Preparation and characterization of poly (ethylene glycol) grafted Ca-alginate fibers by γ-irradiation for biomedical applications

Radiation processing, being a physical process, is an environmentally friendly alternative to chemical modifications. It is economically viable, safe, and possesses several advantages over other conventional methods employed for modification and grafting. To improve the physico-mechanical properties of Ca-alginate fiber (CaAF), poly (ethylene glycol) (PEG) was grafted by applying γ-radiation of different intensities. The effect of γ-irradiation on the physico-mechanical, thermal, morphological, thermal and water aging, water, and simulated body fluid (SBF) uptake were evaluated. FT-IR results confirmed that PEG was successfully grafted onto Ca-alginate fibers by γ-irradiation. From the detailed experimental results, irradiation doses and PEG concentration were optimized for grafting processes. The results showed that 50% PEG and 2.5?kGy irradiation dose yielded the highest tensile strength. Differential scanning calorimetric (DSC) analysis showed that with increasing γ-intensity a decrease of dehydration temperature of the fibers had occurred. On the other hand, the glass transition temperature (T _g) increased with increasing irradiation dose. The tensile cracked surfaces of the grafted alginate fibers were analyzed by scanning electron microscope (SEM) in order to monitor their surface morphologies. The SEM images of the cracked surfaces demonstrated that spherical shape rods were present for irradiated fiber sample while no such rods were observed for non-irradiated fibers. The characteristic data obtained from SBF and water uptake, and water and thermal aging experiments indicated that CaAF grafted with 50% PEG by applying 2.5?kGy γ-irradiation can be potentially employed for biomedical purposes, such as surgical suture.     

Synthesis and characterization of a novel amphiphilic poly (ethylene glycol)–poly (ε-caprolactone) graft copolymers

A series of amphiphilic graft copolymers PEO-g-PCL with different poly (ε-caprolactone) (PCL) molecular weight were successfully synthesized by a combination of anionic ring-opening polymerization (AROP) and coordination-insertion ring-opening polymerization. The linear PEO was produced by AROP of ethylene oxide (EO) and ethoxyethyl glycidyl ether initiated by 2-(2-methoxyethoxy) ethoxide potassium, and the hydroxyl groups on the backbone were deprotected after hydrolysis. The ring-opening polymerization of CL was initiated using the linear poly (ethylene oxide) (PEO) with hydroxyl group on repeated monomer as macroinitiator and Sn(Oct)₂ as catalyst, then amphiphilic graft copolymers PEO-g-PCL were obtained. By changing the ratio of monomer and macroinitiator, a series of PEO-g-PCL with well-defined structure, molecular weight control, and narrow molecular weight distribution were prepared. The expected intermediates and final products were confirmed by ¹H NMR and GPC analyzes. In addition, these amphiphilic graft copolymers could form spherical aggregates in aqueous solution by self-assemble, which were characterized by transmission electron microscopy, and the critical micelle concentration values of graft copolymers PEO-g-PCL were also examined in this article.     

Different real-time degradation scenarios of functionalized poly(ε-caprolactone) for biomedical applications

Anterior cruciate ligament (ACL) ruptures are a much-commented injury as it can end the season or even career of professional athletes. However, the recovery of a patient from the general population is no less painful during the long period required by current treatments. Artificial ligaments could improve this healing, yet, orthopedic surgeons are still cautious about permanent ACL implants. Therefore, combining biodegradation and bioactivity could be a key feature for the popularization of these devices. This study aim at evaluating the real-time degradation of poly(ε-caprolactone) (PCL) grafted with the bioactive polymer sodium polystyrene sulfonate in different scenarios. PCL physical–chemical properties were evaluated before and after degradation. In addition, in vitro experiments were realized to confirm the long term influence of the grafting on cell response. Altogether, we were able to show different degradations scenarios, enabling to study the impact of degradation environment on degradation mode and rate of functionalized PCL.     

