A PSO‐based maximum power point tracking for photovoltaic systems under environmental and partially shaded conditions

To increase the efficiency of photovoltaic (PV) systems, maximum power point (MPP) tracking of the solar arrays is needed. Solar arrays output power depends on the solar irradiance and temperature. Also the mismatch phenomenon caused by partial shade will affect the output power of solar systems and lead to the incorrect operation of conventional MPP tracker. Under partially shaded conditions, the solar array power–current characteristic has multiple maximum. This paper presents a maximum power point tracking (MPPT) with particle swarm optimization method for PV systems under partially shaded condition. The performance of the proposed method is compared with perturb and observe (P&O), improved P&O, voltage‐based maximum power point tracking and current‐based maximum power point tracking algorithms, especially, under partially shaded condition. Simulation results confirm that proposed MPPT algorithm with high accuracy can track the peak power point under different insolation, temperature and partially shaded conditions, and it has the best performance in comparison with four mentioned MPPT algorithms. Also under rapidly changing atmospheric conditions, the P&O algorithm is diverged. Copyright © 2013 John Wiley & Sons, Ltd.     

Experimental Performance of MPPT Algorithm for Photovoltaic Sources Subject to Inhomogeneous Insolation

Photovoltaic (PV) power system performance depends on local irradiance conditions. PV systems are sometimes subject to partial shading, which may produce a nonideal characteristic curve, presenting true and local power maxima in the P -I curve. Traditional maximum power point tracking (MPPT) algorithms can converge to local maximum, which is not the true MPP. In order to solve the problem, this paper investigates the effects of nonuniform solar irradiance distribution on a PV source. An MPPT algorithm that is able to optimize the source instantaneous operating power under nonuniform irradiance is proposed. The ability of the algorithm and its increased performance with respect to traditional algorithms are evaluated by means of experimental tests performed on a real PV power system.     

Grid-Connected Photovoltaic Multistring PCS With PV Current Variation Reduction Control

In this paper, a grid-connected photovoltaic (PV) multistring power conditioning system with PV input current reduction control is proposed. An improved maximum power point tracking (MPPT) method for the multistring converter is suggested. The suggested MPPT algorithm tracks the maximum power point even though measurement errors exist. To reduce the PV current variation introduced by the inverter, a PV current variation reduction control is suggested. This PV current variation reduction control reduces the PV current variation without additional components. The low current variation reduces the filter size and improves the MPPT efficiency. All algorithms and controllers are implemented on a single-chip microcontroller. Experimental results obtained on a 3-kW prototype show high performance such as a MPPT efficiency of 99.7%, an almost unity power factor, a power efficiency of 96.7%, and a total harmonic distortion of 2.0%.     

An enhanced scanning-based MPPT approach for DMPPT systems

In this paper, an improved maximum power point tracking (MPPT) approach being low parameter dependency, simple structure and limited search interval has been presented for distributed MPPT photovoltaic (PV) systems. Basically, this approach is based on scanning of power–voltage (P-V) characteristic curve of PV modules in a limited duty ratio interval which makes tracking operation simple, fast and efficiently available in both uniform irradiance and partial shading conditions (PSCs). By limiting the scanning interval of maximum and minimum values of duty ratio via some analyses related to P-V characteristic for PSCs, global MPPT (GMPPT) is achieved in an efficient way. So as to validate performance of the proposed approach, a single-ended primary inductance converter has been used in both simulation and experimental studies. PV simulator has been used as a PV source to obtain different module characteristics with different number of bypass diodes and PV power levels. Both simulation and experimental results clarify that improved MPPT approach realises GMPPT effectively. Due to the high performance results, this approach can be an alternative technique in module-integrated converters, smart modules and PV power optimisers in which single module is used.     

