Reposition of an implantable cardioverter defibrillator generator from an abdominal pocket to a subpectoral location using the existing electrode

The size of today's implantable cardioverter defibrillator generators makes a subpectoral position feasible even when an existing generator is located abdominally. Elective replacement with reposition of the generator from an abdominal to a subpectoral pocket without implantation of another electrode is described.     

Erosion of internal cardioverter defibrillator pocket and migration of pulse generator into the peritoneal cavity

ICD therapy for life-threatening arrhythmias is well established. As more patients are treated, the incidence of recognized and new complications may increase. We report ICD pocket erosion and migration of the pulse generator into the peritoneal cavity in two patients.     

The quality of life after the implantation of a cardioverter/defibrillator in malignant arrhythmias

Quality of life after implantation of an automatic implantable cardioverter/defibrillator (ICD) was assessed by questionnaire in 43 patients (38 males, 5 females; mean age 57 +/- 16 years) with treatment-resistant symptomatic ventricular arrhythmias. 37 of the 43 patients felt better after ICD implantation. 23 were always conscious of having an ICD, but 18 had got used to it in less than 2 months. 15 patients reported being afraid of an ICD shock, while eight noted physical discomfort caused by the ICD. Limitations concerning their professional, recreational and social activities were reported by six patients. 41 of the 43 patients confirmed that the ICD had been helpful, enabling 23 to return to an active life. 42 would recommend implantation to others if indicated. These data demonstrate that there is a remarkably high degree of acceptance of the ICD. Survival rate after implantation is thus not the only criterion of success. All aspects of the quality of life should be taken into consideration before implantation is decided upon.     

Influence of polarity reversal on defibrillation success with biphasic shocks and a transvenous/subcutaneous defibrillator system in a porcine animal model

Clinical studies show that polarity reversal affects defibrillation success in transvenous monophasic defibrillators. Current devices use biphasic shocks for defibrillation. We investigated in a porcine animal model whether polarity reversal influences defibrillation success with biphasic shocks. In nine anesthetized, ventilated pigs, the defibrillation efficacy of biphasic shocks (14.3 ms and 10.8 ms pulse duration) with "initial polarity" (IP, distal electrode = cathode) and "reversed polarity" (RP, distal electrode = anode) delivered via a transvenous/subcutaneous lead system was compared. Voltage and current of each defibrillating pulse were recorded on an oscilloscope and impedance calculated as voltage divided by current. Cumulative defibrillation success was significantly higher for RP than for IP for both pulse durations (55% vs 44%, P = 0.019) for 14.3 ms (57% vs 45%, P < 0.05) and insignificantly higher for 10.8 ms (52% vs 42%, P = ns). Impedance was significantly lower with RP at the trailing edge of pulse 1 (IP: 44 +/- 8.4 vs RP: 37 +/- 9.3 with 14.3 ms, P < 0.001 and IP: 44 +/- 6.2 vs RP: 41 +/- 7.6 omega with 10.8 ms, P < 0.001) and the leading edge of pulse 2 (IP: 37 +/- 5 vs RP: 35 +/- 4.2 omega with 14.3 ms, P = 0.05 and IP: 37.5 +/- 3.7 vs RP: 36 +/- 5 omega with 10.8 ms, P = 0.02). In conclusion, in this animal model, internal defibrillation using the distal coil as anode results in higher defibrillation efficacy than using the distal coil as cathode. Calculated impedances show different courses throughout the shock pulses suggesting differences in current flow during the shock.     

Comparison of metoprolol and sotalol in preventing ventricular tachyarrhythmias after the implantation of a cardioverter/defibrillator

The purpose of this prospective study was to evaluate, on an intention-to-treat basis, the efficacy of d,l-sotalol and metoprolol with regards to the recurrence of arrhythmic events after implantable cardioverter defibrillator (ICD) implantation. After ICD implantation, 70 patients were randomly assigned to treatment with either metoprolol (mean dosage 104+/-37 mg/day in 35 patients) or d,l-sotalol (mean dosage 242+/-109 mg/day in 35 patients). During follow up ventricular tachycardia (VT), fast VT, and ventricular fibrillation (VF) episodes were calculated. Metoprolol treatment led to a marked reduction in the recurrence of arrhythmic events. Actuarial rates for absence of VT recurrence at 1 and 2 years were significantly higher in the metoprolol group compared with the d,l-sotalol group (83% and 80% vs 57% and 51%, respectively, p=0.016). The actuarial rates for absence of fast VT or VF were 80% in the metoprolol group compared with 46% in the d,l-sotalol group (p=0.002). During a follow up of 26+/-16 months, there were 3 deaths in the metoprolol group compared with 6 deaths in the d,l-sotalol group. Actuarial rates of overall survival were not significantly different in the 2 groups (91% vs 83%, p=0.287). In this prospective, randomized, controlled study the recurrence rate of ventricular tachyarrhythmias in patients treated with metoprolol was lower than in patients treated by d,l-sotolol.     