Synthesis and characterization of polymers from β-propiolactone and poly(ethylene glycol)s

Uncatalysed polymerizations of β-propiolactone with low-molecular-weight poly(ethylene glycol)s were carried out in bulk, at temperatures in the range of 70 to 120°C. ¹H nuclear magnetic resonance (n.m.r.) and differential scanning calorimetry (d.s.c.) measurements on the resulting products indicated a block copolymer structure. Gel permeation chromatography (g.p.c.) and d.s.c. analyses showed that in some cases the copolymerization is accompanied by homopolymerization of β-propiolactone, probably due to the presence of residual water in the poly(ethylene glycol). N.m.r. and infra-red (i.r.) spectra of copolymers revealed the presence of hydroxyl and carboxyl end groups. The copolymerization reaction may be visualized as a two-step process, in which the ring opening of β-propiolactone takes place on both the hydroxyl groups of poly(ethylene glycol), followed by repetitive monomer addition forming an ester-ether-ester triblock copolymer.     

Double stimuli responsive mixed aggregates from poly(acrylic acid)-block-poly(ε-caprolactone)-block-poly(acrylic acid) and poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) triblock copolymers

Well defined ABA triblock copolymer comprising a biodegradable poly(ε-caprolactone) (PCL) middle block and two pH responsive poly(acrylic acid) (PAA) outer blocks was synthesized by atom transfer radical polymerization of tert-butyl acrylate, initiated by PCL-based macroinitiator, followed by selective hydrolysis of the poly(tert-butyl acrylate) blocks. The cooperative self-assembly of the synthesized poly(acrylic acid)-block-poly(ε-caprolactone)-block-poly(acrylic acid) (PAA₂₂PCL₂₆PAA₂₂) copolymer with a temperature-responsive poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO₂₆PPO₄₀PEO₂₆, Pluronic P85) triblock copolymer at different compositions in aqueous media was investigated. Based on experimental data, copolymer properties and composition, formation of nano-sized aggregates comprising a mixed PCL/PPO core and a mixed PEO/PAA corona is suggested. The binary mixture of PAA₂₂PCL₂₆PAA₂₂:PEO₂₆PPO₄₀PEO₂₆ copolymers at molar ratio 3:1 favors the formation of mixed aggregates only, while at higher PEO₂₆PPO₄₀PEO₂₆ content the aggregates coexist with pure PEO₂₆PPO₄₀PEO₂₆ micelles.     

Gold nanoparticle conjugated poly(p-phenylene-β-cyclodextrin)-graft-poly(ethylene glycol) for theranostic applications

Fluorescent conjugated polymers gained interest in the last decades for both imaging and targeting tumor cells for the purpose of diagnosis and treatment of cancer. In the light of this objective conjugated poly(p-phenylene) possessing β-cyclodextrin (β-CD) units in the main chain and poly(ethylene glycol) side chains is used as an imaging and therapeutic agent to target U87 and Vero cells. Additionally, imaging quality and therapy efficiency of the bare graft copolymer and its gold nanoparticle (AuNP) conjugated form were investigated and compared. It is observed that β-CD is effective not only for the imaging of the tumor cells, but also as a radiotherapy agent. Conjugation of the polymer with the AuNPs provides significant improvement in the therapeutic efficiency. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47250.     

Preparation of methoxy poly (ethyleneglycol)-b-poly (ε-caprolactone-co-L-lactide) and characterization as biodegradable micelles

Polynorbornene-functionalized multiwalled carbon nanotubes (MWCNTs) were prepared by a “grafting from” approach, on varying the catalyst-MWCNT spacing to evaluate the influence of the starting catalyst-MWCNT distance on the polymerization efficiency. In particular, 2nd generation Grubbs catalysts and Hoveyda-Grubbs catalysts, both active in the ring opening metathesis polymerization of olefins, were grafted on MWCNTs at 8 to 12 atom spacing from the nanotube surface, and the activity of initiators was tested in the 2-norbornene polymerization. According to our results, initiator performances depend (i) on the length of the arm connecting the catalyst to the MWCNTs, being initiators with longer arms more efficient, and (ii) on the class of Ru catalysts, being Hoveyda-Grubbs catalysts surprisingly more active at room temperatures than 2nd generation Grubbs catalysts. High fractions (80–95 wt%) of polymer covalently bound to the nanotubes in the MWCNT-grafted polynobornene obtained composites were achieved.     

