Texture development and dielectric relaxor behavior of 0.80Na0.5Bi0.5TiO3–0.20K0.5Bi0.5TiO3 ceramics templated by plate-like NaNbO3 particles

Plate-like NaNbO₃ particles were used as templates to fabricate grain-oriented 0.96(0.8Na_0.5Bi_0.5TiO₃–0.2 K_0.5Bi_0.5TiO₃)–0.04NaNbO₃ (NKBT) ceramics. The effects of the sintering temperature and the soaking time on the grain orientation and the microstructure of the textured NKBT ceramics were investigated, and the dielectric relaxor behavior is discussed. The results show that textured ceramics were successfully obtained with orientation factor more than 0.8. The textured ceramics have a microstructure with strip-like grains aligning in the direction parallel to the casting plane. The degree of grain orientation increases initially, then decreases with increasing sintering temperature, and increases continuously with increasing soaking time. The textured NKBT ceramics shows obvious dielectric relaxor characteristics which can be well explained by microdomain–macrodomain transition theory with calculating criterion K. The results show that formation of texture is beneficial to microdomain–macrodomain transition, which lead to weaken relaxor behavior and raise the dielectric constant at T_tr.     

Tuning the electrocaloric effect in 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 ceramics by relaxor phase blending

The pseudo-first-order phase transition in 0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃ ceramics leads to a sharp increase in temperature change (ΔT) in the vicinity of the ferroelectric-to-relaxor transition temperature T_FR (~100 °C) [Appl. Phys. Lett. 110 (2017) 182904]. In this study, we add the 0.78Bi_0.5Na_0.5TiO₃-0.06BaTiO₃-0.16(Sr_0.7Bi_0.2)TiO₃ relaxor phase to the 0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃ ferroelectric matrix to tune its electrocaloric effect. The results show that the addition of the relaxor phase plays a vital role in phase and local-structure evolution. A transition occurs between the ferroelectric and ergodic relaxor phases when the mass fraction of the latter increases to 30% (x = 0.3), as verified by X-ray diffraction analysis, Raman spectroscopy, and polarization-electric field (P-E) hysteresis loops. Furthermore, addition of the relaxor phase reduces the T_FR from 76 °C at x = 0.1–55 °C at x = 0.2; however, this transition disappears at x = 0.3 and 0.4 composite. In-situ piezo-force microscopy (PFM) images illustrate that domains can be written into x = 0.1 and 0.2 ceramics with a valley in the piezoresponse curves. Increasing the temperature agitates the domain arrangement and decreases the contrast for PFM images; this indicates a gradual phase transition in the composite. The temperature corresponding to maximum ΔT exhibits a downward shift (0.58 K at 80 °C for x = 0.1 and 0.5 K at 65 °C for x = 0.2), while the temperature-ΔT curves are flat when x = 0.3 and 0.4. Moreover, the maximum ΔT shows a decrease with an increase in the relaxor phase content; this is believed to be related to a decrease in the latent heat due to a pseudo-first-order to second-order transition. Thus, we suggest that the incorporation of a relaxor phase into ferroelectric matrices is an effective technique to tune their electrocaloric effect and improve the thermal stability of ceramic composites.     

Electrostatic energy storage performances of La(Ni2/3Ta1/3)O3-modified Na0.5Bi0.5TiO3 lead-free ceramics

Ceramic capacitors with high electrostatic energy storage performances have captured much research interest in latest years. Sodium bismuth titanate (Na_0.5Bi_0.5TiO₃)-based ferroelectric ceramics show great potential due to their environment-friendly composition, high polarization, and excellent relaxor properties. However, the nonergodic relaxor state of Na_0.5Bi_0.5TiO₃-based ceramics hampers the decrement of remanent polarization, leading to poor energy storage performance. Herein, the (1 − x)Na_0.5Bi_0.5TiO₃–xLa(Ni_2/3Ta_1/3)O₃ ceramics were designed to generate the transformation between nonergodic and ergodic relaxor state. As a result, the ceramics exhibit improved dielectric relaxation, slim polarization–electric field loops, and flattened current–electric field curves due to highly dynamic polar nanoregions. Particularly, the 0.85Na_0.5Bi_0.5TiO₃–0.15La(Ni_2/3Ta_1/3)O₃ ceramics show large breakdown electric field E_b (345 kV/cm), high recoverable energy density W_rec (3.6 J/cm³), and efficiency η (80.6%), revealing potential applications in electrostatic energy storage.     