Effects of left atrial dilatation on the endocardial atrial defibrillation threshold: a study in an ovine model of pacing induced dilated cardiomyopathy

Left atrial (LA) dilation is a common finding in patients with chronic atrial fibrillation (AF). Progressive dilatation may alter the atrial defibrillation threshold (ADFT). In our study, epicardial electrodes were implanted on the LA free wall and right ventricular apex of eight adult sheep. Large surface area, coiled endocardial electrodes were positioned in the coronary sinus and right atrium (RA). LA dilatation was induced by rapid ventricular pacing (190 beats/min) for 6 weeks and echocardiographically assessed weekly along with the ADFT (under propofol anesthesia). LA effective refractory period (ERP) was measured every 2-3 days using a standard extra stimulus technique and 400 ms drive. The AF cycle length (AFCL) was assessed from LA electrograms. During the 6 weeks of pacing the mean LA area increased from 6.1 +/- 1.5 to 21.3 +/- 2.4 cm2. There were no significant changes in the mean ADFT (122 +/- 15 V), circuit impedance (46 +/- 5 omega), or LA AFCL (136 +/- 23 ms). There was a significant increase in the mean LA ERP (106 +/- 10 ms at day 0, and 120 +/- 13 ms at day 42 of pacing). In this study, using chronically implanted defibrillation leads, the minimal energy requirements for successful AF were not significantly altered by ongoing left atrial dilatation. This finding is a further endorsement of the efficiency of the coronary sinus/RA shock vector. Furthermore, the apparent stability of the AF present may be a further indication of a link between the type of AF and the ADFT.     

Effect of shock polarity on biphasic defibrillation thresholds using an active pectoral lead system

The diagnosis of preeclampsia is made on the basis of hypertension, proteinuria and edema. Unfortunately, all three of these findings can be seen in the patient who is experiencing a flare of systemic lupus erythematosus. The management of these conditions is entirely different. Preeclampsia frequently results in the need for delivery and occasionally, especially when remote from term, can result in significant neonatal morbidity and mortality. Systemic lupus may be treatable with a variety of pharmacologic agents. It is not always possible to make the distinction between active lupus and preeclampsia, and occasionally the two occur concurrently. Nevertheless, the goal of the rheumatologist and perinatologist is to try to make that distinction. Physical findings and serologic markers can be useful in helping to distinguish between these two diagnoses. Under certain circumstances, delivery is indicated despite the presence of continued uncertainty as to the actual diagnosis.     

Effect of a single element subcutaneous array electrode added to a transvenous electrode configuration on the defibrillation field and the defibrillation threshold

Even with the use of biphasic shocks, up to 5% of patients need an additional subcutaneous lead to obtain a defibrillation safety margin of at least 10 J. The number of patients requiring additional subcutaneous leads may even increase, because recent generation devices have a < 34 J maximum output in order to decrease their size. In 20 consecutive patients, a single element subcutaneous array lead was implanted in addition to a transvenous lead system consisting of a right ventricular (RV) and a vena cava superior lead using a single infraclavicular incision. The RV lead acted as the cathode; the subcutaneous lead and the lead in the subclavian vein acted as the anode. The biphasic defibrillation threshold was determined using a binary search protocol. Patients were randomized as to whether to start them with the transvenous lead configuration or the combination of the transvenous lead and the subcutaneous lead. In addition, a simplified assessment of the defibrillation field was performed by determining the interelectrode area for the transvenous lead only and the transvenous lead in combination with the subcutaneous lead from a biplane chest X ray. The intraoperative defibrillation threshold was reconfirmed after 1 week, after 3 months, and after 12 months. The mean defibrillation threshold with the additional subcutaneous lead was significantly (P = 0.0001) lower (5.7 +/- 2.9 J) than for the transvenous lead system (9.5 +/- 4.6 J). With the subcutaneous lead, the impedance of the high voltage circuit decreased from 48.9 +/- 7.4 omega to 39.2 +/- 5.0 omega. In the frontal plane, the interelectrode area increased by 11.3% +/- 5.5% (P < 0.0001) and in the lateral plane by 29.5% +/- 12.4% (P < 0.0001). The defibrillation threshold did not increase during follow-up. Complications with the subcutaneous electrode were not observed during a follow-up of 15.8 +/- 2 months. The single finger array lead is useful in order to lower the defibrillation threshold and can be used in order to lower the defibrillation threshold.     

