC-ASCs) delivers the high specific capacitance of 126.9 F g⁻¹ at the current density of 1 A g⁻¹, the large energy density of 56.7 Wh kg⁻¹ at a power density of 756 W kg⁻¹, and the low internal resistance. The attractive results strongly prove that it is an ideal candidate for advanced supercapacitor application.     

Cerium and zinc: Dual-doped LiMn2O4 spinels as cathode material for use in lithium rechargeable batteries

Pristine spinel lithium manganese oxide (LiMn₂O₄) and zinc- and cerium-doped lithium manganese oxide [LiZn_xCe_yMn_2−x−yO₄ (x = 0.01–0.10; y = 0.10–0.01)] are synthesized for the first time via the sol–gel route using p-amino benzoic acid as a chelating agent to obtain micron-sized particles and enhanced electrochemical performance. The sol–gel route offers shorter heating time, better homogeneity and control over stoichiometry. The resulting spinel product is characterized through various methods such as thermogravimetic and differential thermal analysis (TG/DTA), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrochemical galvanostatic cycling studies. Charge–discharge studies of LiMn₂O₄ samples heated at 850 °C exhibit a discharge capacity of 122 mAh g⁻¹ and a corresponding 99% coulombic efficiency in the 1st cycle. The discharge capacity and cycling performance of LiZn_0.01Ce_0.01Mn_1.98O₄ is found to be superior (124 mAh g⁻¹), with a low capacity fade (0.1 mAh g⁻¹ cycle⁻¹) over the investigated 10 cycles.     

Urchin and sheaf-like NiCo2O4 nanostructures: Synthesis and electrochemical energy storage application

Spinel NiCo₂O₄ in different morphologies is of current interest in the design and development of electrochemical supercapacitors. In this work, we synthesized two different morphologies of NiCo₂O₄ by facile hydrothermal method employing CTAB as a soft template and urea as hydrolysis controlling agent. This study has been undertaken to determine the effect of synthesis temperature on the morphology and pseudocapacitance behavior of the NiCo₂O₄. We find that the temperature variation in the synthesis procedure has a strong effect on the morphology of NiCo₂O₄, producing urchin-like morphology at 120 °C (NiCoO-120-cal) and sheaf-like morphology at 200 °C (NiCoO-200-cal) with hierarchical porous textures. The effect of morphology on the electrochemical pseudocapacitance behavior was studied by CV, CP and EIS techniques. Both NiCo₂O₄ samples show higher electrochemical performance than the parent NiO and Co₃O₄ synthesized under similar conditions. The maximum specific capacitance values obtained for NiCoO-120-cal and NiCoO-200-cal are 636 and 504 F g⁻¹ respectively, at a current density of 0.5 A g⁻¹. The capacitance retention of NiCoO-120-cal and NiCoO-200-cal samples, respectively, are 76% and 69% after 1000 charge–discharge cycles at a current density of 1 A g⁻¹.     

Synthesis and rate performance of Fe3O4-based Cu nanostructured electrodes for Li ion batteries

Fe₃O₄-based Cu nanostructured electrodes for Li ion batteries are fabricated by a two-step electrochemical process, and characterized with scanning electron microscopy, X-ray diffraction, and electrochemical experiments. It is found that the electrochemical performance is closely related to the Fe₃O₄ morphology. The nanostructured electrodes with 1 min Fe₃O₄ deposition exhibit a large specific discharge capacity, i.e. 1342.23 mAh g⁻¹ in the first cycle and 1003.94 mAh g⁻¹ in the 34th. After extended Fe₃O₄ electroplating, Fe₃O₄ particles will fill the spaces between the Cu nanorods and coalesce on the top of the Cu nanorod arrays, which is detrimental to achieve high specific reversible capacities and good rate capability. Moreover, the nanostructured electrodes demonstrate significantly enhanced cycling performance due to the introduction of Cu nanorod arrays as the current collector, especially as compared to the planar electrodes where Fe₃O₄ is electrodeposited directly onto planar Cu surfaces.     

Visible light induced hydrogen evolution on new hetero-system ZnFe2O4/SrTiO3

The physical properties and photoelectrochemical characterization of the spinel ZnFe₂O₄, elaborated by chemical route, have been investigated for the hydrogen production under visible light. The forbidden band is found to be 1.92 eV and the transition is indirectly allowed. The electrical conduction occurs by small polaron hopping with activation energy of 0.20 eV. p-type conductivity is evidenced from positive thermopower and cathodic photocurrent. The flat band potential (0.18 V_SCE) determined from the capacitance measurements is suitably positioned with respect to H₂O/H₂ level (−0.85 V_SCE). Hence, ZnFe₂O₄ is found to be an efficient photocatalyst for hydrogen generation under visible light. The photoactivity increases significantly when the spinel is combined with a wide band gap semiconductor. The best performance with a hydrogen rate evolution of 9.2 cm³ h⁻¹ (mg catalyst)⁻¹ occurs over the new hetero-system ZnFe₂O₄/SrTiO₃ in Na₂S₂O₃ (0.025 M) solution.     

