Numerical study of mixed convection flows in a square lid-driven cavity utilizing nanofluid

A numerical investigation of laminar mixed convection flows through a copper–water nanofluid in a square lid-driven cavity has been executed. In the present study, the top and bottom horizontal walls are insulated while the vertical walls are maintained at constant but different temperatures. The study has been carried out for the Rayleigh number 10⁴ to 10⁶, Reynolds number 1 to 100 and the solid volume fraction 0 to 0.05. The thermal conductivity and effective viscosity of nanofluid have been calculated by Patel and Brinkman models, respectively. The effects of solid volume fraction of nanofluids on hydrodynamic and thermal characteristics have been investigated and discussed. It is found that at the fixed Reynolds number, the solid concentration affects on the flow pattern and thermal behavior particularly for a higher Rayleigh number. In addition it is observed that the effect of solid concentration decreases by the increase of Reynolds number.     

A numerical study of mixed convection in a two-sided lid-driven tall cavity containing a heated triangular block for non-Newtonian power-law fluids

The study of hydrodynamics and thermal characteristics inside a lid-driven cavity has been one of the most captivating problems in computational fluid dynamics. In this numerical work, the mixed convection phenomenon inside a two-dimensional, tall lid-driven cavity with top and bottom lids moving in opposite directions, +x and –x, respectively, has been explored for non-Newtonian power-law fluids. The cavity contains a uniformly heated equilateral triangular obstacle at its geometric center.  Numerical experimentation is performed for a range of flow governing parameters, such as aspect ratio (0.25, 0.5, and 0.75), Prandtl number (1, 50, and 100) Richardson number (0.1, 1, and 10), power-law index (0.6–1.4) and Grashof number of 10⁴. The physical perceptions of the cavity are explained by using streamline and isotherm contours. The fluid movement is limited adjacent to the moving wall concerning the Richardson number at the lower Prandtl number. With a rise in the aspect ratio of the cavity, the flow-pattern becomes more dispersed inside the cavity. Heat transfer enhancement is observed at a lower aspect ratio equal to 0.25.     

Numerical study on the conjugate effect of joule heating and magnato-hydrodynamics mixed convection in an obstructed lid-driven square cavity

Conjugate effect of joule heating and magnetic force, acting normal to the left vertical wall of an obstructed lid-driven cavity saturated with an electrically conducting fluid have been investigated numerically. The cavity is heated from the right vertical wall isothermally. Temperature of the left vertical wall, which has constant flow speed, is lower than that of the right vertical wall. Horizontal walls of the cavity are adiabatic. The physical problem is represented mathematically by sets of governing equations and the developed mathematical model is solved by employing Galerkin weighted residual method of finite element formulation. To see the effects of the presence of an obstacle on magnetohydrodenamic mixed convection in the cavity, we considered the cases of with and without obstacle for different values of Ri varying in the range 0.0 to 5.0. Results are presented in terms of streamlines, isotherms, average Nusselt number at the hot wall and average fluid temperature in the cavity for the magnetic parameter, Ha and Joule heating parameter J. The results showed that the obstacle has significant effects on the flow field at the pure mixed convection region and on the thermal field at the pure forced convection region. It is also found that the parameters Ha and J have notable effect on flow fields; temperature distributions and heat transfer in the cavity. Numerical values of average Nusselt number for different values of the aforementioned parameters have been presented in tabular form.     

Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder

Mixed convection heat transfer in a lid-driven cavity along with a heated circular hollow cylinder positioned at the center of the cavity has been analyzed numerically. The present study simulates a realistic system such as air-cooled electronic equipment with a heat component or an oven with heater. A Galerkin weighted residual finite element method with a Newton–Raphson iterative algorithm is adopted to solve the governing equations. The computation is carried out for wide ranges of the Richardson numbers, cylinder diameter and solid fluid thermal conductivity ratio. Results are presented in the form of streamlines, isothermal lines, average Nusselt number at the heated surface and fluid temperature in the cavity for the mentioned parameters. It is found that the flow field and temperature distribution strongly depend on the cylinder diameter and also the solid–fluid thermal conductivity ratio at the three convective regimes.     