Enhanced photodielectric effect in (0.88–x)Bi0.5Na0.5TiO3–0.12BaTiO3 –xBa(Ti0.5Ni0.5)O3–δ (BNBTNO) ceramics

In this work, solid solutions of (0.88–x)Bi_0.5Na_0.5TiO₃–0.12BaTiO₃– xBa(Ti_0.5Ni_0.5)O_3–δ were designed and prepared. These compositions exhibit ferroelectricity at room temperature, with the tetragonal symmetry. The c/a values are varied from ～1.0067 (x?=?0.1) to ～1.0208 (x?=?0.04). A transition from the high–temperature relaxor state to the low–temperature ferroelectric state is demonstrated by the temperature dependence of dielectric data and Raman spectrum. The direct bandgap decreases from 3.40?eV for x?=?0 to 3.16?eV for x?=?0.1. The Ba(Ti_0.5Ni_0.5)O_3–δ addition leads an additional optical absorption peak in the visible range. The obvious photodielectric effect was discovered. In particular, the relative permittivity of the x?=?0.1 composition rises from ～756 to ～807 under light illumination.     

Tailoring structural and electrical properties of A-site non-stoichiometric Na0.5Bi0.5TiO3 ceramic at different sintering temperature

Na/Bi stoichiometry plays crucial role in determining various properties of sodium bismuth titanate-based system. In this work, we have synthesised lead free (Na_0.5Bi_0.5)_1+x TiO₃ (x?=?0, 0.02 and 0.05) ceramics by sol-gel method and systematically presented structural, dielectric and ferroelectric properties at different sintering temperature. Single phase perovskite structure with rhombohedral symmetry (R3c) is obtained for all compositions from low (850°C) to maximum (1150°C) sintering temperature. The shifting of x-ray diffraction peaks and characteristic perovskite metal-oxide vibrational band (～627?cm^?1) in Fourier Transform Infra-red spectra suggests compression or expansion of crystal lattice with Na/Bi non-stoichiometry. Excess of Na/Bi comprises dense crystal growth as compared to pure Na_0.5Bi_0.5TiO₃ composition suggesting compensation of volatile elements loss during heat treatment whose impact has also been observed in dielectric as well as ferroelectric properties. It is observed that Na_0.51Bi_0.51TiO₃ sample with x?=?0.02 exhibits better structural, dielectric and ferroelectric properties in whole range of sintering temperature.     

Effects of BiMO3 on dielectric,ferroelectric, and piezoelectric properties of perovskite lead‐free piezoelectric BaTiO3–(Bi0.5Na0.5)TiO3 ceramics

New lead‐free piezoelectric ceramics of 0.9BaTiO₃–(0.1?x)(Bi_0.5Na_0.5)TiO₃–xBiMO₃, M=Al and Ga, where x=0.00‐0.10, were fabricated by the solid‐state reaction technique. The effect of BiMO₃ contents on the perovskite structure, phase transition, and dielectric, ferroelectric, and piezoelectric properties was investigated. X‐ray diffraction patterns showed that the ceramics exhibit a monophasic perovskite phase up to x=0.06, suggesting stabilized perovskite structures with B‐site aliovalent substitutions. Compositional‐dependent phase transitions were observed from tetragonal to pseudo‐cubic phase with increasing BiMO₃ amounts. Al³⁺ ions were found to stabilize the transition temperature of the ceramics, while significantly decreasing transition temperature, and a change in the dielectric peak were found with an increasing amount of Ga³⁺. Regarding Al³⁺ substitution, the remanent polarization (P_r) values were found to decrease slightly with the Al³⁺ amount. With regard to Ga³⁺ substitution, P_r values decreased with the Ga³⁺ amount up to 0.06 and then increased slightly. The ceramics became softer with a higher degree of substitution according to the lower coercive field (E_c), when compared with 0.9BaTiO₃–0.1(Bi_0.5Na_0.5)TiO₃ ceramics. Ceramics with a lower degree of substitution and tetragonal phase showed butterfly strain loops that correlated with normal ferroelectric behavior.     

