A simple green synthesis of (Z)-5-arylmethylene-4- thioxothiazolidines and thiopyrano[2,3-d]thiazolidine-2-thiones in PEG-400 under catalyst-free conditions

An improved Knoevenagel condensation of various aromatic aldehydes with thiazolidine-2,4-dithione and with 4-thioxothiazolidin-4-one can be achieved at room temperature in polyethylene glycol-400 without catalyst to afford (Z)-5-arylmethylene-4-thioxothiazolidine derivatives 3a–3o. Also, the [4+2] cyloaddition reaction of 3a–3g with N-phenylmaleimide 4 gave the cycloadducts 5a–5g under the same reactions conditions. The structure of all the newly synthesized compounds was established on the basis of the elemental analysis and spectral data. This process is a simple, efficient, economical, and environmentally benign compared to classical reactions.     

Facile synthesis and characterization of novel bis(2-S-alkylpyridines) and bis(3-aminothieno[2,3-b]pyridines) incorporating 1,3-diarylpyrazole moiety

3-(4-Hydroxyphenyl)-1-phenyl-1H-pyrazole-4-carbaldehyde (1) is condensed with acetophenone to afford the corresponding unsaturated carbonyl compound 4 whose potassium salt is reacted with 1,4-dibromobutane to afford the bis-unsaturated carbonyl compound 3. Both carbonyl compounds 3 and 4 are reacted with 2-cyanoethanethioamide, through Michael addition reaction followed by cyclocondensation, to prepare the starting materials bis(pyridine-2(1H)-thione) derivative 5 and pyridine-2(1H)-thione derivative 8. Two synthetic routes to synthesize the target materials 7 and 14 are described to get the most efficient method for preparation and maximum yield%. The first route came from the direct alkylation of the bis(pyridine-2(1H)-thione) derivative 5 using iodomethane (6a) and benzyl chloride (6b) to afford the corresponding bis(2-S-alkylpyridine) derivatives 7a,b. The reaction of 5 with halo-containing compounds 10a–d to synthesize the target materials bis(3-aminothieno[2,3-b]pyridine) derivatives 14a–d failed under various reaction conditions. The second route involves the reaction of pyridine-2(1H)-thione derivative 8 with 6a,b and 10a–d to afford the corresponding 2-S-alkylpyridine derivatives 9a,b and 3-aminothieno[2,3-b]pyridine derivatives 13a–d, through the formation of 2-S-alkylpyridine derivatives 12a–d followed by a Thrope-Ziegler reaction, whose potassium salts reacted with 1,4-dibromobutane to afford the corresponding target materials 7a,b and 14a–d, respectively. The structures of target molecules were elucidated using elemental analyses and spectral data.     

Synthesis and derivatization of angular 3-chloro-3-chlorosulfenyl naphtho[1,2-b]pyran(4H)-4-ones with evaluation of antiviral activity

Angular 2,3-dihydronaphtho[1,2-b]pyran(4H)-4-ones 1a,b react with an excess of thionyl chloride to give the α-chlorosulfenyl chlorides 2a,b, which are reduced by iodide ion to give the corresponding 1,3,4-oxadithiino derivatives 3a,b. However, the aducts 4a,b and 5a,b were obtained by reduced 2a,b with iodide ion in the presence of 2,3-dimethyl-1,3-butadiene and 1,3-cyclohexadiene, respectively. Direct oxidation of 2a,b afford 3,3-dichloronaphthopyran-4-ones 6a,b, whilst conversion to the sulfenamides 7a,b prior to oxidation provides 3-chloronaphthopyranones 8a,b. While α-chloro β-oxo sulfenyl chlorides 2a,b undergo straight forward substitution with 1-methylpiperazine and with potassium cyanide to give 9a,b and 10a,b, respectively. Some of the prepared products were selected and tested for their antiviral activity against herpes simplex virus type-1 (HSV-1). Plaque reduction infectivity assay was used to determine virus count reduction as a result of treatment with test compounds. Compound 5a showed moderate effect against HSV-1.     