Combined convection heat transfer in a lid driven cavity filled with nanofluids

A simulation study is performed of laminar steady combined convection heat transfer in a lid-driven cavity containing various types of nanofluid (CuO–water nanofluid and Al₂O₃–water nanofluid) at various boundary conditions. The influence of two different types of temperature distributions applied to the cavity's bottom wall is investigated. There are two types of temperature distributions: constant temperature (T_h) and a sinusoidal temperature distribution applied to the bottom wall, which has a higher temperature than the top moving wall (T_c). In both circumstances, the sidewalls are kept adiabatic. The finite element method is utilized for the current issue. The influence of the Richardson number, which ranges from 0.01 to 10, and the volume fraction of nanoparticles, which ranges from 0 to 0.1, on the heat transfer rate has been explored. The influence of the sinusoidal temperature distribution's amplitude and phase angle is also examined. The isotherm and streamline patterns within the cavity are diverse with distinct nanoparticle volume fractions, and the Richardson numbers are presented and analyzed. The numerical findings showed that lowering the Richardson number raises the average Nusselt number. Also, the existence of nanoparticles in pure water increases heat transmission. Additionally, raising the sinusoidal temperature's amplitude increases the average Nusselt number. The results show that the increase of average Nusselt number at (φ = 0, Gr = 10⁴, Pr = 1, Ɣ = 3π/2) for amplitude 0.25, 0.5, 0.75, and 1 is 0.53, 0.9, 1.3, and 1.87, respectively.     

Numerical investigation of mixed convection of non-Newtonian fluid in a vented square cavity with fixed baffle

This paper numerically investigates mixed convective heat transfer in a vented square cavity incorporated with a baffle that is subjected to external non-Newtonian fluids (NNFs). Adiabatic conditions are imposed on the top and bottom walls, while cold temperature conditions are applied to the right and left solid boundaries. Heated NNF enters the cavity through the inlet and goes out through the outlet at three different locations, and it passes on a vertical baffle fixed at the base placed at different lengths. To examine the impact of the inlet and outlet positions, three different shapes of the outlet port located on the right wall and the inlet port on the left bottom wall were investigated. The impacts of Reynolds number (Re) of 100 ≤ Re ≤ 1000, Richardson number (Ri) of 0.1 ≤ Ri ≤ 3, power law index (n) of 0.6 ≤ n ≤ 1.4, length of baffle (L_b) of 0.2 ≤ L_b ≤ 0.6 and the outlet hole positions (S) of $0\le S\le 0.9$ on the thermal and flow distributions in the cavity are taken into consideration in this paper. The results demonstrated that the flow's intensity and heat transfer increase with improvement in the Re and n at any baffle length. When the Ri increased from 0.1 to 3, $N{u}_{\mathrm{avg}}$ increased by 23.3% at $n=0.6$, and 13.8% at $n=1.2$. Also, the Ri increment results in the augmentation of the average heat transfer.     

Natural convection and entropy generation in a square cavity

A natural convection in a square cavity finds considerable interest in thermal engineering applications. However, the use of entropy generation concept enables to identify the optimum conditions for its practical application. Consequently, in the present study, natural convection in a square cavity with differential top and bottom wall temperatures is investigated. A numerical scheme using the control volume approach is introduced when discretizing the governing flow and energy equations. The study is extended to include the analysis of the entropy in the cavity. It is found that the local rise of temperature occurs at the right bottom of the cavity due to vertical circulation developed in the cavity. The entropy generation amplifies when circulation along the x-axis increases and, the entropy generation becomes minimum for a particular Rayleigh number. © 1998 John Wiley & Sons, Ltd.     

Analysis of mixed convection in an inclined square cavity using nanofluids with Vajjha and Das' nanofluid model

In this article, the effects of angle of inclination on heat transfer by mixed convection have been analyzed numerically in a square cavity packed with a CuO nanofluid. Cavity boundaries are constructed by having sinusoidal varying temperature on sidewalls, inactive horizontal walls, and the hot passing plate at the center of the cavity. The transport equations for fluid and heat are solved using the finite-volume method with SIMPLE algorithm. The Richardson number (Ri) varying from 0.01 to 100, inclination angle (γ) from 0° to 90°, wall speed ratios (λ) from 0 to 3 and volume fraction of nanoparticles (φ) from 0.0 to 0.1 are given and represented in the form of flow fields, temperature fields, and mean heat transfer graphs. It is detected that the principal flow constraints have a substantial impact on the flow lines and thermal lines. Specifically, the structures of cavity inclination, existence of copper nanoparticles, and the hot wall in motion at the midpoint of the cavity are established to enrich the overall rate of heat transfer. Correspondingly, in the present study, the Vajjha and Das model is taken into account for the effective thermal conductivity and viscosity of the nanofluid; application of this model is beneficial for the industries working in a high-temperature environment.     

