Apertureless scanning near-field magneto-optical microscopy of magnetic multilayers

We imaged magnetic domains in Pt/Co/Pt multilayers using an apertureless scanning near-field optical microscope operating in reflection mode. As the magneto-optical effects are weak for this kind of structure, a polarization modulation technique with a photoelastic modulator was used to reveal the contrast between magnetic domains. In the case of a Pt/Co/Pt trilayer structure, a strong improvement in lateral resolution is observed compared with far-field magneto-optical images and good sensitivity is achieved. In the case of a Pt/[Co/Pt]Pt multilayer structure, stripe domains of 200 nm width could be resolved, in good agreement with images obtained by magnetic force microscopy on the same structure.     

Near-field magneto-optical analysis in reflection mode SNOM

Observation of magnetic domains with in-plane magnetisations is demonstrated by scanning near-field optical microscopy (SNOM) in reflection mode. The longitudinal and transverse magneto-optical Kerr effects are employed as the contrast mechanisms; these are observed as either a change in the polarisation of the reflected light or reflectance, depending on magnetisation direction. SNOM images of Co and Ni thin films show magneto-optical contrast depending on polarisation of the incident and detected light. For the smooth cobalt thin films, the orientation for magnetic domains is estimated, based on the correlation between the contrasts in SNOM images obtained in different polarisation configurations and the directions of the magnetic vectors of the incident and reflected light. For the nickel films with pronounced topographic structures, the resulting near-field polarisation dependencies are more complicated, suggesting that the magneto-optical contrast in SNOM images are affected by the topographic cross-talk due to the depolarisation effects on surface topographic features.     

Magneto-optical Kerr effect susceptometer for the analysis of magnetic domain wall dynamics

Domain wall dynamics in thin magnetic films with perpendicular and in-plane anisotropy is studied using a novel magneto-optical Kerr effect susceptometery method. The method allows for measurements of domain wall motion under ac field excitation and the analysis of dynamic modes as a function of driving frequency and magnetic field amplitude. Domain wall dynamics in the perpendicular anisotropy system, a Co/Pt multilayer, is characterized by thermally activated creep motion. For this dynamic mode, a polydispersivity exponent of β = 0.50 ± 0.03 is derived at small excitation energy, which is in excellent agreement with theoretical models. The dynamics of the other system, a Co wire with transverse uniaxial anisotropy, is dominated by viscous slide motion in a regular magnetic stripe pattern. Analytical expressions are derived for this magnetic configuration and by using these expressions, accurate values for the depinning field and the domain wall mobility are extracted from the susceptibility measurements.     

A combined surface stress and magneto-optical Kerr effect measurement setup for temperatures down to 30 K and in fields of up to 0.7 T

An optical 2-beam surface stress measurement and magneto-optical Kerr-effect has been combined with a liquid helium cooled cryostat. Sample temperatures down to 30?K and magnetic fields up to 0.7?T are achieved under UHV conditions. Low temperatures are exploited to obtain the first experimental data on the surface stress change induced by the adsorption of the noble gas Xe on Pt(111). High magnetic fields and low temperatures are used to characterize the magnetic properties of Co monolayers in longitudinal and polar Kerr geometries. The effective magnetic anisotropy is extracted from hard axis magnetization loops.     

Detection of micro gap weld using magneto-optical imaging during laser welding

Accurate seam tracking plays a critical role in acquisition of good weld. During laser butt joint welding, the laser beam focus must be controlled to follow the weld trajectory. The key problem to be solved is the automatic identification of weld position. An approach to detect the micro gap weld (gap width is less than 0.05 mm) based on magneto-optical imaging (MOI) is proposed. The laser butt joint welding of carbon steel was carried out. A magnetic excitation device was used to magnetize the weldment, and it was found that magnetic field distribution at the weld was different from other regions. The magnetized weldment was detected by using a magneto-optical sensor, and magneto-optical images of the weld were captured. By analyzing and processing weld MO images with low contrast and strong magnetic field noises, the weld center position could be detected accurately. Weld MO images at different laser welding speeds were investigated to analyze the varieties of image characteristics. Experimental results indicated that the magneto-optical imaging technique could be applied to detect the micro gap weld accurately, which provides a novel approach for automatic identification and tracking of micro gap weld during laser welding.     

Magneto-optical contrast in near-field optics

We propose a simple calculation of near-field magneto-optical (MO) images based on the beam propagation method. We calculate both Faraday rotation and circular dichroism contrasts of planar magnetic structures such as as-grown thin films and ion-irradiated samples. High-contrast near-field MO images are obtained, in good agreement with our experimental observations.     

Magneto-optical contrast in near-field optics

We propose a simple calculation of near-field magneto-optical (MO) images based on the beam propagation method. We calculate both Faraday rotation and circular dichroism contrasts of planar magnetic structures such as as-grown thin films and ion-irradiated samples. High-contrast near-field MO images are obtained, in good agreement with our experimental observations.     