Sensing lead insulation defect resulting in a damage of the ICD pulse generator case

Eight months after ICD implantation with an electrically active case the patient presented with ICD system sensing failure. Upon reoperation, we found an insulation defect of the proximal sensing lead and the generator case showed arc marks suggesting a short circuit between the sensing lead and case. The generator was replaced, the original sensing lead insulated, and a new sensing lead inserted. Bench testing of the explanted generator showed a damaged internal circuitry. Proximal lead insulation defects combined with electrically active cases may result in damage of the case. The potential damage of internal circuitry warrants generator replacement.     

石墨添加量对热压镍铬钼-石墨复合材料性能的影响

本论文研究了热压制备添加石墨的镍铬钼复合材料的力学性能及摩擦磨损特性。结果表明，随着石墨添加量的增加，复合材料的抗拉强度和伸长率逐渐下降，硬度逐渐上升，摩擦系数逐渐变大。其中添加石墨后的复合材料硬度明显高于不添加石墨的基体合金硬度，石墨添加量（质量分数）为1％时复合材料的磨损率最低。新材料中由于添加石墨而形成的硬质碳化物及游离石墨的存在，正是这种力学性能及摩擦磨损变化规律的根本原因。     

Clinical shock tolerability and effect of different right atrial electrode locations on efficacy of low energy human transvenous atrial defibrillation using an implantable lead system

OBJECTIVES: The objectives of this study were 1) to evaluate the effect of different right atrial electrode locations on the efficacy of low energy transvenous defibrillation with an implantable lead system; and 2) to qualitate and quantify the discomfort from atrial defibrillation shocks delivered by a clinically relevant method. BACKGROUND: Biatrial shocks result in the lowest thresholds for transvenous atrial defibrillation, but the optimal right atrial and coronary sinus electrode locations for defibrillation efficacy in humans have not been defined. METHODS: Twenty-eight patients (17 men, 11 women) with chronic atrial fibrillation (AF) (lasting > or = 1 month) were studied. Transvenous atrial defibrillation was performed by delivering R wave-synchronized biphasic shocks with incremental shock levels (from 180 to 400 V in steps of 40 V). Different electrode location combinations were used and tested randomly: the anterolateral, inferomedial right atrium or high right atrial appendage to the distal coronary sinus. Defibrillation thresholds were defined in duplicate by using the step-up protocol. Pain perception of shock delivery was assessed by using a purpose-designed questionnaire; sedation was given when the shock level was unacceptable (tolerability threshold). RESULTS: Sinus rhythm was restored in 26 of 28 patients by using at least one of the right atrial electrode locations tested. The conversion rate with the anterolateral right atrial location (21 [81%] of 26) was higher than that with the inferomedial right atrial location (8 [50%] of 16, p < 0.05) but similar to that with the high right atrial appendage location (16 [89%] of 18, p > 0.05). The mean defibrillation thresholds for the high right atrial appendage, anterolateral right atrium and inferomedial right atrium were all significantly different with respect to energy (3.9 +/- 1.8 J vs. 4.6 +/- 1.8 J vs. 6.0 +/- 1.7 J, respectively, p < 0.05) and voltage (317 +/- 77 V vs. 348 +/- 70 V vs. 396 +/- 66 V, respectively, p < 0.05). Patients tolerated a mean of 3.4 +/- 2 shocks with a tolerability threshold of 255 +/- 60 V, 2.5 +/- 1.3 J. CONCLUSIONS: Low energy transvenous defibrillation with an implantable defibrillation lead system is an effective treatment for AF. Most patients can tolerate two to three shocks, and, when the starting shock level (180 V) is close to the defibrillation threshold, they can tolerate on average a shock level of 260 V without sedation. Electrodes should be positioned in the distal coronary sinus and in the high right atrial appendage to achieve the lowest defibrillation threshold, although other locations may be suitable for certain patients.     