A simple and versatile protocol for the preparation of functionalized heterocycles utilizing 4-benzoyl-5-phenylamino-2,3-dihydrothiophene-2,3-dione

The reaction of ethyl benzoylpyruvate with phenyl isothiocyanate in alkaline medium yields 4-benzoyl-5-phenylamino-2,3-dihydrothiophene-2,3-dione (1). Reaction of the intermediate 1 with primary aromatic amines such as aniline derivatives, benzidine and secondary aliphatic amines, namely diethylamine, piperidine, morpholine and piperazine afforded the corresponding thiophene 2a–2g and amide 3a–3d derivatives. Compound 1 reacts with N,N′- and N,O-dinucleophiles such as 1,2-diaminoalkanes, 2-aminoethanol, 1-aminoguanidine, guanidine, urea, 1,2-phenylenediamine and 2-amino-4-methylphenol to form the heterocylic compounds 4–10.     

Pyridine-2(1H)-thione in heterocyclic synthesis: synthesis and antimicrobial activity of some new thio-substituted ethyl nicotinate,thieno[2,3-b]pyridine and pyridothienopyrimidine derivatives

3-(4-Bromophenyl)-2-cyanoprop-2-enethioamide (1) reacted with ethyl 3-oxo-3-phenylpropanoate (2) to give ethyl 4-(4-bromophenyl)-5-cyano-2-phenyl-6-thioxo-1,6-dihydropyridine-3-carboxylate (3). Compound 3 was taken as a starting material for the synthesis of thio-substituted ethyl nicotinate derivatives 5a–d, which underwent cyclization to the corresponding thieno[2,3-b]pyridines 6a–d. Also 3 reacted with hydrazine hydrate to give the pyrazolo[3,4-b]pyridine derivative 7, which upon diazotization gave the diazonium derivative 8. Compound 6a condensed with dimethylformamide–dimethylacetal to afford thieno[2,3-b]pyridine derivative 9, which reacted with different amines 10a–e to afford the pyridothienopyrimidine derivatives 12a–e through the Dimroth rearrangement. Moreover, compound 6a reacted with different reagents to give pyridothienopyrimidine derivatives 14a and b, 17 and pyrazolothienopyridine derivative 18. In addition, acetylating compound 6c with chloroacetylchloride afforded the 3-[(2)-chloroacetylamino]thieno[2,3-b]pyridine derivative 20, which upon cyclization yielded the corresponding 2-chloromethylpyrido[3′,2′:4,5]thieno[3,2-d]pyrimidine derivative 21. Some of the newly synthesized compounds were screened in vitro for their antimicrobial activities.

     

An efficient microwave-assisted synthesis of thieno[2,3- b ]quinolines under solvent-free conditions

A novel and efficient method for the synthesis of substituted thieno[2,3-b]quinolines has been developed. A simple one-pot reaction of 3-formyl-2-mercaptoquinolines 2a–l with 1-chloroacetone, 2-chloroacetamide, ethyl chloroacetate and 2-chloro-1-phenylethanone in presence of catalytic amount of potassium carbonate under microwave irradiation and solvent-free conditions gave thieno[2,3-b]quinolin-2-ylethanone derivatives 3a–e, thieno[2,3-b]quinoline-2-carboxamide derivatives 4a–e, ethyl thieno[2,3-b]quinoline-2-carboxylate 5a–e and phenyl(thieno[2,3-b]quinolin-2-yl)methanone derivatives 6a–e compounds respectively. The structures of all the newly synthesised compounds were elucidated on the basis of elemental analysis, IR, ¹H NMR and mass spectral data.     

