Vertical operation of passive direct methanol fuel cell employing a porous carbon plate

Vertical operation of a passive DMFC employing a porous carbon plate, PCP, with different resistances for fluid flow and bubble point pressure was investigated to clarify the properties required for the PCP for vertical operation. Moreover, the cell performance was investigated under different solution head pressures within 22 mm height and was discussed based on the methanol transport through the PCP. In contrast to the horizontal orientation, the static pressure of the liquid as a function of its height on the vertical axis h along the PCP surface, in the vertical orientation, enhanced the convective methanol flux through the PCP and affected the DMFC performance depending on the properties of the PCP and the methanol concentration used. The effect of the solution head pressure on the DMFC performance in the vertical orientation could be controlled by using PCP with high bubble point pressures. The DMFC could attain stable performance under both horizontal and vertical cell orientations and different solution head pressures even with 100% methanol by using a PCP with the proper resistance for the methanol transport and bubble point pressure. A thin PCP of 0.5 mm thickness with the proper resistance enabled the vertical operation producing a constant power density over 40 mW/cm² using 100% methanol at 0.25 V.     

Factors affecting methanol transport in a passive DMFC employing a porous carbon plate

The effect of the pore structure and thickness of the porous carbon plate, PCP, as well as the gas barrier thickness on the methanol transport and the performance of a passive DMFC under the different cell voltages of 0.1, 0.2 and 0.3 V using different methanol concentrations was investigated. As a result of the mass transfer restrictions by employing the PCP, high methanol concentrations over 20 M could be efficiently used to produce the relatively high power density of 30 mW cm⁻² for more than 10 h. The DMFC was operated under limiting current conditions in all the PCPs at 0.1 and 0.2 V to more than 20 M. The main factors for controlling the methanol transport were the barrier of the gas layer with CO₂, which was formed between the anode surface and the PCP and the properties of the PCP. At the low current densities of less than 60 mA cm⁻², when no CO₂ bubbles are emitted, both the pore structure and thickness of the PCP did not affect the methanol transport and the current voltage relationship. At the higher current densities, CO₂ bubbles were evolved through the PCP and different resistances to the methanol transport were observed depending on the PCP pore structure and thickness. The CO₂ gas layer between the MEA and the PCP caused a major resistivity for the methanol transport, and its resistivity increased with its thickness increasing. By using the PCP at 0.1 V, the energy density of the passive DMFC was significantly increased, e.g., more than seven times.     

A small mono-polar direct methanol fuel cell stack with passive operation

A passive direct methanol fuel cell (DMFC) stack that consists of six unit cells was designed, fabricated, and tested. The stack was tested with different methanol concentrations under ambient conditions. It was found that the stack performance increased when the methanol concentration inside the fuel tank was increased from 2.0 to 6.0 M. The improved performance is primarily due to the increased cell temperature as a result of the exothermic reaction between the permeated methanol and oxygen on the cathode. Moreover, the increased cell temperature enhanced the water evaporation rate on the air-breathing cathode, which significantly reduced water flooding on the cathode and further improved the stack performance. This passive DMFC stack, providing 350 mW at 1.8 V, was successfully applied to power a seagull display kit. The seagull display kit can continuously run for about 4 h on a single charge of 25 cm³ 4.0-M methanol solution.     

Single passive direct methanol fuel cell supplied with pure methanol

A new single passive direct methanol fuel cell (DMFC) supplied with pure methanol is designed, assembled and tested using a pervaporation membrane (PM) to control the methanol transport. The effect of the PM size on the fuel cell performances and the constant current discharge of the fuel cell with one-fueling are studied. The results show that the fuel cell with PM 9 cm² can yield a maximum power density of about 21 mW cm⁻², and a stable performances at a discharge current of 100 mA can last about 45 h. Compared with DMFC supplied with 3 M methanol solution, the energy density provided by this new DMFC has increased about 6 times.     