局部阴影下光伏阵列最大功率点跟踪算法的研究

在局部阴影条件下,光伏阵列的功率-电压（P-V）特性曲线呈现多峰现象,传统的最大功率点跟踪方法容易受困于局部最大功率点,造成输出功率的损失。提出了基于布谷鸟搜索算法（cuckoo search,CS）的MPPT新方法,利用Lévy飞行搜索机制快速、有效的跳出局部最优的束缚,完成对全局最大功率点的跟踪。仿真和实验验证了该方法的可行性和有效性。     

A Variable Step Size INC MPPT Method for PV Systems

Maximum power point tracking (MPPT) techniques are employed in photovoltaic (PV) systems to make full utilization of PV array output power which depends on solar irradiation and ambient temperature. Among all the MPPT strategies, the incremental conductance (INC) algorithm is widely used due to the high tracking accuracy at steady state and good adaptability to the rapidly changing atmospheric conditions. In this paper, a modified variable step size INC MPPT algorithm is proposed, which automatically adjusts the step size to track the PV array maximum power point. Compared with the conventional fixed step size method, the proposed approach can effectively improve the MPPT speed and accuracy simultaneously. Furthermore, it is simple and can be easily implemented in digital signal processors. A theoretical analysis and the design principle of the proposed method are provided and its feasibility is also verified by simulation and experimental results.     

Real-Time Identification of Optimal Operating Points in Photovoltaic Power Systems

Photovoltaic power systems are usually integrated with some specific control algorithms to deliver the maximum possible power. Several maximum power point tracking (MPPT) methods that force the operating point to oscillate have been presented in the past few decades. In the MPPT system, the ideal operation is to determine the maximum power point (MPP) of the photovoltaic (PV) array directly rather than to track it by using the active operation of trial and error, which causes undesirable oscillation around the MPP. Since the output features of a PV cell vary with environment changes in irradiance and temperature from time to time, real-time operation is required to trace the variations of local MPPs in PV power systems. The method of real-time estimation proposed in this paper uses polynomials to demonstrate the power–voltage relationship of PV panels and implements the recursive least-squares method and Newton–Raphson method to identify the voltage of the optimal operating point. The effectiveness of the proposed methods is successfully demonstrated by computer simulations and experimental evaluations of two major types of PV panels, namely: 1) crystalline silicon and 2) copper–indium–diselenide thin film.     

基于DSP的改进PSO光伏阵列MPPT控制应用

为了解决光伏（PV）系统在局部阴影条件下（PSC）的最大功率点跟踪问题,提出了一种基于改进粒子群算法（PSO）的快速最大功率点跟踪（MPPT）方法。与传统基于PSO的MPPT系统不同的是,采用了基于转换器电流动态行为的变量抽样时间策略（VSTS）,并且为了更快速的实现最大功率点跟踪,引入三个重要因数,即：粒子数、收敛速度以及抽样时间。采用DSP平台对提出系统进行了具体实现和性能评估,实验结果显示相比其他类似系统,在不同条件（包括PSC）下,提出算法均能够实现速度跟踪且精确度较高。     

基于GA BPNN的MPPT控制方法与P&O的比较

针对传统光伏电池阵列控制方式在复杂天气环境下,对最大功率点跟踪效果不理想的现象。设计了一种基于GA BPNN的改进型恒压光伏MPPT控制算法,并通过搭建基于GA BPNN的改进型恒压光伏MPPT的仿真模型,再与传统P&O控制方法进行比较分析。仿真结果证明,该算法能准确快速地在复杂天气环境下进行最大功率点跟踪,且性能稳定。     

Short-current pulse-based maximum-power-point tracking method formultiple photovoltaic-and-converter module system

This paper proposes a novel maximum-power-point tracking (MPPT) method with a simple algorithm for photovoltaic (PV) power generation systems. The method is based on use of a short-current pulse of the PV to determine an optimum operating current where the maximum output power can be obtained and completely differs from conventional hill-climbing-based methods. In the proposed system, the optimum operating current is instantaneously determined simply by taking a product of the short-current pulse amplitude and a parameter k because the optimum operating current is exactly proportional to the short current under various conditions of illuminance and temperature. Also, the system offers an identification capability of k by means of fast power-versus-current curve scanning, which makes the short-current pulse-based MPPT method adaptive to disturbances such as shades partially covering the PV panels and surface contamination. The above adaptive MPPT algorithm has been introduced into a current-controlled boost chopper and a multiple power converter system composed of PV-and-chopper modules. Various operating characteristics have experimentally been examined on this multiple PV-and-chopper module system from a practical viewpoint and excellent MPPT performance has been confirmed through the tests     

