Electrochemical performance of La1.6Sr0.4NiO4-Ag composite cathodes for intermediate-temperature solid oxide fuel cells

La_1.6Sr_0.4NiO₄-Ag (LSN-Ag) composite cathodes are prepared and characterized by XRD and SEM, respectively. The electrochemical properties of the composite cathodes are investigated using AC impedance and DC polarization methods from 500 to 700 °C under different oxygen partial pressures. The polarization resistance (R_p) decreases with the increase of Ag content in the composite electrode. The addition of 5 vol.% Ag in LSN results in the lowest R_p of 0.21 Ω cm² at 700 °C in air. Oxygen partial pressure dependence study indicates that the charge transfer process is the reaction rate limiting step, while the diffusion process has no sensitive to the Ag loading. LSN-5Ag cathode exhibits the lowest overpotential of about 32 mV at a current density of 144 mA cm⁻² at 700 °C in air.     

Development of Ag-(BaO)0.11(Bi2O3)0.89 composite cathodes for intermediate temperature solid oxide fuel cells

The electrochemical performances of Ag-(BaO)_0.11(Bi₂O₃)_0.89 (BSB) composite cathodes on Ce_0.8Sm_0.2O_1.9 electrolytes have been investigated for intermediate temperature solid oxide fuel cells (ITSOFCs) using ac impedance spectroscopy from 500 to 700 °C. Results indicate that the electrochemical properties of these composites are quite sensitive to the composition and the microstructure of the cathode. The optimum BSB addition (50% by volume) to Ag resulted in about 20 times lower area specific resistance (ASR) at 650 °C. The ASR values for the Ag50-BSB and Ag cathodes were 0.32 and 6.5 Ω cm² at 650 °C, respectively. The high performances of Ag-BSB cathodes are determined by the high catalytic activity for oxygen dissociation and ionic conductivity of BSB, and by the excellent catalytic activity for oxygen reduction of silver. The maximum power density of the Ag50-BSB cathode was 224 mWcm⁻² at 650 °C, which classify this composite as a promising material for ITSOFC.     

Electrochemical performance of (Ba0.5Sr0.5)0.9Sm0.1Co0.8Fe0.2O3−δ as an intermediate temperature solid oxide fuel cell cathode

This study presents the electrochemical performance of (Ba_0.5Sr_0.5)_0.9Sm_0.1Co_0.8Fe_0.2O_3−δ (BSSCF) as a cathode material for intermediate temperature solid oxide fuel cells (IT-SOFC). AC-impedance analyses were carried on an electrolyte supported BSSCF/Sm_0.2Ce_0.8O_1.9 (SDC)/Ag half-cell and a Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCF)/SDC/Ag half-cell. In contrast to the BSCF cathode half-cell, the total resistance of the BSSCF cathode half-cell was lower, e.g., at 550 °C; the values for the BSSCF and BSCF were 1.54 and 2.33 Ω cm², respectively. The cell performance measurements were conducted on a Ni-SDC anode supported single cell using a SDC thin film as electrolyte, and BSSCF layer as cathode. The maximum power densities were 681 mW cm⁻² at 600 °C and 820 mW cm⁻² at 650 °C.     

Infiltrated multiscale porous cathode for proton-conducting solid oxide fuel cells

A Sm_0.5Sr_0.5CoO_3−δ (SSC)-BaZr_0.1Ce_0.7Y_0.2O_3−δ (BZCY) composite cathode with multiscale porous structure was successfully fabricated through infiltration for proton-conducting solid oxide fuel cells (SOFCs). The multiscale porous SSC catalyst was coated on the BZCY cathode backbones. Single cells with such composite cathode demonstrated peak power densities of 0.289, 0.383, and 0.491 W cm⁻² at 600, 650, 700 °C, respectively. Cell polarization resistances were found to be as low as 0.388, 0.162, and 0.064 Ω cm² at 600, 650 and 700 °C, respectively. Compared with the infiltrated multiscale porous cathode, cells with screen-printed SSC-BZCY composite cathode showed much higher polarization resistance of 0.912 Ω cm² at 600 °C. This work has demonstrated a promising approach in fabricating high performance proton-conducting SOFCs.     

