共查询到20条相似文献,搜索用时 156 毫秒
1.
根据约束线性规划原理及涤纶短纤维生产过程中物理变化的内在联系,建立了中空涤纶短纤维配料的数学模型,该模型充分考虑了再生涤纶短纤维生产的工艺要求,得到了适合生产需要的配料结果。通过实例模拟配料计算,该模型比常规配料计算更科学。 相似文献
2.
对1.33dtex涤纶短纤维生产成形机理进行了分析,探讨了生产高强低伸型1.33dtex涤纶短纤维工艺。 相似文献
3.
4.
5.
新型涤纶短纤维油剂在生产中的应用 总被引:1,自引:0,他引:1
通过对在棉型涤纶短纤维生产中 ,新型涤纶短纤维油剂的工作液调配、纤维上油工艺及纺纱加工的相关特性研究 ,探讨合理使用该品种油剂 ,提高涤纶短纤维可纺性和适用性的方法 相似文献
6.
介绍了利用再生材料生产远红外三维卷曲中空涤纶短纤维的生产控制要点。通过原料的把关,前后纺工艺的调整,生产出了质优价廉的远红外再生三维卷曲中空涤纶短纤维。 相似文献
7.
大容量涤纶短纤维纺丝工艺和设备的发展趋势 总被引:2,自引:0,他引:2
介绍了我国涤纶短纤维设备的发展历史;分析了国内大容量涤纶短纤维设备现状;比较了涤纶短纤维纺丝工艺和设备特点,重点分析了大容量涤纶短纤维生产装置的纺丝关键技术,即组件、喷丝板、丝束冷却装置的关键技术;指出了提高纺丝单位产能的有效途径;比较了各种形式的丝束冷却吹风装置和喷丝板直径小于等于400mm和大于400mm时,两种吹风形式工艺条件下纺丝成品产量和质量的关联度;提出了对200t/d及以上大容量涤纶短纤维纺丝技术研发方向的建议。 相似文献
8.
9.
10.
2.22dtex阳离子可染涤纶短纤维生产工艺探讨 总被引:1,自引:1,他引:0
从涤纶短纤维生产工艺的共性出发 ,结合阳离子切片本身的特性 ,探讨了生产 2 2 2dtex阳离子可染涤纶短纤维的主要生产工艺 ,并与常规 2 2 2dtex涤纶短纤维作了简要对比。最后对CDP纤维的染色性能作了简要介绍 相似文献
11.
Eigil Strmse 《Propellants, Explosives, Pyrotechnics》1992,17(6):295-297
Probit analysis is an efficient method for analyzing sensitiveness test data. If the aim is to determine themedian stimulus value, the choice of stimulus scale is of minor importance. If, on the other hand, extreme frequencies are to be predicted, great care should be taken in the selection of an appropriate stimulus scale. A scale incorporating an upper and a lower stimulus level corresponding to explosion probability 1 and 0, respectively, is suggested. In an illustrative example this scale is shown to involve considerably less bias than either a simple linear or logarithmic scale. 相似文献
12.
Amino acid modified polyaspartic acids were evaluated as calcium-scale inhibitors. Feasibility of scale inhibition experiments was analyzed by molecular dynamics simulation and Gaussian optimization, and the scale inhibition mechanism was theoretically analyzed. Scale inhibition performance was studied by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, static scale inhibition experiments, and electrochemical performance testing, which provided an experimental basis for the molecular dynamics simulation. The experimental results showed that Arg-SA-PASP has better scale inhibition and corrosion inhibition performance than His-SA-PASP. The scale inhibition effect increased with increasing concentration. Electrochemical tests indicated that Arg-SA-PASP is an excellent scale and corrosion inhibitor. 相似文献
13.
Tuğba Mutuk Arife Kübra Demirbaş Sinem Çevik Başak Mesci Oktay 《International Journal of Applied Ceramic Technology》2020,17(1):197-204
The scale is a waste coming from the metal casting industry. It is an iron oxide layer formed as a result of oxidation after annealing on steel surfaces. Casting wastes, which have been left uncontrolled for many years, have caused considerable environmental damage. In the present paper, the mechanical properties and microstructural characterization of cement mortars, prepared by using scale coming from Turkey steel manufacturer were experimentally investigated. The steel scale was used as a partial replacement of cement. Recycling of solid waste scale is considered as an environmental-friendly alternative to solve the problem of disposing of wastes. Cement mortar admixtures were prepared by variable percentages of scale from 2% to 10%. The effect of scale on the strength of cement mortar was analyzed. The compressive strength values of all the specimens were recorded for 3, 7, and 28 days and the results showed that when the amount of scale replacement was increased, the strength increased slightly. However, cement mortar containing 4% wt. additive has shown the highest strength value at 3 and 28 days. As a result an optimum additive amount of scale in the cement mortar is found as 4% wt. Microstructural observation of the samples using SEM showed that scale particles were well embedded in the c matrix. 相似文献
14.
15.
16.
17.
18.
采用静态阻垢和旋转挂片腐蚀试验方法研究了ZPS03阻垢缓蚀剂在高硬度高碱度水质中的阻垢缓蚀性能。结果表明,循环冷却水浓缩倍数不超过2.0时,ZPS03具有优良的阻垢缓蚀性能;浓缩倍数超过2.0时,加稀硫酸降低pH是一种有效的控制结垢措施。 相似文献
19.
Proper management of waste bio‐based materials is an important subject to protect the environment in a sustainable manner. In this study, ethylene‐propylene‐diene monomer (EPDM) composites with different fish scale content were prepared and properties of these composites were investigated. Mechanical tests, gel content, curing, and thermal properties were analyzed. In addition, rheological and morphological analyses were also carried out. It was seen that EPDM rubber and fish scale composite have a good compatibility. The addition of fish scale improved the mechanical properties of the final material. Moreover, an increase in gel content and in swelling ratio was obtained for the composite samples containing fish scale. Moving die rheometer tests are concluded that fish scale has acted like an agent that improves the vulcanization process. Thermal gravimetric analysis result pointed out that the thermal stability of the composite developed is higher than neat EPDM. It was concluded that 40 phr fish scale content gives best results. The kinetic study demonstrated that fish scale is compatible with the matrix and improves the vulcanization process. The results have shown that using the fish scale as a bio‐based filler is a facile and green way to accommodate the bio‐based wastes. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46698. 相似文献