Bis-(cyanoacetamide)alkanes in heterocyclic synthesis: synthesis of bis-heteryl(carboxymido)alkanes and bis-(heteryl)alkanes of thiophene,pyrrole, thiazole and pyrimidinone series

Bis-N-substituted cyanoacetamides 3a and b reacted with active methylene-containing compounds 2a–c and elemental sulfur to give bis-thiophene 4a and b and bis-pyrrole 6a and b derivatives. Compounds 4a and b reacted with ethyl cyanoacetate 2a to afford bis-thienopyrimidine derivatives 5a and b; on the other hand, 6a and b reacted with cyanothioacetamide 2c to give the corresponding bis-thioxopyrrolopyrimidine derivatives 7a and b. Compounds 7a and b reacted with methyl iodide to give the corresponding bis-2-S-methylpyrrolopyrimidine derivatives 8a and b, which could be, in turn, cyclized into the bis-pyrazolopyrrolopyrimidine derivatives 9a and b by refluxing with hydrazine hydrate. On the other hand, 7a and b reacted with ethyl chloroacetate to yield the corresponding bis-thienopyrrolopyrimidine derivatives 10a and b. Finally, compounds 3a and b reacted with phenylisothiocyanate and elemental sulfur to give the corresponding bis-2-thioxoaminothizole derivatives 11a and b.     

Synthesis and gas permeability of poly(<Emphasis Type="Italic">p</Emphasis>-phenyleneethynylene)s having bulky alkoxy or alkyl groups

Dipropynylbenzene with branched alkoxy and alkyl groups [CH₃C≡CRC₆H₂RC≡CCH₃, R = 2-methylpropoxy (1a), 3-methylbutoxy (1b), 4-methylpentoxy (1c), cyclohexylmethoxy (1d), 2-ethylhexoxy (1e), 2-octoxy (1f), 2-ethylhexyl (1g), and 2-octyl (1h)] were polymerized with Mo(CO)₆ in the presence of 4-(trifluoromethyl)phenyl to afford poly(2,5-di(alkoxy or alkyl)-p-phenyleneethynylene)s (2a–h). Polymer 2a was insoluble in any solvents, but the other polymers (2b–h) were soluble in common organic solvents. The polymers with relatively long side chains (2e–h) had high molecular weight over 1.6 × 10⁴ and gave free-standing membranes by solution-casting method. The densities of membranes of 2e–h were 0.914–0.998, and their fractional-free volume values were relatively large (0.094–0.158). The oxygen permeability coefficients of membranes of 2e–h were 18.4, 12.7, 4.85, and 19.3 barrers, respectively. It was found that poly(p-phenyleneethynylene) with 2-octyl side groups, which have the branch at the nearest position from main chain, exhibited the highest gas permeability.     

Addition of alkyllithiums to 3H-quinazoline-4-thione and various substituted quinazoline derivatives; application in synthesis

Reaction of 3H-quinazoline-4-thione (1) with two mole equivalents of an alkyllithium (t-BuLi, n-BuLi or MeLi) at?78 ^°C in dry THF gave the corresponding 2-alkyl-1,2-dihydro-3H-quinazoline-4-thione (4, 5 or 6) in high yield. Similarly, reactions of 4-(methylthio)quinazoline (7), 4-(ethylthio)quinazoline (8) and 4-methoxyquinazoline (9) with alkyllithiums (one mole equivalent) gave the corresponding 4-substitued 2-alkyl-1,2-dihydroquinazolines 11–18. On the other hand, blocking position 2 with a phenyl group in 4-(methylthio)-2-phenylquinazoline (20) and 4-methoxy-2-phenylquinazoline (21) resulted in reaction with two mole equivalents of alkyllithiums to give 4,4-dialkyl-2-phenyl-3,4-dihydroquinazolines 22–24.     

β-Aminocrotononitrile in heterocyclic synthesis: Synthesis of polysubstituted pyridines as precursors to bicycles and polycycles

β-aminocrotononitrile (1) reacted with either cyanothioacetamide to give (3) or malononitrile to afford an anion (5). Pyridine-2(1H)-thione (4) was obtained by boiling of (3) in ethanol and Et ₃N or treatment of (5) with H ₂S, respectively. The reaction of anion 5 with isothiocyanates (6) gave N-substituted pyridine-2(1H)-thiones (7). N-Substituted pyridine-2(1H)-thiones (7) can be used for the preparation of pyrido[2,3-d]pyrimidines (8a–e) and (10a–e), or the preparation of pyrido[1,2-a]pyrimidines (12a–d). 1,8-Naphthyridine derivatives (14a–d) and (16a–e) can also be obtained from pyridine-2(1H)-thione (7). Finally, 1,8-naphthyridine derivatives (16a–e) can be used for the preparation of tetracyclic compounds 17a–c and 18a,b.     