Performances of LnBaCo2O5+x-Ce0.8Sm0.2O1.9 composite cathodes for intermediate-temperature solid oxide fuel cells

Double-perovskite oxides, LnBaCo₂O_5+x (LnBCO) (Ln = Pr, Nd, Sm, and Gd), are prepared using a solid-state reaction as cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The performances of LnBCO-Ce_0.8Sm_0.2O_1.9 (SDC) composite cathodes were investigated for IT-SOFCs on La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−δ (LSGM) electrolyte. The thermal expansion coefficient can be effectively reduced in the case of the composite cathodes. No chemical reactions between LnBCO cathodes and SDC electrolyte, and LnBCO and LSGM are found. The electrochemical performances of LnBCO cathodes and LnBCO-SDC composite cathodes decrease with decreasing Ln³⁺ ionic radii, which is closely related to the decrease of the electrical conductivity and fast oxygen diffusion property. The area specific resistances of the LnBCO cathodes and LnBCO-SDC composite cathodes on LSGM electrolyte are all lower than 0.13 Ω cm² and 0.15 Ω cm² at 700 °C, respectively. The maximum power densities of single-cell consisted of LnBCO-SDC composite cathodes, LSGM electrolyte, and Ni-SDC anode achieve 758-608 mW cm⁻² at 800 °C with the change from Ln = Pr to Gd, respectively. These results indicate that LnBCO-SDC composite oxides are candidates as a promising cathode material for IT-SOFCs.     

Bi0.5Sr0.5MnO3 as cathode material for intermediate-temperature solid oxide fuel cells

Bi_0.5Sr_0.5MnO₃ (BSM), a manganite-based perovskite, has been investigated as a new cathode material for intermediate-temperature solid oxide fuel cells (SOFCs). The average thermal-expansion coefficient of BSM is 14 × 10⁻⁶ K⁻¹, close to that of the typical electrolyte material. Its electrical conductivity is 82-200 S cm⁻¹ over the temperature range of 600-800 °C, and the oxygen ionic conductivity is about 2.0 × 10⁻⁴ S cm⁻¹ at 800 °C. Although the cathodic polarization behavior of BSM is similar to that of lanthanum strontium manganite (LSM), the interfacial polarization resistance of BSM is substantially lower than that of LSM. The cathode polarization resistance of BSM is only 0.4 Ω cm² at 700 °C and it decreases to 0.17 Ω cm² when SDC is added to form a BSM-SDC composite cathode. Peak power densities of single cells using a pure BSM cathode and a BSM-SDC composite electrode are 277 and 349 mW cm² at 600 °C, respectively, which are much higher than those obtained with LSM-based cathode. The high electrochemical performance indicates that BSM can be a promising cathode material for intermediate-temperature SOFCs.     

Low-temperature solid oxide fuel cells with La1−xSrxMnO3 as the cathodes

La_1−xSr_xMnO₃ (LSM) has been widely developed as the cathode material for high-temperature solid oxide fuel cells (SOFCs) due to its chemical and mechanical compatibilities with the electrolyte materials. However, its application to low-temperature SOFCs is limited since its electrochemical activity decreases substantially when the temperature is reduced. In this work, low-temperature SOFCs based on LSM cathodes are developed by coating nanoscale samaria-doped ceria (SDC) onto the porous electrodes to significantly increase the electrode activity of both cathodes and anodes. A peak power density of 0.46 W cm⁻² and area specific interfacial polarization resistance of 0.36 Ω cm² are achieved at 600 °C for single cells consisting of Ni-SDC anodes, LSM cathodes, and SDC electrolytes. The cell performances are comparable with those obtained with cobalt-based cathodes such as Sm_0.5Sr_0.5CoO₃, and therefore encouraging in the development of low-temperature SOFCs with high reliability and durability.     

