共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
高温钛合金及钛基复合材料因具有比强度高、比刚度高、耐腐蚀、耐高温等优异性能,近几年来受到了广泛的关注。钛基复合材料的力学性能往往与增强相组织有关,增材制造技术的快速凝固可以使颗粒增强钛基复合材料中晶粒细化,力学性能得到提升。本文综述了高温钛合金及钛基复合材料的研究进展,分析了增强相组织对材料力学性能的影响,总结了增材制造技术制备钛基梯度功能材料的应用。通过增材制造技术制备钛基复合材料不仅可以提高复合材料的硬度和强度,还可以提高复合材料的延展性,采用增材制造技术制备高性能钛基复合材料将会成为未来的发展趋势。 相似文献
3.
多元多尺度钛基复合材料以其轻质、高强、耐热等优异的性能在航空航天等高新技术领域具有广阔的应用前景。从多元多尺度强化设计思路、先进加工技术、工程应用等方面综述了原位自生钛基复合材料的研究现状。指出了研究中的关键突破点与存在的问题,并提出了新的研究方向,进一步优化复合材料多元多尺度设计体系,挖掘材料内部结构设计,提高材料的综合性能;另一方面完善先进热加工技术与理论,改善钛基复合材料的加工性,推动轻质高强钛基复合材料在重大装备等领域的应用。 相似文献
4.
不连续增强相能有效改善钛基体的力学性能,提高钛基体的耐磨性、高温强度和抗氧化性,拓宽了钛合金的应用领域。陶瓷增强相具有硬度高、耐磨性好、热稳定、成本低廉等优点,成为不连续增强钛基复合材料的首选增强相,其中使用最为广泛的是TiC颗粒和TiB纤维。纳米碳材料因具有高弹性模量以及高抗拉强度等优异性能,可有效改善复合材料的强度、塑性,被用来制备高比强度的钛基复合材料,近年来成为最具潜力增强体材料。本文从增强体材料的选择出发,归纳总结了近十年不连续增强钛基复合材料的研究进展,综述了不同增强体材料对钛基体组织与力学性能的影响以及强化机理,提出进一步的研究方向,为提高钛基复合材料的整体性能和扩大其应用范围提供一定的依据。 相似文献
5.
原位合成钛基复合材料的最新进展 总被引:2,自引:0,他引:2
原位合成钛基复合材料以其高比强、高比模量引起了人们的广泛关注,尤其是如何提高其高温性能成为近年来钛基复合材料研究的热点.本文综合评述了原位合成钛基复合材料的最新进展,包括各种制备方法、增强体与钛基体的选择、各种增强体的反应体系以及原位合成钛基复合材料显微组织与力学性能,指出了原位合成钛基复合材料今后的发展方向. 相似文献
6.
7.
8.
9.
SiC纤维增强钛基复合材料研究进展 总被引:2,自引:0,他引:2
概述了作者研究组近年来在SiC纤维增强钛基复合材料研究领域开展的工作及取得的进展.采用具有自主知识产权的SiC纤维,研究了PVD先驱丝制备方法和真空热压/热等静压复合材料成形工艺,获得700℃拉伸强度>1500MPa的SiCf/Ti-6A1-4V复合材料,分别制备出长度>400mm和直径>200mm的钛基复合材料棒材和环形件.此外,分别采用粉末布与粉浆涂挂先驱丝两种低成本方法制备出钛基复合材料,确定了新的胶粘剂并优化了相关工艺参数. 相似文献
10.
原位自生钛基复合材料以其高比强度和高比模量引起了人们的广泛关注,尤其是如何提高其高温性能成为近年来钛基复合材料研究的热点.该文详细综述了原位自生钛基复合材料的各种制备方法、增强体与钛基体的选择、各种增强体的反应体系以及原位自生钛基复合材料的组织结构与力学性能,指出了原位自生钛基复合材料今后的发展方向. 相似文献
11.
12.
13.
近年来,镓基低熔点合金或镓基液态金属复合材料显示出非常广阔的应用前景,镓基低熔点合金在室温下兼具液体的流动性和金属性,其双重特性提供了复合材料的多样性。本文综述了镓基低熔点合金及其复合材料的发展背景,说明了其复合材料的制备、性能及应用,总结和讨论了镓基低熔点合金复合材料与金属或非金属材料复合的方法和机理,介绍了室温镓基液态金属复合材料在智能传感电子皮肤、印刷技术和热界面材料等多个领域的最新研究进展。最后,展望了镓基低熔点合金复合材料的未来发展,为其进一步研究、应用与发展提供了强有力的支持。 相似文献
14.
15.
难熔金属复合材料的开发与应用 总被引:3,自引:0,他引:3
王国宏 《稀有金属与硬质合金》1998,(2):58-65
介绍了难熔金属在现代复合材料中的应用现状、复合材料的制造方法.包括以难熔金属为基和以化合物为基的复合材料、层状复合材料、用难熔金属纤维增强的复合材料、梯度功能材料。超导复台材料等,展望了难熔金属复合材料的发展前景。 相似文献
16.
17.
Y. S. Wang G. J. Hao Y. Zhang J. P. Lin J. W. Qiao 《Metallurgical and Materials Transactions A》2014,45(5):2357-2362
In situ Ti-based metallic glass matrix composites are fabricated by the Bridgman solidification, and the mechanical properties are investigated. The fine dendrites about 2 to 10 μm are uniformly distributed in the glass matrix. The compressive results show that the composites have high strength and large plasticity. The fracture strength for the composite at the withdrawal velocity of 1.6 mm/s is as high as 3000 MPa and the total fracture strain is up to 31.5 pct. Particularly, the dendrite size of the current composite would decrease with the increasing of the withdrawal velocity, which leads to the higher yield strength. 相似文献
18.
19.
《Acta Metallurgica Materialia》1993,41(10):2797-2805
The tensile creep behavior of AlSiC metal matrix composites has been investigated and analyzed over the temperature range from 230 to 525°C. It is shown that plastic flow in these materials is lattice-diffusion controlled dislocation creep in the aluminum matrix. All data on AlSiC have been assessed by a creep relation developed for creep of metals at constant structure with the added contribution of a threshold stress. The threshold stress for creep in AlSiC composites is not a thermally-activated process and is shown to have a linear dependence with temperature becoming zero at 470°C. The threshold stress is higher for the whisker composites than for the particulate composites. The origin of the threshold stress is not well understood and cannot be explained by contemporary dislocation models involving dislocation bowing or unpinning around particles sites. The observed interparticle-interwhisker spacing is shown to influence the creep rate in the same way as observed for mechanical alloyed (MA) Al base materials. 相似文献
20.
Behzad Sadeghi Morteza Shamanian Fakhreddin Ashrafizadeh Mohsen Sanayei Jerzy A. Szpunar 《粉末冶金学》2018,61(1):50-63
Spark plasma sintering (SPS) has been recognised, in the recent past, as a very useful method to produce metal matrix composites with enhanced properties if compared with traditional powder metallurgy techniques. Obviously, the materials final properties are strongly related to the reinforcement types and percentages as well as to the processing parameters employed during synthesis. The present paper analyses the effect of microscopic and nanometric alumina particles, blended to pure aluminium in different combinations, on the final properties of metal matrix composites produced via SPS. A strong variation in the microstructural behaviour has been observed by varying the nano to micro alumina particles percentage blended with aluminium ones. 相似文献