Temperature‐Dependent Phase Transitions in the Lead‐Free Piezoceramics (1 – x – y)(Bi1/2Na1/2)TiO3–xBaTiO3–y(K0.5Na0.5)NbO3 Observed by in situ Transmission Electron Microscopy and Dielectric Measurements

Lead‐free piezoelectric (1 – x – y)(Bi_1/2Na_1/2)TiO₃–xBaTiO₃–y(K_0.5Na_0.5)NbO₃ (BNT–BT–KNN) ceramics were examined in situ under increasing temperature in the transmission electron microscope. Changing superstructure reflections indicate a transition from rhombohedral to tetragonal to cubic phase with broad coexistence regions. The additional evolution of the microstructure in combination with dielectric measurements leads to a model of two relaxor‐type phase evolutions with temperature.     

Improved electric-field-induced strain and strong photoluminescence properties in novel Er3+-modified 0.93Bi0.5Na0.5TiO3-0.07BaTiO3 multifunctional ceramics

Recently, the progress of electronic devices toward miniaturization has strongly promoted development of multifunctional materials possessing multiple desirable properties. In this study, we develop and fabricate 0.93Bi_0.5Na_0.5TiO₃-0.07BaTiO₃-xEr multifunctional ceramics which show simultaneously considerable electric-field-induced strain and bright green light emission properties. With the introduction of Er³⁺, the ceramics gradually transform from non-ergodic relaxor phase to ergodic relaxor phase which could reversibly transform to ferroelectric phase under the electric field. As a result, with improving Er³⁺ content, the shape of the polarization-electric field loops of the ceramics become pinched, and it is obvious that the negative strain disappears while the positive strain gradually increases and reaches a maximum value 0.46% at x = 1.2 mol%. Besides, After the ceramics are poled, the light emission peak are greatly enhanced attributed to the decreased crystal symmetry and increased domain size, and is the strongest at x = 1.2 mol%. These results indicate that 0.93Bi_0.5Na_0.5TiO₃-0.07BaTiO₃-xEr ceramics are good candidates for developing multifunctional optoelectronic devices.     

The Relationship Between Phase Structure and Electrical Properties in (1 − x)(Bi0.5Na0.5TiO3–Ba0.5K0.5TiO3–BaTiO3)‐ xK0.5Na0.5NbO3 Quaternary Lead‐Free Piezoelectric Ceramics

(1 ? x)(0.85Bi_0.5Na_0.5TiO₃–0.11Ba_0.5K_0.5TiO₃–0.04BaTiO₃)‐ xK_0.5Na_0.5NbO₃ lead‐free piezoelectric ceramics with x = 0.00, 0.02, 0.03, 0.04, 0.05, and 0.10 were prepared by a conventional solid state method. A coexistence of rhombohedral (R) and tetragonal (T) phases was found in the system, which tended to evolve into pseudocubic symmetry when x increases. The x = 0.04 sample exhibited improved electrical properties: the dielectric constant ε_r = 1900 with the low loss tangents 0.06, the S_max/E_max of ~400 and ~460 pm/V under unipolar and bipolar electric field, respectively. Meanwhile, piezoelectric constant d₃₃ still maintained ~160 pC/N. These could be owed to the formation of polar nanoregions for relaxor phase.     

Study of relaxor behavior in a lead-free (Na0.5Bi0.5)TiO3-SrTiO3-BaTiO3 ternary solid solution system

In this work, single phase lead-free (0.8-x)(Na_0.5Bi_0.5)TiO₃−0.2SrTiO₃-xBaTiO₃ (NBT-ST-BT) ceramics were prepared by conventional solid state reaction method. The effect of BT on the structure and on the dielectric and ferroelectric properties of NBT-ST-BT were investigated. A structural transformation from pseudo-cubic to tetragonal along with possible phase coexistence was witnessed as the BT content was increased. A diffuse phase transition with considerable frequency dispersion in the dielectric response and slim P-E loops evidenced strong relaxor behavior for the ternary system at higher compositions of BT. An analysis of the frequency dependent T_m according to V-F and Power law indicated substantial interaction between the polar nano-regions and relatively broad distribution of freezing temperatures. The study of the dielectric constant at much higher and lower temperatures than T_m in the range of Burn's temperature (T_B) to freezing temperature (T_f) to provide useful information about the growth rate of polar nano-regions and their interactions for a better understanding of the relaxor behavior exhibited by the present ternary system.     