Ba0.5Sr0.5Co0.8Fe0.2O3 − δ + LaCoO3 composite cathode for Sm0.2Ce0.8O1.9-electrolyte based intermediate-temperature solid-oxide fuel cells

A novel Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3 − δ + LaCoO₃ (BSCF + LC) composite oxide was investigated for the potential application as a cathode for intermediate-temperature solid-oxide fuel cells based on a Sm_0.2Ce_0.8O_1.9 (SDC) electrolyte. The LC oxide was added to BSCF cathode in order to improve its electrical conductivity. X-ray diffraction examination demonstrated that the solid-state reaction between LC and BSCF phases occurred at temperatures above 950 °C and formed the final product with the composition: La_0.316Ba_0.342Sr_0.342Co_0.863Fe_0.137O_3 − δ at 1100 °C. The inter-diffusion between BSCF and LC was identified by the environmental scanning electron microscopy and energy dispersive X-ray examination. The electrical conductivity of the BSCF + LC composite oxide increased with increasing calcination temperature, and reached a maximum value of ∼300 S cm⁻¹ at a calcination temperature of 1050 °C, while the electrical conductivity of the pure BSCF was only ∼40 S cm⁻¹. The improved conductivity resulted in attractive cathode performance. An area-specific resistance as low as 0.21 Ω cm² was achieved at 600 °C for the BSCF (70 vol.%) + LC (30 vol.%) composite cathode calcined at 950 °C for 5 h. Peak power densities as high as ∼700 mW cm⁻² at 650 °C and ∼525 mW cm⁻² at 600 °C were reached for the thin-film fuel cells with the optimized cathode composition and calcination temperatures.     

SmBaCo2O5+x double-perovskite structure cathode material for intermediate-temperature solid-oxide fuel cells

SmBaCo₂O_5+x (SBCO), an oxide with double-perovskite structure, has been developed as a novel cathode material for intermediate-temperature solid-oxide fuel cells (IT-SOFCs). The electrical conductivity of an SBCO sample reaches 815–434 S cm⁻¹ in the temperature range 500–800 °C. XRD results show that an SBCO cathode is chemically compatible with the intermediate-temperature electrolyte materials Sm_0.2Ce_0.8O_1.9 (SDC) and La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−δ (LSGM). The polarization resistances of an SBCO cathode on SDC and LSGM electrolytes are 0.098 and 0.054 Ω cm² at 750 °C, respectively. The maximum power densities of a single cell with an SBCO cathode on SDC and LSGM electrolytes reach 641 and 777 mW cm⁻² at 800 °C, respectively. The results of this study demonstrate that the double-perovskite structure oxide SBCO is a very promising cathode material for use in IT-SOFCs.     

Optimization of La0.6Ca0.4Fe0.8Ni0.2O3-Ce0.8Sm0.2O2 composite cathodes for intermediate-temperature solid oxide fuel cells

Sample of nominal composition La_0.6Ca_0.4Fe_0.8Ni_0.2O₃ (LCFN) was prepared by liquid mix method. The structure of the polycrystalline powder was analyzed with X-ray powder diffraction data. This compound shows orthorhombic perovskite structure with a space group Pnma. In order to improve the electrochemical performance, Sm-doped ceria (SDC) powder was added to prepare the LCFN-SDC composite cathodes. Electrochemical characteristics of the composites have been investigated for possible application as cathode material for an intermediate-temperature-operating solid oxide fuel cell (IT-SOFC). The polarization resistance was studied using Sm-doped ceria (SDC). Electrochemical impedance spectroscopy measurements of LCFN-SDC/SDC/LCFN-SDC test cell were carried out. These electrochemical experiments were performed at equilibrium from 850 °C to room temperature, under both zero dc current intensity and air. The best value of area-specific resistance (ASR) was for LCFN cathode doped with 10% of SDC (LCFN-SDC9010), 0.13 Ω cm² at 850 °C. The dc four-probe measurement exhibits a total electrical conductivity over 100 S cm⁻¹ at T ≥ 600 °C for LCFN-SDC9010 composite cathode.     

