Crosslinked sulfonated poly(ether ether ketone) proton exchange membranes for direct methanol fuel cell applications

In the present study, a series of the crosslinked sulfonated poly(ether ether ketone) (SPEEK) proton exchange membranes were prepared. The photochemical crosslinking of the SPEEK membranes was carried out by dissolving benzophenone and triethylamine photo-initiator system in the membrane casting solution and then exposing the resulting membranes after solvent evaporation to UV light. The physical and transport properties of crosslinked membranes were investigated. The membrane performance can be controlled by adjusting the photoirradiation time. The experimental results showed that the crosslinked SPEEK membranes with photoirradiation 10 min had the optimum performance for proton exchange membranes (PEMs). Compared with the non-crosslinked SPEEK membranes, the crosslinked SPEEK membranes with photoirradiation 10 min markedly improved thermal stabilities and mechanical properties as well as hydrolytic and oxidative stabilities, greatly reduced water uptake and methanol diffusion coefficients with only slight sacrifice in proton conductivities. Therefore, the crosslinked SPEEK membranes with photoirradiation 10 min were particularly promising as proton exchange membranes for direct methanol fuel cell (DMFC) applications.     

Sulfonated poly(ether ether ketone) membranes with sulfonated graphene oxide fillers for direct methanol fuel cells

Sulfonated organosilane functionalized graphene oxides (SSi-GO) synthesized through the grafting of graphene oxide (GO) with 3-mercaptopropyl trimethoxysilane and subsequent oxidation have been used as a filler in sulfonated poly(ether ether ketone) (SPEEK) membranes. The incorporation of SSi-GOs greatly increases the ion-exchange capacity (IEC), water uptake, and proton conductivity of the membrane. With well-controlled contents of SSi-GOs, the composite membranes exhibit higher proton conductivity and lower methanol permeability than Nafion^® 112 and Nafion^® 115, making them particularly attractive as proton exchange membranes (PEMs) for direct methanol fuel cells (DMFC). The composite membrane with optimal SSi-GOs content exhibit over 38 and 17% higher power densities, respectively, than Nafion^® 112 and Nafion^® 115 membranes in DMFCs, offering the possibilities to reduce the DMFC membrane cost significantly while keeping high-performance.     

Preparation of nitrated sulfonated poly(ether ether ketone) membranes for reducing methanol permeability in direct methanol fuel cell applications

Sulfonated poly(ether ether ketone)s (SPEEKs) were further substituted on the polymer main chain by nitration. All sulfonation and nitration were achieved with an inexpensive and simple post substitute reaction. The nitrated SPEEKs have a high glass transition temperature and thermal decomposition temperature, and a lower water uptake than SPEEK, which provides sufficient mechanical strength without swelling in the direct methanol fuel cell (DMFC) application. The methanol permeability of nitrated SPEEKS is reduced to 1.76 × 10⁻⁷ cm² s⁻¹ for S53N22 and 1.86 × 10⁻⁷ cm² s⁻¹ for S63N17 with no loss of conductivity in the DMFC application, and a proton conductivity that reached 0.026 S cm⁻¹. The nitrated SPEEK membranes satisfy the requirements of proton-exchange membranes for the DMFC.     

Sulfonated poly(ether ether ketone) as an ionomer for direct methanol fuel cell electrodes

Sulfonated poly(ether ether ketone) has been investigated as an ionomer in the catalyst layer for direct methanol fuel cells (DMFC). The performance in DMFC, electrochemical active area (by cyclic voltammetry), and limiting capacitance (by impedance spectroscopy) have been evaluated as a function of the ion exchange capacity (IEC) and content (wt.%) of the SPEEK ionomer in the catalyst layer. The optimum IEC value and SPEEK ionomer content in the electrodes are found to be, respectively, 1.33 meq. g⁻¹ and 20 wt.%. The membrane-electrode assemblies (MEA) fabricated with SPEEK membrane and SPEEK ionomer in the electrodes are found to exhibit superior performance in DMFC compared to that fabricated with Nafion ionomer due to lower interfacial resistance in the MEA as well as larger electrochemical active area. The MEAs with SPEEK membrane and SPEEK ionomer also exhibit better performance than that with Nafion 115 membrane and Nafion ionomer due to lower methanol crossover and better electrode kinetics.     

