Urea-assisted hydrothermal synthesis of MnMoO4/MnCO3 hybrid electrochemical electrode and fabrication of high-performance asymmetric supercapacitor

Transition metal molybdates/carbonates and hybrid nanomaterials have attracted great attention in en-ergy storage applications because of their enriched redox a...     

Three-dimensional heterostructured MnO2/graphene/carbon nanotube composite on Ni foam for binder-free supercapacitor electrode

In this article, three-dimensional (3D) heterostructured of MnO₂/graphene/carbon nanotube (CNT) composites were synthesized by electrochemical deposition (ELD)-electrophoretic deposition (EPD) and subsequently chemical vapour deposition (CVD) methods. MnO₂/graphene/CNT composites were directly used as binder-free electrodes to investigate the electrochemical performance. To design a novel electrode material with high specific area and excellent electrochemical property, the Ni foam was chosen as the substrate, which could provide a 3D skeleton extremely enhancing the specific surface area and limiting the huge volume change of the active materials. The experimental results indicated that the specific capacitance of MnO₂/graphene/CNT composite was up to 377.1 F g^?1 at the scan speed of 200 mV s^?1 with a measured energy density of 75.4 Wh kg^?1. The 3D hybrid structures also exhibited superior long cycling life with close to 90% specific capacitance retained after 500 cycles.     

NiCo2S4 nanoparticles grown on reduced graphene oxides for high-performance asymmetric supercapacitors

The nanostructures of reduced graphene oxide (rGO)/NiCo₂S₄ are prepared using the simple hydrothermal method and the thermal treatment process, which could provide good conductivity and ideal specific surface area. The rGO/NiCo₂S₄ electrode shows a maximum specific capacitance of 1059 F g⁻¹, excellent rate capability, and good cycle life. Furthermore, the three dimensional structures of rGO/MnO (3D rGO/MnO) are also synthesized by the hydrothermal method and the thermal treatment process, which have the high specific surface area and good conductivity. The rGO/MnO electrode exhibits a maximum specific capacitance of 469 F g⁻¹. A rGO/MnO//rGO/NiCo₂S₄ asymmetric supercapacitors (ASC) is assembled using 2 M KOH solution as electrolyte, rGO/NiCo₂S₄ as positive electrode and rGO/MnO as negative electrode. The rGO/MnO//rGO/NiCo₂S₄ ASC shows an energy density of 38.8 Wh kg⁻¹ at a power density of 0.4 kW kg⁻¹ and a good cycle life, which provides a possibility toward actual application in energy-storage systems.     

Preparation of amorphous cobalt/carbon nanofibers composite as binder-free and conductive-free electrode materials for high supercapacitor

One dimensional carbon nanofibers embedded amorphous cobalt oxide with high electrochemical performances were successfully prepared by electrospinning Co(NO₃)₂ in PAN/DMF solution followed by a high-temperature heat treatment process. The different molar ratio of AN/Co(NO₃)₂ were synthesis. The optimized Co/CNFs(30), in which the molar ratio of AN/Co(NO₃)₂ was 30/1, exhibited a specific capacitance of 1096 F g^?1 at 1 A g^?1 and almost no decay in specific capacitance after cycling 2500 times at 5 A g^?1. The Co/CNFs were characterized by scanning electron microscopy, X-ray diffraction, Raman, transmission electron microscopy, X-ray photoelectron spectroscopy, thermal-gravity-analysis and the N₂ adsorption–desorption. The result showed that cobalt element was successfully dispersed in the carbon nanofibers with an amorphous state.     