La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells

Porous La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ (LSCF) cathodes are coated with a thin film of Sm_0.2Ce_0.8O_1.95−δ (SDC) using a one-step infiltration process. Examination of the microstructures reveals that small SDC particles are formed on the surface of LSCF grains with a relatively narrow size distribution. Impedance analysis indicates that the SDC infiltration has dramatically reduced the polarization of LSCF cathode, reaching interfacial resistances of 0.074 and 0.44 Ω cm² at 750 °C and 650 °C, respectively, which are about half of those for LSCF cathode without infiltration of SDC. The activation energies of the SDC infiltrated LSCF cathodes are in the range of 1.42-1.55 eV, slightly lower than those for a blank LSCF cathode. The SDC infiltrated LSCF cathodes have also shown improved stability under typical SOFC operating conditions, suggesting that SDC infiltration improves not only power output but also performance stability and operational life.     

New insights in the polarization resistance of anode-supported solid oxide fuel cells with La0.6Sr0.4Co0.2Fe0.8O3 cathodes

In this study, the polarization resistance of anode-supported solid oxide fuel cells (SOFC) with La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF) cathodes was investigated by I-V sweep and electrochemical impedance spectroscopy under a series of operating voltages and cathode environments (i.e. stagnant air, flowing air, and flowing oxygen) at temperatures from 550 °C to 750 °C. In flowing oxygen, the polarization resistance of the fuel cell decreased considerably with the applied current density. A linear relationship was observed between the ohmic-free over-potential and the logarithm of the current density of the fuel cell at all the measuring temperatures. In stagnant or flowing air, an arc related to the molecular oxygen diffusion through the majority species (molecular nitrogen) present in the pores of the cathode was identified at high temperatures and high current densities. The magnitude of this arc increased linearly with the applied current density due to the decreased oxygen partial pressure at the interface of the cathode and the electrolyte. It is found that the performance of the fuel cell in air is mainly determined by the oxygen diffusion process. Elimination of this process by flowing pure oxygen to the cathode improved the cell performance significantly. At 750 °C, for a fuel cell with a laser-deposited Sm_0.2Ce_0.8O_1.9 (SDC) interlayer, an extraordinarily high power density of 2.6 W cm⁻² at 0.7 V was achieved in flowing oxygen, as a result of reduced ohmic and polarization resistance of the fuel cell, which were 0.06 Ω cm² and 0.03 Ω cm², respectively. The results indicate that microstructural optimization of the LSCF cathode or adoption of a new cell design which can mitigate the oxygen diffusion limitation in the cathode might enhance cell performance significantly.     

Enhanced electrochemical performance of solution impregnated La0.8Sr0.2Co0.8Ni0.2O3−δ cathode for intermediate temperature solid oxide fuel cells

Solution impregnated La_0.8Sr_0.2Co_0.8Ni_0.2O₃ + Gd-doped CeO₂ (LSCN + GDC) cathodes for intermediate temperature solid oxide fuel cells (IT-SOFC) are prepared and their electrochemical properties are evaluated and compared with the conventional LSCN cathodes. The results indicate that the cathode performance can be enhanced by the presence of the nanosized microstructure produced with the solution impregnation method. It is determined that the amount of LSCN loading in the LSCN + GDC composite cathode needs to be higher than 35 wt% in order to achieve a performance superior to that of the conventional LSCN cathode. The optimum amount of LSCN loading is in the range of 45-55 wt% with an activation energy near 1.32 eV for oxygen reduction. At temperatures between 600 and 750 °C, the polarization resistance of the 55 wt% LSCN loaded LSCN + GDC cathode is in the range of 1.07 and 0.08 Ω cm², which is only about one half of that for the conventional cathode.     

A cobalt-free Sm0.5Sr0.5Fe0.8Cu0.2O3−δ-Ce0.8Sm0.2O2−δ composite cathode for proton-conducting solid oxide fuel cells

A cobalt-free composite Sm_0.5Sr_0.5Fe_0.8Cu_0.2O_3−δ-Ce_0.8Sm_0.2O_2−δ (SSFCu-SDC) is investigated as a cathode for proton-conducting solid oxide fuel cells (H-SOFCs) in intermediate temperature range, with BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3−δ (BZCYYb) as the electrolyte. The XRD results show that SSFCu is chemically compatible with SDC at temperatures up to 1100 °C. The quad-layer single cells of NiO-BZCYYb/NiO-BZCYYb/BZCYYb/SSFCu-SDC are operated from 500 to 700 °C with humidified hydrogen (∼3% H₂O) as fuel and the static air as oxidant. It shows an excellent power density of 505 mW cm⁻² at 700 °C. Moreover, a low electrode polarization resistance of 0.138 Ω cm² is achieved at 700 °C. Preliminary results demonstrate that the cobalt-free SSFCu-SDC composite is a promising cathode material for H-SOFCs.     