基于模糊控制的光伏并网逆变器MPPT控制研究

最大功率点跟踪控制的目的是为了将光伏阵列发出的最大能量实时地提供给负载,使光伏发电系统的能量利用率达到最大。在光伏阵列产生电能的应用中,有许多不确定因素,如太阳光照强度、光伏阵列温度的变化、负载的变化、光伏阵列输出特性的非线性,则建立模型分析光伏阵列输出最大功率要考虑很多的因素。从模糊控制技术的分析中知道,模糊控制不需要对被控对象建立精确的数学模型,是一种相对简单的智能控制方法,对处理非线性问题有很好的效果。因此,用模糊控制法来实现MPPT可以得到比较好的效果。本文基于此研究了光伏阵列的非线性功率输出特性,建立了基于Matlab simulink/Power system的光伏阵列仿真模型,对基于模糊控制采用扰动观察法进行光伏发电最大功率点跟踪进行了仿真验证。     

Comparative study of maximum power point tracking algorithms

Maximum power point trackers (MPPTs) play an important role in photovoltaic (PV) power systems because they maximize the power output from a PV system for a given set of conditions, and therefore maximize the array efficiency. Thus, an MPPT can minimize the overall system cost. MPPTs find and maintain operation at the maximum power point, using an MPPT algorithm. Many such algorithms have been proposed. However, one particular algorithm, the perturb‐and‐observe (P&O) method, claimed by many in the literature to be inferior to others, continues to be by far the most widely used method in commercial PV MPPTs. Part of the reason for this is that the published comparisons between methods do not include an experimental comparison between multiple algorithms with all algorithms optimized and a standardized MPPT hardware. This paper provides such a comparison. MPPT algorithm performance is quantified through the MPPT efficiency. In this work, results are obtained for three optimized algorithms, using a microprocessor‐controlled MPPT operating from a PV array and also a PV array simulator. It is found that the P&O method, when properly optimized, can have MPPT efficiencies well in excess of 97%, and is highly competitive against other MPPT algorithms. Copyright © 2002 John Wiley & Sons, Ltd.     

一种基于Boost电路的光伏最大功率跟踪方法

最大功率跟踪(MPPT)是太阳能光伏发电的重要组成部分,依靠最大功率跟踪可使光伏电池工作在最大功率点(MPP)附近,提高太阳能的利用率.在分析光伏电池的数学模型的基础上,选用Boost电路作为DC/DC变换来搭建仿真模型;针对传统的定步长扰动观测法存在的震荡和误判现象,提出一种改进的扰动观测法,并在Matlab/Simulink环境下进行了仿真.与定步长的扰动观测法的仿真结果进行对比,表明该算法的响应速度更加迅速;在外界环境发生变化时,该算法能够快速做出判断,准确地跟踪到光伏电池的最大功率点.     

基于双并联Boost电路的光伏系统最大功率点跟踪控制方法

光伏电池的输出功率取决于外界环境（温度和光照条件）和负载状况,需采用最大功率点跟踪（MPPT）电路,才能使光伏电池始终输出最大功率,从而充分发挥光伏器件的光电转换效能.在比较了常用光伏发电系统控制的优缺点后,依据MPPT控制算法的基本工作原理,主电路采用双并联Boost电路,具有电压提升功能,并且能够提高DC-DC环节的额定功率和减小直流母线电压的纹波.针对传统扰动观察法存在的振荡和误判问题,提出了一种新型的基于双并联Boost电路的改进扰动观察法最大功率跟踪策略.在Matlab/Simulink下进行了建模与仿真,仿真结果表明,当外界环境发生变化时,系统能快速准确跟踪此变化,避免算法误判现象的发生,通过改变当前的负载阻抗,使之与光伏电池的输出阻抗等值相匹配采满足最大功率输出的要求,使系统始终工作在最大功率点处,并且在最大功率点处具有很好的稳态性能.最后通过实验验证了该算法的有效性.     