Biodegradable nanoparticles of methoxy poly(ethylene glycol)-b-poly( d, l-lactide)/methoxy poly(ethylene glycol)- b-poly(ϵ-caprolactone) blends for drug delivery

The effects of blend weight ratio and polyester block length of methoxy poly(ethylene glycol)-b-poly( d, l-lactide) (MPEG- b-PDLL)/methoxy poly(ethylene glycol)- b-poly(ϵ-caprolactone) (MPEG- b-PCL) blends on nanoparticle characteristics and drug release behaviors were evaluated. The blend nanoparticles were prepared by nanoprecipitation method for controlled release of a poorly water-soluble model drug, indomethacin. The drug-loaded nanoparticles were nearly spherical in shape. The particle size and drug loading efficiency slightly decreased with increasing MPEG- b-PCL blend weight ratio. Two distinct thermal decomposition steps from thermogravimetric analysis suggested different blend weight ratios. Thermal transition changes from differential scanning calorimetry revealed miscible blending between MPEG- b-PDLL and MPEG- b-PCL in an amorphous phase. An in vitro drug release study demonstrated that the drug release behaviors depended upon the PDLL block length and the blend weight ratios but not on PCL block length.     

Photo- and bio-degradation of poly(ester-urethane)s films based on poly[(R)-3-Hydroxybutyrate] and poly(ε-Caprolactone) blocks

Biodegradable segmented poly(ester-urethane)s derived from telechelic dihydroxy-poly[(R)-3-hydroxybutyrate], acting as hard segments, and poly(ε-caprolactone)-diols, acting as soft segments, using 1,6-hexamethylene diisocyanate, as non toxic connecting agent, were synthesized. The copolymers were characterized with regard to their molecular weight by GPC and their main thermal transitions by DSC. These copolymers as well as PHB were exposed to UV-irradiation for different time intervals and the changes in the chemical structure were analyzed by FTIR spectroscopy. Under our experimental conditions, it was found that the increase of irradiation time was accompanied by increase of the proportion of the gel fraction and the decrease of the intrinsic viscosity of the soluble fraction of the investigated copolymers. The biodegradability of PHB and poly(ester-urethane) sample containing ~40 wt% PHB before and after UV-irradiation was investigated under soil burial. The results showed that the photolysis in air prior to biodegradation increased the rate of degradation.     

Preparation of curcumin loaded poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) nanofibers and their in vitro antitumor activity against Glioma 9L cells

The purpose of this work was to develop implantable curcumin-loaded poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL, PCEC) nanofibers, which might have potential application in cancer therapy. Curcumin was incorporated into biodegradable PCEC nanofibers by electrospinning method. The surface morphology of the composite nanofibers was characterized on Scanning Electron Microscope (SEM). The average diameter of the nanofibers was 2.3-4.5μm. In vitro release behavior of curcumin from the fiber mats was also studied in detail. The in vitro cytotoxicity assay showed that the PCEC fibers themselves did not affect the growth of rat Glioma 9L cells. Antitumor activity of the curcumin-loaded fibers against the cells was kept over the whole experiment process, while the antitumor activity of pure curcumin disappeared within 48 h. These results strongly suggested that the curcumin/PCEC composite nanofibers might have potential application for postoperative chemotherapy of brain cancers.     

Mixed micelles from methoxy poly(ethylene glycol)–polylactide and methoxy poly(ethylene glycol)–poly(sebacic anhydride) copolymers as drug carriers

mPEG–PLLA (poly l-lactic acid) is synthesized by ring-opening polymerization of lactide and conjugation with mPEG. Sebacic acid is modified with acetic anhydride and condensed with mPEG to form mPEG–PSA (poly sebacic anhydride). The micelles formed by mPEG–PLLA are characterized by slow degradation and low drug encapsulation efficiency; on the contrary, mPEG–PSA micelles are characterized by rapid degradation but high encapsulation efficiency. They can merge into spherical micelles (Φ = 140 nm) by self-assembly in water. The mixed micelles can successfully encapsulate a typical hydrophobic drug (curcumin), and significantly improve its solubility. Experimental results show that the mixed micelles have the features of high encapsulation efficiency and slow degradation.     