Performance characteristics of a novel tubular-shaped passive direct methanol fuel cell

The present work consists of a tubular-shaped direct methanol fuel cell (DMFC) that is operated completely passively with methanol solution stored in a central fuel reservoir. The benefit of a tubular-shaped DMFC over a planar-shaped DMFC is the higher instantaneous volumetric power energy density (power/volume) associated with the larger active area provided by the tubular geometry. Membrane electrode assemblies (MEAs) with identical compositions were installed in both tubular and planar-shaped, passive DMFCs and tested with 1, 2, and 3 M methanol solutions at room temperature. The peak power density for the tubular DMFC was 19.0 mW cm⁻² and 24.5 mW cm⁻² while the peak power density for the planar DMFC was 20.0 mW cm⁻² and 23.0 mW cm⁻² with Nafion^® 212 and 115 MEAs, respectively. Even though the performance of the fuel cell improved with each increase in methanol concentration, the fuel and energy efficiencies decreased for both the tubular and planar geometries due to increased methanol crossover. The tubular DMFC experienced higher methanol crossover potentially due to a higher static fluid pressure in the anode fuel reservoir (AFR) caused by the vertical orientation of the tubular fuel reservoir. The performance of the tubular DMFC in this work represents an 870% improvement in power density from the previous best, passive, tubular DMFC found in the literature.     

Reaction analysis of a direct methanol fuel cell employing a porous carbon plate operated at high methanol concentrations

It is known that a small amount of intermediate products, i.e., formaldehyde, formic acid and so on, is exhausted from a direct methanol fuel cell (DMFC). The production rates of such intermediates are affected by the methanol and water concentrations at the anode, and also the distribution of these products is variable. We investigated the production of the intermediates from a passive DMFC containing a porous carbon plate (PCP), which allows the use of methanol at high concentrations up to 100% due to the high resistivity to the methanol transport through the PCP. The production rates of each intermediate and their distribution were measured not only for a DMFC employing various PCPs with different transportation resistivities, but also for a DMFC without PCP. The results were analyzed in terms of the rate of methanol crossover (MCO) and water flux through the membrane. The detected intermediates were formaldehyde, formic acid, and methylformate, in accordance with previous reports. The production rates of the intermediates were strongly dependent on the flux of the MCO rather than the apparent methanol concentration. When the DMFC was operated under the rate limiting conditions of the methanol transport by the PCP, the production rates of the intermediates were low. However, when it was operated outside of the rate limiting conditions, the production rate increased with the increasing rate of methanol crossover.     

Self-regulating passive fuel supply for small direct methanol fuel cells operating in all orientations

A microfluidic fuel supply concept for passive and portable direct methanol fuel cells (DMFCs) that operates in all spatial orientations is presented. The concept has been proven by fabricating and testing a passive DMFC prototype. Methanol transport at the anode is propelled by the surface energy of deformed carbon dioxide bubbles, generated as a reaction product during DMFC operation. The experimental study reveals that in any orientation, the proposed pumping mechanism transports at least 3.5 times more methanol to the reactive area of the DMFC than the stoichiometry of the methanol oxidation would require to sustain DMFC operation. Additionally, the flow rates closely follow the applied electric load; hence the pumping mechanism is self-regulating. Oxygen is supplied to the cathode by diffusion and the reaction product water is transported out of the fuel cell along a continuous capillary pressure gradient. Results are presented that demonstrate the continuous passive operation for more than 40 h at ambient temperature with a power output of p = 4 mW cm⁻² in the preferred vertical orientation and of p = 3.2 mW cm⁻² in the least favorable horizontal orientation with the anode facing downwards.     

Passive direct methanol fuel cells for portable electronic devices

Due to the increasing demand for electricity, clean, renewable energy resources must be developed. Thus, the objective of the present study was to develop a passive direct methanol fuel cell (DMFC) for portable electronic devices. The power output of six dual DMFCs connected in series with an active area of 4 cm² was approximately 600 mW, and the power density of the DMFCs was 25 mW cm⁻². The DMFCs were evaluated as a power source for mobile phone chargers and media players. The results indicated that the open circuit voltage of the DMFC was between 6.0 V and 6.5 V, and the voltage under operating conditions was 4.0 V. The fuel cell was tested on a variety of cell phone chargers, media players and PDAs. The cost of energy consumption by the proposed DMFC was estimated to be USD 20 W⁻¹, and the cost of methanol is USD 4 kW h. Alternatively, the local conventional electricity tariff is USD 2 kW h. However, for the large-scale production of electronic devices, the cost of methanol will be significantly lower. Moreover, the electricity tariff is expected to increase due to the constraints of fossil fuel resources and pollution. As a result, DMFCs will become competitive with conventional power sources.     