Preparation of main-chain-type and side-chain-type sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell applications

Novel main-chain-type and side-chain-type sulphonated poly(ether ether ketone)s (MS-SPEEKs) are synthesised by reacting the sulphonic acid groups of pristine SPEEKs with 2-aminoethanesulphonic acid to improve the nano-phase separated morphology of the material. ¹H NMR and FT-IR spectroscopy are employed to determine the structure and composition of main-chain-type and side-chain-type sulphonated polymers. Flexible and tough membranes with reasonable thermal properties are obtained. The MS-SPEEKs show good hydrolytic stability, and water uptake values ranging from 15% to 30% are observed. Compared to Nafion 117^®, the methanol permeability of the MS-SPEEKs is dramatically reduced to 8.83 × 10⁻⁸ cm² s⁻¹ to 3.31 × 10⁻⁷ cm² s⁻¹. The proton conductivity increases with increasing temperature, reaching 0.013-0.182 S cm⁻¹. A maximum power density and open circuit voltage of 115 mW cm⁻² and 0.830 V are obtained at 80 °C, respectively, which is significantly greater than the values generated with Nafion 117^®. The introduction of pendent side-chain-type sulphonic acid groups increases the single-cell performance by more than approximately 20%; thus, the lower water diffusivity, methanol permeability, electro-osmotic drag coefficient and high cell performance indicated that MS-SPEEK is a promising candidate for DMFC applications.     

Nafion/nitrated sulfonated poly(ether ether ketone) membranes for direct methanol fuel cells

Sulfonated poly(ether ether ketone)s (SPEEKs) are substituted on the main chain of the polymer by nitro groups and blended with Nafion^® to attain composite membranes. The sulfonation, nitration and blending are achieved with a simple, inexpensive process, and the blended membranes containing the nitrated SPEEKs reveal a liquid-liquid phase separation. The blended membranes have a lower water uptake compared to recast Nafion^®, and the methanol permeability is reduced significantly to 4.29 × 10⁻⁷-5.34 × 10⁻⁷ cm² s⁻¹ for various contents of nitrated SPEEK for S63N17, and 4.72 × 10⁻⁷-7.11 × 10⁻⁷ cm² s⁻¹ for S63N38, with a maximum proton conductivity of ∼0.085 S cm⁻¹. This study examines the single-cell performance at 80 °C of Nafion^®/nitrated SPEEK membranes with various contents of nitrated SPEEK and a degree of nitration of 23-25 mW cm⁻² for S63N17 and 24-29 mW cm⁻² for S63N38. Both the power density and open circuit voltage are higher than those of Nafion^® 115 and recast Nafion^®.     

Investigation of the effects of AMPS-modified nanoclay on fuel cell performance of sulfonated aromatic proton exchange membranes

Here we describe preparation and characterization of a series of nanocomposite polyelectrolytes based on partially sulfonated poly (ether ether ketone) (SPEEK) and organically modified montmorillonite (MMT). Optimum degree of sulfonation for SPEEK is selected based on its transport properties. MMT is modified via ion exchange reaction using a 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as a functional modifier. AMPS-MMT at different loadings is introduced into the SPEEK matrices via the solution intercalation technique. Also, the nanocomposite membranes are fabricated using SPEEK and commercially available nanoclays like Cloisite Na (Na-MMT) and Cloisite 15A. Transport properties, proton conductivity and methanol permeability of the fabricated composite membranes are evaluated. Presence of AMPS-MMT significantly decreases the activation energy needed for proton conductivity. A membrane based on SPEEK/AMPS-MMT-3 wt% is selected as an optimum formulation which exhibits a high selectivity and power density at the elevated methanol concentrations. Moreover, it is found that the optimum nanocomposite membrane not only provides higher power output compared to the neat SPEEK and Nafion^®117 membranes, but also exhibits a higher open circuit voltage (OCV) in comparison with pristine SPEEK and commercial Nafion^® 117 membranes. Owing to the desirable transport and electrochemical properties SPEEK/AMPS-MMT nanocomposite can be considered as an alternative membrane for direct methanol fuel cell applications.     

