共查询到19条相似文献,搜索用时 189 毫秒
1.
为了提高SnO2的气敏性能,以PVP为有机溶剂,采用静电纺丝法制备了多级结构的SnO2纳米纤维,利用XRD,SEM和TEM等技术对材料的结构、形貌进行了表征,并制备了SnO2旁热式气敏元件.采用静态气体测试系统对SnO2元件进行了气敏测试.在工作温度300℃时,对0.5~50 ppm甲醛进行了气敏测试.测试结果表明:SnO2气敏元件对甲醛气体具有优异的响应灵敏度,快速的响应及响应恢复特性、较好的选择性.采用静电纺丝制备的多级结构SnO2纳米纤维对甲醛表现出良好的气敏特性. 相似文献
2.
3.
4.
静电纺丝技术由于简单的装置和制备过程,以及所使用材料的多样和应用领域的广泛,被认为是制备纳米纤维材料最具发展潜力的方法.简述了静电纺丝技术和影响纺丝质量的相关因素;介绍了静电纺丝制备半导体氧化物纳米纤维的方法及纳米纤维在气体传感器领域的应用;比较了几种纳米纤维和纳米线纳米棒等气敏元件的敏感特性;最后分析了纳米纤维具有优... 相似文献
5.
6.
7.
迈向微型化、集成化及具有高选择性和灵敏度的固体电解质气体传感器已成为未来的发展趋势。文章采用磁控溅射法成功制备了WO_(3)气体传感器敏感电极材料,并通过X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)等表征手段研究了WO_(3)的结构、成分和形貌并测试了该气体传感器对NO_(2)的气敏性能。XRD结果表明,当退火温度大于400℃时,WO_(3)出现(200)衍射峰,且该衍射峰随退火温度增加而显著增强,表明WO_(3)结晶质量增加。SEM测试结果表明,随着退火温度的升高,薄膜的晶粒尺寸逐渐增大。当退火温度达到500℃时,采用谢乐公式计算其晶粒尺寸达到23 nm。EDS结果表明,退火温度对薄膜的成分也有较大影响,O:W原子比例呈现增大趋势,由2.7增加到3.2,这与XPS结果相符合。通过高温气敏性能测试表明,所制得的WO_(3)敏感电极对NO_(2)表现出了明显的气体响应。本研究为制备微型化、高选择性和灵敏性的固体电解质气体传感器提供了一定的研究基础。 相似文献
8.
SnO_2复合薄膜甲烷气敏传感器研究进展 总被引:5,自引:4,他引:1
甲烷是具有稳定四面体分子结构的碳氢化合物,其键能大、分解困难且活性低,是煤矿安全生产的主要障碍及一种温室气体。SnO2半导体薄膜制备工艺简单、成本低廉、性能稳定,是甲烷传感器研发的主流气敏材料。科技人员进行了很多相关研究以提高传感器的性能,如新气敏材料的研究、催化剂/添加剂的使用、气敏机理的探索、传感器结构改进及气敏膜的表面修饰改性等。本文从气敏膜制备与改性、传感器结构设计及气敏机理研究三个方面,综述了近年来SnO2复合薄膜甲烷传感器的研究进展,结果表明:①应开发复合型金属氧化物半导体及高分子气敏材料,以提高灵敏度、选择性与稳定性;②研发微型智能传感器是未来发展的主要方向,而自组装技术应可用于制备金属氧化物半导体薄膜气体传感器微纳阵列;③气敏机理应与实验测试、材料设计及器件制备进行对照研究。 相似文献
9.
随着市场对有机挥发性气体检测需求的提高,半导体气体传感器因其工作温度低、循环稳定性良好、响应恢复时间短等特性受到了广泛关注。三乙胺是一种重要的化工原料,然而,其挥发性特性及刺激性气味和低毒性对人类的生命安全造成了威胁。近年来国内外有不少三乙胺气体检测的研究论文和产品介绍,但全面性的综述文章极少。本文以前期学者对三乙胺气体检测的工作为抓手,首先讲述了三乙胺传感器的响应机理和提高气敏响应的内在因素,总结了以不同金属氧化物为基质的复合型半导体传感器对三乙胺气体的检测情况,并详细介绍了不同材料形貌与气敏性能之间的关系。另外,对部分材料的气敏增强机理作了简要概述。最终,对三乙胺气体传感领域做出展望,并为后续开展相关领域工作提供了理论基础。 相似文献
10.
11.
12.