Phase transition and energy storage properties of Bi0.5Na0.5TiO3–Bi(Mg2/3Nb1/3)O3 lead-free ceramics

Bi_0.5Na_0.5TiO₃ (BNT) lead-free ceramics have been extensively studied due to their excellent dielectric, piezoelectric and ferroelectric properties. The phase structure and functionalities of BNT can be feasibly adjusted by doping/forming solid solutions with other elements/components. In this work, Bi(Mg_2/3Nb_1/3)O₃ (BMN) was introduced into BNT by a conventional solid-state reaction to form a homogeneous solid solution of (1-x)(Bi_0.5Na_0.5)TiO₃-xBi(Mg_2/3Nb_1/3)O₃ (BNT-xBMN) with a perovskite structure. With the increase of BMN content, a phase transition from rhombohedral R3c to tetragonal P4bm has been confirmed by XRD, along with shifting the ferroelectric-paraelectric phase transition temperature to lower temperatures with broadening dielectric peaks. Furthermore, an optimized recoverable energy density of 1.405 J/cm³ was achieved for BNT-0.10BMN ceramics under a low applied electric field of 140 kV/cm, which is mainly attributed to the transformation from ferroelectric to ergodic relaxor phase.     

Quenching-circumvented ergodicity in relaxor Na1/2Bi1/2TiO3-BaTiO3-K0.5Na0.5NbO3

Quenching alkaline bismuth titanates from sintering temperatures results in increased lattice distortion and consequently higher depolarization temperature. This work investigates the influence of quenching on the ergodicity of relaxor Na_1/2Bi_1/2TiO₃-BaTiO₃-K_0.5Na_0.5NbO₃. A distinct departure from ergodicity is evidenced from the increase in remanent polarization and the absence of frequency dispersion in the permittivity response of poled samples. Further, the samples exhibit enhanced negative strain upon application of electric field, indicating proclivity towards correlated polar nanoregions, corroborated by the enhanced tetragonal distortion. As a result, ergodic relaxor Na_1/2Bi_1/2TiO₃-6BaTiO₃-3K_0.5Na_0.5NbO₃ exhibits a depolarization temperature of 85°C with a 60% increase in remanent polarization and approximately a threefold increase in remanent strain upon quenching. Quenching-induced changes in the local environment of Na⁺ and Bi³⁺ cations hinder the development of ergodicity promoted by the A-site disorder. These results provide new insight into tailoring ergodicity of relaxor ferroelectrics.     

Synergistic enhancement of piezoelectricity and thermal stability in AlN-doped Bi0.5Na0.5TiO3-based ceramics

The inverse relationship between piezoelectric coefficient (d₃₃) and depolarization temperature (T_d) in Bi_0.5Na_0.5TiO₃-based ceramics is a longstanding obstacle for their applications. In this work, synergistically enhanced d₃₃ and T_d is achieved in AlN-modified 0.84Bi_0.5Na_0.5TiO₃-0.11Bi_0.5K_0.5TiO₃-0.05BaTiO₃ ceramics. Addition of 1 mol% AlN, increases both d₃₃ from 165 to 234 pC/N and T_d by ～50 °C. Rietveld analysis of X-ray powder diffraction (XRD) data reveals an increase in the proportion of the tetragonal phase at 1 mol% AlN incorporation. Moreover, at this composition the modified ceramics exhibit larger grains and high-density lamellar nanodomains with sizes of 30–50 nm. Polarization reversal and domain mobility are thus significantly enhanced, contributing to the large d₃₃. Temperature-dependent dielectric and XRD data revealed that the delayed thermal depolarization is attributed to the improved and poling-field stabilized tetragonality in the modified ceramics.     

