Facile synthesis and characterization of novel bis(2-S-alkylpyridines) and bis(3-aminothieno[2,3-b]pyridines) incorporating 1,3-diarylpyrazole moiety

3-(4-Hydroxyphenyl)-1-phenyl-1H-pyrazole-4-carbaldehyde (1) is condensed with acetophenone to afford the corresponding unsaturated carbonyl compound 4 whose potassium salt is reacted with 1,4-dibromobutane to afford the bis-unsaturated carbonyl compound 3. Both carbonyl compounds 3 and 4 are reacted with 2-cyanoethanethioamide, through Michael addition reaction followed by cyclocondensation, to prepare the starting materials bis(pyridine-2(1H)-thione) derivative 5 and pyridine-2(1H)-thione derivative 8. Two synthetic routes to synthesize the target materials 7 and 14 are described to get the most efficient method for preparation and maximum yield%. The first route came from the direct alkylation of the bis(pyridine-2(1H)-thione) derivative 5 using iodomethane (6a) and benzyl chloride (6b) to afford the corresponding bis(2-S-alkylpyridine) derivatives 7a,b. The reaction of 5 with halo-containing compounds 10a–d to synthesize the target materials bis(3-aminothieno[2,3-b]pyridine) derivatives 14a–d failed under various reaction conditions. The second route involves the reaction of pyridine-2(1H)-thione derivative 8 with 6a,b and 10a–d to afford the corresponding 2-S-alkylpyridine derivatives 9a,b and 3-aminothieno[2,3-b]pyridine derivatives 13a–d, through the formation of 2-S-alkylpyridine derivatives 12a–d followed by a Thrope-Ziegler reaction, whose potassium salts reacted with 1,4-dibromobutane to afford the corresponding target materials 7a,b and 14a–d, respectively. The structures of target molecules were elucidated using elemental analyses and spectral data.     

Synthesis of bis(hydroxyethyl ether)s of aromatic dihydroxy compounds and poly(ether-carbonate)s with bisphenol A

A new class of copoly(ether-carbonate)s was synthesized using a melt polycondensation reaction of the bis(hydroxyethyl ether) of bisphenol A with bisphenols and diphenyl carbonate. Copolymers with a wide range of T_g values (62–140°C) were obtained. The copolymer structures were established by ¹H NMR, ¹³C NMR and FTIR investigations. © 1998 Society of Chemical Industry     

Synthesis and characterization of new polyamides containing p‐phenylenediacryloyl moieties in the main chain

Six new polyamides 8a–f containing p‐phenylenediacryloyl moieties in the main chain were prepared by the direct polycondensation reaction of bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 with 1,4‐diphenylene diamine 7a , 1,3‐diamino toluene 7b , 1,5‐diamino naphthalene 7c , 4,4′‐diamino diphenyl ether 7d , 4,4′‐diamino diphenyl sulfone 7e , and 3,3′‐diamino diphenylsulfone 7f by using thionyl chloride, N‐methyl‐2‐pyrolidone, and pyridine as condensing agents. These new polymers 8a–f were obtained in high yield and inherent viscosity between 0.35–0.65 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, FTIR and UV–vis spectroscopy. Diacid acid 6 as a new monomer containing p‐phenylenediacryloyl moiety was synthesized by using a three‐step reaction. First, p‐phenylenediacrylic acid 3 was prepared by reaction of terephthal aldehyde 1 with malonic acid 2 in the presence of pyridine, then diacid 3 was converted to p‐phenylenediacryloyl chloride 4 by reaction with thionyl chloride. Finally, bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 was prepared by the condensation reaction of phenylenediacryloyl chloride 4 with p‐aminobenzoic acid 5 . © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel optically active poly(imide–urethane)s derived from N,N′‐(pyromellitoyl)‐bis‐(L‐leucine) diisocyanate and aromatic diols

N,N′‐(Pyromellitoyl)‐bis‐(L ‐leucine) diacid was reacted with ethyl chloroformate in the presence of triethylamine followed by reaction with activated sodium azide and gave N,N′‐(pyromellitoyl)‐bis‐(L ‐leucine) diacylazide in high yield. This diacylazide was heated in dry benzene and gave the unstable N,N′‐(pyromellitoyl)‐bis‐(L ‐leucine) diisocyanate ( 5 ) in quantitative yield. Thus, diisocyanate 5 was generated in situ and polycondensation reaction of this monomer with several aromatic diols, such as 4,4′‐dihydroxybiphenyl, 1,4‐hydroquinone, bisphenol A, phenolphthalein and 1,4‐dihydroxyanthraquinone, was performed in dry toluene under refluxing in the presence of 1,4‐diazabicyclo[2.2.2]octane (triethylenediamine) as a catalyst. The polymerization reactions proceeded within 48 h, producing a series of optically active poly(imide–urethane)s with good yield and moderate inherent viscosity in the range 0.18–0.28 dl g^?1. All of the above polymers were fully characterized by infrared spectra, elemental analyses and specific rotation. Some structural characterization and physical properties of these optically active poly(imide–urethane)s are reported Copyright © 2003 Society of Chemical Industry     