M. Alagiri S. Ponnusamy C. Muthamizhchelvan 《Journal of Materials Science: Materials in Electronics》2012,23(3):728-732
Nickel oxide nanoparticles have been synthesized in the presence of agarose polysaccharide by sol–gel method. The structure,
morphology, optical and magnetic properties of the product was examined by X-ray diffraction, transmission electron microscopy,
UV–visible spectrophotometer and superconducting quantum interference device magnetometer. The result of thermogravimetric
analysis of the precursor product showed that the proper calcination temperature was 400 °C. X-ray diffraction result revealed
that the obtained product was nickel oxide with face-centered cubic structure. TEM image demonstrated that the nickel oxide
nanoparticles have spherical shape with size around 3 nm. Analysis of FTIR spectra confirmed the composition of product. The
optical absorption band gap of the NiO nanoparticles was estimated to be 3.51 eV. Magnetic measurement showed that the nickel
oxide nanoparticles exhibit superparamagnetic behavior at 300 K. Moreover, the nanoparticles show ferromagnetic interactions
at 4.2 K owing to the existence of uncompensated moments on the surface of the nanoparticles. 相似文献
13.
《Science and Technology of Advanced Materials》2002,3(3):271-282
Natural olivine is used for gasification of biomass in a fluidised bed. Characterisations by X-ray diffraction and electron microscopies (SEM and TEM) have proved the presence of a (Mg,Fe)2SiO4 structure (Mg/Fe ratio: 9/1) with a rather broad distribution in elemental composition. Temperature programmed reduction has revealed equally the presence of iron oxides outside of this structure. The nature of free iron oxides can be both modified by increasing the temperature of calcination and confirmed by measurements of magnetism.The introduction of nickel oxide upon natural olivine is obtained by impregnation with a nitrate salt. The type of interaction of nickel oxide with olivine is different depending upon the preparation method and the calcination temperature. For calcination at 1100 °C, the effects of the amount of NiO and the number of impregnation have been studied. At a high temperature of calcination (1400 °C), NiO is integrated into the olivine structure and the amount of free iron increases. Integrated NiO on olivine is non-reducible, resulting in an inactive catalyst. At lower calcination temperatures grafted NiO is formed, a species which is reduced under catalytic test conditions without aggregation of particles. A single impregnation of nickel (5.5 wt% of NiO) gives a stable catalyst activated directly under reaction conditions (CH4+CO2) yielding 96% CO and 76% H2. Catalysts with lower amounts of NiO or a double impregnation of nickel salt lead to a less stable system.Analysis reveals that no change in olivine structure nor size of nickel deposit occurs under test conditions. Equally there are no carbon deposits formed on these catalysts. A model of the evolution of each catalytic system arising from the different preparation methods is proposed. The observed deactivation of such catalysts is attributed to the increase in the amount of free iron, which favours the oxidative properties of the catalytic system. 相似文献
14.
S. M. Badalyan M. N. Rumyantseva S. A. Nikolaev A. V. Marikutsa V. V. Smirnov A. S. Alikhanian A. M. Gaskov 《Inorganic Materials》2010,46(3):232-236
Nanocrystalline tin dioxide has been synthesized, and its surface has been modified with Au and NiO. Their distributions in
the nanocrystalline tin dioxide have been examined by X-ray diffraction and transmission electron microscopy. The NO2 sensing properties of the materials have been studied in the range 100–1000 ppb. Both gold and nickel enhance the NO2 response of SnO2. Codoping with Au and NiO markedly enhances its sensing response and, in addition, lowers the peak response temperature.
The observed effect of NO2 concentration in dry air on the sensing response of the SnO2〈Au, NiO〉 nanocomposite can be understood in terms of the sequence of processes that take place on the SnO2 surface upon nitrogen dioxide adsorption in the presence of chemisorbed oxygen. 相似文献
15.
《材料科学技术学报》2020,(3)
Approaches for the fabrication of a low power-operable formaldehyde(HCHO) gas sensor with high sensitivity and selectivity were performed by the utilization of an effective micro-structured platform with a micro-heater to reach high temperature with low heating power as well as by the integration of indium oxide(In_2O_3) nanofibers decorated with well-dispersed Au nanoparticles as a sensing material.Homogeneous In_2O_3 nanofibers with the large specific surface area were prepared by the electrospinning following by calcination process. Au nanoparticles with the well-controlled size as a catalyst were synthesized on the surface of In_2O_3 nanofibers. The Au-decorated In_2O_3 nanofibers were reliably integrated as sensing materials on the bridge-type micro-platform including micro-heaters and micro-electrodes.The micro-platform designed to maintain high temperature with low power consumption was fabricated by a microelectromechanical system(MEMS) technique. The micro-platform gas sensor consisting with Au-In_2O_3 nanofibers were fabricated effectively to detect HCHO gases with high sensitivity and selectivity. The HCHO gas sensing behaviors were schematically studied as a function of the gas concentration,the size of the adsorbed Au nanoparticles, the applied power to raise the temperature of a sensing part and the kind of target gases. 相似文献
16.
氧化镍和聚苯胺是典型的无机/有机电致变色材料,各有其优缺点。如果将两种材料相结合,可得到电致变色性能更加优良的NiO/PANI复合材料。本文通过水热法与电聚合相结合的方法制备了氧化镍(NiO)纳米线/聚苯胺(PANI)与氧化镍纳米片/聚苯胺核壳纳米结构。通过扫描电子显微镜、拉曼光谱和X射线光电子能谱和电化学测量装置研究了纳米复合结构的形貌、结构、成分和电致变色性能。研究成果显示,复合后NiO/PANI纳米线核壳结构在可见光与近红外区域的电致变色性能都获得了显著增强。而NiO/PANI纳米片核壳结构在可见光区域内电致变色性能有所减弱,但是在近红外区域内的光学对比度有显著增强。本工作将为研究新型低维无机/有机纳米结构电致变色材料与器件提供有益的参考。 相似文献
17.