MFM studies of interlayer exchange coupling in Co/Ru/Co films: Effect of Ru layer thickness

Antiferromagnetically coupled magnetic thin films are promising candidates for the design of new magnetic storage and logic devices. The ability to control the interlayer thickness, therefore the magnetic reversal response, of exchange-coupled magnetic layers is of paramount importance in nanotechnology, especially in magnetic sensing element design and applications. In this work, magnetic force microscopy (MFM) with improved sensitivity and high spatial resolution probes was used to obtain a more detailed view of magnetization reversal behavior and domain evolution in the indirect exchange-coupled trilayer system: Co/Ru/Co. The effect of the variable Ru interlayer thickness on the exchange coupling and thus the magnetic domain structure during the ferromagnetic (FM)/antiferromagnetic (AF) coupling transition in Co/Ru/Co films is well demonstrated. The MFM images display a distinct signature of AF coupling for the films with Ru thickness of 0.4 nm. MFM has proven to be an effective tool for detecting FM/AF interlayer coupling and exploring magnetic domain structures in exchange-coupled layered thin films.     

Off-axis electron holography of patterned magnetic nanostructures

Magnetization reversal processes in lithographically patterned magnetic elements that have lateral dimensions of 70–500 nm, thicknesses of 3–30 nm and a wide range of shapes and layer sequences have been followed in situ using off-axis electron holography in the transmission electron microscope. This technique allows domain structures within individual elements and the magnetic interactions between them to be quantified at close to the nanometre scale. The behaviour of 30 nm-thick Co elements was compared with that of 10 nm-thick Ni and Co elements, as well as with Co/Au/Ni trilayers. The hysteresis loops of individual elements were determined directly from the measured holographic phase images. The reproducibility of an element's domain structure in successive cycles was found to be affected by the out-of-plane component of the applied magnetic field and by the exact details of its initial magnetic state. Close proximity to adjacent elements led to strong intercell coupling, and remanent states with the in-plane magnetic field removed included domain structures such as solenoidal (vortex) states that were never observed during hysteresis cycling. Narrow rectangular bars reversed without the formation of end domains, whereas closely separated magnetic layers within individual elements were observed to couple to each other during field reversal.     

SPR谱仪的研制及在磁光复合薄膜测试中的应用

针对SPR增强磁光效应研究中复合金属薄膜结构的SPR激发测试,研制了一套角度扫描型SPR谱仪。通过巧妙的结构设计和运动控制,使得角度扫描过程中样品测试点始终处于棱镜底面样品基片的中心,保证了测试过程的一致性。对50nm金膜的重复性测验表明SPR谱仪具有较高的重复性和稳定度。利用搭建的SPR谱仪对磁光复合薄膜的测试结果表明,在制备的样品中,Au(15nm)/Co(5/10nm)/Au(5nm)复合结构是磁光等离子体系研究的最佳平台。     

Supported metal model catalyst surfaces examined by scanning tunnelling microscopy

Topographic and/or barrier-height images of ultrafine Pt and Au metal particles supported on a vacuum-deposited carbon film or titanium oxide thin films grown on titanium metal sheets were obtained. The topographic images of colloidal Au particles (5-nm diameter) adsorbed on a titanium oxide thin film showed a structure elongated in the direction normal to the x scan, indicating their weak interaction with the support surface. The topographic images of Pt vacuum-deposited on a carbon film showed c. 4-nm diameter particles, larger than those observed in electron microscopy. The problems inherent to the STM observation of such dispersed metal systems are identified. In the case of Pt particles vacuum-deposited on titanium oxide film, its barrier-height image gave better indication of different phases on the surface than its topographic image. The significance of obtaining barrier-height images along with topographic images for such sample systems is demonstrated.     

Application of a NDI method using magneto-optical film for micro-cracks

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.     

Evaluation of sample spin-polarization from spin-polarized scanning tunneling spectroscopy experiments

Spin-polarized scanning tunneling microscopy has produced a great amount of images presenting magnetic contrast between different magnetic domains with an unsurpassed spatial resolution but getting values like the surface polarization has proven to be a difficult task. We will discuss in detail how to extract this information for the case of manganese layers grown on Fe(001) whiskers. Mn layers adopt a body-centered-tetragonal (bct) structure when they are grown on the Fe(001) surface at room temperature. The Mn layers show an antiferromagnetic coupling between the layers. Comparing our spin-polarized scanning tunneling spectra measured with Fe-coated W tips with spin-resolved band structure calculations, we are able to find the value of the sample surface polarization. Also discussed is a method to change the tip magnetization. Finally, the magnetic structure around a screw dislocation on the surface is reviewed.     

Magnetic domain imaging of nano‐magnetic films using magnetic force microscopy with polar and longitudinally magnetized tips

Perpendicular or parallel magnetic fields are used to magnetize the tips used in magnetic force microscopy (MFM). In this process, perpendicular or parallel magnetic dipole moments are produced on the tip plane, thus leading to the formation of polar magnetized tips (PM‐tips) or longitudinally magnetized tips (LM‐tips), respectively. The resolution of an MFM image of a magneto‐optic disk is used for calibration of these tips, and the saturated magnetic fields of the PM‐ and LM‐tips are found to be 2720 Oe and 680 Oe, respectively. Because both tips can simultaneously magnetize the sample during the scanning process when measuring a Co thin film, clear MFM images are captured, which enable the identification of magnetizable regions and the distribution of the magnetic domains on the sample surface. These results will be useful for improving the manufacturing processes required for soft nano‐magnetic film production.     