Synthesis and characterization of novel heat resistance poly(amide‐imide)s from N,N′‐[2,5‐bis(4‐aminobenzylidene) cyclopentanone] bistrimellitimide acid and various aromatic diamines

A new‐type of dicarboxylic acid was synthesized from the reaction of 2,5‐bis(4‐aminobenzylidene)cyclopentanone with trimellitic anhydride in a solution of glacial acetic acid/pyridine (Py) at refluxing temperature. Six novel heat resistance poly(amide‐imide)s (PAIs) with good inherent viscosities were synthesized, from the direct polycondensation reaction of N,N′‐[2,5‐bis(4‐aminobenzylidene)cyclopentanone]bistrimellitimide acid with several aromatic diamines, by two different methods such as direct polycondensation in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (Py) and direct polycondensation in a p‐toluene sulfonyl chloride (tosyl chloride, TsCl)/pyridine (Py)/N,N‐dimethylformamide (DMF) system. All of the above polymers were fully characterized by ¹H NMR, FTIR, elemental analysis, inherent viscosity, solubility tests, UV‐vis spectroscopy, differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), and derivative of thermaogravimetric (DTG). The resulted poly(amide‐imide)s (PAIs) have showed admirable good inherent viscosities, thermal stability, and solubility. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Coordination Polymers of 1,9-Bis(8-Hydroxyquinolin-5-yl)-2,5,8-Trioxanonane

ABSTRACT

Coordination polymers of a novel bis(oxine) bidentate ligand, namely 1,9-bis(8-hydroxyquinolin-5-yl)-2,5,8-trioxanonane (BHQTN) (H₂L) have been prepared with the metal ions Zn⁺², Cu⁺², Ni⁺², Co⁺², and Mn⁺². The novel bis(bidentate) ligand BHQTN was synthesized by condensation of 5-chloromethyl-8-hydroxyquinoline hydrochloride with diethylene glycol in the presence of a base catalyst. All of these coordination polymers and the parent ligand were characterized by elemental analyses and IR spectral studies. The diffuse reflectance spectral studies and magnetic susceptibilities of all of the coordination polymers have also been performed. Thermogravimetric parameters such as T_o, T₁₀, T_max., IPDT, and the activation energy of the thermo-degradation process were calculated.     

Synthesis and properties of poly(p-phenylenevinylene-co-sulfonylene) for a blue light-emitting diode

Summary Novel class of p-phenylenevinylene copolymer with sulfonylene group in the main chain (PPVS) was synthesized through the Wittig reaction of bis(bromomethyl-p-phenyl)-sulfone triphenylphosphonium salt with terephthaldehyde. PPVS was highly soluble in common organic solvents and showed strong blue-shifted fluorescence because the polar sulfonylene group provided better solubility and limited π-conjugation in polymer chain. A single layer device with PPVS sandwiched between indium-tin-oxide (ITO) and aluminum electrodes showed a blue electroluminescence (EL) peaked at 470 nm under the threshold voltage of 14 V. HOMO and LUMO levels of PPVS were found to be 0.46 and 0.28 eV, respectively, lower than those of poly(p-phenylenevinylene) (PPV). Received: 20 April 1999/Revised version: 31 May 1999/Accepted: 28 June 1999     

Synthesis and characterization of a novel kind of thermotropic liquid crystalline poly(urea-ester)s based on bis(4′-hydroxyphenyl)-tolyene-2,4-diurea

A new diphenol monomer bis(4′-hydroxy-phenyl)-tolyene-2,4-diurea was synthesized by reaction of 2,4-toylene diisocyanate with p-aminophenol in N,N-dimethylformamide (DMF). The product was characterized by elemental analysis (EA), differential scanning calorimetry (DSC), and ¹H-NMR. And a novel kind of liquid crystalline poly(urea-ester)s were obtained by using this monomer. By using a polarizing microscope with hot stage (POM), wide-angle X-ray diffraction (WAXD) and small-angle X-ray diffraction (SAXD) the polymers were proven to be nematic liquid crystal. The result of DSC showed that the effect of the monomer composition on the melting point of poly(urea-ester)s was significant. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 577–583, 2001     