The function of hydrophobic cathodic backing layers for high energy passive direct methanol fuel cell

Homemade wet-proofing carbon papers with back-flow effect were applied as backing layers in the cathode of passive air-breathing direct methanol fuel cell (DMFC) fed by pure methanol. With the increase of polytetrafluoroethylene (PTFE) content, the carbon papers exhibited different water transport resistance and generated different back-flow effects. Moreover, PTFE-treated carbon papers were observed by scanning electronic microscope (SEM) to investigate the function of the cross-linked microstructure. Maximum energy density (438 Wh L⁻¹) of the improved pure methanol DMFC was obtained by using carbon paper with 40 wt.% PTFE content as the cathodic backing layer. This value was 6 times larger than that of the conventional DMFC fed by 2 M methanol solution.     

Double microporous layer cathode for membrane electrode assembly of passive direct methanol fuel cells

A novel membrane electrode assembly (MEA) is described that utilizes a double microporous layer (MPL) structure in the cathode of a passive direct methanol fuel cell (DMFC). The double MPL cathode uses Ketjen Black carbon as an inner-MPL and Vulcan XC-72R carbon as an outer-MPL. Experimental results indicate that this double MPL structure at the cathode provides not only a higher oxygen transfer rate, but enables more effective back diffusion of water; thus, leading to an improved power density and stability of the passive DMFC. The maximum power density of an MEA with a double MPL cathode was observed to be ca. 33.0 mW cm⁻², which is found to be a substantial improvement over that for a passive DMFC with a conventional MEA. A. C. impedance analysis suggests that the increased performance of a DMFC with the double MPL cathode might be attributable to a decreased charge transfer resistance for the cathode oxygen reduction reaction.     

Supported PtRu on mesoporous carbons for direct methanol fuel cells

We prepared and characterized several cryogel mesoporous carbons of different pore size distribution and report the catalytic activity of PtRu supported on mesoporous carbons of pore size >15 nm in passive and in active direct methanol fuel cells (DMFCs). At room temperature (RT), the specific maximum power of the passive DMFCs with mesoporous carbon/PtRu systems as anode was in the range 3–5 W g⁻¹. Passive DMFC assembly and RT tests limit the performance of the electrocatalytic systems and the anodes were thus tested in active DMFCs at 30, 60 and 80 °C. Their responses were also compared to those of commercial Vulcan carbon/PtRu. At 80 °C, the specific maximum power of the active DMFC with C656/PtRu was 37 W g⁻¹ and the required amount of Pt per kW estimated at 0.4 V cell voltage was 31 g kW⁻¹, a value less than half that of Vulcan carbon/PtRu.     

New anodic diffusive layer for passive micro-direct methanol fuel cell

The addition of carbon nanotubes (CNTs) into anodic micro-porous layer (MPL) of the membrane electrode assembly significantly improves the performance of the passive micro-direct methanol fuel cells (DMFCs). The maximum power density of ca. 32.2 mW cm⁻² at a temperature of ca. 25 °C and under air-breathing mode is achieved with pure CNTs as anode MPL material. Impedance analysis and cyclic voltammetric measurements of the anodes indicate that the increased performance of the passive DMFC with the addition of CNTs into anodic MPLs could be attributed to the decrease in charge transfer resistance of the anode reaction and to the improvement in catalyst utilization. Scanning electron microscopy measurements show the network formation within the MPL due to the one-dimensional structure of CNTs, which could be beneficial to the methanol mass transfer and to the improvement in catalyst utilization. Furthermore, the durability test of a passive DMFC after 300 h operation demonstrates that the passive DMFC with CNTs as anode MPL materials exhibits very good stability.     