Effect of ventricular dilatation on defibrillation threshold in the isolated perfused rabbit heart

INTRODUCTION: Ventricular dilatation has important electrophysiologic effects, but its effect on ventricular defibrillation threshold (DFT) is unknown. METHODS AND RESULTS: A fluid-filled, latex balloon was placed in the left ventricular cavity of 19 isolated rabbit hearts. In each experiment, an undilated volume (equivalent to a left ventricular end-diastolic pressure of approximately 0 mmHg) was compared to a dilated volume achieved by adding 1.0 mL of saline (n = 10) or 5% dextrose (n = 9) to the intracavitary balloon. Left ventricular effective refractory period (ERP) and DFT were determined at each volume. Defibrillation was attempted with a monophasic shock delivered between a patch electrode positioned over the posterior left ventricle (cathode) and a metallic aortic cannula (anode). DFT was determined using a modified "down/up" protocol with 10 V steps. Ventricular dilatation increased the left ventricular end-diastolic pressure from 0 +/- 0.5 mmHg to 35 +/- 3 mmHg (P < 0.001), decreased the average left ventricular ERP 15% (from 116 +/- 3 msec to 99 +/- 3 msec; P < 0.001), and increased the average DFT 30% (from 96 +/- 4 V to 125 +/- 7 V; P < 0.001). In one third of experiments, the dilated DFT was > or = 150% of the DFT at zero volume. The mechanism of the observed increase in DFT is unknown but may be related to the decrease in refractoriness observed with ventricular dilatation. CONCLUSION: Acute ventricular dilatation in this model increased DFT an average of 30%, an effect not previously described. This observation may have implications for patients with implantable cardioverter defibrillators.     

Effect of an antiandrogen on the lymphoid system

A side-effect of the administration of cyproterone acetate, an antiandrogenic steroid, to newborn, juvenile or adult male mice (in doses comparable to those used clinically) was found in a marked reduction of the white pulp of the spleen and reduced weight or even absence of the thymus.     

Ce/Mg处理对M50轴承钢洁净度的影响

采用真空感应熔炼工艺冶炼航空轴承钢M50,对比分析了Ce处理、Mg处理和Ce–Mg复合处理对氧、硫含量和夹杂物分布特征的影响,结合热力学计算,阐明了加入Ce、Mg元素对钢液洁净度的影响机理。研究发现,Ce具有很强的脱氧、脱硫能力,加入Ce会优先生成Ce₂O₂S夹杂物,随着钢液中氧含量的降低,Ce还会与As等有害杂质元素结合,起到净化钢液的效果。过量的Ce会加剧其与镁铝尖晶石材质耐火材料的反应,导致钢中夹杂物数量的增加,Ce的质量分数为0.018%时,钢中夹杂物的尺寸和数量最小;添加Mg不仅可以脱氧、脱硫,还可以抑制Ce与镁铝尖晶石耐材的反应,Ce–Mg复合处理可以显著降低钢中的夹杂物的尺寸和数量,将钢中的氧的质量分数降低至0.00075%。      

CaCO3微粉对锆酸钙性能的影响

以Ca（OH）₂和m-ZrO₂为原料,按物质的量1:1进行配料,添加不同质量分数的CaCO₃微粉,混料均匀后压样,经1600℃保温3 h后制备得到锆酸钙（CaZrO₃）。利用显气孔体密测定仪、X射线衍射仪、扫描电子显微镜和X'Pert plus图象处理软件分析CaCO₃微粉对锆酸钙材料烧结性能、物相组成及微观结构的影响。结果表明:当没有添加CaCO₃微粉时,试样烧结前后线收缩率为8.23%,体积密度为3.40 g·cm-3,显气孔率为14.5%,CaZrO₃晶粒尺寸为4.08μm;当加入质量分数为8% CaCO₃微粉时,试样烧结前后线收缩率为14.89%,制备锆酸钙体积密度为4.02 g·cm-3,显气孔率为8.6%,CaZrO3晶粒尺寸为5.45μm;由此可见,添加少量CaCO₃微粉有利于锆酸钙烧结致密性和晶粒长大。