Synthesis and characterization of cellulose nanowhisker-reinforced-poly(ε-caprolactone) scaffold for tissue-engineering applications

Poly(ε-caprolactone) (PCL) is a bioresorbable and biocompatible polymer with assorted medical applications. However, remarkable hydrophobicity and nonosteoconductivity have stood as a barrier to limit its applications. The present study aims to modify the bulk characteristics of PCL to develop a polymeric scaffold with adequate structural and mechanical properties to support regenerated tissues. For this purpose, functionalized bacterial cellulose nanowhiskers (BCNW-g-βCD-PCL₂₀₀₀) are synthesized. Reinforcing PCL matrix with 4 wt % of the nanowhiskers resulted in a bionanocomposite with promoted bulk properties. Compared to neat PCL, the obtained bionanocomposite shows improvements of 115 and 51% in tensile strength and Young's modulus, respectively; 20% increase in hydrophilicity; 7% increase in degradation rate; and 6% decrease in crystallinity. Gas foaming/combined particulate leaching technique is used to develop highly porous structures of 86–95% porosity with interconnected macropores of mean pore diameters of 250–420 μm. Porous scaffolds showed compression modulus values of 5.3–9.1 MPa and would have promising applications in regenerative medicine. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48481.     

Amphiphilic biodegradable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) triblock copolymers: synthesis, characterization and their use as drug carriers for folic acid

Amphiphilic biodegradable poly(ε-caprolactone)-poly(ethylene glycol)-poly (ε-caprolactone) (PCEC) triblock copolymers have been successfully synthesized by the ring-opening polymerization of ε-caprolactone (ε-CL) employing SnOct as catalyst and double-hydroxyl capped PEG (DHPEG) as macro-initiator. The triblock structure and copolymer composition were conformed by FT-IR, ¹H-NMR, and GPC. Using a membrane dialysis method, PCEC micelles were prepared with a core–shell type. The critical micelle concentration (CMC) of PCEC triblock copolymers was determined by fluorescence technique using pyrene as probe, and CMC values decreased with the increase of PCL chain length. From the observation of transmission electron microscopy (TEM), the morphology of polymer micelles was spherical in shape. Micelles size measured by dynamic light scattering (DLS) exhibited a narrow size distribution. Folic acid (FA) was then used as a model drug to incorporate into PCEC micelles. The diameter, drug loading, and drug release rate of PCEC micelles were influenced by the feed weight ratio of FA and copolymer, and polymer composition. In addition, in vitro release experiments of the drug-loaded PCEC micelles exhibited sustained release behavior without any burst effects and the release behavior was also affected by the pH of release media.     

Enhanced therapeutic efficacy of clotrimazole by delivery through poly(ethylene oxide)-block-poly(ε-caprolactone) copolymer-based micelles

Amphiphilic block copolymers have been the subject of great scientific interests due to their applications in various fields including nano drug delivery. Three amphiphilic block copolymers based on poly(ε-caprolactone) as a hydrophobic segment and methoxy poly(ethylene oxide) ( as a hydrophilic part were synthesized by the ring-opening polymerization of ε-caprolactone using MeO-PEO_5K as macroinitiator by varying initial feed ratios. The synthesized polymers were further explored for their drug delivery potential using clotrimazole as model hydrophobic drug. Drug-loaded micelles were characterized for shape, size, drug encapsulation efficiency, in vitro release, and thermal stability using atomic force microscope, zetasizer, UV–visible spectrophotometry, FTIR, differential scanning calorimetry, and thermogravimetric analysis. Clotrimazole loaded in micelles were also investigated for its antifungal activity through an in vitro assay and scanning electron microscopy. The antifungal activity of drug increased significantly by delivering through polymeric micelles. Current study provides insight into different factors that can be maneuvered to achieve a variety of desired properties of micelles for improved therapeutic efficacy of drugs like clotrimazole. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47769.     

Advance application of Raman spectroscopy for quantitative analysis of noncrystalline components in thin films of poly(ε-caprolactone)/poly(butadiene) blends