Performance evaluation of passive direct methanol fuel cell with methanol vapour supplied through a flow channel

This work examines the effect of fuel delivery configuration on the performance of a passive air-breathing direct methanol fuel cell (DMFC). The performance of a single cell is evaluated while the methanol vapour is supplied through a flow channel from a methanol reservoir connected to the anode. The oxygen is supplied from the ambient air to the cathode via natural convection. The fuel cell employs parallel channel configurations or open chamber configurations for methanol vapour feeding. The opening ratio of the flow channel and the flow channel configuration is changed. The opening ratio is defined as that between the area of the inlet port and the area of the outlet port. The chamber configuration is preferred for optimum fuel feeding. The best performance of the fuel cell is obtained when the opening ratio is 0.8 in the chamber configuration. Under these conditions, the peak power is 10.2 mW cm⁻² at room temperature and ambient pressure. Consequently, passive DMFCs using methanol vapour require sufficient methanol vapour feeding through the flow channel at the anode for best performance. The mediocre performance of a passive DMFC with a channel configuration is attributed to the low differential pressure and insufficient supply of methanol vapour.     

A self-regulated passive fuel-feed system for passive direct methanol fuel cells

Operating a passive direct methanol fuel cell (DMFC) with high methanol concentration is desired because this increases the energy density of the fuel cell system and hence results in a longer runtime. However, the increase in methanol concentration is limited by the adverse effect of methanol crossover in the conventional design. To overcome this problem, we propose a new self-regulated passive fuel-feed system that not only enables the passive DMFC to operate with high-concentration methanol solution without serious methanol crossover, but also allows a self-regulation of the feed rate of methanol solution in response to discharging current. The experimental results showed that with this fuel-feed system, the fuel cell fed with high methanol concentration of 12.0 M yielded the same performance as that of the conventional DMFC running with 4.0 M methanol solution. Moreover, as a result of the increased energy density, the runtime of the cell with this new system was as long as 10.1 h, doubling that of the conventional design (4.4 h) at a given fuel tank volume. It was also demonstrated that this passive fuel-feed system could successfully self-regulate the fuel-feed rate in response to the change in discharging currents.     

Methanol permeability and performance of Nafion-zirconium phosphate composite membranes in active and passive direct methanol fuel cells

Methanol crossover through polymer electrolyte membranes represents one of the major problems to be solved in order to improve direct methanol fuel cell (DMFC) performance. With this aim, Nafion/zirconium phosphate (ZrP) composite membranes, with ZrP loading in the range 1-6 wt%, were prepared by casting from mixtures of gels of exfoliated ZrP and Nafion 1100 dispersions in dimethylformamide. These membranes were characterised by methanol permeability, swelling and proton conductivity measurements, as well as by tests in active and passive DMFCs in the temperature range 30-80 °C. Increase in filler loading results in a decrease in both methanol permeability and proton conductivity. As a consequence of the reduced conductivity the power density of active DMFCs decreases with increasing ZrP loading (from 46 to 32 mW cm⁻² at 80 °C). However, due to the lower methanol permeability, the room temperature Faraday efficiency of passive DMFCs, with 20 mA cm⁻² discharge current, nearly doubles when Nafion 1100 is replaced by the composite membrane containing 4 wt% ZrP.     

Effect of the cathode open ratios on the water management of a passive vapor-feed direct methanol fuel cell fed with neat methanol

A novel approach has been proposed to improve the water management of a passive direct methanol fuel cell (DMFC) fed with neat methanol without increasing its volume or weight. By adopting perforated covers with different open ratios at the cathode, the water management has been significantly improved in a DMFC fed with neat methanol. An optimized cathode open ratio could ensure both the sufficient supply of oxygen and low water loss. While changing the open ratio of anode vaporizer can adjust the methanol crossover rate in a DMFC. Furthermore, the gas mixing layer, added between the anode vaporizer and the anode current collector to increase the mass transfer resistance, can improve the cell performance, decrease the methanol crossover, and increase the fuel efficiency. For the case of a DMFC fed with neat methanol, an anode vaporizer with the open ratio of 12% and a cathode open ratio of 20% produced the highest peak power density, 22.7 mW cm⁻², and high fuel efficiency, 70.1%, at room temperature of 25 ± 1 °C and ambient humidity of 25-50%.     