Preparation and performance of nanostructured porous thin cathode for low-temperature solid oxide fuel cells by spin-coating method

To reduce the cathode–electrolyte interfacial polarization resistance of low-temperature solid oxide fuel cells (SOFCs), a nanostructured porous thin cathode consisting of Sm_0.5Sr_0.5CoO₃ (SSC) and Ce_0.8Sm_0.2O_1.9 (SDC) was fabricated on an anode-supported electrolyte film using spin-coating technique. A suspension with nanosized cathode materials, volatilizable solvents and a soluble pore former was developed. The results indicated that the cell with the nanostructured porous thin cathode sintered at 950 °C showed relatively high maximum power density of 212 mW cm⁻² at 500 °C and 114 mW cm⁻² at 450 °C, and low interfacial polarization resistance of 0.79 Ω cm² at 500 °C and 2.81 Ω cm² at 450 °C. Hence, the nanostructured porous thin cathode is expected to be a promising cathode for low-temperature SOFCs.     

Cobalt-free layered perovskite GdBaFe2O5+x as a novel cathode for intermediate temperature solid oxide fuel cells

A cobalt-free layered perovskite oxide, GdBaFe₂O_5+x (GBF), was investigated as a novel cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). Area-specific resistance (ASR) of GBF was measured by impedance spectroscopy in a symmetrical cell. The observed ASR was as low as 0.15 Ω cm² at 700 °C and 0.39 Ω cm² at 650 °C, respectively. A laboratory sized Sm_0.2Ce_0.8O_1.9 (SDC)-based tri-layer cell of NiO-SDC/SDC/GBF was tested under intermediate temperature conditions of 550-700 °C with humidified H₂ (∼3% H₂O) as a fuel and the static ambient air as an oxidant. A maximal power density of 861 mW cm⁻² was achieved at 700 °C. The electrode polarization resistance was as low as 0.57, 0.22, 0.13 and 0.08 Ω cm² at 550, 600, 650 and 700 °C, respectively. The experimental results indicate that the layered perovskite GBF is a promising cathode candidate for IT-SOFCs.     

Investigation of Sm0.5Sr0.5CoO3−δ/Co3O4 composite cathode for intermediate-temperature solid oxide fuel cells

The electrochemical properties of an Sm_0.5Sr_0.5CoO_3−δ/Co₃O₄ (SSC/Co₃O₄) composite cathode were investigated as a function of the cathode-firing temperature, SSC/Co₃O₄ composition, oxygen partial pressure and CO₂ treatment. The results showed that the composite cathodes had an optimal microstructure at a firing temperature of about 1100 °C, while the optimum Co₃O₄ content in the composite cathode was about 40 wt.%. A single cell with this optimized C₄₀-1100 cathode exhibited a very low polarization resistance of 0.058 Ω cm², and yielded a maximum power density of 1092 mW cm⁻² with humidified hydrogen fuel and air oxidant at 600 °C. The maximum power density reached 1452 mW cm⁻² when pure oxygen was used as the oxidant for a cell with a C₃₀-1100 cathode operating at 600 °C due to the enhanced open-circuit voltage and accelerated oxygen surface-exchange rate. X-ray diffraction and thermogravimetric analyses, as well as the electrochemical properties of a CO₂-treated cathode, also implied promising applications of such highly efficient SSC/Co₃O₄ composite cathodes in single-chamber fuel cells with direct hydrocarbon fuels operating at temperatures below 500 °C.     