Synthesis and antimicrobial activities of some ethyl 2-arylthio-6-arylimidazo[2,1-b]thiazole-3-carboxylates and their sulfones

A series of new 2-arylthio-3-ethoxycarbonyl-6-arylimidazo[2,1-b]thiazoles (4a–4h) and 2-arenesulfonyl-3-ethoxycarbonyl-6-arylimidazo[2,1-b]thiazoles (5a–5h) have been prepared and characterized by analytical and spectral methods. The title compounds 4a–4h and 5a–5h were obtained by the reaction of 2-amino-4-ethoxycarbonyl-5-arylthiothiazoles (2a and 2b)/2-amino-4-ethoxycarbonyl-5-arenesulphonyl-thiazoles (3a and 3b) with various phenacyl bromides in anhydrous ethanol. These newly synthesized compounds (4a–4h and 5a–5h) were screened for their antibacterial activity against Gram-negative bacterium Escherichia coli, Gram-positive bacterium Staphylococcus aureus, and antifungal properties against Aspergillus niger and Candida albicans.     

2-Mercapto-4,6-disubstituted nicotinonitriles: versatile precursors for novel mono- and bis[thienopyridines]

A series of novel thieno[2,3-b]pyridines were prepared from the reaction of the appropriate bromoacetylbenzofurans or bromoacetylbenzothiazole with the corresponding pyridinethione derivatives in ethanolic sodium ethoxide at reflux. Moreover, new bis(thieno[2,3-b]pyridine) derivatives have also been synthesized by the reaction of the appropriate bis-bromoacetyl derivatives with the corresponding pyridinethiones in the presence of sodium ethoxide. Attempts to synthesize the target bis(thieno[2,3-b]pyridine) derivatives by bis-alkylation of the corresponding (thieno[2,3-b]pyridin-2-yl)(hydroxyphenyl)methanone with the appropriate dihaloalkanes using a mild base were unsuccessful.     

Syntheses of some novel and symmetrical bis(4-amino-4H-1,2,4-triazole-3-thiols)

A series of bis(4-amino-4H-1,2,4-triazole-3-thiols) 3a–e were prepared by condensation reactions of 2,2′-(phenylmethylene)bis(sulfanediyl)diacetic acids 2a–e with thiocarbohydrazide. The starting diacid 2a–e was prepared by reactions of aromatic aldehydes 1a–e with 2-mercaptoacetic acid. The structures of these newly synthesized compounds are characterized by elemental analysis, and infrared and NMR spectroscopy.     

Synthesis and characterization of novel poly(amide imide)s based on bis(p‐amidobenzoic acid)‐n‐trimellitylimido‐L‐leucine

N‐Trimellitylimido‐L ‐leucine was reacted with thionyl chloride, and N‐trimellitylimido‐L ‐leucine diacid chloride was obtained in a quantitative yield. The reaction of this diacid chloride with p‐aminobenzoic acid was performed in dry tetrahydrofuran, and bis(p‐amidobenzoic acid)‐N‐trimellitylimido‐L ‐leucine (5) was obtained as a novel optically active aromatic imide–amide diacid monomer in a high yield. The direct polycondensation reaction of the monomer imide–amide diacid 5 with 4,4′‐diaminodiphenylsulfone, 4,4′‐diaminodiphenylether, 1,4‐phenylenediamine, 1,3‐phenylenediamine, 2,4‐diaminotoluene, and benzidine (4,4′‐diaminobiphenyl) was carried out in a medium consisting of triphenyl phosphite, N‐methyl‐2‐pyrolidone, pyridine, and calcium chloride. The resulting novel poly(amide imide)s (PAIs), with inherent viscosities of 0.22–0.52 dL g^?1, were obtained in high yields, were optically active, and had moderate thermal stability. All of the compounds were fully characterized with IR spectroscopy, elemental analyses, and specific rotation. Some structural characterization and physical properties of these new optically active PAIs are reported. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 35–43, 2002; DOI 10.1002/app.10181     

Synthesis and properties of organosoluble poly(ether imide)s containing 4,4′(octahydro-4,7-methano-5H-inden-5-ylidene) cardo group

