Recognition of DNA by single-chain derivatives of the phage 434 repressor: high affinity binding depends on both the contacted and non-contacted base pairs

Single-chain derivatives of the phage 434 repressor, termed single-chain repressors, contain covalently dimerized DNA-binding domains (DBD) which are connected with a peptide linker in a head-to-tail arrangement. The prototype RR69 contains two wild-type DBDs, while RR*69 contains a wild-type and an engineered DBD. In this latter domain, the DNA- contacting amino acids of thealpha3 helix of the 434 repressor are replaced by the corresponding residues of the related P22 repressor. We have used binding site selection, targeted mutagenesis and binding affinity studies to define the optimum DNA recognition sequence for these single-chain proteins. It is shown that RR69 recognizes DNA sequences containing the consensus boxes of the 434 operators in a palindromic arrangement, and that RR*69 optimally binds to non-palindromic sequences containing a 434 operator box and a TTAA box of which the latter is present in most P22 operators. The spacing of these boxes, as in the 434 operators, is 6 bp. The DNA-binding of both single-chain repressors, similar to that of the 434 repressor, is influenced indirectly by the sequence of the non-contacted, spacer region. Thus, high affinity binding is dependent on both direct and indirect recognition. Nonetheless, the single-chain framework can accommodate certain substitutions to obtain altered DNA-binding specificity and RR*69 represents an example for the combination of altered direct and unchanged indirect readout mechanisms.     

DNA bending is essential for the site-specific recognition of DNA response elements by the DNA binding domain of the tumor suppressor protein p53

We have used circular permutation assays to determine the extent and location of the DNA bend induced by the DNA binding domain of human wild type p53 (p53DBD) upon binding to several naturally occurring DNA response elements. We have found that p53DBD binding induces axial bending in all of the response elements investigated. In particular, response elements having a d(CATG) sequence at the junction of two consensus pentamers in each half-site favor highly bent complexes (bending angle is approximately 50 degrees ), whereas response elements having d(CTTG) bases at this position are less bent (bending angles from approximately 37 to approximately 25 degrees ). Quantitative electrophoretic mobility shift assays of different complexes show a direct correlation between the DNA bending angle and the binding affinity of the p53DBD with the response elements, i.e. the greater the stability of the complex, the more the DNA is bent by p53DBD binding. The study provides evidence that the energetics of DNA bending, as determined by the presence or absence of flexible sites in the response elements, may contribute significantly to the overall binding affinity of the p53DBD for different sequences. The results therefore suggest that both the structure and the stability of the p53-DNA complex may vary with different response elements. This variability may be correlated with variability in p53 function.     

NMR studies of the Escherichia coli Trp repressor.trpRs operator complex

To understand the specificity of the Escherichia coli Trp repressor for its operators, we have begun to study complexes of the protein with alternative DNA sequences, using 1H-NMR spectroscopy. We report here the 1H-NMR chemical shifts of a 20-bp oligodeoxynucleotide containing the sequence of a symmetrised form of the trpR operator in the presence and absence of the holorepressor. Deuterated protein was used to assign the spectrum of the oligodeoxynucleotide in a 37-kDa complex with the Trp holorepressor. Many of the resonances of the DNA shift on binding to the protein, which suggests changes in conformation throughout the sequence. The largest changes in shifts for the aromatic protons in the major groove are for A15 and G16, which are thought to hydrogen bond to the protein, possibly via water molecules. We have also examined the effect of DNA binding on the corepressor, tryptophan, in this complex. The indole proton resonance of the tryptophan undergoes a downfield shift of 1.2 ppm upon binding of DNA. This large shift is consistent with hydrogen bonding of the tryptophan to the phosphate backbone of the trpR operator DNA, as in the crystal structure of the holoprotein with the trp operator.     

Statistical and structural analysis of trp binding sites: comparison of natural and in vitro selected sequences

Two different modes can be used when the trp repressor binds to trp binding sites. In the "full-site mode" each repressor molecule is bound to a DNA target containing at least two conserved five base pair tracts separated by eight base pairs. The binding of the repressor to natural trp operators is of this kind. In the "half-site mode" two repressor molecules are sequence-specifically bound, with infinite cooperativity, to two abutting DNA pentamers. We present evidence suggesting that the sequences obtained by a recent in vitro selection assay (Czernik et al. J. Biol. Chem. 269, 27869-27875, 1994) were selected by the binding of two repressor molecules, and that the repressor is bound to most of these sequences using the half-site mode. Using the results of the selection assay, and the set of natural trp binding sites, we characterize the different sequence requirements of the "full-site" versus the "half-site" binding modes. A statistical analysis of the information content of these binding sites shows that functional information on protein binding modes can be extracted from a set of DNA binding sites by comparing the information content of two different DNA populations, or sub-populations. Furthermore, it shows that the binding of proteins to sequences selected by a functional in vitro assay do not necessarily mimic the binding of the protein to the natural targets, even if the information content is similar in the two DNA target populations, i.e., even if the stringency of the selection assay is adequate for locating natural-like sequences. In addition, we show that the structural requirements for protein-DNA interactions can be achieved by different conformations at the base-pair level. Differences in the structural characteristics of different base-pair steps can be used to determine the binding mode and differential binding affinity, which can be utilized in the regulation of several binding sites by a single specific protein.     