Numerical simulation of mixed convection flows in a square lid-driven cavity partially heated from below using nanofluid

The present numerical study deals with mixed convection in a square lid-driven cavity partially heated from below and filled with water-base nanofluid containing various volume fractions of Cu, Ag, Al₂O₃ and TiO₂. Finite difference method was employed to solve the dimensionless governing equations of the problem. The effects of governing parameters, namely, Reynolds number, solid volume fraction, different values of the heat source length and different locations of the heat source on the streamlines and isotherms contours as well as Nusselt number and average Nusselt number along the heat source were considered. The present results are validated by favorable comparisons with previously published results. The results of the problem are presented in graphical and tabular forms and discussed.     

Lattice Boltzmann simulation of MHD mixed convection in a two‐sided lid‐driven square cavity

In this paper the effects of a magnetic field on mixed convection flow in a two‐sided lid‐driven cavity have been analyzed by the lattice Boltzmann method (LBM). The Hartmann number varied from Ha = 0 to 100. The study has been conducted for different Richardson numbers (Ri) from 0.01 to 100 while the direction of the magnetic field was investigated in the x‐direction. Consequences demonstrate that the heat transfer augments with an increment of the Richardson number for different Hartmann numbers for two cases. The heat transfer declines with the growth of the magnetic field for various Richardson numbers for two cases. The difference between the values of heat transfer for the two cases at variant parameters is negligible but the trend of fluid flow for the two cases is multifarious. © 2011 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20402     

Unsteady MHD mixed convection flow of a micropolar fluid along an inclined stretching plate

In this research, the unsteady magnetohydrodynamic mixed convection flow of a micropolar fluid over an inclined plate has been investigated. The problem is reduced to a system of non‐dimensional partial differential equations, which are solved numerically using the implicit finite‐difference scheme. Velocity profiles, temperature profiles, concentration profiles, the skin friction coefficient, the rate of heat transfer, and the rate of mass transfer are computed numerically for various values of different physical parameters. In this study, we consider both assisting and opposing flow. It is found that in the assisting flow case, a solution could be obtained for all positive values of the buoyancy parameter λ, while in the opposing flow case the solution terminated at $\lambda = {\lambda _c}(\lambda < 0)$ . © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library (wileyonlinelibrary.com/journal/htj). DOI 10.1002/htj.21034     

MHD mixed convection in a lid-driven cavity with corner heater

Laminar mixed convection flow in the presence of magnetic field in a top sided lid-driven cavity heated by a corner heater was considered. The corner heater is under isothermal boundary conditions with different length in bottom and right vertical walls. Finite volume technique was used to solve governing equations. The temperature of the lid is lower than that of heater. The study is performed for different Grashof and Hartmann numbers at Re = 100. The obtained results showed some very interesting results.     

Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder

The objective of this paper is to numerically investigate the mixed convective flow and heat transfer controlled by a heated hollow cylinder inside an open cavity attached with a horizontal channel. All the boundaries of the channel and cavity are perfectly insulated while the inner surface of the cylinder is heated uniformly by heat flux q. The equations of conservation of mass, momentum, and energy were solved using adequate boundary conditions by Galarkin's weighted residual finite element technique. The solution has been performed in the computational domain as a whole with proper treatment at the solid/fluid interface. Computations have been conducted for Ra = 10³–10⁵, Prandtl number Pr varying from 0.7 to 7 and ratio of solid to fluid thermal conductivities from 0.2 to 50. Results are presented in terms of streamlines, isotherms, heat transfer rate in terms of the average Nusselt number (Nu_av), drag force (D), and maximum bulk temperature (θ_max). © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21002     

含加热圆管方腔内自然对流的数值研究

采用数值计算方法对含不同直径圆管以及相同直径圆管位置不同方腔内的层流自然对流进行了研究。以冷热壁面温度差为基准的瑞利数Rn为10^6,以圆管壁面热流密度为基准的Ra为10^8。计算结果表明,当圆管处于方腔中间位置时,随着圆管直径的增大,圆管表面局部努塞尔数呈减小趋势。当圆管直径不变时,由于在不同位置处浮力作用的强弱不同,随着圆管在方腔内位置的改变,方腔内流场结构和温度场分布也会发生变化。整个计算结果可为工程设计提供参考。     

Experimental and numerical studies on periodic convection flow and heat transfer in a lid-driven arc-shape cavity

