Evaluation of superabsorbent linseed-polysaccharides as a novel stimuli-responsive oral sustained release drug delivery system

Context: Advancement in technology has transformed the conventional dosage forms to intelligent drug delivery systems. Such systems are helpful for targeted and efficient drug delivery with minimum side effects. Drug release from these systems is governed and controlled by external stimuli (pH, enzymes, ions, glucose, etc.). Polymeric biomaterial having stimuli-responsive properties has opened a new area in drug delivery approach.

Objective: Potential of a polysaccharide (rhamnogalacturonan)-based hydrogel from Linseeds (Linum usitatissimum L.) was investigated as an intelligent drug delivery material.

Materials and methods: Different concentrations of Linseed hydrogel (LSH) were used to prepare caffeine and diacerein tablets and further investigated for pH and salt solution-responsive swelling, pH-dependent drug release, and release kinetics. Morphology of tablets was observed using SEM.

Results: LSH tablets exhibited dynamic swelling–deswelling behavior with tendency to swell at pH 7.4 and in deionized water while deswell at pH 1.2, in normal saline and ethanol. Consequently, pH controlled release of the drugs was observed from tablets with lower release (<10%) at pH 1.2 and higher release at pH 6.8 and 7.4. SEM showed elongated channels in swollen then freeze-dried tablets.

Discussion: The drug release was greatly influenced by the amount of LSH in the tablets. Drug release from LSH tablets was governed by the non-Fickian diffusion.

Conclusions: These finding indicates that LSH holds potential to be developed as sustained release material for tablet.     

Applying the approximation method PAINT and the interactive method NIMBUS to the multiobjective optimization of operating a wastewater treatment plant

Using an interactive multiobjective optimization method called NIMBUS and an approximation method called PAINT, preferable solutions to a five-objective problem of operating a wastewater treatment plant are found. The decision maker giving preference information is an expert in wastewater treatment plant design at the engineering company Pöyry Finland Ltd. The wastewater treatment problem is computationally expensive and requires running a simulator to evaluate the values of the objective functions. This often leads to problems with interactive methods as the decision maker may get frustrated while waiting for new solutions to be computed. Thus, a newly developed PAINT method is used to speed up the iterations of the NIMBUS method. The PAINT method interpolates between a given set of Pareto optimal outcomes and constructs a computationally inexpensive mixed integer linear surrogate problem for the original wastewater treatment problem. With the mixed integer surrogate problem, the time required from the decision maker is comparatively short. In addition, a new IND-NIMBUS^® PAINT module is developed to allow the smooth interoperability of the NIMBUS method and the PAINT method.     

In vitro characterization studies of self-microemulsified bosentan systems

Context: Bosentan is a poorly soluble drug and pose challenges in designing of drug delivery systems.

Objective: The objective of this study is to enhance the solubility, dissolution and shelf-life of bosentan by formulating it as S-SMEDDS capsules.

Materials and methods: Solubility of bosentan was tested in various liquid vehicles such as oils (rice bran and sunflower), surfactants (span 20 and tween 80) and co-surfactants (PEG 400 and propylene glycol) and microemulsions were developed. Bosentan was incorporated into appropriate microemulsion systems which were previously identified from pseudo ternary phase diagrams. Bosentan-loaded SMEDDS were evaluated for drug content, drug release, zeta potential, and droplet size. The selected liquid SMEDDS were converted into solid SMEDDS by employing adsorption and melt granulation. Solid SMEDDS were characterized for micromeritics and evaluated for drug content, drug release, and shelf-life.

Results: Isotropic systems R5, R13, S5, and S13 with submicron droplet size had exhibited 85.45, 94.12, 81.67, and 96.64% drug release, respectively. Solid SMEDDS of MR13 and AS13 formulations with rapid reconstitution ability, exhibited 84.85 and 86.74% of on par drug release. The formulations were physicochemically intact for 1.02 and 1.56 years.

Discussion: Liquid SMEDDS composed with PEG400 had displayed optimal characters. Solid SMEDDS had high-dissolution profiles than bosentan due to modification in the crystalline structure of drug upon microemulsification.

