Electrospun titania fibers by incorporating graphene/Ag hybrids for the improved visible-light photocatalysis

A novel graphene/Ag nanoparticles (NPs) hybrid (prepared by a physical method (PM)) was incorporated into electrospun TiO₂ fibers to improve visible-lightdriven photocatalytic properties. The experimental study revealed that the graphene/Ag NPs (PM) hybrid not only decreased the bandgap energy of TiO₂, but also enhanced its light response in the visible region due to the surface plasmon resonance (SPR) effect. In addition, compared with those of TiO₂ fibers incorporating the graphene/Ag NPs hybrid (prepared by a chemical method (CM)), TiO₂-graphene/Ag NPs (PM) fibers exhibited a higher surface photocurrent density and superior photocatalytic performance, i.e., the visible-light-driven photocatalytic activity was enhanced by 2 times. The main reasons include a lower surface defect density of the graphene/Ag NPs (PM) hybrid, a smaller particle size (10 nm) and a higher dispersity of Ag NPs, which promote the rapid transfer of photoexcited charge carriers and inhibit the recombination of photogenerated electrons and holes. It is expected that this kind of ternary electrospun fibers will be a promising candidate for applications in water splitting, solar cells, CO₂ conversion and optoelectronic devices, etc.     

Construction of hierarchical TiO<Subscript>2</Subscript> nanorod array/graphene/ZnO nanocomposites for high-performance photocatalysis

The photocatalytic performance of heterostructure photocatalysts is limited in practical use due to the charge accumulation at the interface and its low efficiency in utilizing solar energy during photocatalytic process. In this work, a ternary hierarchical TiO₂ nanorod arrays/graphene/ZnO nanocomposite is prepared by using graphene sheets as bridge between TiO₂ nanorod arrays (NRAs) and ZnO nanoparticles (NPs) via a facile combination of spin-coating and chemical vapor deposition techniques. The experimental study reveals that the graphene sheets provide a barrier-free access to transport photo-excited electrons from rutile TiO₂ NRAs and ZnO NPs. In addition, there generates an interface scattering effect of visible light as the graphene sheets provide appreciable nucleation sites for ZnO NPs. This synergistic effect in the ternary nanocomposite gives rise to a largely enhanced photocurrent density and visible light-driven photocatalytic activity, which is 2.6 times higher than that of regular TiO₂ NRAs/ZnO NPs heterostructure. It is expected that this hierarchical nanocomposite will be a promising candidate for applications in environmental remediation and energy fields.     

Synthesis,structural and optical properties of Ag doped ZnO nanoparticles with enhanced photocatalytic properties by photo degradation of organic dyes

In present paper chemical route based synthesis of Ag doped ZnO nanoparticles (NPs) by co-precipitation method is reported to develop ZnO NPs for photo catalytic application. XRD confirms the structural purity of ZnO NPs. FESEM and TEM study reveals the surface and ultra structure morphology of NPs. EDAX study confirms the purity and homogeneity of NPs. The Ag/ZnO NPs with different weight percentage of Ag relative to ZnO were applied under visible light irradiation for evaluating heterogeneous photo catalytic degradation of methylene blue (MB) and Brilliant blue (BB) respectively. The presence of Ag in ZnO enhance MB and BB dye degradation effectiveness from 96.78 to 98.66 and 82.15 to 97.36% for pure ZnO and maximum Ag doped ZnO (x?=?0.1) respectively. In comparison of MB and BB final degradation ability, MB dyes have more effective photo catalytic efficiency towards different oxidizing species to degradation process.     

Extension of optical properties of ZnO/SiO2 materials induced by incorporation of Au or NiO nanoparticles

Incorporating noble metal nanoparticles (NPs) and oxides has been proved to be an effective method to tune the optical properties of silica based materials. In this paper the optical and photocatalytic properties have been studied for ZnO/SiO₂ modified with Au or NiO nanoparticles. Changes in the optical properties of semiconductor ZnO particles have been observed due to the deposition of coloured Au and NiO nanoparticles by reducing the band gap energy and thus extending light absorption to visible domain. The excellent surface characteristics of NiO/ZnO/SiO₂ and Au/ZnO/SiO₂ favour the adsorption behaviour of these materials and limit the recombination of electron–holes pairs. Crystal Violet degradation under VIS light proved to have higher efficiency in the presence of Au/ZnO/SiO₂ (97%) than for NiO/ZnO/SiO₂ (60%).     

Facile synthesis of Ag/ZnO heterostructures assisted by UV irradiation: Highly photocatalytic property and enhanced photostability

We report a new method to synthesize Ag/ZnO heterostructures assisted by UV irradiation. The formation of Ag/ZnO heterostructures depends on photogenerated electrons produced by ZnO under UV light to reduce high valence silver. Functional property of the Ag/ZnO heterostructures is evaluated by photodegradation of methylene blue (MB) under UV illumination. Results of photodegradation tests reveal that the optimal photocatalytic activity of as-syntheszied samples is about 1.5 times higher than the pure ZnO synthesized in the same condition or commercial TiO₂ (P-25), showing the advantage of the unique structure in the Ag/ZnO heterostructure. Besides, due to the reduced activation of surface oxygen atom, photocatalytic activity of the photocatalysts has no evident decrease even after three recycles.     