Influence of K0.5Bi0.5TiO3 on the structure,dielectric and ferroelectric properties of (Ba,Ca)(Zr,Ti)O3 ceramics

A new lead-free ferroelectric solid solution between (Ba,Ca)(Zr,Ti)O₃ (BCZT) and K_0.5Bi_0.5TiO₃ (KBT) has been systematically investigated in terms of its phase transformations, microstructure, dielectric and ferroelectric properties. The incorporation of KBT into BCZT was found to enhance the sintering behavior, although secondary phases of K₄Ti₃O₈ and BaBi₄Ti₄O₁₅ were detected at high KBT contents. Chemical heterogeneity was also observed in the form of core-shell grain structures comprising tetragonal ferroelectric BCZT-rich cores with pseudo-cubic relaxor ferroelectric KBT-rich shell regions. Temperature-dependent dielectric property measurements revealed that the BCZT-KBT ceramics exhibited both normal and relaxor ferroelectric behaviour simultaneously, associated directly with the core-shell structure. Ferroelectric hysteresis measurements indicated that the remanent polarisation and coercive field were strongly dependent on KBT content. In common with other lead-free relaxor ferroelectrics, increasing temperature led to the formation of constricted polarisation-electric field hysteresis loops, indicating the occurrence of a reversible electric field-induced nanopolar to long-range ordered ferroelectric state.     

Phonon behaviors and dielectric functions in Bi0.5Na0.5TiO3-based ceramics by Raman scattering and optical ellipsometry

The dielectric functions and lattice vibrations of (0.935-x)Bi_0.5Na_0.5TiO₃-0.065BaTiO₃-xSrTiO₃ (BNBSTx) ceramics were investigated by temperature-dependent spectroscopic ellipsometry and Raman scattering. Based on the analysis of dielectric functions with the Tauc-Lorentz dispersion model, it was found that the band gap and the temperature coefficient increased with the addition of SrTiO₃. Moreover, the frequency, intensity and/or full width at half maximum of phonon modes related to Bi and Ti-localized phonon modes exhibited local maximum/minimum around the depolarization temperature and permittivity-maximum temperature, which indicated the ongoing structural transformation. In addition, the Sr introduction affected the TiO₆ tilting and the off-center displacement of Ti⁴⁺. These results seem to be significant for the enhanced response functions with the addition of SrTiO₃ in BNBSTx ceramics.     

Influence of the synthesis conditions on the dielectric properties in the Bi0.5Na0.5TiO3-KTaO3 system

A novel (1 − x)Bi_0.5Na_0.5TiO₃-xKTaO₃ system was characterized using X-ray powder diffraction, scanning electron microscopy, as well as dielectric and ferroelectric measurements. The results showed the formation of solid solutions across the whole concentration range; however, using a solid-state reaction method it was not possible to obtain single-phase ceramics. The secondary phases formed in the system were alkali-hexatitanate and -tetratantalate. The formation of the solid solutions initially starts with the formation of the Bi_0.5Na_0.5TiO₃- and KTaO₃-rich phases, which then react towards the nominal composition at higher temperatures. We observed that the structural and dielectric properties are strongly influenced by the heat-treatment conditions. Typical relaxor properties with a frequency dispersion of the dielectric maximum were obtained only after annealing at a higher temperature, which considerably improved the homogeneity of the perovskite phase. In accordance with the decreasing temperature of the permittivity maximum, ferroelectric measurements showed a changing of the properties from ferroelectric through relaxor to paraelectric with an increasing content of KTaO₃.     

Lead-free BaTiO3-Bi0.5Na0.5TiO3-Na0.73Bi0.09NbO3 relaxor ferroelectric ceramics for high energy storage

A series of (1-x)(0.65BaTiO₃-0.35Bi_0.5Na_0.5TiO₃)-xNa_0.73Bi_0.09NbO₃ ((1-x)BBNT-xNBN) (x = 0–0.14) ceramics were designed and fabricated using the conventional solid-state sintering method. The microstructure, dielectric property, relaxor behavior and energy storage property were systematically investigated. X-ray diffraction results reveal a pure perovskite structure and dielectric measurements exhibit a relaxor behavior for the (1-x)BBNT-xNBN ceramics. The slim polarization electric field (P-E) loops were observed in the samples with x ≥ 0.02 and the addition of Na_0.73Bi_0.09NbO₃ (NBN) could decrease the remnant polarization (P_r) of the (1-x)BBNT-xNBN ceramics obviously. The sample with x = 0.08 exhibits the highest energy storage density of 1.70 J/cm³ and the energy storage efficiency of 82% at 172 kV/cm owing to its submicron grain size and high relative density. These results show that the (1-x)BBNT-xNBN ceramics may be promising lead-free materials for high energy storage density capacitors.     