A quantitative analysis method for the distribution of noncrystalline poly(butadiene) component in poly(ε-caprolactone)/poly(butadiene) (PCL/PB) binary blends have been analyzed by advance application of Raman spectroscopy, optical microscopy, and differential scanning calorimetry (DSC) techniques. Thin films of different compositions of PCL/PB binary blends were prepared from solution and isothermally crystallized at a certain temperature. After calibration with real data, quantitative analyses by Raman spectroscopy revealed the amorphous PB are trapped inside the PCL crystals. Polarized optical microscopy and real time atomic force microscopy were used to collect data for the crystal morphology and crystal growth rate. For pure PCL crystals, a morphology of truncated lozenge shape was observed, independent of crystallization temperature and regardless of the blends compositions. For the pure PCL and their blends, almost unique crystal growth rate was found. The miscibility behaviors using DSC were drawn through melting point depression method. The Hoffman-Weeks extrapolations of the blends were found to be linear and identical with those of the neat PCL. The interaction parameter for the blends indicating that the PCL and PB blends have no intermolecular interaction, confirming the blends are immiscible. Despite the immiscibility of the blend, the PCL crystals do not bend during the growth process and do not reduce the growth rate as they do for miscible blend systems.     

Effect of silicone dioxide and poly(ethylene glycol) on the conductivity and relaxation dynamics of poly(ethylene oxide)–silver triflate solid polymer electrolyte

The conducting and relaxation dynamics of Ag⁺ ions in poly(ethylene oxide) (PEO)–silver triflate (AgCF₃SO₃) solid polymer electrolytes (SPEs) containing nanosize SiO₂ filler and poly(ethylene glycol) (PEG) as a plasticizer were studied in the frequency range 10 Hz to 10 MHz and in the temperature range 303–328 K. The comparatively lower conductivity of the plasticized (PEG) PEO–AgCF₃SO₃–SiO₂ nanocomposite electrolyte system was examined by analysis of the Fourier transform infrared (FTIR) spectroscopy and conductivity data. The electric modulus (M″) properties of the SPE systems were investigated. A shift of the M″ peak spectra with frequency was found to depend on the translation ion dynamics and the conductivity relaxation of the mobile ions. The value of the conductivity relaxation time was observed to be lower for the PEO–AgCF₃SO₃ system only with nanofiller SiO₂. The scaling behavior of the M″ spectra showed that the dynamical relaxation processes was temperature-independent in the PEO–AgCF₃SO₃ and PEO–AgCF₃SO₃–SiO₂–PEG polymer systems, whereas they were temperature-dependent for the PEO–AgCF₃SO₃–SiO₂ system. However, the relaxation processes of all of theses systems were found to be dependent on their respective compositions. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The crystallization behavior of poly(ethylene glycol)-poly(ε-caprolactone) diblock copolymers with asymmetric block compositions

Crystallization behavior, structural development and morphology evolution of a series of poly (ethylene glycol)-poly(ε-caprolactone) diblock copolymers (PEG-b-PCL) were investigated via differential scanning calorimetry (DSC), X-ray diffraction (XRD) and atomic force microscopy (AFM). In these copolymers, both blocks were crystallizable and biocompatible. The mutual effects between the PEG and PCL blocks were significant, leading to the obvious block composition dependence of the crystallization behavior and morphology of the PEG-b-PCL copolymers. The relative block length determined which block crystallized first. The temperature-dependent XRD measurements confirmed which block crystallized first from the copolymer during the cooling procedure. Single crystals of the PCL and PEG homopolymers and the PEG-b-PCL copolymers were obtained and observed by AFM. The block (PCL or PEG) crystallized first would determine the crystal morphology. The block crystallized later acted as a solvent, which was advantageous to forming perfect single crystals of the whole block copolymers.     

Processing and characterization of elastomeric polycaprolactone triol–citrate coatings for biomedical applications

In this paper we describe the synthesis, processing and characterization of a novel elastic polyester coating created by carrying out catalyst-free polyesterification between biocompatible and non-toxic multifunctional reactants, namely polycaprolactone triol and citric acid. The physico-chemical and surface properties of the resulting polyester coatings and films have been investigated. This new material has been characterized by matrix-assisted laser desorption time-of-flight mass spectrometry (MALDI-ToF-MS), nuclear magnetic resonance spectroscopy (NMR), Fourier-transform infra-red spectroscopy (FTIR), water-in-air contact angle measurements, scanning electron microscopy (SEM), thermal analysis (DSC), mechanical tests and swelling experiments. The polymer structure, surface properties (morphology and chemistry), mechanical integrity and hydration of the elastomer can be controlled by simple variation of the initial citric acid concentration in the polymer formation. This feature of the novel polyester material presents a significant development in the production of advanced coatings for biomedical applications.