Performance and durability of nanostructured (La0.85Sr0.15)0.98MnO3/yttria-stabilized zirconia cathodes for intermediate-temperature solid oxide fuel cells

In this communication we report the fabrication of nanostructured (La_0.85Sr_0.15)_0.98MnO₃ (LSM)/yttria-stabilized zirconia (YSZ) composite cathodes consisting of homogeneously distributed and connected LSM and YSZ grains approximately 100 nm large. We also investigate for the first time the role of the cathode nanostructure on the performance and the durability of intermediate-temperature solid oxide fuel cells. The cathodes were fabricated using homogenous LSM/YSZ nanocomposite particles synthesized by co-precipitation, using YSZ nanoparticles of 3 nm as seed crystals. Detailed microstructural characterization by transmission electron microscopy with energy-dispersive X-ray spectroscopy revealed that many of the LSM/YSZ junctions in the cathode faced the homogeneously connected pore channels, indicating the formation of a considerable number of triple phase boundaries. The nanostructure served to reduce cathodic polarization. As a result, these anode-supported solid oxide fuel cells showed high power densities of 0.18, 0.40, 0.70 and 0.86 W cm⁻² at 650, 700, 750 and 800 °C, respectively, under the cell voltage of 0.7 V. Furthermore, no significant performance degradation of the cathode was observed during operation at 700 °C for 1000 h under a constant current density of 0.2 A cm⁻².     

Double-perovskites YBaCo2−xFexO5+δ cathodes for intermediate-temperature solid oxide fuel cells

Double-perovskites YBaCo_2−xFe_xO_5+δ (YBCF, x = 0.0, 0.2, 0.4 and 0.6) are synthesized with a solid-state reaction and are assessed as potential cathode materials for utilization in intermediate-temperature solid oxide fuel cells (IT-SOFCs) on the La_0.9Sr_0.1Ga_0.8Mg_0.115Co_0.085O_2.85 (LSGMC) electrolyte. The YBCF materials exhibit chemical compatibility with the LSGMC electrolyte up to a temperature of 950 °C. The conductivity of the YBCF samples decreases with increasing Fe content, and the maximum conductivity of YBCF is 315 S cm⁻¹ at 325 °C for the x = 0.0 sample. A semiconductor-metal transition is observed at about 300-400 °C. The thermal expansion coefficient of the YBCF samples increases from 16.3 to 18.0 × 10⁻⁶ K⁻¹ in air at temperatures between 30 and 900 °C with increase in Fe content. The area-specific resistances of YBCF cathodes at x = 0.0, 0.2 and 0.4 on the LSGMC electrolyte are 0.11, 0.13 and 0.15 Ω cm² at a temperature of 700 °C, respectively. The maximum power densities of the single cells fabricated with the LSGMC electrolyte, Ce_0.8Sm_0.2O_1.9 (SDC) interlayer, NiO/SDC anode and YBCF cathodes at x = 0.0, 0.2 and 0.4 reach 873, 768 and 706 mW cm⁻², respectively. This study suggests that the double-perovskites YBCF (0 ≤ x ≤ 0.4) can be potential candidates for utilization as IT-SOFC cathodes.     

Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte

La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF) powder was prepared by glycine–nitrate combustion method. The electrochemical properties of porous LSCF cathodes and LSCF–Gd_0.1Ce_0.9O_1.95 (GDC) composite cathodes were evaluated at intermediate/low temperatures of 500–700 °C. The polarization resistance of pure LSCF cathode sintered at 975 °C for 2 h was 1.20 Ω cm² at 600 °C. The good performance of pure LSCF cathode is attributed to its unique microstructure—small grain size, high porosity and large surface area. The addition of GDC to LSCF cathode further reduced the polarization resistance. The lowest polarization resistance of 0.17 Ω cm² was achieved at 600 °C for LSCF–GDC (40:60 wt%) composite cathode. An anode-supported solid oxide fuel cell (SOFC) was prepared using LSCF–GDC (40:60 wt%) composite as cathode, GDC film (49-μm-thick) as electrolyte, and Ni–GDC (65:35 wt%) as anode. The total electrode polarization resistance was 0.27 Ω cm² at 600 °C, which implies that LSCF–GDC (40:60 wt%) composite cathode used in the anode-supported SOFC had a polarization resistance lower than 0.27 Ω cm² at 600 °C. The cell generated good performance with the maximum power density of 562, 422, 257 and 139 mW/cm² at 650, 600, 550 and 500 °C, respectively.