Controlled synthesis of NiCo2O4@Ni-MOF on Ni foam as efficient electrocatalyst for urea oxidation reaction and oxygen evolution reaction

Heterostructured materials with special interfaces and features give a unique character for much electrocatalytic process. In this work, the introduction of exogenous modifier Ni-MOF improved the reaction kinetics and morphology of the NiCo₂O₄@Ni-MOF/NF catalyst. As-obtained NiCo₂O₄@Ni-MOF/NF has excellent oxygen evolution reaction (OER) performance and urea oxidation reaction (UOR) performance. The catalyst need overpotential of 340 mV at a current density of 100 mA cm^?2 for OER and a potential of 1.31 V at the same current density for UOR. The Tafel slopes of NiCo₂O₄@Ni-MOF/NF is 38.34 and 15.33 mV dec^?1 for OER and UOR respectively, which is more superior than 78.58 and 66.73 mV dec^?1 of NiCo₂O₄/NF. The nanosheets microstructure is beneficial to the adsorption and transport of electrolyte and the presence of a large number of mesoporous channels can also accelerate gas release, and then improves activity of the catalyst. Density functional theory calculation demonstrate that NiCo₂O₄ plays a role in absorbing water, while the existence of in situ generated NiOOH can promote the electron transfer efficiency. It is synergies of NiCo₂O₄ and in situ generated NiOOH that enhance the decomposition of water on the surface of the NiCo₂O₄@Ni-MOF/NF. This investigation provides a new strategy for the application of spinel oxide and MOF materials.     

Influence of S and Ni co-doping on structure, band gap and electrochemical properties of lithium manganese oxide synthesized by soft chemical method

Ni-doped lithium manganese oxysulfides with a nominal composition of LiNi_xMn_2−xO_4−δS_δ (0 ≤ x ≤ 0.5 and 0 ≤ δ ≤ 0.1) have been synthesized by an alanine-assisted, low-temperature combustion process, followed by calcination at 700 °C in air. Quantitative X-ray phase analyses show that the spinel structure of LiMn₂O₄ is retained for all compositions. However, analysis of the vibrational peaks observed in Fourier transformed infrared (FTIR) spectroscopy suggests that the Fd3m crystal symmetry is retained only up to x ≤ 0.4 and changes to P4₃32 symmetry for x = 0.5. A systematic change in microstructure is observed with increasing Ni content in presence of S. The shape of the particles changes from spherical (LiMn₂O₄) to icosahedron (LiNi_0.2Mn_1.8O_4−δS_δ) to octahedron (LiNi_0.5Mn_1.5O_4−δS_δ). UV-vis spectroscopy shows that the band structure of pristine LiMn₂O₄ is strongly influenced by hybridization among Mn 3d and O 2p orbitals near the Fermi level and the band gap (1.45 eV) gradually decreases with increasing nickel content and reaches the minimum (1.35 eV) for LiNi_0.4Mn_1.6O_4−δS_δ. Electrochemical results on 2032 coin-type cells, fabricated with the synthesized powders as the positive electrode (cathode) and Li metal as the negative electrode (anode), reveal that the substitution of S for O and Ni for Mn in LiMn₂O₄ enhances the structural integrity of the spinel host, which in turn increases the electrochemical cycleability. A high initial discharge capacity of 155 mAh g⁻¹ is obtained for a LiNi_0.4Mn_1.6O_4−δS_δ/Li cell with about 87% capacity retention (135 mAh g⁻¹) after 25 cycles at a current density of 0.2 mA cm⁻². All LiNi_xMn_2−xO_4−δS_δ/Li cells (x = 0.2-0.5) show excellent reversibility with nominal capacity fading (0.04-0.2 mAh per cycle) at a current density of 0.2 mA cm⁻².     

NiMn2O4 spinel as an alternative coating material for metallic interconnects of intermediate temperature solid oxide fuel cells

In an effort to improve the performance of SUS 430 alloy as a metallic interconnect material, a low cost and Cr-free spinel coating of NiMn₂O₄ is prepared on SUS 430 alloy substrate by the sol-gel method and evaluated in terms of the microstructure, oxidation resistance and electrical conductivity. A oxide scale of 3-4 μm thick is formed during cyclic oxidation at 750 °C in air for 1000 h, consisting of an inner layer of doped Cr₂O₃ and an outer layer of doped NiMn₂O₄ and Mn₂O₃; and the growth of Cr₂O₃ and formation of MnCr₂O₄ are depressed. The oxidation kinetics obeys the parabolic law with a rate constant as low as 4.59 × 10⁻¹⁵ g² cm⁻⁴ s⁻¹. The area specific resistance at temperatures between 600 and 800 °C is in the range of 6 and 17 mΩ cm². The above results indicate that NiMn₂O₄ is a promising coating material for metallic interconnects of the intermediate temperature solid oxide fuel cells.