Spin-coated silicon nanoparticle/graphene electrode as a binder-free anode for high-performance lithium-ion batteries

Si has been considered as a promising anode material but its practical application has been severely hindered due to poor cyclability caused by the large volume change during charge/discharge. A new and effective protocol has been developed to construct Si nanoparticle/graphene electrodes with a favorable structure to alleviate this problem. Starting from a stable suspension of Si nanoparticles and graphene oxide in ethanol, spin-coating can be used as a facile method to cast a spin-coated Si nanoparticle/graphene (SC-Si/G) film, in which graphene can act as both an efficient electronic conductor and effective binder with no need for other binders such as polyvinylidenefluoride (PVDF) or polytetrafluoroethylene (PTFE). The prepared SC-Si/G electrode can achieve a high-performance as an anode for lithium-ion batteries benefiting from the following advantages: i) the graphene enhances the electronic conductivity of Si nanoparticles and the void spaces between Si nanoparticles facilitate the lithium ion diffusion, ii) the flexible graphene and the void spaces can effectively cushion the volume expansion of Si nanoparticles. As a result, the binder-free electrode shows a high capacity of 1611 mA·h·g^?1 at 1 A·g^?1 after 200 cycles, a superior rate capability of 648 mA·h·g^?1 at 10 A·g^?1, and an excellent cycle life of 200 cycles with 74% capacity retention.      

高性能超级电容器有序中孔炭材料的研制

采用微湿含浸法制备了一系列具有不同比表面积和孔径分布的超级电容器有序中孔炭材料。采用液氮吸附脱附等温线、小角XRD以及TEM表征了有序中孔炭的孔结构,在1MEt4NBF4|PC电解液中测试了其电化学性能。结果表明,所制得的有序中孔炭的BET比表面积随糠醇加入量的增加先增加后减小,糠醇加入量少制得具有CMK-5结构的有序中孔炭,加入量多制得的CMK-3结构。电化学性能测试结果表明,在1mA·cm-2的充放电电流密度下各有序中孔炭材料比电容的大小顺序与其BET比表面积的大小顺序基本一致,具有CMK-3结构的有序中孔炭的倍率性能最好,并且也好于无序中孔炭的。     

Design and preparation of NiCoS nanostructures on Ni foam for high-performance asymmetric supercapacitor application

Journal of Materials Science: Materials in Electronics - Supercapacitors are progressively being utilized for storage systems in sustainable nanotechnologies. A NiCoS nanostructure was synthesized...     

无定型氧化锰超级电容器电极材料

采用化学共沉淀法制备超级电容器用氧化锰电极材料,借助X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(FT-IR)和BET比表面积分析手段对样品进行表征。结果表明,产物为无定型结构,粒径分布较均匀,约在40～50nm,BET比表面积达到160．5m^2／g。在0．5mol／LK2SO4水溶液中,电位窗口为0～0．8V(vs.SCE)内,通过循环伏安和恒流充放电测试,显示该材料制备的电极具有良好的电容行为和功率特性。在扫描速度为4mV／s时,单电极的比容量达到140F／g。     

Ultrathin ZnS nanosheet/carbon nanotube hybrid electrode for high-performance flexible all-solid-state supercapacitor

Flexible and easily reconfigurable supercapacitors show great promise for application in wearable electronics.In this study,multiwall C nanotubes (CNTs) decorated with hierarchical ultrathin zinc sulfide (ZnS) nanosheets (ZnS@CNT) are synthesized via a facile method.The resulting ZnS@CNT electrode,which delivers a high specific capacitance of 347.3 F·g-1 and an excellent cycling stability,can function as a high-performance electrode for a flexible all-solid-state supercapacitor using a polymer gel electrolyte.Our device exhibits a remarkable specific capacitance of 159.6 F·g-1,a high energy density of 22.3 W·h·kg-1 and a power density of 5 kW·kg-1.It also has high electrochemical performance even under bending or twisting.The all-solid-state supercapacitors can be easily integrated in series to power different commercial light-emitting diodes without an external bias voltage.     

Novel electrode design of three-dimensional carbon foam modified with MnO2 nanosheet arrays for high-performance quasi-solid supercapacitor

Journal of Materials Science: Materials in Electronics - In recent years, as a flexible electrode material, melamine foam has attracted more and more attention from researchers in the field of...     