A series of organosoluble aromatic poly(ether imide)s (PEIs) VIIa-k were synthesized from 4,4′-[(octahydro-4,7-methano-5H-inden-5-ylidene)bis(1,4-phenylene)dioxy] diphthalic dianhydride (IV) and various aromatic diamines. PEIs synthesized through two-stage polymerization had inherent viscosities of 0.51–0.64 dL/g. This series of polymers could also be synthesized from IV and diamines in a small amount of refluxing m-cresol in a one-step process and had inherent viscosities of 0.65–0.87 dL/g. For the low melting point diamines (Vj and Vk), polymers could be obtained by bulk polymerization and had inherent viscosities of 0.36 and 0.41 dL/g. Polymers showed good organosolubility and could be cast into transparent, flexible, and tough polyimide films with good tensile properties. These PEIs had glass transition temperatures among 203–281°C. Thermogravimetric analyses established that these polymers were fairly stable up to 430°C, and the 10% weight loss temperatures were recorded in the range of 473–503°C in nitrogen and 481–512°C in air atmosphere. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 987–996, 1999     

Highly Enantioselective Friedel–Crafts Reaction of Indole with Alkylidenemalonates Catalyzed by Heteroarylidene Malonate‐Derived Bis(oxazoline) Copper(II) Complexes

A series of cheap and easily accessible heteroarylidenemalonate‐derived bis(oxazoline) ligands 1 and 2 were synthesized and their copper(II) complexes were applied to the catalytic Friedel–Crafts reaction between indoles and diethyl alkylidenemalonates, Excellent asymmetric enantioselectivities were afforded for the S‐enantiomer (up to >99% ee) in isobutyl alcohol, and the R‐enantiomer (up to 96.5% ee) in dichloromethane.     

Preparation and characterization of poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones

The two poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones have been prepared via polycondensation reaction of di‐tert‐butyl adipate and di‐tert‐butyl fumarate with 2,2‐bis(p‐chloro dimethylsiloxy‐phenyl)propane to give tert‐butyl chloride as the condensate. The polymerizations were performed under nitrogen at 110°C for 24 h without addition of solvents and catalysts to obtain the poly(silyl ester)s with weight average molecular weights typically ranging from 5000 to 10,000 g/mol. Characterization of the poly(silyl ester)s included ¹H NMR and ¹³C NMR spectroscopies, infrared spectroscopy, ultraviolet spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), gel permeation chromatography, and Ubbelohde viscometer. The glass transition temperatures (T_g) of the obtained polymers were above zero because of the introducing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones. The TGA/DTG results showed that the obtained poly(silyl ester)s were stable up to 180°C and the residual weight percent at 800°C were 18 and 9%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1937–1942, 2006     

Synthesis of poly(ether amide)s from p‐xylylene glycol and bis(ether nitrile)s

BACKGROUND: Poly(ether amide)s have been well studied in terms of improving the physical and thermal properties of aromatic polyamides. Poly(ether amide)s of high enough molecular weight to be useful for industrial purposes are generally difficult to prepare. The objective of this project was to introduce a simple and commercially feasible process to prepare poly(ether amide)s by a polymerization reaction at relatively low temperature. RESULTS: A series of poly(ether amide)s were prepared by direct polyamidation of p‐xylylene glycol with bis(ether nitrile)s via the Ritter reaction using concentrated H₂SO₄ in acetic acid. The synthesized poly(ether amide)s showed good solubility in polar aprotic solvents. The resultant poly(ether amide)s had inherent viscosities in the range 0.36–1.03 dL g^?1. The glass transition temperatures of the poly(ether amide)s were determined using differential scanning calorimetry to be in the range 190–258 °C. Thermogravimetric analysis data for these polymers indicated the 10% weight loss temperatures to be in the range 290–390 °C in nitrogen atmosphere. CONCLUSION: The Ritter reaction was applied for the synthesis of a variety of poly(ether amide)s with moderate to high molecular weights. This procedure provides a simple polymerization process for the convenient preparation of poly(ether amide)s in high yield at room temperature. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of new aromatic poly(amide–imide)s based on 4‐aryl‐2,6‐bis(4‐trimellitimidophenyl) pyridines

New diimide–dicarboxylic acids, ie 4‐phenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine and 4‐p‐biphenyl‐2,6‐bis‐(4‐trimellitimidophenyl)pyridine, were synthesized by the condensation reaction of 4‐phenyl‐2,6‐bis(4‐aminophenyl)pyridine and 4‐p‐biphenyl‐2,6‐bis(4‐aminophenyl)pyridine with trimellitic anhydride in glacial acetic acid or dimethylformamide. The monomers were fully characterized by FT‐IR and NMR spectroscopies, and elemental analyses. A series of novel poly(amide–imide)s with inherent viscosities of 0.68–0.87 dl g^?1 was prepared from the two diimide–diacids with various aromatic diamines by direct polycondensation. The poly(amide–imide)s were characterized by FT‐IR and NMR spectroscopies. The λ_max data for the resulting poly(amide–imide)s were in the range of 260–292 nm. These polymers exhibited good solubilities in polar aprotic solvents. The 10 % weight loss temperatures are above 485 °C under a nitrogen atmosphere. Copyright © 2004 Society of Chemical Industry     