High resolution polar Kerr magnetometer for nanomagnetism and nanospintronics

A new high resolution polar magneto-optical (MO) Kerr magnetometer, devoted to the study of nanometer sized elements with perpendicular magnetic anisotropy, is described. The unique performances of this setup in terms of sensitivity (1.2x10(-15) emu), stability (lateral drift +/-35 nm over 3 h), and resolution (laser spot full width at half maximum down to 470 nm) are demonstrated, and illustrated by Kerr hysteresis loop measurements on a unique ultrathin magnetic nanodot, and over small segments of ultranarrow magnetic tracks. Large scanning MO Kerr microscopy images were also obtained with the same performances.     

Scanning magneto-optical Kerr microscope with auto-balanced detection scheme

We have developed a scanning magneto-optical Kerr microscope dedicated to localization and measurement of the in-plane magnetization of ultra-thin layered magnetic nanostructures with high sensitivity and signal-to-noise ratio. The novel light detection scheme is based on a differential photodetector with automatic common mode noise rejection system with a high noise suppression up to 50 dB. The sensitivity of the developed detection scheme was tested by measurement of a single Co layer and a giant magnetoresistance (GMR) multilayer stack. The spatial resolution of the Kerr microscope was demonstrated by mapping an isolated 5×5 μm spin-valve pillar.     

A spectroscopic proton-exchange membrane fuel cell test setup allowing fluorescence x-ray absorption spectroscopy measurements during state-of-the-art cell tests

A test setup for membrane-electrode-assemblies (MEAs) of proton exchange membrane fuel cells which allows in situ fluorescence x-ray absorption spectroscopy studies of one electrode with safe exclusion of contributions from the counter electrode is described. Interference by the counter electrode is excluded by a geometry including a small angle of incidence (< 6°) between primary beam and electrode layer. The cell has been constructed by introducing just minor modifications to an electrochemical state-of-the-art MEA test setup, which ensures realistic electrochemical test conditions. This is at the expense of significant intensity losses in the path of the incident beam, which calls for the brilliance of third-generation synchrotrons to provide meaningful data. In measurements on Pt∕C and Pt-Co∕C cathodes combined with Pt-C anodes (H(2)/O(2) feed), good data quality was demonstrated both for the majority element Pt as well as for Co despite of a low areal Co density in the order of 0.02 mg/cm(2).     

Platinum/iridium/carbon: a high-resolution shadowing material for TEM,STM and SEM of biological macromolecular structures

Thin Pt/Ir/C coating films (1.5 nm) show a fine granularity and provide a high structural resolution in the transmission electron microscope (TEM) when applied to freeze-dried biological macromolecules. They keep their structure when exposed to atmospheric conditions, without the need of an additional stabilizing carbon layer, in contrast to conventional high-resolution shadowing materials such as Ta/W and Pt/C. However, the correct ratio of the components has turned out to be crucial. When evaporating Pt/Ir/C from the source electrode in an electron-beam-heated evaporator, the ratio of the three elements changes progressively, and, consequently, the properties of such films depend strongly on the mass that has been pre-evaporated. In this paper we present a quantitative analysis of the composition of Pt/Ir/C films by wavelength-dispersive X-ray analysis (WDX) undertaken in association with TEM experiments. We applied Pt/Ir/C shadowing to two regular biological test specimens, the phage T4 type III polyhead and the HPI-layer of Deinococcus radiodurans. It turns out that Pt/Ir/C films containing at least 25% C are three-dimensionally stable on the freeze-dried macromolecular samples. By the dramatically improved resolution power of the latest scanning electron microscopes (SEM) and the invention of the scanning tunnelling microscope (STM), two new surface-sensitive tools for the investigation of biological macromolecular structures became available. The Pt/Ir/C coating has proved to be well suited for STM and SEM imaging of freeze-dried biological structures because of its good electrical conductivity and its direct three-dimensional stability. We compare STM, SEM and TEM images of freeze-dried and Pt/Ir/C-coated polyheads.     

焊接缺陷磁光成像动态检测与识别

为了实现焊接缺陷的自动检测,研究一种交变磁场激励下焊缝表面及亚表面缺陷的磁光成像动态无损检测方法。分析了基于法拉第磁致旋光效应的焊接缺陷磁光成像机理,并结合交变磁场原理推导出励磁变化与动态磁光成像的关系。探索低碳钢板的亚表面焊缝磁光成像特征试验,验证了所提方法可用于检测焊缝亚表面的未熔合缺陷。最后对高强钢焊缝特征的动态磁光图像进行分析,采用主成分分析法和支持向量机(PCA-SVM)模式识别方法建立了焊接缺陷分类模型。试验结果表明,所提方法可以识别高强钢焊件中的焊缝特征(未熔透、裂纹、凹坑和无缺陷),缺陷分类模型的整体识别率达到92.6%,能够实现焊缝表面及亚表面缺陷的自动检测。