MnO2/carbon nanotube free-standing electrode recycled from spent manganese-oxygen battery as high-performance supercapacitor material

Journal of Materials Science - Metal–oxygen batteries have been growing rapidly as an energy storage technology in light of their high specific energy density. However, waste...     

CTAB-templated formation of CuCo2O4/CuO nanorods and nanosheets for high-performance supercapacitor applications

Journal of Materials Science: Materials in Electronics - In the present work, Copper cobaltites (CuCo2O4) were efficiently developed by the CTAB-assisted sonochemical process succeeded by...     

The AMWCNTs supported porous nanocarbon composites for high-performance supercapacitor

The porous nanocarbons supported by acid-treated multiwall carbon nanotubes (PC@ACNTs) were prepared by the combination of the hydrothermal polymerization of glucose on ACNTs, carbonization under N₂ protection and final activation with ZnCl₂. The materials were characterized by transmission electron microscopy, X-ray powder diffraction and Raman spectra. The results indicated that the ACNTs distributed uniformly into the framework of the porous carbon. The composites showed the high BET specific surface area up to 1712 m² g⁻¹ and good conductivity. The electrochemical measurements indicated that the composites processed good performances for electrochemical energy storage (210 F g⁻¹ at 0.5 A g⁻¹), and high stability (>99.9%), much higher than the corresponding ACNTs, porous carbons and the samples prepared by using raw MWCNTs as source. The good performance of PC@ACNTs composites was relative with the synergy of good conductivity of ACNTs and large specific surface areas of PC.     

ZIF-67/rGO/NiPc composite electrode material for high-performance asymmetric supercapacitors

In this reported study, novel multiple dimensional ZIF-67/rGO/NiPc composite materials were prepared for supercapacitors. The electrochemical test showed that the ZIF-67/rGO/NiPc electrode achieved a remarkable specific capacitance of 860 F g^?1 at a current density of 1 A g^?1, which was superior to that of the rGO/NiPc and ZIF-67/rGO electrodes. An asymmetric supercapacitor based on ZIF-67/rGO/NiPc//activated carbon exhibited a high specific capacitance of 200.67 F g^?1 and an extraordinary energy density of 62.7 Wh kg^?1 at a corresponding power density of 750 W kg^?1. In addition, the device demonstrated 94.6% capacitance retention after 5000 cycles. The assembled asymmetric supercapacitors could easily powered a green light-emitting diode. This work revealed a promising research route for the rational construction of multiple dimensioned high-performance electrodes materials for use in new energy storage devices.

     

Co2SnO4/activated carbon composite electrode for supercapacitor

A new kind of Co₂SnO₄-based electrode materials for supercapacitor was synthesized by co-precipitation method. The microstructure and surface morphology of Co₂SnO₄ were characterized by X-ray diffraction and scanning electron microscopy, respectively. Cyclic voltammetry, chronopotentiometry and electrochemical impedance spectroscopy were employed for the determination of specific capacitance and the equivalent series resistance of Co₂SnO₄/activated carbon composite electrode in KCl solution. It was shown that the composite electrode with 25 wt% Co₂SnO₄ had excellent specific capacitance up to 285.3 F g⁻¹ at the current density of 5 mA cm⁻². In addition, the composite electrode exhibited excellent long-term stability and, after 1000 cycles, 70.6% of initial capacitance was retained. Regarding the low cost, easy preparation, steady performance and environment friendliness, Co₂SnO₄/activated carbon composite electrode could have potentially promising application for supercapacitor.     