The effective methanol-blocking and proton conductivity membranes based on sulfonated poly (ether ether ketone ketone) and polyorganosilicon with functional groups

To solve the conflict between high proton conductivity and low methanol crossover of pristine sulfonated aromatic polymer membranes, the polyorganosilicon doped sulfonated poly (ether ether ketone ketone) (SPEEKK) composite membranes were prepared by introducing polyorganosilicon additive with various functional groups into SPEEKK in this study. Scanning electron microcopy (SEM) images showed the obtained membranes were compact. No apparent agglomerations, cracks and pinholes were observed in the SEM images of composite membranes. The good compatibility between polymer and additive led to the interconnection, thus producing new materials with great characteristics and enhanced performance. Besides, the dual crosslinked structure could be formed in composite membranes through the condensation of silanols and the strong interaction between matrix and additive. The formation of dual crosslinked structure optimized the water absorption, enhanced the hydrolytic stability and oxidative stability of membranes. Especially, the incorporation of additive improved the strength and flexibility of composite membranes at the same time, meaning that the life of the composite membranes might be extended during the fuel cell operation. Meanwhile, the proton conductivity improved with increasing additive content due to the loading of more available acidic groups. It is noteworthy that at 25% additive loading, the proton conductivity reached a maximum value of 5.4 × 10⁻² S cm⁻¹ at 25 °C, which exceeded the corresponding value of Nafion^@ 117 (5.0 × 10⁻² S cm⁻¹) under same experimental conditions. The composite membrane with 20 wt% additive was found to produce the highest selectivity (1.22 × 10⁵ S cm⁻³) with proton conductivity of 4.70 × 10⁻² S cm⁻¹ and methanol diffusion coefficient of 3.85 × 10⁻⁷ cm² s⁻¹, suggesting its best potential as proton exchange membrane for direct methanol fuel cell application. The main novelty of our work is providing a feasible and environment-friendly way to prepare the self-made polyorganosilicon with various functional groups and introducing it into SPEEKK to fabricate the dual crosslinked membranes. This design produces new materials with outstanding performance.     

Self-humidifying nanocomposite membranes based on sulfonated poly(ether ether ketone) and heteropolyacid supported Pt catalyst for fuel cells

In the present study, the self-humidifying nanocomposite membranes based on sPEEK and Cs_2.5H_0.5PW₁₂O₄₀ supported Pt catalyst (Pt-Cs_2.5H_0.5PW₁₂O₄₀ catalyst or Pt-Cs_2.5) and their performance in proton exchange membrane fuel cells with dry reactants has been investigated. The XRD, FTIR, SEM-EDXA and TEM analysis were conducted to characterize the catalyst and membrane structure. The ion exchange capacity (IEC), water uptake and proton conductivity measurements indicated that the sPEEK/Pt-Cs_2.5 self-humidifying nanocomposite membranes have higher water absorption, acid and proton-conductive properties compared to the plain sPEEK membrane and Nafion-117 membrane due to the highly hygroscopic and acidy properties of Pt-Cs_2.5 catalyst. The single cells employing the sPEEK/Pt-Cs_2.5 self-humidifying nanocomposite membranes exhibited higher cell OCV values and cell performances than those of plain sPEEK membrane and Nafion-117 membrane under dry or wet conditions. Furthermore, the sPEEK/Pt-Cs_2.5 self-humidifying nanocomposite membranes showed good water stability in aqueous medium. After investigation of several membranes such as sPEEK and sPEEK/Pt-Cs_2.5 membranes, the self-humidifying nanocomposite membrane with sulfonation degree of 65.12% for its sPEEK and 15 wt.% of catalyst with 1.25 wt.% Pt within catalyst was found to be the best proton exchange membrane for fuel cell applications. This self-humidifying nanocomposite membrane has a higher single cell performance than the Nafion-117 which was frequently used as a proton exchange membrane for fuel cell applications.     

Water-alcohol dispersible and self-cross-linkable sulfonated poly(ether ether ketone): Application as ionomer for direct methanol fuel cell catalyst layer

A sulfonated poly(ether ether ketone) containing hydroxyl groups (HO-SPEEK) has been synthesized for investigation as the ionomer in cathode of direct methanol fuel cells. Na salt-formed HO-SPEEK shows excellent solubility in some aqueous solutions of monohydric alcohol and can be successfully self-cross-linked in-situ during the hot-pressing process of membrane-electrode assembly (MEA) fabrication. The resulted cross-linked HO-SPEEK displays improved stability and mechanical strength. MEA incorporating the HO-SPEEK as both membrane and ionomer shows excellent peak power density of 29.0 mW cm⁻² at 25 °C with 4 M methanol, which is comparable to the Nafion reference MEA (31.8 mW cm⁻²) and 2.9-fold higher than that of the MEA prepared from catalyst ink that contained dimethyl sulfoxide (10.3 mW cm⁻²). Thanks to the avoidance of high-boiling point solvent, the resulted HO-SPEEK-based cathode is loosened with many large pores for reactant gas and product transportation. These results demonstrate that water-alcohol dispersible and cross-linkable sulfonated hydrocarbons hold technological promise as ionomer for electrode.     