Expression, purification, and functional characterization of the carboxyl-terminal domain fragment of bacteriophage 434 repressor

The repressor protein of bacteriophage 434 binds to DNA as a dimer of identical subunits. Its strong dimerization is mediated by the carboxyl-terminal domain. Cooperative interactions between the C-terminal domains of two repressor dimers bound at adjacent sites can stabilize protein-DNA complexes formed with low-affinity binding sites. We have constructed a plasmid, pCT1, which directs the overproduction of the carboxyl-terminal domain of 434 repressor. The protein encoded by this plasmid is called CT-1. Cells transformed with pCT1 are unable to be lysogenized by wild-type 434 phage, whereas control cells are lysogenized at an efficiency of 1 to 5%. The CT-1-mediated interference with lysogen formation presumably results from formation of heteromeric complexes between the phage-encoded repressor and the plasmid-encoded carboxyl-terminal domain fragment. These heteromers are unable to bind DNA and thereby inhibit the repressor's activity in promoting lysogen formation. Two lines of evidence support this conclusion. First, DNase I footprinting experiments show that at a 2:1 ratio of CT-1 to intact 434 repressor, purified CT-1 protein prevents the formation of complexes between 434 repressor and its OR1 binding site. Second, cross-linking experiments reveal that only a specific heterodimeric complex forms between CT-1 and intact 434 repressor. This latter observation indicates that CT-1 interferes with 434 repressor-operator complex formation by preventing dimerization and not by altering the conformation of the DNA-bound repressor dimer. Our other evidence is also consistent with this suggestion. We have used deletion analysis in an attempt to define the region which mediates the 434 repressor-CT-1 interaction. CT-1 proteins which have more than the last 14 amino acids removed are unable to interfere with 434 repressor action in vivo.     

Study of a noncovalent trp repressor: DNA operator complex by electrospray ionization time-of-flight mass spectrometry

Electrospray ionization time-of-flight mass spectrometry (ESI-TOF MS) has been used to study noncovalent interactions between the trp apo-repressor (TrpR), its co-repressor tryptophan and its specific operator DNA. In 5 mM ammonium acetate, TrpR was detected as a partially unfolded monomer. In the presence of a 21-base-pair DNA possessing the two symmetrically arranged CTAG consensus sequences required for specific TrpR binding, a homodimer-dsDNA complex with a 1:1 stoichiometry was observed. Co-repressor was not needed for the complex to form under our experimental conditions. Collision induced dissociation (CID-MS) revealed that this complex was very stable in the gas phase since dissociation was achieved only at energies that also broke covalent bonds. We saw no evidence for the presence of the six water molecules that mediate the interaction between the protein and the DNA in the crystal structure. To check the binding specificity of the TrpR for its target DNA, a competitive experiment was undertaken: the protein was mixed with an equimolar amount of three different DNAs in which the two CTAG sequences were separated by 2, 4, and 6 bp, respectively. Only the DNA with the correct consensus spacing of 4 bp was able to form stable interactions with TrpR. This experiment demonstrates the potential of ESI-MS to test the sequence-specificity of protein-DNA complexes. The interactions between the TrpR-DNA complex and 5-methyl-, L- and D-tryptophan were also investigated. Two molecules of 5-methyl- or L-tryptophan were bound with high affinity to the TrpR-DNA complex. On the other hand, D-tryptophan appeared to bind to the complex with poor specificity and poor affinity.     

Crystal structure of an engineered Cro monomer bound nonspecifically to DNA: possible implications for nonspecific binding by the wild-type protein