Facile and clean electrochemical synthesis of new acetaminophen derivatives through electrochemical oxidation of acetaminophen in the presence of thiouracil derivatives

The electrochemical oxidation of acetaminophen (1a) is carried out in the presence of thiouracil derivatives (3a–c), as nucleophiles, in an acetate buffer solution (0.15?M, pH 5) mixed with Dimethylformamide (DMF) using cyclic voltammetry and coulometry under a constant potential. The results obtained indicate that N-acetyl-p-benzoquinone-imine derived from acetaminophen participates in a 1,4-Michael-type addition reaction with thiouracils to form the corresponding acetaminophen derivatives (4a–c) in good yields and with high purities using a facile, catalyst-free, and one-pot electrochemical method using three carbon electrodes in an undivided cell under mild conditions. The products obtained were characterized after purification by IR, ¹H NMR, and ¹³C NMR spectroscopies, and by the elemental analysis method.     

Synthesis and characterization of polyimides based on isopropylidene-containing bis(ether anhydride)s

Two bis(ether anhydride)s, 4,4′-[1,4-phenylenebis(isopropylidene-1,4-phenyleneoxy)]-diphthalic anhydride (IV _a) and 4,4′-[isopropylidenebis(1,4-phenylene)dioxy]diphthalic anhydride (IV _b), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of 4-nitrophthalonitrile with α,α ′-bis(4-hydroxyphenyl)-1,4-diisopropylbenzene (I _a) and 4,4′-isopropylidenediphenol (I _b) in N,N-dimethylformamide (DMF) in the presence of potassium carbonate. The bis(ether anhydride)s IV _a and IV _b were polymerized with various aromatic diamines to obtain two series of poly(ether amic acid)s VI _a–g and VII _a–g with inherent viscosities in the range of 0.30∼0.74 and 0.29∼1.01 dL/g, respectively. The poly(ether amic acid)s were converted to poly(ether imide)s VIII _a–g and IX _a–g by thermal cyclodehydration. Most of the poly(ether imide)s could afford flexible and tough films, and they showed high solubility in polar solvents such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide, and m-cresol. The obtained poly(ether imide) films had tensile strengths of 45∼83 MPa, elongations-to-break of 6∼27%, and initial modulus of 0.6∼1.7 GPa. The T_gs of poly(ether imide)s VIII _a–g and IX _a–g were in the range of 194∼210 and 204∼243 °C, respectively. Thermogravimetric analysis (TG) showed that 10% weight loss temperatures of all the polymers were above 500 °C in both air and nitrogen atomspheres.     

Synthesis and Digestibility Inhibition of Diarylheptanoids: Structure–Activity Relationship

(±)-5-Hydroxy-1,7-bis-(4-hydroxyphenyl)-3-heptanone (2a), (±)-5-hydroxyl-1-(4-hydroxyphenyl)-7-phenyl-3-heptanone (2b), (±)-5-hydroxy-7-(4-hydroxyphenyl)-1-phenyl-3-heptanone (2c), and (±)-5-hydroxy-1,7-bis-(phenyl)-3-heptanone (2d) have been synthesized to study the structure–activity relationship regarding digestibility inhibition in vitro in cow rumen fluid. The activities were compared with the activity of chiral (S)-2a and its glucoside platyphylloside (1), isolated from Betula pendula. Compound 2a was slightly less active, 2b and 2c were more active, and 2d was less active than (S)-2a and platyphylloside.     