Analytical study and evaluation results of power optimizers for distributed power conditioning in photovoltaic arrays

The use of modular or ‘micro’ maximum power point tracking (MPPT) converters at module level in series association, commercially known as “power optimizers”, allows the individual adaptation of each panel to the load, solving part of the problems related to partial shadows and different tilt and/or orientation angles of the photovoltaic (PV) modules. This is particularly relevant in building integrated PV systems. This paper presents useful behavioural analytical studies of cascade MPPT converters and evaluation test results of a prototype developed under a Spanish national research project. On the one hand, this work focuses on the development of new useful expressions which can be used to identify the behaviour of individual MPPT converters applied to each module and connected in series, in a typical grid‐connected PV system. On the other hand, a novel characterization method of MPPT converters is developed, and experimental results of the prototype are obtained: when individual partial shading is applied, and they are connected in a typical grid connected PV array. Copyright © 2011 John Wiley & Sons, Ltd.     

Flyback Inverter Controlled by Sensorless Current MPPT for Photovoltaic Power System

This paper presents a flyback inverter controlled by sensorless current maximum power point tracking (MPPT) for a small photovoltaic (PV) power system. Although the proposed system has small output power such as 300 W, a few sets of small PV power systems can be easily connected in parallel to yield higher output power. When a PV power system is constructed with a number of small power systems, the total system cost will increase and will be a matter of concern. To overcome this difficulty, this paper proposes a PV system that uses no expensive dc current sensor but utilizes the method of estimating the PV current from the PV voltage. The paper shows that the application of this novel sensorless current flyback inverter to an MPPT-operated PV system exhibits satisfactory MPPT performance similar to the one exhibited by the system with a dc current sensor as well. This paper also deals with the design method and the operation of the unique flyback inverter with center-tapped secondary winding.     

A low‐cost photovoltaic emulator for static and dynamic evaluation of photovoltaic power converters and facilities

In testing maximum power point tracking (MPPT) algorithms running on electronic power converters for photovoltaic (PV) applications, either a PV energy source (PV module or PV array) or a PV emulator is required. With a PV emulator, it is possible to control the testing conditions with accuracy so that it is the preferred option. The PV source is modeled as a current source; thus, the emulator has to work as a current source dependent on its output voltage. The proposed emulator is a buck converter with an average current mode control loop, which allows testing the static and dynamic performance of PV facilities up to 3 kW. To validate the concept, the emulator is used to evaluate the MPPT algorithm of a 230‐W experimental microinverter working from a single PV module. Copyright © 2012 John Wiley & Sons, Ltd.     

光伏电池最大功率跟踪算法的优化设计

光伏电池输出功率受到光照强度、温度和负载等因素的影响而变化,有必要对光伏电池进行最大功率跟踪。文中提出了新的扰动观察MPPT方法,该方法通过控制Boost变换器的占空比来实现最大功率的控制。该方法具有跟踪效率高、跟踪速度快、跟踪控制简单的优点,仿真验证了该方法的有效性。     

Performance evaluation of a MPPT controller with model predictive control for a photovoltaic system

ABSTRACT

Efficiency has been a major factor in the growth of photovoltaic (PV) systems. Different control techniques have been explored to extract maximum power from PV systems under varying environmental conditions. This paper evaluates the performance of a new improved control technique known as model predictive control (MPC) in power extraction from PV systems. Exploiting the ability of MPC to predict future state of controlled variables, MPC has been implemented for tacking of maximum power point (MPP) of a PV system. Application of MPC for maximum power point tracking (MPPT) has been found to result into faster tracking of MPP under continuously varying atmospheric conditions providing an efficient system. It helps in reducing unwanted oscillations with an increase in tracking speed. A detailed step by step process of designing a model predictive controller has been discussed. Here, MPC has been applied in conjunction with conventional perturb and observe (P&O) method for controlling the dc-dc boost converter switching, harvesting maximum power from a PV array. The results of MPC controller has been compared with two widely used conventional methods of MPPT, viz. incremental conductance method and P&O method. The MPC controller scheme has been designed, implemented and tested in MATLAB/Simulink environment and has also been experimentally validated using a laboratory prototype of a PV system.