Conclusion: Thus, solid SMEDDS addressed the solubility, dissolution, and stability issues of bosentan and becomes an alternate for clinical convenience.     

Integrating biopharmaceutics risk assessment and in vivo absorption model in formulation development of BCS class I drug using the QbD approach

Objective: Clinically relevant critical quality attributes (CQA’s) were identified for the development of generic drug products containing fluconazole and potential design spaces relevant to the clinical application of the drug candidate was explored.

Significance: A simplified scoring system for the biopharmaceutics risk assessment roadmap (BioRAM) is proposed to guide product development.

Methods: Factorial design of experiments was employed to study the effect of formulation and process variables on CQA’s. The in vivo model was developed for predicting the fraction of drug absorbed and to identify the effect of formulation components on drug absorption.

Results: BioRAM yielded low scores for fluconazole absorption with respect to severity (risks of sub and supra-bioavailable drug products), probability of incidence of bioinequivalent results and capacity of detection. The results demonstrated that dissolution was highly influenced by the active pharmaceutical ingredient (API) polymorphism and the ratio of diluents. Process variables (mixing time, lubricant concentration, lubrication time and filling speed) did not impact the clinical outcome of the formulation with respect to dissolution and content uniformity.

Conclusions: Understanding the clinical implications of the adopted formulation approach led to the construction of purposeful design space and control strategy.     

Conveying a newly designed hydrophilic anti-human thymidylate synthase peptide to cisplatin resistant cancer cells: are pH-sensitive liposomes more effective than conventional ones?

Context: LR-peptide, a novel hydrophilic peptide synthetized and characterized in previous work, is able to reduce the multi-drug resistance response in cisplatin (cDPP) resistant cancer cells by inhibiting human thymidylate synthase (hTS) overexpressed in several tumors, including ovarian and colon-rectal cancers, but it is unable to enter the cells spontaneously.

Objective: The aim of this work was to design and characterize liposomal vesicles as drug delivery systems for the LR peptide, evaluating the possible benefits of the pH-responsive feature in improving intracellular delivery.

Materials and methods: For this purpose, conventional and pH-sensitive liposomes were formulated, compared regarding their physical-chemical properties (size, PDI, morphology, in vitro stability and drug release) and studied for in vitro cytotoxicity against a cDDP-resistant cancer cells.

Results and discussion: Results indicated that LR peptide was successfully encapsulated in both liposomal formulations but at short incubation time only LR loaded pH-sensitive liposomes showed cell inhibition activity while for long incubation time the two kinds of liposomes demonstrated the same efficacy.

Conclusions: Data provide evidence that acidic pH-triggered liposomal delivery is able to significantly reduce the time required by the systems to deliver the drug to the cells without inducing an enhancement of the efficacy of the drug.     

Formulation and characterization of taste masked ondansetron–magnesium aluminum silicate adsorption systems

Context: Taste masking greatly influences the acceptability of bitter tasting formulation; moreover, it governs the commercial and therapeutic success of drug products.

Objective: This work is directed toward masking the bitter taste of ondansetron HCl (ONS) utilizing the excipient, which can delay the reach of drug to the taste buds.

Material and methods: Magnesium aluminum silicate (Veegum F), a clay material having capability to adsorb the drugs onto it, was used. The adsorption systems of ONS with Veegum were obtained by dynamic adsorption technique and examined by scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) for morphology, thermal behavior, and interactions. The taste assessment of prepared systems was done by in vitro method based on drug release.

Results: The molecular interaction between ONS and Veegum in the system was revealed by FTIR spectroscopy. A change in thermal behavior of the system was observed owing to interaction or replacement of the cationic groups of Veegum with that of ONS. XRD studies revealed that the prepared system was having lower crystallinity as compared to ONS. The in vitro drug release study showed that ONS release from the system was relatively slow in basic environment than the acidic one.

Discussion: Adsorption of ONS on the surface of Veegum was mainly due to electrostatic interactions and hydrogen bonding.