Synthesis of polyfunctionally substituted pyridine-2-(1H)-thiones containing a sulfone moiety

1-Phenyl-2-(phenylsulfonyl)ethanone (1) reacts with DMFDMA to give enamine 2, which upon treatment with cyanothioacetamide affords 3-cyano-5-benzenesulfonyl-4-phenylpyridine-2(1H)-thione (4), a compound that can also be obtained by the reaction of 1-benzenesulfonyl-1-benzoyl-2-ethoxyethene (3) with cyanothioacetamide. The reaction of 2-thiocarbamoylacetamide (8a) and N-phenyl-2-thiocarbamoylacetamide (8b) with 3-aryl-2-benzenesulfonylacrylonitrile (9a– c) affords 10a–f. The methylation of 10d–f with methyl iodide results in the formation of S-methyl derivatives (12a–c). Compound 12c can be obtained by the reaction of 13 with 9c.     

A facile synthesis of some novel fused [1,2,4]triazolo[3,4-b][1,3,4]thiadiazol derivatives

A series of novel 3-[6-(4-substituted phenyl)-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazol-3-ylmethyl]-5,6,7,8-tetrahydro[1]benzothieno[2,3-d]pyrimidin-4(3H)-one derivatives (7a–7h) have been synthesized from 2-amino-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile (1) through a multi-step reaction sequence. The key intermediate (6) on condensation with various substituted aromatic carboxylic acids in the presence of phosphorus oxychloride afforded the series of title compounds (7a–7h). The structures of all newly synthesized compounds were established on the basis of their IR, ¹H-NMR, ¹³C-NMR and liquid chromatography mass spectrometry spectral data.     

Synthesis of 2-Aryl-6-substituted quinolines and their use as fluorescent brightening agents

The condensation of 5-bromoisatin (1a) with aryl methyl ketones (2a–2d) gave 2-aryl-6-bromoquinolines (3a–3d), ammonolysis of which gave the 6-amino-2-arylquinoline derivatives (4a–4d), which were also converted to the corresponding acetyl derivatives 5a–5d by reaction with acetic anhydride. Diazotisation of 4a–4d and coupling with Tobias acid (6) gave o-aminoazo dyes (7a–7d), which were then oxidatively cyclised to the 2-aryl-6-triazoloquinoline derivatives (8a–8d). Treatment of 2-phenyl-6-bromoquinoline-4-carboxylic acid (3a) with cuprous cyanide and copper in quinoline gave 2-phenyl-6-cyanoquinoline (9) which on condensation with 2-aminophenol (10) and 1,2-diaminobenzene (11) yielded 2-phenyl-6-(benzoxazol-2-yl)- and 2-phenyl-6-(benzimidazol-2-yl)-quinolines (12a and 12b, respectively). The possible use of compounds 5a–5d, 8a–8d, 9 and 12a–12b as fluorescent brightening agents was studied.     

Synthesis of fluorocyclohexadienes by the electrochemical fluorination of p-difluorobenzenes on a preparative scale

Fluorine containing-cyclohexadienes (FCHDs), 3,3,6,6,-tetrafluoro-1,4-cyclohexadiene (1a), 1-chloro-3,3,6,6-tetrafluoro-1,4-cyclohexadiene (3a) and 1-bromo-3,3,6,6-tetrafluoro-1,4-cyclohexadiene (4a), were isolated in pure states with high yields (ca. 80%) by the preparative scale electrochemical fluorination of 1,4-difluorobenzene (1), 1-chloro-2,5-difluorobenzene (3) and 1-bromo-2,5-difluorobenzene (4), respectively, in Et₄NF · mHF (Et = C₂H₅: m = 4.0, 4.45 and 4.7) at a platinum anode, followed by extraction and fractional distillation. The electrochemical fluorination of 1,2,4-trifluorobenzene (2) yielded both 1,3,3,6,6-pentafluoro-1,4-cyclohexadiene (2a) and 2,5,5,6,6-pentafluoro-1,3-cyclohexadiene (2b) with high yield (ca. 90%). Some of (2a) was also isolated in a pure state by fractional distillation. Each substrate compound (1–4) was fluorinated to the corresponding FCHDs with an almost quantitative yield when 2.0–2.1 faraday (per mol of substrate) of electricity was passed.     