The effect of Nafion content in a graphitized carbon nanofiber-based anode for the direct methanol fuel cell

The performance and stability of a direct methanol fuel cell (DMFC) with membrane electrode assemblies (MEA) using different Nafion^® contents (30, 50 and 70 wt% or MEA30, MEA50 and MEA70, respectively) and graphitized carbon nanofiber (GNF) supported PtRu catalyst at the anode was investigated by a constant current measurement of 9 days (230 h) in a DMFC and characterization with various techniques before and after this measurement. Of the pristine MEAs, MEA50 reached the highest power and current densities. During the 9-day measurement at a constant current, the performance of MEA30 decreased the most (−124 μV h⁻¹), while the MEA50 was almost stable (−11 μV h⁻¹) and performance of MEA70 improved (+115 μV h⁻¹). After the measurement, the MEA50 remained the best MEA in terms of performance. The optimum anode Nafion content for commercial Vulcan carbon black supported PtRu catalysts is between 20 and 40 wt%, so the GNF-supported catalyst requires more Nafion to reach its peak power. This difference is explained by the tubular geometry of the catalyst support, which requires more Nafion to form a penetrating proton conductive network than the spherical Vulcan. Mass transfer limitations are mitigated by the porous 3D structure of the GNF catalyst layer and possible changes in the compact Nafion filled catalyst layers during constant current production.     

Development of a passive direct methanol fuel cell (DMFC) twin-stack for long-term operation

Direct methanol fuel cell (DMFC), with benefits such as high energy efficiency, quick start capability and instantaneous refueling, is a promising power source to meet the ever-increasing power demand for portable electronic products. In this paper, a novel CO₂-driven fuel-feed device was produced and equipped in a passive 8-cell DMFC twin-stack for long-term operation. It was shown that this fuel-feed device was capable of supplying methanol solution continuously in response to the change in discharging current of the stack. Stainless steel sheet was photochemically etched as current collectors based on MEMS techniques. Series interconnections between two neighbor cells were realized in banded configuration which avoided the external connection. TiN-plated mesh was placed between current collector and membrane electrode assembly (MEA), which was used to lessen the internal resistance of the stack. A peak power density of 16.9 mW cm⁻² was achieved with 4 M methanol at ambient temperature and passive operation. The stack equipped with the fuel feed device successfully powered a sensor node for 39 h with the consumption of 80 ml of 4 M methanol.     

Vapor feed direct methanol fuel cells with passive thermal-fluids management system

The present paper describes a novel technology that can be used to manage methanol and water in miniature direct methanol fuel cells (DMFCs) without the need for a complex micro-fluidics subsystem. At the core of this new technology is a unique passive fuel delivery system that allows for fuel delivery at an adjustable rate from a reservoir to the anode. Furthermore, the fuel cell is designed for both passive water management and effective carbon dioxide removal. The innovative thermal management mechanism is the key for effective operation of the fuel cell system. The vapor feed DMFC reached a power density of 16.5 mW cm⁻² at current density of 60 mA cm⁻². A series of fuel cell prototypes in the 0.5 W range have been successfully developed. The prototypes have demonstrated long-term stable operation, easy fuel delivery control and are scalable to larger power systems. A two-cell stack has successfully operated for 6 months with negligible degradation.     

Performance improvement in direct methanol fuel cells using a highly porous corrosion-resisting stainless steel flow field

Power generation with direct methanol fuel cell (DMFC) systems requires only simple equipment, and has the important advantage of using a liquid fuel with higher energy density and easier handling characteristics than hydrogen. However, the power output of DMFC is lower than hydrogen fuel cells. To improve the power output of DMFC it is very important to reduce diffusion polarization at higher current density conditions. This research used a corrosion-resisting type porous stainless steel developed based on the technology for metal–hydride battery electrodes in the separator flow fields for reactants and products in a single cell DMFC and analyzed its influence on performance characteristics.