Conclusion: The experimental results reveal the successful intercalation of ONS into the space available between the layers of Veegum. Furthermore, this resulted in a control on drug release in salivary pH resulting in a concentration lower than bitterness threshold.     

Aerosolized liposomes with dipalmitoyl phosphatidylcholine enhance pulmonary absorption of encapsulated insulin compared with co-administered insulin

Objective: We have previously shown that aerosolized liposomes with dipalmitoyl phosphatidylcholine (DPPC) enhance the pulmonary absorption of encapsulated insulin. In this study, we aimed to compare insulin encapsulated into the liposomes versus co-administration of empty liposomes and unencapsulated free insulin, where the DPCC liposomes would serve as absorption enhancer.

Significance: The present study provides the useful information for development of noninvasive treatment of diabetes.

Methods: Co-administration of empty DPPC liposomes and unencapsulated free insulin was investigated in vivo to assess the potential enhancement in protein pulmonary absorption. Co-administration was compared to DPPC liposomes encapsulating insulin, and free insulin.

Results: DPPC liposomes enhanced the pulmonary absorption of unencapsulated free insulin; however, the enhancing effect was lower than that of the DPPC liposomes encapsulating insulin. The mechanism of the pulmonary absorption of unencapsulated free insulin by DPPC liposomes involved the opening of epithelial cell space in alveolar mucosa, and not mucosal cell damage, similar to that of the DPPC liposomes encapsulating insulin. In an in vitro stability test, insulin in the alveolar mucus layer that covers epithelial cells was stable. These findings suggest that, although unencapsulated free insulin spreads throughout the alveolar mucus layer, the concentration of insulin released near the absorption surface is increased by the encapsulation of insulin into DPPC liposomes and the absorption efficiency is also increased.

Conclusion: We revealed that the encapsulation of insulin into DPPC liposomes is more effective for pulmonary insulin absorption than co-administration of DPPC liposomes and unencapsulated free insulin.     

Enhancing the solubility and masking the bitter taste of propiverine using crystalline complex formation

Context: Patient compliance can be reduced when bitter-tasting compounds, such as propiverine hydrochloride, are administered orally. Propiverine hydrochloride is an example of a drug with a bitter taste, used for the treatment of overactive bladders.

Objective: This study tested whether propiverine free base palatability and aqueous solubility could be improved by crystalline complex formation.

Materials and methods: We used 42 compounds, and found 9 new propiverine crystalline complexes. The properties and solubility of these complexes were studied using a range of techniques. A taste perception study was carried out using a taste sensor to evaluate the taste masking ability of the crystalline complex formation.

Results: The melting points of the crystalline complexes were higher than that of propiverine. The dissolution rates of the crystalline complexes in aqueous buffer solution (pH 6.8) and in purified water were much faster than that of propiverine. Propiverine salicylic acid crystalline complex had substantially less bitterness than propiverine hydrochloride, which was extremely bitter.

Discussion: The present findings indicated that crystalline complex formation provided an effective approach to enhancing propiverine solubility, and to masking its bitter taste.

Conclusion: Crystalline complex formation represents a useful and valuable technique for the preparation of orally disintegrating tablets and improving patient compliance, even for substances with bitter tastes.     

Improvement of bone microarchitecture in methylprednisolone induced rat model of osteoporosis by using thiolated chitosan-based risedronate mucoadhesive film

Objective: In this study, we investigated the potential of thiolated chitosan-based mucoadhesive film, loaded with risedronate sodium in the treatment of osteoporosis.

Significance: Risedronate sodium is a bisphosphonate derivative having very low bioavailability when administered through the oral route. Moreover, the adverse effects associated with the drug when administered through GIT necessitate an alternative and feasible route which can improve its bioavailability and therapeutic efficacy.

Methods: Thiolation of chitosan was interpreted by different analytical techniques. The mucoadhesive films were prepared by the solvent evaporation method and evaluated for drug content analysis, swelling degree, mucoadhesive parameters, and permeation characterization. For the screening of preclinical efficacy and pharmacodynamic parameters, a methylprednisolone induced osteoporotic rat model was used. The trabecular microarchitecture and biochemical markers were evaluated for determination of bone resorption.