C. Courson L. Udron A. Kiennemann Lin Liu 《Science and Technology of Advanced Materials》2013,14(3):271-282
Natural olivine is used for gasification of biomass in a fluidised bed. Characterisations by X-raydiffraction and electron microscopies (SEM and TEM) have proved the presence of a (Mg,Fe)2SiO4 structure (Mg/Fe ratio: 9/1) with a rather broad distribution in elemental composition. Temperature programmed reduction has revealed equally the presence of iron oxides outside of this structure. The nature of free iron oxides can be both modified by increasing the temperature of calcination and confirmed by measurements of magnetism.The introduction of nickel oxide upon natural olivine is obtained by impregnation with a nitrate salt. The type of interaction of nickel oxide with olivine is different depending upon the preparationmethod and the calcination temperature. For calcination at 1100 ºC, the effects of the amount ofNiO and the number of impregnation have been studied. At a high temperature of calcination (1400 ºC), NiO is integrated into the olivine structure and the amount of free iron increases. Integrated NiO on olivine is non-reducible, resulting in an inactive catalyst. At lower calcination temperatures grafted NiO is formed, a species which is reduced under catalytic test conditions without aggregation of particles. A single impregnation of nickel (5.5 wt% of NiO) gives a stable catalyst activated directly under reaction conditions (CH4 + CO2) yielding 96% CO and 76% H2. Catalysts with lower amounts of NiO or a double impregnation of nickel salt lead to a less stable system.Analysis reveals that no change in olivine structure nor size of nickel deposit occurs under test conditions. Equally there are no carbon deposits formed on these catalysts. A model of the evolution of each catalytic system arising from the different preparation methods is proposed. The observed deactivation of such catalysts is attributed to the increase in the amount of free iron, which favours the oxidative properties of the catalytic system. 相似文献
18.
金属氧化物半导体气敏传感器在有毒有害气体检测领域逐渐表现出巨大的应用前景,但是金属氧化物半导体传感器通常在检测时受环境湿度影响较大,这极大地限制了其应用。本文采用水热法成功在陶瓷管表面原位生长WO3纳米片,并以此为基底,在其表面生长ZIF-67多孔材料,通过调控W和Co的比例制备了不同比例的ZIF-67/WO3复合材料,利用XRD、SEM、FTIR和比表面积测试仪(BET)等方法对所制备的材料进行物相和形貌表征。针对其不同比例的复合材料的气敏性能进行了研究。结果表明:W∶Co摩尔比为 1∶1的ZIF-67/WO3(1∶1)复合材料性能最好,在220℃对三乙胺表现出优异的选择性,对体积分数为100×10?6的三乙胺的响应值可达140.34,响应和恢复时间分别为9 s和7 s。研究了空气相对湿度(RH)对ZIF-67/WO3(1∶1)传感器的影响,结果表明,在高达75%RH环境下该材料仍能保持较好的响应值,相对于纯WO3气敏材料具有较好的抗湿性能。 相似文献
19.
Fang Cui Weigen Chen Lingfeng Jin He Zhang Zikai Jiang Zihao Song 《Journal of Materials Science: Materials in Electronics》2018,29(23):19697-19709
As one of the most typical fault characteristic gases in transformer oil, the content of H2 is an important criterion for judging the operation state of power transformers; while online monitoring of such species through gas sensing technology could effectively detect latent faults and avoid accidents. Zinc oxide is a popular sensing material in recent years with limited sensitivity, selectivity and stability for gas detection, while zeolite imidazolate framework-8 (ZIF-8), one kind of metal–organic frameworks (MOFs) materials, possesses adjustable porosity, huge specific surface areas and good thermal stability, so it could perfectly remedy those defects. This paper studied gas-sensing properties of ZnO rods encapsulated by ZIF-8 (ZnO@ZIF-8) for H2. The morphologies, structures, and composition were characterized in detail by means of X-ray diffraction, scanning electron microscope, transmission electron microscope, X-ray photoelectron spectroscopy and energy disperse spectroscopy. H2 gas sensing properties of pure ZnO and ZnO@ZIF-8 composites were implemented based on gas sensing platform. Results suggested that the ZnO@ZIF-8 showed better sensitivity, selectivity and stability than pure ZnO rods, and meanwhile possessed lower optimum operating temperature upon H2 detection. Meanwhile the gas-sensing mechanism was analyzed comprehensively from three aspects of sensitivity, selectivity and stability. Our aim of this work is to propose a novel core–shell material with enhanced performance for H2 sensing and provide a new idea for developing high-performance materials to detect fault characteristic gases. 相似文献