Cross-linked membranes based on sulfonated poly (ether ether ketone) (SPEEK)/Nafion for direct methanol fuel cells (DMFCs)

A series of cross-linked membranes based on SPEEK/Nafion have been prepared to improve methanol resistance and dimension stability of SPEEK membrane for the usage in the direct methanol fuel cells (DMFCs). Sulfonated diamine monomer is synthesized and used as cross-linker to improve the dispersion of Nafion in the composite membranes and decrease the negative effect of cross-linking on proton conductivity of membranes. FT-IR analysis shows that the cross-linking reaction is performed successfully. The effects of different contents of Nafion on the properties of cross-linked membranes are investigated in detail. All the cross-linked membranes show lower methanol permeability and better dimensional stability compared with the pristine SPEEK membrane. SPEEK-N30 with the 30 wt % Nafion shows a methanol permeability of 0.73 × 10⁻⁶ cm² s⁻¹ and a water uptake of 24.4% at 25 °C, which are lower than those of the pristine membrane. Meanwhile, the proton conductivity of SPEEK-N30 still remains at 0.041 S cm⁻¹ at 25 °C, which is comparable to that of the pristine SPEEK membrane. All the results indicate that these cross-linked membranes based on SPEEK/Nafion show good prospect for the use as proton exchange membranes.     

SPEEK/sulfonated cyclodextrin blend membranes for direct methanol fuel cell

In this paper, the blend membranes based on sulfonated poly(ether ether ketone) and sulfonated cyclodextrin as the proton conducting membranes for DMFCs usage are prepared and investigated. The incorporation of sulfonated cyclodextrin in SPEEK membranes is evaluated by the characteristic absorptions of FT-IR spectra. Thermal stability and micro-morphology of the blend membranes are determined by thermogravimetry analysis and scanning electron microscope tests. The properties of the blend membranes are investigated such as swelling behavior, methanol permeability and proton conduction as function of the fraction of sulfonated cyclodextrin. The methanol crossover could be suppressed by the incorporation of sulfonated cyclodextrin and the methanol permeability decreases when the methanol concentration increases from 2.5 M to 20 M. Proton conduction is also promoted by the introduction of sulfonated cyclodextrin and the proton conductivity increases with the increase of sulfonated cyclodextrin content. The calculated activation energy for proton conduction of the blend membranes is very low and the maximum value is 4.20 kJ mol⁻¹, which is much lower than that of Nafion 115 (9.15 kJ mol⁻¹, measured in our experiments). These data indicate that proton can transport easily through the blend membranes. The selectivity of the blend membranes, a compromise between proton conductivity and methanol permeability, is much higher than that of Nafion 115 at the sulfonated cyclodextrin content above 15 wt.%. The blend membranes with 15, 20, and 25 wt.% of sulfonated cyclodextrin are assembled in the practical DMFCs and their polarization curves with 2.5 M and 8.0 M methanol solution are determined, respectively. The membrane with 20 wt.% sulfonated cyclodextrin reaches the highest power density of 29.52 mW cm⁻² at 120 mA cm⁻² and 8.0 M methanol solution. These results suggest the potential usage of the SPEEK membranes incorporating with sulfonated cyclodextrin in DMFCs.     

Novel modification method to prepare crosslinked sulfonated poly(ether ether ketone)/silica hybrid membranes for fuel cells

Crosslinked organic-inorganic hybrid membranes are prepared from hydroxyl-functionalized sulfonated poly(ether ether ketone) (SPEEK) and various amounts of silica with the aims to improve dimensional stability and methanol resistance. The partially hydroxyl-functionalized SPEEK is prepared by the reduction of some benzophenone moieties of SPEEK into the corresponding benzhydrol moieties which is then reacted with (3-isocyanatopropyl)triethoxysilane (ICPTES) to get a side chained polymer bearing triethoxysilyl groups. These groups are subsequently co-hydrolyzed with tetraethoxysilane (TEOS) and allow the membrane to form a crosslinked network via a sol-gel process. The obtained hybrid membranes with covalent bonds between organic and inorganic phases exhibit much lower methanol swelling ratio and water uptake. With the increase of silica content, the methanol permeability coefficient of the hybrid membranes decreases at first and then increased. At silica content of about 6 wt.%, the methanol permeability coefficient reaches a minimum of 7.15 × 10⁻⁷ cm² s⁻¹, a 5-fold decrease compared with that of the pristine SPEEK. Despite the fact that the proton conductivity is decreased to some extent as a result of introduction of the silica, the hybrid membranes with silica content of 4-8 wt.% shows higher selectivity than Nafion117.     