Results: The different analytical characterization of synthesized thiolated chitosan revealed that chitosan was successfully incorporated with thiol groups. The formulation containing 2:1 ratio of thiolated chitosan and HPMC-4KM was found to have the maximum swelling degree, mucoadhesive strength with a good force of adhesion and better in vitro permeability compared to the marketed formulation. With respect to trabecular microarchitecture, the drug-loaded film formulation showed superior and promising results. Furthermore, the film formulation also improved the serum level of biomarkers better than the marketed formulation.

Conclusions: The results significantly suggest that risedronate loaded novel mucoadhesive film formulation could be a logical approach in the therapeutic intervention of osteoporosis.     

Determining osmotic pressure of drug solutions by air humidity in equilibrium method

Objective: To establish a new osmotic pressure measuring method with a wide measuring range.

Method: The osmotic pressure of drug solutions is determined by measuring the relative air humidity in equilibrium with the solution. The freezing point osmometry is used as a control.

Results: The data obtained by the proposed method are comparable to those by the control method, and the measuring range of the proposed method is significantly wider than that of the control method.

Conclusion: The proposed method is performed in an isothermal and equilibrium state, so it overcomes the defects of the freezing point and dew point osmometries which result from the heterothermal process in the measurement, and therefore is not limited to diluted solutions.     

Combination of doxorubicin with harmine-loaded liposomes exerting synergistic antitumor efficacy

Context: Long-circulation (PEGLip), pH-sensitive (PEOzLip), and active targeted liposomes (PEG-TATLip)-loading doxorubicin (DOX) and harmine (HM) were prepared. Their physicochemical properties and antitumor effect were investigated.

Objectives: The aims of the present study were to evaluate synergistic antitumor efficacy.

Materials and methods: Liposomes were prepared by using thin-film dispersion, active drug-loading and target post-insertion method. Subsequently physiochemical properties including particle size distribution, zeta potential, entrapment efficiency (EE), drug-loading content and in-vitro release were determined. Besides, the in vitro cytotoxicity of free drugs and drug-loaded liposomes was explored by using a Sulforhodamine-B Staining assay and the combination index values (CI Value) were calculated. Finally, the cellular uptake experiments by MCF-7cells were carried out via flow cytometry.

Results and discussion: All liposomes enhanced the antitumor effect significantly compared to free drugs. Among liposomes, PEG-TATLip enhanced the antitumor effect significantly compared to others. DOX and HM had moderate synergism with CI Value 0.85 for free drugs, 0.81 for PEGLip, 0.72 for PEOzLip, and 0.84 for PEG-TATLip respectively when the weight ratio of two drugs was 1:2. Moreover, the similarity between DOX and HM such as physicochemical properties, in vitro release modes and in vitro uptake kinetics characteristics when they were in the same formulations proved it possible for them to be delivered together.

Conclusion: Active targeting liposomes were the most effective delivery system as compared with pH-sensitive and long circulation liposomes. Additionally, DOX and HM could be co-delivered in liposomes and they could play moderate synergism effect in antitumor efficacy.     

Development of a directly correlated Raman and uHPLC-MS content uniformity method for dry powder inhalers through statistical design,chemometrics and mathematical modeling

Context: Content uniformity (CU) is a critical quality attribute measured and monitored throughout the development and commercial supply of pharmaceutical products. Traditional high-performance liquid chromatography (HPLC) methods are time-consuming in both sample preparation and analysis. Thus, a rapid, nondestructive and preparation free spectroscopy based method such as Raman is preferred.

Objective: Multiple mathematical algorithms were used to establish robust and directly correlated Raman and ultra-HPLC-mass spectrometry (uHPLC-MS) CU methods for the rapid analysis of blends and agglomerates formulated for dry powder inhalers (DPIs).