The structure has been determined at 3.0 A resolution of a complex of engineered monomeric Cro repressor with a seven-base pair DNA fragment. Although the sequence of the DNA corresponds to the consensus half-operator that is recognized by each subunit of the wild-type Cro dimer, the complex that is formed in the crystals by the isolated monomer appears to correspond to a sequence-independent mode of association. The overall orientation of the protein relative to the DNA is markedly different from that observed for Cro dimer bound to a consensus operator. The recognition helix is rotated 48 degrees further out of the major groove, while the turn region of the helix-turn-helix remains in contact with the DNA backbone. All of the direct base-specific interactions seen in the wild-type Cro-operator complex are lost. Virtually all of the ionic interactions with the DNA backbone, however, are maintained, as is the subset of contacts between the DNA backbone and a channel on the protein surface. Overall, 25% less surface area is buried at the protein DNA interface than for half of the wild-type Cro-operator complex, and the contacts are more ionic in character due to a reduction of hydrogen bonding and van der Waals interactions. Based on this crystal structure, model building was used to develop a possible model for the sequence-nonspecific interaction of the wild-type Cro dimer with DNA. In the sequence-specific complex, the DNA is bent, the protein dimer undergoes a large hinge-bending motion relative to the uncomplexed form, and the complex is twofold symmetric. In contrast, in the proposed nonspecific complex the DNA is straight, the protein retains a conformation similar to the apo form, and the complex lacks twofold symmetry. The model is consistent with thermodynamic, chemical, and mutagenic studies, and suggests that hinge bending of the Cro dimer may be critical in permitting the transition from the binding of protein at generic sites on the DNA to binding at high affinity operator sites.     

DNA-binding domains of Fos and Jun do not induce DNA curvature: an investigation with solution and gel methods

We demonstrate the use of a DNA minicircle competition binding assay, together with DNA cyclization kinetics and gel-phasing methods, to show that the DNA-binding domains (dbd) of the heterodimeric leucine zipper protein Fos-Jun do not bend the AP-1 target site. Our DNA constructs contain an AP-1 site phased by 1-4 helical turns against an A-tract-directed bend. Competition binding experiments reveal that (dbd)Fos-Jun has a slight preference for binding to linear over circular AP-1 DNAs, independent of whether the site faces in or out on the circle. This result suggests that (dbd)Fos-Jun slightly stiffens rather than bends its DNA target site. A single A-tract bend replacing the AP-1 site is readily detected by its effect on cyclization kinetics, in contrast to the observations for Fos-Jun bound at the AP-1 locus. In contrast, comparative electrophoresis reveals that Fos-Jun-DNA complexes, in which the A-tract bend is positioned close (1-2 helical turns) to the AP-1 site, show phase-dependent variations in gel mobilities that are comparable with those observed when a single A-tract bend replaces the AP-1 site. Whereas gel mobility variations of Fos-Jun-DNA complexes decrease linearly with increasing Mg2+ contained in the gel, the solution binding preference of (dbd)Fos-Jun for linear over circular DNAs is independent of Mg2+ concentration. Hence, gel mobility variations of Fos-Jun-DNA complexes are not indicative of (dbd)Fos-Jun-induced DNA bending (upper limit 5 degrees) in the low salt conditions of gel electrophoresis. Instead, we propose that the gel anomalies depend on the steric relationship of the leucine zipper region with respect to a DNA bend.     

Specificity and symmetry in the interaction of calmodulin domains with the skeletal muscle myosin light chain kinase target sequence

The specificity of interaction of the isolated N- and C-terminal domains of calmodulin with peptide WFFp (Ac-KRRWKKNFIAVSAANRFK-amide) and variants of the target sequence of skeletal muscle myosin light chain kinase was investigated using CD and fluorescence. Titrations show that two molecules of either domain bind to 18-residue target peptides. For WFFp, the C-domain binds with 4-fold higher affinity to the native compared with the non-native site; the N-domain shows similar affinity for either site. The selectivity of the C-domain suggests that it promotes occupancy of the correct binding site for intact calmodulin on the target sequence. Far UV CD spectra show the extra helicity induced in forming the 2:1 C-domain-peptide or the 1:1:1 C-domain-N-domain-peptide complex is similar to that induced by calmodulin itself; binding of the C-domain to the Trp-4 site is essential for developing the full helicity. Calmodulin-MLCK-peptide complexes show an approximate two-fold rotational relationship between the two highly homologous domains, and the 2:1 C (or N)-domain-peptide complexes evidently have a similar rotational symmetry. This implies that a given domain can bind sequences with opposite peptide polarities, significantly increasing the possible range of conformations of calmodulin in its complexes, and extending the versatility and diversity of calmodulin-target interactions.     

Comparison of the DNA binding characteristics of the related zinc finger proteins WT1 and EGR1