Sulfonated titania submicrospheres-doped sulfonated poly(ether ether ketone) hybrid membranes with enhanced proton conductivity and reduced methanol permeability

Sulfonated titania submicrospheres (TiO₂-SO₃H) prepared through a facile chelation method are incorporated into sulfonated poly(ether ether ketone) (SPEEK) to fabricate organic-inorganic hybrid membranes with enhanced proton conductivity and reduced methanol permeability for potential use in direct methanol fuel cells (DMFCs). The pristine titania submicrospheres (TiO₂) with a uniform particle size are synthesized through a modified sol-gel method and sulfonated using 4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt as the sulfonation reagent. The sulfonation process is confirmed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectra (XPS). The hybrid membranes are systematically characterized in terms of thermal property, mechanical property, ionic exchange capacity (IEC), swelling behavior, and microstructural features. The methanol barrier property and the proton conductivity of the SPEEK/TiO₂-SO₃H hybrid membranes are evaluated. The presence of the fillers reduces methanol crossover through the membrane. Compared with the unsulfonated TiO₂-doped membranes, the TiO₂-SO₃H-doped ones exhibit higher proton conductivity due to the additional sulfonic acid groups on the surface of TiO₂. The hybrid membrane doped with 15 wt.% TiO₂-SO₃H submicrospheres exhibits an acceptable proton conductivity of 0.053 S cm⁻¹ and a reduced methanol permeability of 4.19 × 10⁻⁷ cm² s⁻¹.     

A facile,effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)

The development of hydrocarbon polymer electrolyte membranes with high proton conductivities and good stability as alternatives to perfluorosulfonic acid membranes is an ongoing research effort. A facile and effective thermal crosslinking method was carried out on the blended sulfonated poly (ether ether ketone)/poly (aryl ether sulfone) (SPEEK/SPAES) system. Two SPEEK polymers with ion exchange capacities (IECs) of 1.6 and 2.0 mmol g^?1 and one SPAES polymer (2.0 mmol g^?1) were selected to create different blends. The effect of thermal crosslinking on the fundamental properties of the membranes, especially their physicochemical stability and electrochemical performance, were investigated in detail. The homogeneous and flexible thermally-crosslinked SPEEK/SPAES membranes displayed excellent mechanical toughness (27–46 Mpa), suitable water uptake (<60%), high dimensional stability (swelling ratio < 15%) and large proton conductivity (>120 mS cm^?1) at 80 °C. The thermal crosslinking membranes also show significantly enhanced hydrolytic (<2.5%) and oxidative stability (<2%). Fuel cell with t-SPEEK/SPAES (1:2:2) membrane achieves a power density of 665 mW cm^?2 at 80 °C.     

Molecular structure and transport dynamics in Nafion and sulfonated poly(ether ether ketone ketone) membranes

An atomistic simulation technique is performed to investigate the molecular structure and transport dynamics inside a hydrated Nafion membrane and a hydrated sulfonated poly(ether ether ketone ketone) (SPEEKK) membrane. The simulation system consists of the representative fragments of the polymer electrolytes, hydronium ions and solvent molecules, such as water plus methanol molecules. Simulation results show that the hydrated SPEEKK has less phase separation among hydrophobic and hydrophilic regions in comparison with the Nafion. Those water channels formed in the SPEEKK are much narrower compared to those in the Nafion. These characteristics lead to a lower mobility of hydronium ions and water molecules and hence relatively lower diffusion coefficient of methanol in the SPEEKK. It results in the reduction of the methanol permeation problem in direct methanol fuel cells.     