Materials and Methods: Model samples included blends of caffeine and lactose; albuterol and lactose; and albuterol and lactose agglomerates. Design of experiments (DoE) was employed to optimize Raman spectra. Multivariate curve resolution (MCR) was leveraged to assess Raman method robustness. Mathematical modeling provided direct method to method correlation by allowing samples to be scanned first for Raman spectra and then dissolved for uHPLC-MS analysis. Several chemometric models were developed and evaluated for the quantitative analysis of CU.

Results: The DoE revealed Raman power and exposure time were negatively correlated when optimizing albuterol and caffeine spectra but positively correlated for lactose. MCR revealed regions in which small changes to power and time resulted in an 8–10% change in concentration predictions. A PCR model worked well for the analysis of caffeine blend samples and a PLS model worked best for both albuterol blends and agglomerates.

Discussion and Conclusion: Utilization of DoE, chemometrics and mathematical modeling provided a robust and directly correlated CU method for DPIs.     

Lubricant sensitivity in function of paddle movement in the forced feeder of a high-speed tablet press

Context: The negative impact of magnesium stearate (MgSt) on the hardness of tablets is a well-known phenomenon, but the influence of paddle movement in the forced feeder on the lubricant effect during tablet compression is often neglected.

Objective: The purpose of this research was to investigate the influence of paddle speed in the forced feeder on tablet tensile strength (TS).

Materials and methods: Mixtures of microcrystalline cellulose (MCC) and MgSt (0.5%) were blended using different methods (low & high shear). After blending, the formulations were compressed into tablets. All parameters of the tableting cycle were kept constant except the speed of the paddles in the forced feeder.

Results and discussion: The blending technique affected the sensitivity of the formulation to the paddle speed. The TS of pure MCC tablets did not change in function of paddle speed, while tablets prepared by low shear mixing became softer at higher paddle speed. The TS of tablets manufactured using the high-shear mixed blend was low and did not vary in function of paddle speed, suggesting that overlubrication already occurred during the initial blending step. Furthermore, analysis of the machine parameters allowed evaluation of the influence of the paddles on the flowability, initial packing, and compactability of the powder mixtures.

Conclusion: The results elucidated that during manufacturing of tablets using MgSt-containing blends care should not only be taken during the blending step prior to tableting, but also during the tableting process itself, as paddle speed can affect tablet TS, a critical quality attribute.     

Micellar solubilization of poorly water-soluble drugs: effect of surfactant and solubilizate molecular structure

Objective: This study aims to clarify the role of surfactant and drug molecular structures on drug solubility in micellar surfactant solutions.

Significance: (1) Rationale for surfactant selection is provided; (2) the large data set can be used for validation of the drug solubility parameters used in oral absorption models.

Methods: Equilibrium solubility of two hydrophobic drugs and one model hydrophobic steroid in micellar solutions of 19 surfactants was measured by HPLC. The drug solubilization locus in the micelles was assessed by UV spectrometry.

Results: Danazol is solubilized much more efficiently than fenofibrate by ionic surfactants due to ion–dipole interactions between the charged surfactant head groups and the polar steroid backbone. Drug solubilization increases linearly with the increase of hydrophobic chain length for all studied surfactant types. Addition of 1–3 ethylene oxide (EO) units in the head group of dodecyl sulfate surfactants reduces significantly the solubilization of both studied drugs and decreases linearly the solubilization locus polarity of fenofibrate. The locus of fenofibrate solubilization is in the hydrophobic core of nonionic surfactant micelles and in the palisade layer of ionic surfactant micelles.

Conclusions: Highest drug solubility can be obtained by using surfactants molecules with long chain length coupled with hydrophilic head group that provides additional drug–surfactant interactions (i.e. ion–dipole) in the micelles.     

N-octyl-N-arginine-chitosan micelles for gambogic acid intravenous delivery: characterization,cell uptake,pharmacokinetics, and biodistribution

Objective: The deeper research of N-octyl-N-arginine chitosan (OACS) as intravenous delivery was characterized, cell uptake study, pharmacokinetics, and biodistribution of OACS micelles (GA–OACS) were investigated.