The interactions of the related zinc finger proteins WT1 and EGR1 with DNA have been investigated using a quantitative binding assay. A recombinant peptide containing the four zinc fingers of WT1 binds to the dodecamer DNA sequence GCG-TGG-GCG-TGT with an apparent dissociation constant (Kd) of (1.14 +/- 0.09) x 10(-9) M under conditions of 0.1 M KCl, pH 7.5, at 22 degrees C. Under the same conditions, a recombinant peptide containing the three zinc fingers of EGR1 binds to the dodecamer sequence, the first nine bases comprising the EGR consensus binding site, with an apparent Kd of (3.55 +/- 0.24) x 10(-9) M. The nature of the equilibrium binding of each peptide to DNA was investigated as a function of temperature, pH, monovalent salt concentration, and divalent salt concentration. The interaction of WT1 with DNA is an entropy-driven process, while the formation of the EGR1-DNA complex is favored by enthalpy and entropy. The DNA binding activities of both proteins have broad pH optima centered at pH 8.0. The binding of both proteins to DNA shows similar sensitivity to ionic strength, with approximately 7.7 +/- 0.8 ion pairs formed in the EGR1-DNA complex and 9.2 +/- 1.8 ion pairs formed in the WT1-DNA complex. Results of measuring the effects of point mutations in the DNA binding site on the affinity of WT1 and EGR1 indicates a significant difference in the optimal binding sites: for EGR1, the highest affinity binding site has the sequence GNG-(T/G)GG-G(T/C)G, while for WT1 the highest affinity binding site has the sequence G(T/C)G-(T/G)GG-GAG-(T/C)G(T/C).     

Crystal structure of the effector-binding domain of the trehalose-repressor of Escherichia coli, a member of the LacI family, in its complexes with inducer trehalose-6-phosphate and noninducer trehalose

The crystal structure of the Escherichia coli trehalose repressor (TreR) in a complex with its inducer trehalose-6-phosphate was determined by the method of multiple isomorphous replacement (MIR) at 2.5 A resolution, followed by the structure determination of TreR in a complex with its noninducer trehalose at 3.1 A resolution. The model consists of residues 61 to 315 comprising the effector binding domain, which forms a dimer as in other members of the LacI family. This domain is composed of two similar subdomains each consisting of a central beta-sheet sandwiched between alpha-helices. The effector binding pocket is at the interface of these subdomains. In spite of different physiological functions, the crystal structures of the two complexes of TreR turned out to be virtually identical to each other with the conformation being similar to those of the effector binding domains of the LacI and PurR in complex with their effector molecules. According to the crystal structure, the noninducer trehalose binds to a similar site as the trehalose portion of trehalose-6-phosphate. The binding affinity for the former is lower than for the latter. The noninducer trehalose thus binds competitively to the repressor. Unlike the phosphorylated inducer molecule, it is incapable of blocking the binding of the repressor headpiece to its operator DNA. The ratio of the concentrations of trehalose-6-phosphate and trehalose thus is used to switch between the two alternative metabolic uses of trehalose as an osmoprotectant and as a carbon source.     

DNA binding and transactivation characteristics of the mosquito ecdysone receptor-Ultraspiracle complex

The steroid hormone 20-hydroxyecdysone is a key regulatory factor, controlling blood-meal triggered egg maturation in mosquitoes. To elucidate the ecdysone hierarchy governing this event, we cloned and characterized the ecdysone receptor (AaEcR) and the nuclear receptor Ultraspiracle (AaUSP), a retinoid X receptor homologue, from the mosquito, Aedes aegypti, which form a functional complex capable of ligand and DNA binding. Here we analyzed the DNA-binding properties of the AaEcR.AaUSP heterodimer with respect to the effects of nucleotide sequence, orientation, and spacing between half-sites in natural Drosophila and synthetic ecdysone response element (EcREs). By using an electrophoretic gel mobility shift assay, we showed that AaEcR.AaUSP exhibits a broad binding specificity, forming complexes with inverted (IR) and direct (DR) repeats of the nuclear receptor response element half-site consensus sequence AGGTCA separated by spacers of variable length. A single nucleotide spacer was optimal for both imperfect (IRhsp-1) and perfect (IRper-1) inverted repeats; adding or removing 1 base pair in an IRhsp-1 spacer practically abolished binding. However, changing the half-site to the consensus sequence AGGTCA (IRper-1) increased binding of AaEcR.AaUSP 10-fold over IRhsp-1 and, at the same time, reduced the stringency of the spacer length requirement, with IRper-0 to IRper-5 showing detectable binding. Spacer length was less important in DRs of AGGTCA (DR-0 to DR-5); although 4 bp was optimal, DR-3 and DR-5 bound AaEcR.AaUSP almost as efficiently as DR-4. Furthermore, AaEcR. AaUSP also bound DRs separated by 11-13 nucleotide spacers. Competition experiments and direct estimation of binding affinity (Kd) indicated that, given identical consensus half-sites and an optimal spacer, the AaEcR.AaUSP heterodimer bound an IR with higher affinity than a DR. Co-transfection assays utilizing CV-1 cells demonstrated that the mosquito EcR.USP heterodimer is capable of transactivating reporter constructs containing either IR-1 or DR-4. The levels of transactivation are correlated with the respective binding affinities of the response elements (IRper-1 > DR-4 > IRhsp-1). Taken together, these analyses predict broad variability in the EcREs of mosquito ecdysone-responsive genes.