Synthesis and properties of <Emphasis Type="Italic">ortho</Emphasis>-linked aromatic poly(ester-amide)s and poly(ester-imide)s bearing 2,3-bis(benzoyloxy)naphthalene units

Two new naphthalene-ring-containing bis(ester-amine)s, 2,3-bis(4-aminobenzoyloxy)naphthalene (p-2) and 2,3-bis(3-aminobenzoyloxy)naphthalene (m-2), were prepared from the condensation of 2,3-dihydroxynaphthalene with 4-nitrobenzoyl chloride and 3-nitrobenzoyl chloride, respectively, followed by catalytic hydrogenation. The novel aromatic poly(ester-amide)s and poly(ester-imide)s having 2,3-linked bis(benzoyloxy)naphthalene units have been synthesized from the polycondensation reactions of bis(ester-amine)s (p-2 and m-2) or an equimolar mixture of 4,4′-oxydianiline and p-2 or m-2 with various aromatic dicarboxylic acids and dianhydrides. The synthesis of the poly(ester-amide)s was achieved by the phosphorylation polyamidation reaction by means of triphenyl phosphate, and the synthesis of the poly(ester-imide)s included ring-opening polyaddition to give poly(amic acid)s followed by chemical imidization to polyimides. Most of the poly(ester-amide)s were readily soluble in various organic solvents. Six poly(ester-amide)s and two poly(ester-imide)s derived from less rigid diacids and dianhydrides, respectively, were amorphous and could be solution-cast into transparent and tough films with good mechanical properties. Most of the poly(ester-amide)s displayed discernible glass-transition temperatures (T _gs) between 192 and 223 °C in the DSC traces. All of the poly(ester-imide)s, except for one sample, showed clear T _g values between 225 and 265 °C by DSC. These poly(ester-imide)s showed excellent thermal stability with 10 wt% loss temperatures above 460 °C in nitrogen or air.     

A new and efficient synthetic method of a liquid crystalline epoxy resin with biphenol and aromatic ester group

This article describes a high efficient and economical method to synthesize a liquid crystalline epoxy resin (LCER) containing biphenol and aromatic ester group, 3,3′,5,5′-tetramethylbiphenyl-4,4′-diyl bis(4-(oxiran-2-ylmethoxy) benzoate) (4). First, 3,3′,5,5′-tetramethylbiphenyl-4,4′-diyl bis(4-hydroxybenzoate) (3) was prepared by direct esterification of 3,3′,5,5′-tetramethylbiphenyl-4,4′-diol (2) with p-hydroxybenzoic acid (1) in the presence of a certain amount of p-toluene sulfonic acid (p-TSA) as catalyst. And then (4) was synthesized by the reaction of (3) with epichlorohydrin. The chemical structure, melting range, and liquid crystalline phase transition behavior of (4) were characterized by FT-IR, ¹H-NMR, ¹³C-NMR, mass spectroscopy, differential scanning calorimetry (DSC), and polarized optical microscopy (POM).     

Synthesis and properties of novel phosphorus‐containing poly(ether ether ketone ketone)s

A novel monomer, bis[4‐(4‐fluorobenzoyl)phenyl]phenylphosphine oxide, was synthesized through the reaction of bis(4‐chloroformylphenyl) phenyl phosphine oxide with fluorobenzene. Three poly(ether ether ketone ketone)s derived from bis[4‐(4‐fluorobenzoyl)phenyl]phenylphosphine oxide and different aromatic bisphenols were prepared by aromatic nucleophilic substitution reactions. The resulting polymers had inherent viscosities in the range of 0.55–0.73 dL/g. The structures of the poly(ether ether ketone ketone)s were characterized with Fourier transform infrared and ¹H‐NMR. Thermal analysis indicated that the glass‐transition temperatures of the poly(ether ether ketone ketone)s were higher than 200°C, and the 5% weight loss temperatures in nitrogen were higher than 463°C. All the polymers showed excellent solubility in polar solvents such as N‐methyl‐2‐pyrrolidone, dimethylformamide, and dimethylacetamide and could also be dissolved in chlorinated methane. The polymers afforded transparent and flexible films by solvent casting. Organic phosphorous moieties also imparted good flame‐retardancy to the polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008