Significance: Gambogic acid (GA) can inhibit the growth of various cancer cells. However, the short elimination half-life time and treatment without targeting limits its application. OACS was synthesized as delivery carrier for GA by us, but the deeper characterization of OACS, such as molecular modeling, pharmacokinetics, and biodistribution were not investigated.

Methods: Gambogic acid loaded OACS micelles (GA–OACS) were evaluated by the molecular modeling, characterized by TEM, DLS, IR, ¹HNMR, XRD. Confocal laser scanning microscope and flow cytometry were analyzed for cell uptake study. Imaging analysis was used to show the distribution of OACS in vivo directly, pharmacokinetics and biodistribution were also investigated.

Results: The molecular modeling result showed that GA could encapsulated stably in the core of OACS micelles. TEM, IR, ¹HNMR, and XRD also suggested that GA was encapsulated in amorphous form in the core of OACS micelles. AUC and elimination half-life of GA–OACS were all increased by 1.5-fold and 2.0-fold compared with GA–ARG in rat, respectively. Biodistribution study indicated that GA–OACS was distributed mainly in the liver. GA amount in the kidney and heart was greatly reduced in the GA–OACS group. From the imaging analysis, OACS distribution in the liver was the most.

Conclusions: OACS was an excellent carrier for GA intravenous delivery to prolong half-life. Moreover, OACS targeted on liver.     

RGD peptide targeted lipid-coated nanoparticles for combinatorial delivery of sorafenib and quercetin against hepatocellular carcinoma

Context: Combination therapies provide a potential solution to address the tumor heterogeneity and drug resistance issues by taking advantage of distinct mechanisms of action of the multiple therapeutics.

Objective: To design arginine-glycineaspartic acid (RGD) modified lipid-coated nanoparticles (NPs) for the co-delivery of the hydrophobic drugs against hepatocellular carcinoma (HCC).

Materials and methods: RGD modified lipid-coated PLGA NPs were developed for the targeted delivery of both sorafenib (SRF) and quercetin (QT) (RGD-SRF-QT NPs). Chemical–physical characteristics and release profiles were evaluated. In vitro cell viability assays were carried out on HCC cells. In vivo antitumor efficacies were evaluated in HCC animal model.

Results and discussion: The combination of SRF and QT formulations was more effective than the single drug formulations in both NPs and solution groups. RGD-SRF-QT NPs achieved the most significant tumor growth inhibition effect in vitro and in vivo.

Conclusion: The resulting NPs could provide a promising platform for co-delivery of multiple anticancer drugs for achievement of combinational therapy and could offer potential for enhancing the therapeutic efficacy on HCC.     

Influence of different polymers on crystallization tendency and dissolution behavior of cilnidipine in solid dispersions

Context: Cilnidipine (CN) is a novel dihydropyridine calcium antagonist that is practically insoluble in aqueous media and exhibits a low oral bioavailability or limited clinical efficacy.

Objective: This study investigated the effects of three commercial and chemically diverse polymers – PVP, PVP/VA and Soluplus – on crystallization tendency and in vitro dissolution profiles of CN in order to determine an optimum carrier for composing the preferred solid dispersion (SD) of CN.

Methods: All these co-evaporated systems were characterized up to 3 months by thermoanalytical (DSC), crystallographic (POM, PXRD), microscopic (SEM) and spectroscopic (FTIR) techniques.

Results: The results showed that the polymers could be sorted by their effects of inhibiting CN crystallization in the ascending order: Soluplus, PVP/VA, PVP. The sequence was in accordance with that of the strength of drug–polymer hydrogen bonds revealed by FTIR spectra. It could be ascribed to relative hydrogen-bonding acceptor strengths of N-vinylpyrrolidone moiety in the polymer molecules. On the other hand, all the SDs showed enhanced dissolution profiles compared to pure CN alone. On their effects of enhancing CN dissolution, the polymers could be sorted in the descending order: Soluplus, PVP, PVP/VA.