This paper presents experimental and numerical studies on periodic convection flow and heat transfer in a lid-driven arc-shape cavity with temperature differential. Three cases were considered: Gr = 2 × 10⁵, 5 × 10⁵ and 1.2 × 10⁶ at Re = 100 (Gr = Grashof number; Re = Reynolds number). The mathematical model was proposed in our previous study. The current study performs an experiment to validate this model, to corroborate the existence of the periodic flow, and to more deeply probe the internal flow and temperature characteristics. The experimental setup primarily comprised an arc-shape cavity, a moving lid, a thermo-system, a smoke generator and an image acquisition system. The periodic convection flow in the cavity was visualized using kerosene smoke. The numerical and experimental results consistently reveal that the periodic flow pattern was observed in the case with Gr = 5 × 10⁵, whereas the steady-state flow pattern took place in the other two cases (Gr = 2 × 10⁵ and Gr = 1.2 × 10⁶). The numerical simulation produced reasonable and satisfactory agreement with the experiment for the periodic flow pattern and period. The difference between the predicted and measured periods is less than 5%. The transport properties, such as average kinetic energy, overall Nusselt number, stream function, phase space trajectory, local kinetic energy, velocity history and temperature distribution, were further analyzed and discussed in this paper. The proposed numerical simulation not only confirms the experimental observation, but also enhances the understanding of periodic convection in an arc-shape cavity subjected to a moving lid and temperature differential.     

Hydromagnetic effect on mixed convection in a lid-driven cavity with sinusoidal corrugated bottom surface

The present numerical simulation is conducted to analyze the mixed convection flow and heat transfer in a lid-driven cavity with sinusoidal wavy bottom surface in presence of transverse magnetic field. The enclosure is saturated with electrically conducting fluid. The cavity vertical walls are insulated while the wavy bottom surface is maintained at a uniform temperature higher than the top lid. In addition, the transport equations are solved by using the finite element formulation based on the Galerkin method of weighted residuals. The implications of Reynolds number (Re), Hartmann number (Ha) and number of undulations (λ) on the flow structure and heat transfer characteristics are investigated in detail while, Prandtl number (Pr) and Rayleigh number (Ra) are considered fixed. The trend of the local heat transfer is found to follow a wavy pattern. The results of this investigation illustrate that the average Nusselt number (Nu) at the heated surface increases with an increase of the number of waves as well as the Reynolds number, while decreases with increasing Hartmann number.     

开口方腔内混合对流换热的数值模拟

研究了两种不同外界来流方向的开口方腔内的混合对流换热问题。对不同的格拉晓夫数、R e以及纵横比进行了数值模拟。计算结果表明了与它们相对应的不同流型及换热效果,同时表明通过增加流速可以减小方腔与周围环境的热量交换。     

Effects of diameter ratio of adiabatic circular cylinder and tilt angle on natural convection from a square open tilted cavity

A numerical analysis is carried out to study the performance of natural convection inside a square open tilted cavity filled with air. An adiabatic circular solid cylinder is placed at the center of the cavity and the sidewall in front of the breathing space is heated by a constant heat flux. The top and bottom walls are kept at the ambient constant temperature. Two‐dimensional forms of Navier–Stokes equations along with the energy equations are solved using the Galerkin finite element method. Results are obtained for a range of Grashof numbers from 10³ to 10⁶ at Pr = 0.71 while the tilt angle varies from 0 to 45° and the diameter ratio of the cylinder is considered to be 0.2, 0.3, and 0.4 with constant physical properties. The parametric studies for a wide range of cylinder diameter ratios and cavity tilt angles show significant features of the present problem in terms of stream functions and temperature profiles. The computational results indicate that the heat transfer coefficient is strongly influenced by the above governing parameters. It is also found that the average Nusselt number decreases when the diameter ratio increases. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21001     

Magneto hydrodynamic buoyant convection of an electrically conducting fluid in a tilted square cavity

A numerical investigation of steady‐natural convection of an electrically conducting fluid, enclosed in a tilted square cavity, subjected to a uniform magnetic field applied perpendicular to the plane of cavity is presented. A comprehensive understanding of the effects of controlling parameters on the flow and heat transfer is delineated for a wide range of parameters. Correlations for the average Nusselt number are presented specifically for fluids with low Prandtl numbers pertaining to liquid metals. It is made known that when the applied magnetic field is perpendicular to the plane of the cavity, the magneto hydrodynamic drag is greatest as compared to any other direction of the applied magnetic field and consequently the suppression of convection is also at its maximum, irrespective of all other controlling parameters. 8 2010 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/htj.20326