Studies Towards the Synthesis of Chrysen-6-ol and Benzo[c]phenanthren-5-ol Derivatives: Usual and Unusual Observations

Some interesting observations have been observed in the synthetic studies of chrysen-6-ol and benzo[c]phenanthren-5-ol derivatives by intramolecular cyclization of (2-phenylnaphthalen-1-yl)acetic acid derivatives (4) and (1-phenylnaphthalen-2-yl)acetic acid derivatives (13) with PPA or trifluoroacetic acid (TFA) - trifluoroacetic anhydride (TFAA) mixture. Though chrysen-6-ol derivatives were obtained in very good yields (usual observation) under identical condition attempted cyclization of (1-phenylnaphthalen-2-yl)-acetic acid derivatives (13) produced no benzo[c]phenanthrene-5-ol derivatives (17). On the contrary dimeric intermolecular condensation product (18) (unusual observation) was formed in general in very good to excellent yields. The required precursors (4) were obtained from (2-bromonaphthalen-1-yl)acetonitrile derivative and suitable phenyl boronic acid in two steps although the precursors (13) were prepared from suitable 1-bromo-2-naphthyladehyde and phenyl boronic acid derivatives in six steps.     

Synthesis and properties of copolymers from diphenylacetylene having a hexaphenylbenzene moiety

Summary Copolymerization of diphenylacetylene having a hexaphenylbenzene group, 1-[p-(pentaphenyl)phenyl]-2-phenylacetylene (1), with a few other diphenylacetylene derivatives (i.e., diphenylacetylene, 1-phenyl-2-[p-(trimethylsilyl)phenyl] acetylene, 1-phenyl-2-[p-n-octylphenyl]acetylene, (2a–c, respectively) and properties of the formed copolymers were investigated. No polymer was obtained in homopolymerization of 1 with TaCl₅-n-Bu₄Sn catalyst owing to steric hindrance. On the other hand, copolymerization with 2a–c proceeded at various feed ratios to give copolymers in moderate yields. Copoly(1/2a) (feed ratio 25/75) was soluble in toluene and CHCl₃ and its weight-average molecular weight (M _w) was ca. 31×10⁴ and relatively high. Copoly(1/2b) and copoly(1/2c) (both feed ratios 5/95) were soluble in common organic solvents, and had a large M _w up to ca. 1×10⁶. These copolymers were yellow to orange solids. Oxidative cyclodehydrogenation of hexaphenylbenzene groups in copoly(1/2a) was attempted in order to convert them into more conjugated groups. Received: 24 January 2000/Accepted: 17 February 2000     

Organosoluble and light‐colored fluorinated polyimides based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane and aromatic dianhydrides

A novel fluorinated diamine monomer, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane (2), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride with 2,2‐bis(4‐hydroxyphenyl)propane in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Polyimides were synthesized from diamine 2 and various aromatic dianhydrides 3a–f via thermal imidization. These polymers had inherent viscosities ranging from 0.73 to 1.29 dL/g. Polyimides 5a–f were soluble in amide polar solvents and even in less polar solvents. These films had tensile strengths of 87–100 MPa, elongations to break of 8–29%, and initial moduli of 1.7–2.2 GPa. The glass transition temperatures (T_g) of 5a–f were in the range of 222–271°C, and the 10% weight loss temperatures (T₁₀) of them were all above 493°C. Compared with polyimides 6 series based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) and polyimides 7 based on 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (6FBAPP), the 5 series showed better solubility and lower color intensity, dielectric constant, and lower moisture absorption. Their films had cutoff wavelengths between 363 and 404 nm, b* values ranging from 8 to 62, dielectric constants of 2.68–3.16 (1 MHz), and moisture absorptions in the range of 0.04–0.35 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 922–935, 2005