Conclusions: It implied that the dissolution behavior of CN could bear a close relationship to both hydration capacity and hydrogen-bonding interaction tendency of moieties of the polymers. It might suggest an optimal formulation for CN comprising both PVP and Soluplus.     

Multicomponent crystals of gliclazide and tromethamine: preparation,physico-chemical,and pharmaceutical characterization*

Objective: To improve the pharmaceutical behavior of the oral antidiabetic agent gliclazide through the synthesis of multicomponent crystals with tromethamine.

Methods: Multicomponent crystals were prepared by solvent evaporation method, kneading, and combining mechanical and thermal activation. DSC, FT-IR spectroscopy, X-ray diffraction, SEM-EDS, and SSNMR were used to investigate their formation. Measurements of solubility and dissolution rate were carried out for the pharmaceutical characterization.

Results: The formation of multicomponent crystals of gliclazide and tromethamine was confirmed by all the techniques. In particular, FT-IR and NMR measurements revealed that the interaction between drug and coformer leads to significant changes of the hydrogen bond scheme, and that almost all the functional groups of the two molecules are involved. The dissolution profile of the new phase is significantly better than that of both pure gliclazide and of the reference commercial product Diabrezide^®.

Conclusions: The new system shows an improved pharmaceutical behavior and could be formulated in a dosage form to obtain a rapid and complete release of the drug available for absorption.     

New nanomicelle curcumin formulation for ocular delivery: improved stability,solubility, and ocular anti-inflammatory treatment

Context: A stable topical ophthalmic curcumin formulation with high solubility, stability, and efficacy is needed for pharmaceutical use in clinics.

Objectives: The objective of this article was to describe a novel curcumin containing a nanomicelle formulation using a polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol (PVCL–PVA–PEG) graft copolymer.

Methods: Nanomicelle curcumin was formulated and optimized and then further evaluated for in vitro cytotoxicity/in vivo ocular irritation, in vitro cellular uptake/in vivo corneal permeation, and in vitro antioxidant activity/in vivo anti-inflammatory efficacy.

Results: The solubility, chemical stability, and antioxidant activity were greatly improved after the encapsulation of the PVCL–PVA–PEG nanomicelles. The nanomicelle curcumin ophthalmic solution was simple to prepare and the nanomicelles are stable to the storage conditions, and it had good cellular tolerance. Nanomicelle curcumin also had excellent ocular tolerance in rabbits. The use of nanomicelles significantly improved in vitro cellular uptake and in vivo corneal permeation as well as improved anti-inflammatory efficacy when compared with a free curcumin solution.

Conclusions: These findings indicate that nanomicelles could be promising topical delivery systems for the ocular administration of curcumin.     

Mechanical and electrical properties of electrospun CNT/PVDF nanofiber for micro-actuator applications

Electrospun polyvinylidene fluoride (PVDF)-containing carbon nanotubes (CNT) were prepared for use in fabricating actuator materials. Actuating displacement was measured in an electrochemical environment. The electrospun nanofibers were arranged using a drum-type collector, and morphology was investigated using a field emission-scanning electron microscope. The uniformity of dispersion of CNT in the PVDF nanofibers was monitored by electron probe X-ray micro-analysis. Tensile strength and electrical resistivity results were used as an indication of the state of alignment. The electrospun CNT/PVDF nanofiber sheets exhibited better mechanical and electrical properties in the arranged direction. The efficiency and electrical capacities of electrospun CNT/PVDF nanofiber sheet were compared with those of cast PVDF sheets for use in actuator applications in electrochemical environments. The electrospun CNT/PVDF nanofiber sheets exhibited much better actuator performance than PVDF sheets, which are attributed to their superior electrical properties.

Highlights

(1) The interfacial durability of CNT/PVDF nanofibers was enhanced to increase contact area by reinforcing CNT.

(2) The efficiency of CNT/PVDF actuators was improved due to interfacial properties.

(3) Thin thickness drum-type collector was made to enhance nanofiber alignment.

(4) The arranged CNT/PVDF nanofibers exhibited better mechanical and actuating displacements.