Sulfonated poly(ether ether ketone)/poly(ether sulfone) composite membranes as an alternative proton exchange membrane in microbial fuel cells

Custom-made proton exchange membranes (PEM) are synthesized by incorporating sulfonated poly(ether ether ketone) (SPEEK) in poly(ether sulfone) (PES) for electricity generation in microbial fuel cells (MFCs). The composite PES/SPEEK membranes at various composition of SPEEK are prepared by the phase inversion method. The membranes are characterized by measuring roughness, proton conductivity, oxygen diffusion, water crossover and electrochemical impedance. The conductivity of hydrophobic PES membrane increases when a small amount (3–5%) of hydrophilic SPEEK is added. The electrochemical impedance spectra shows that the conductivity and capacitance of PES/SPEEK composite membranes during MFC operation are reduced from 6.15 × 10⁻⁷ to 6.93 × 10⁻⁵ (3197 Ω–162 Ω) and from 3.00 × 10⁻⁷ to 1.56 × 10⁻³ F, respectively when 5% of SPEEK added into PES membrane. The PES/SPEEK 5% membrane has the highest performance compared to other membranes with a maximum power density of 170 mW m⁻² at the maximum current density of 340 mA m⁻². However, the interfacial reaction between the membrane and the cathode with Pt catalyst indicates moderate reaction efficiency compared to other membranes. The COD removal efficiency of MFCs with composite membrane PES/SPEEK 5% is nearly 26-fold and 2-fold higher than that of MFCs with Nafion 112 and Nafion 117 membranes respectively. The results suggest that the PES/SPEEK composite membrane is a promising alternative to the costly perfluorosulfonate membranes presently used as separators in MFC systems.     

Optimal thermal treatment conditions for durability improvement of highly sulfonated poly(ether ether ketone) membrane for polymer electrolyte fuel cell applications

In this study, a series of sulfonated poly(ether ether ketone) (SPEEK) membranes are prepared and thermally treated in different conditions, i.e., temperature (120–180 °C), time (6–42 h), and residual solvent (RS) values (15–45%). Proton conductivity, water uptake, swelling ratio, hydrogen permeability, mechanical properties, and chemical stability of samples are systematically investigated. Also, membranes' characteristics are studied using FTIR, TGA, and AFM. Two stages of “annealing dominated” and “cross-linking dominated” were observed during thermal treatment. Annealing dominated samples exhibited higher flexibility and overall stability with annealing-induced homogenous microstructure while cross-linking dominated samples showed poor mechanical properties and proton conductivity. Results indicate that the treatment of SPEEK membranes with higher RS value facilitates cross-linking at much lower temperatures with a more controlled rate to inhibit excessive cross-linking. Furthermore, response surface methodology suggested that prolonged thermal treatment at low temperatures (<130 °C) with RS of around 30% results in sufficient proton conductivity and improved overall stability.     

Novel cross-linked sulfonated poly (arylene ether ketone) membranes for direct methanol fuel cell

To prepare a cross-linked proton exchange membrane with low methanol permeability and high proton conductivity, poly (vinyl alcohol) is first blended with sulfonated poly (arylene ether ketone) bearing carboxylic acid groups (SPAEK-C) and then heated to induce a cross-linking reaction between the carboxyl groups in SPAEK-C and the hydroxyl groups in PVA. Fourier transform infrared spectroscopy is used to characterize and confirm the structure of SPAEK-C and the cross-linked membranes. The proton conductivity of the cross-linked membrane with 15% PVA in weight reaches up to 0.18 S cm⁻¹ at 80 °C (100% relative humidity), which is higher than that of Nafion membrane, while the methanol permeability is nearly five times lower than Nafion. The ion-exchange capacity, water uptake and thermal stability are investigated to confirm their applicability in fuel cells.     

Proton-conducting membranes based on benzimidazole-containing sulfonated poly(ether ether ketone) compared with their carboxyl acid form

A series of sulfonated poly(ether ether ketone) containing pendant carboxyl (C-SPEEKs) have been synthesized using a nucleophilic polycondesation reaction. A condensation reaction between 1,2-diaminobenzene and carboxyl resulted in a new series of copolymers containing benzimidazole groups (SPEEK-BIms). The expected structures of the sulfonated copolymers are confirmed by ¹H NMR. The dependence of ion exchange capacity, water uptake, proton conductivity and methanol diffusion coefficient of SPEEK-BIm membranes has been studied and compared with their carboxyl acid form. The results suggest that the introduction of benzimidazole groups may be responsible for many excellent properties of the membranes for fuel cell. It is noticeable that the markedly improved oxidative stability is benefit for the application of membrane.