Facile synthesis of graphene@NiMoO<Subscript>4</Subscript> nanosheet arrays on Ni foam for a high-performance asymmetric supercapacitor

Honeycomb-like NiMoO₄ with nanosheet arrays is grown on reduced graphene oxide, which is supported on Ni foam having successfully fabricated by a simple hydrothermal treatment followed by a calcined process. In the as-synthesized Ni foam@reduced graphene oxide@NiMoO₄, Ni foam served as “skeleton” to support reduced graphene oxide and reduced graphene oxide directly grown on Ni foam served as the “skin” to provide high passway of electrons and ions, which simultaneously accommodated the volume change during the process of charge–discharge and NiMoO₄ acted as active substance to provide high areal capacitance. It shows a high areal capacitance of 2165.9 mF cm^?2 at a current density of 1 mA cm^?2 and long cycle stability with 93.8% capacitance retained over 1000 charge–discharge cycles. Moreover, an asymmetric supercapacitor has been constructed by using Ni foam@reduced graphene oxide and Ni foam@reduced graphene oxide@NiMoO₄ as negative and positive electrodes. The energy density of this asymmetric supercapacitor is 0.579 mWh cm^?2, and it retains 93.1% capacitance over charge–discharge 5000 cycles. Therefore, it reveals great promise for practical applications in energy storage devices.     

Hierarchical micro- and mesoporous carbide-derived carbon as a high-performance electrode material in supercapacitors

Ordered mesoporous carbide-derived carbon (OM-CDC) materials produced by nanocasting of ordered mesoporous silica templates are characterized by a bimodal pore size distribution with a high ratio of micropores. The micropores result in outstanding adsorption capacities and the well-defined mesopores facilitate enhanced kinetics in adsorption processes. Here, for the first time, a systematic study is presented, in which the effects of synthesis temperature on the electrochemical performance of these materials in supercapacitors based on a 1 M aqueous solution of sulfuric acid and 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid are reported. Cyclic voltammetry shows the specific capacitance of the OM-CDC materials exceeds 200 F g(-1) in the aqueous electrolyte and 185 F g(-1) in the ionic liquid, when measured in a symmetric configuration in voltage ranges of up to 0.6 and 2 V, respectively. The ordered mesoporous channels in the produced OM-CDC materials serve as ion-highways and allow for very fast ionic transport into the bulk of the OM-CDC particles. At room temperature the enhanced ion transport leads to 75% and 90% of the capacitance retention at current densities in excess of ～10 A g(-1) in ionic liquid and aqueous electrolytes, respectively. The supercapacitors based on 250-300 μm OM-CDC electrodes demonstrate an operating frequency of up to 7 Hz in aqueous electrolyte. The combination of high specific capacitance and outstanding rate capabilities of the OM-CDC materials is unmatched by state-of-the art activated carbons and strictly microporous CDC materials.     

Flexible Zn2SnO4/MnO2 core/shell nanocable-carbon microfiber hybrid composites for high-performance supercapacitor electrodes

We demonstrate the design and fabrication of a novel flexible nanoarchitecture by facile coating ultrathin (several nanometers thick) films of MnO2 to highly electrical conductive Zn2SnO4 (ZTO) nanowires grown radially on carbon microfibers (CMFs) to achieve high specific capacitance, high-energy density, high-power density, and long-term life for supercapacitor electrode applications. The crystalline ZTO nanowires grown on CMFs were uniquely served as highly conductive cores to support a highly electrolytic accessible surface area of redox active MnO2 shells and also provide reliable electrical connections to the MnO2 shells. The maximum specific capacitances of 621.6 F/g (based on pristine MnO2) by cyclic voltammetry (CV) at a scan rate of 2 mV/s and 642.4 F/g by chronopotentiometry at a current density of 1 A/g were achieved in 1 M Na2SO4 aqueous solution. The hybrid MnO2/ZTO/CMF hybrid composite also exhibited excellent rate capability with specific energy of 36.8 Wh/kg and specific power of 32 kW/kg at current density of 40 A/g, respectively, and good long-term cycling stability (only 1.2% loss of its initial specific capacitance after 1000 cycles). These results suggest that such MnO2/ZTO/CF hybrid composite architecture is very promising for next generation high-performance supercapacitors.