共查询到19条相似文献,搜索用时 156 毫秒
1.
在塑料消费中,聚烯烃占60%以上,是消费量最大的塑料品种。聚烯烃技术的快速发展是其市场占有率不断提高的关键,其科学技术的发展已引起学术界和产业界的广泛关注。我国已成为世界主要的塑料消费国和生产国。介绍了聚烯烃材料的重要地位和发展趋势,分别就聚烯烃中的高分子物理、聚合工艺、催化剂和助剂的研究进展介绍了我国聚烯烃技术的发展现状。强调了聚烯烃技术对可持续发展和我国石油化工、煤化工产业的发展均十分重要,必将得到持续、稳定的发展。 相似文献
2.
3.
4.
5.
硼化物陶瓷:烧结致密化、微结构调控与性能提升 总被引:5,自引:0,他引:5
TiB2、ZrB2、HfB2、B4C及BN为代表的硼化物陶瓷具有优异的物理化学性能,在超高温、超硬以及超疏水等极限条件下有广阔的应用前景,但材料的烧结致密化困难、断裂韧性低等问题制约了它们更为广泛的应用.本文针对无压烧结在材料制备过程中的优势,探讨了影响硼化物陶瓷无压烧结的主要因素,总结了以"除氧"机制为代表的硼化物陶瓷无压烧结技术;针对硼化物陶瓷韧性低的不足,介绍了以"板晶增韧"、"纳米相增强"为代表的硼化物陶瓷微结构调控手段和强韧化措施.最后,文章还对硼化物陶瓷的织构化设计、制备方法与性能提升进行了简要介绍. 相似文献
6.
7.
8.
9.
聚烯烃材料应用广泛,但难以降解的特性导致其废弃物对环境造成巨大威胁。本文针对聚烯烃材料的生物降解,从降解原理、降解方式、影响因素、微生物和降解检测方法等方面做了较详细的介绍,并结合实际对今后聚烯烃生物降解研究提出展望。 相似文献
10.
本文综述了先进结构陶瓷的发展现状 ,并介绍了其主要连接方法之一的钎焊连接的主要问题以及针对这些问题国内外开展的最新研究工作与结果 相似文献
11.
简述了炭黑填充聚烯烃防静电机理,对影响炭黑填充聚烯烃防静电塑料薄膜性能的几个主要因素进行了讨论,探讨并提出了防静电塑料薄膜的制造工艺过程控制的要点。 相似文献
12.
13.
多层陶瓷电容器研究现状和发展展望 总被引:7,自引:0,他引:7
片式多层陶瓷电容器是新型片式元器件门类的主要品种之一.介绍了多层陶瓷电容器国内外研究现状和发展状况,重点介绍了镍内电极多层陶瓷电容器、高容量多层陶瓷电容器和高压多层陶瓷电容器,同时指出我国多层陶瓷电容器行业存在的问题和发展方向. 相似文献
14.
关于先进结构陶瓷的研究 总被引:43,自引:1,他引:43
本文回顾了我国先进陶瓷材料研究四十余年来的进展.我国一贯重视陶瓷学的基础研究和应用基础研究对陶瓷工艺的指导作用,同时亦更注意新材料的工艺研究.本文简要地介绍了这些方面的主要成就.最后,对先进结构陶瓷材料研究需要考虑的问题提出一些拙见,以供讨论. 相似文献
15.
Chunmin Wang Jin Wang Chul B. Park Young-Wook Kim 《Journal of Materials Science》2007,42(8):2854-2861
A novel processing route for fabricating cellular and microcellular ceramics with controllable open-cell content has been
developed. The proposed strategy for producing cellular and microcellular ceramics involves: (i) development of desired foamable
polysiloxane–polyolefin blends by using a compounder element, in which the polyolefin phase is uniformly dispersed in the
polysiloxane matrix, (ii) foaming the obtained blends by implementing the thermodynamic instability principle to produce a
cellular or microcellular ceramic precursor structure, and (iii) completing the organic–inorganic transition without sacrificing
the obtained cellular or microcellular structure and inducing open-channels in the cell walls by burning out the sacrificial
dispersed polyolefin phase at elevated temperatures. By controlling the viscosity of the dispersed polyolefin phase, the polyolefin
concentration and compounding parameters, the polysiloxane–polyolefin blend morphology can be varied. Furthermore, plus a
deliberate control of foaming and pyrolyzing parameters, the foam morphology and open-cell content of produced cellular and
microcellular ceramics can be adjusted. In this paper, the technique to get a desired cellular and microcellular ceramic precursor
structure is demonstrated. The deliberate pyrolysis technique to complete the organic–inorganic transition and the mechanical
properties of the obtained microcellular ceramics will be discussed in another paper. 相似文献
16.
17.
18.