Enhanced energy storage in temperature stable Bi0.5Na0.5TiO3-modified BaTiO3-Bi(Zn2/3Nb1/3)O3 ceramics

Recently, BaTiO₃-BiMeO₃ ceramics have garnered focused research attention due to their outstanding performance, such as thermal stability, energy efficiency and rapid charge-discharge behavior, however, a lower recoverable energy storage density (W_rec) caused by a relatively low P_max (<30 μC/cm²) mainly hinders practical applications. Herein, the energy density and thermal stability are improved by adding a tertiary component, i.e., Bi_0.5Na_0.5TiO₃, into BaTiO₃-BiMeO₃, resulting in xBi_0.5Na_0.5TiO₃-modified 0.88BaTiO₃-0.12Bi(Zn_2/3Nb_1/3)O₃ ceramics, with x = 0, 0.1, 0.2, 0.3 and 0.4, with superior dielectric properties and eco-friendly impact. Incorporating Bi_0.5Na_0.5TiO₃ with a high saturation polarization and Curie temperature not only significantly enhances P_max of BaTiO₃-Bi(Zn_2/3Nb_1/3)O₃ but also improves Curie temperature of (1-x)[0.88BaTiO₃-0.12Bi(Zn_2/3Nb_1/3)O₃]-xBi_0.5Na_0.5TiO₃ system. Combined with complementary advantages, modified ceramics render a superior energy storage performance (ESP) with a high W_rec of 3.82 J/cm³, efficiency η of 94.4% and prominent temperature tolerance of 25–200 °C at x = 0.3. Moreover, this ceramic exhibit excellent pulse performance, realizing discharge energy storage density W_dis of 2.31 J/cm³ and t_0.9 of 244 ns. Overall, the proposed strategy effectively improved comprehensive properties of BaTiO₃-based ceramics, showing promise in next-generation pulse applications.     

Tailoring Strain Properties of (0.94−x)Bi1/2Na1/2TiO3–0.06BaTiO3–xK0.5Na0.5NbO3 Ferroelectric/Relaxor Composites

A remarkable progress in the quest of lead‐free piezoceramics for actuator applications has been made with the development of incipient piezoceramics featured by giant strains. A drawback, however, is the high electric field required to generate this giant strain. A powerful approach to overcoming this drawback lies in relaxor/ferroelectric (FE) composites comprised such giant strain materials (matrix) and a FE or nonergodic relaxor (seed). In this study, we investigate the effect of K_0.5Na_0.5NbO₃ content in the matrix and the volume ratio of seed to matrix using composites of 0.93Bi_1/2Na_1/2TiO₃–0.07BaTiO₃ as a seed and (0.94 ? x)Bi_1/2Na_1/2TiO₃–0.06BaTiO₃–xK_0.5Na_0.5NbO₃ as a matrix. The strain of all matrices, independent of their K_0.5Na_0.5NbO₃ content, was found to be enhanced by adding a certain amount of seed. An optimum strain is achieved for the composite comprised of a matrix with x = 0.02 K_0.5Na_0.5NbO₃ and 10% seed. By means of a differential analysis on the temperature‐dependent dielectric permittivity, it was shown that the seed phase is still present in the composites despite the naturally expected diffusion process during sintering.     

Preparation of Na0.5Bi0.5TiO3 ceramics by hydrothermal-assisted cold sintering

A recently proposed novel technique, termed “cold sintering process” (CSP), can provide dense ceramic solids at remarkably low temperatures around 180?°C. In a recent work, we successfully obtained dense Na_0.5Bi_0.5TiO₃ ceramics by this method. Bismuth titanate sodium nanoparticles were prepared as the raw material powder by the hydrothermal synthesis route. A hydrothermal precursor solution was used as the transient solvent for cold sintering. Under the combined action of pressure and temperature, the Na_0.5Bi_0.5TiO₃ green body was densified by dissolution-precipitation, and a preliminary densified ceramic sheet was obtained. The amorphous phase in the ceramic sheet was then transformed into a crystalline phase by annealing. Finally, densified Na_0.5Bi_0.5TiO₃ ceramic sheets were obtained, with density of up to 99%, relative permittivity of 681, and dielectric loss of 0.08 at 10?kHz and room temperature. The piezoelectric coefficient d₃₃ of the sample was 52.5?pC/N. The properties of the prepared ceramics were comparable to those of the conventional sintered ceramics.