Design and measurement of signal processing system for cavity beam position monitor

<正>In this paper,in order to achieve the output signal processing of cavity beam position monitor(CBPM),we develop a digital intermediate frequency receiver architecture based signal processing system,which consists of radio frequency(RF) front end and high speed data acquisition board.The beam position resolution in the CBPM signal processing system is superior to 1μm.Two signal processing algorithms,fast Fourier transform(FFT) and digital down converter(DDC),are evaluated offline using MATLAB platform,and both can be used to achieve,the CW input signal,position resolutions of 0.31μm and 0.10μm at -16 dBm.The DDC algorithm for its good compatibility is downloaded into the FPGA to realize online measurement,reaching the position resolution of 0.49μm due to truncation error.The whole system works well and the performance meets design target.     

脉冲中子多参数能谱测井仪的地面数据获取系统

研究了脉冲中子多参数能谱测井仪的数据传输和地面计算机控制数据获取过程,设计了以８０Ｃ１９６单片机为微处理器的智能碳氧比地面数据获取系统。该系统采用软件的方法完成对曼彻期特码的编码和译码,并具备较强的通讯诊断和井下仪器的诊断功能,在Ｃ／Ｏ测井方面的功能与２７２７完全一致。     

The development of data acquisition and processing application system for RF ion source

As the key ion source component of nuclear fusion auxiliary heating devices, the radio frequency(RF) ion source is developed and applied gradually to offer a source plasma with the advantages of ease of control and high reliability. In addition, it easily achieves long-pulse steady-state operation. During the process of the development and testing of the RF ion source, a lot of original experimental data will be generated. Therefore, it is necessary to develop a stable and reliable computer data acquisition and processing application system for realizing the functions of data acquisition, storage, access, and real-time monitoring. In this paper, the development of a data acquisition and processing application system for the RF ion source is presented. The hardware platform is based on the PXI system and the software is programmed on the Lab VIEW development environment. The key technologies that are used for the implementation of this software programming mainly include the long-pulse data acquisition technology, multithreading processing technology, transmission control communication protocol, and the Lempel–Ziv–Oberhumer data compression algorithm. Now, this design has been tested and applied on the RF ion source. The test results show that it can work reliably and steadily. With the help of this design, the stable plasma discharge data of the RF ion source are collected,stored, accessed, and monitored in real-time. It is shown that it has a very practical application significance for the RF experiments.     

The development of data acquisition and control system for extraction power supply of prototype RF ion source

A 16 kV/20 A power supply was developed for the extraction grid of prototype radio frequency (RF) ion source of neutral beam injector.To acquire the state signals of extraction grid power supply (EGPS) and control the operation of the EGPS,a data acquisition and control system has been developed.This system mainly consists of interlock protection circuit board,photoelectric conversion circuit,optical fibers,industrial compact peripheral component interconnect (CPCI) computer and host computer.The human machine interface of host computer delivers commands and data to program of the CPCI computer,as well as offers a convenient client for setting parameters and displaying EGPS status.The CPCI computer acquires the status of the power supply.The system can turn-off the EGPS quickly when the faults of EGPS occur.The system has been applied to the EGPS of prototype RF ion source.Test results show that the data acquisition and control system for the EGPS can meet the requirements of the operation of prototype RF ion source.