Highly efficient visible light photocatalysis of novel CuS/ZnO heterostructure nanowire arrays

Here, a facile approach for the fabrication of CuS nanoparticle (NP)/ZnO nanowire (NW) heterostructures on a mesh substrate through a simple two-step solution method is demonstrated. Successive ionic layer adsorption and reaction (SILAR) was employed to uniformly deposit CuS NPs on the hydrothermally grown ZnO NW array. The synthesized CuS/ZnO heterostructure NWs exhibited superior photocatalytic activity under visible light compared to bare ZnO NWs. This strong photocatalytic activity under visible light is due to the interfacial charge transfer (IFCT) from the valence band of the ZnO NW to the CuS NP, which reduces CuS to Cu(2)S. After repeated cycles of photodecolorization of Acid Orange 7 (AO7), the photocatalytic behavior of CuS/ZnO heterostructure NWs exhibited no significant loss of activity. Furthermore, our CuS/ZnO NWs/mesh photocatalyst floats in solution via partial superhydrophobic modification of the NWs.     

Effect of Ag loading on activated carbon doped ZnO for bisphenol A degradation under visible light

Silver modified activated carbon doped zinc oxide (Ag/AC-ZnO) was synthesized via a calcination-electroless deposition route. The samples were characterized by X-ray powder diffractometry, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity of the Ag/AC-ZnO was evaluated for bisphenol A degradation in the presence of H₂O₂ under visible light irradiation. The archived results showed that the photocatalytic activity of the Ag/AC-ZnO was higher than that of AC-ZnO and pure ZnO. The cytotoxicity of the bisphenol A after photocatalysis under visible light irradiation was tested using L929 mouse fibroblast cells and the obtained results indicated that the treated bisphenol A solution exhibited no cytotoxicity against normal cells.     

The carboxylate magnetic – Zinc based metal-organic framework heterojunction: Fe3O4-COOH@ZIF-8/Ag/Ag3PO4 for plasmon enhanced visible light Z-scheme photocatalysis

In this work, magnetic nanoparticles (MNPs) grafted with carboxylic acid (Fe₃O₄-COOH MNPs) were successfully prepared from incorporation of glutaric anhydride as a functional group on the surface of the ferrite NPs. The MNP was used as a template to induce the growth of ZIF-8 metal–organic framework (MOF) on its surface. The Fe₃O₄-COOH@ZIF-8 core-shell was incorporated with silver phosphate (Ag₃PO₄) and Ag nanoparticles (Ag NPs) to develop a visible light active Fe₃O₄-COOH@ZIF-8/Ag/Ag₃PO₄ photocatalyst. The materials were characterized using a range of techniques. The photocatalytic activity was investigated systematically by degrading an organo-phosphorus pesticide, diazinon under visible light irradiation. Among synthesized samples, the Fe₃O₄-COOH@ZIF-8/Ag/Ag₃PO₄ heterostructured system exhibited highest photocatalytic activity and improved stability compared to others for the degradation of diazinon under visible light. The superior activity and improved stability of this heterostructured photocatalyst was attributed to the synergistic effects from surface plasmon resonance (SPR) of Ag NPs and sequential energy transfer via Z-scheme mechanism, for effective separation of electron-hole pairs. Radical-trapping experiments demonstrate that holes (h⁺) and O₂⁻ are primary reactive species involved in photocatalytic oxidation process. Moreover, the Fe₃O₄-COOH@ZIF-8/Ag/Ag₃PO₄ photocatalyst did not show any obvious loss of photocatalytic activity during five cycle tests, which indicate that the heterostructured photocatalyst was highly stable and can be used repeatedly. Therefore, the work provides new insights into the design and fabrication of metal-organic frameworks (MOFs) for use as a visible light photocatalyst for degrading organic contaminants.     

Au/ZnO nanocomposites: Facile fabrication and enhanced photocatalytic activity for degradation of benzene

Au nanoparticles supported on highly uniform one-dimensional ZnO nanowires (Au/ZnO hybrids) have been successfully fabricated through a simple wet chemical method, which were first used for photodegradation of gas-phase benzene. Compared with bare ZnO nanowires, the as-prepared Au/ZnO hybrids were found to possess higher photocatalytic activity for degradation of benzene under UV and visible light (degradation efficiencies reach about 56.0% and 33.7% after 24 h under UV and visible light irradiation, respectively). Depending on excitation happening on ZnO semiconductor or on the surface plasmon band of Au, the efficiency and operating mechanism are different. Under UV light irradiation, Au nanoparticles serve as an electron buffer and ZnO nanowires act as the reactive sites for benzene degradation. When visible light is used as the light irradiation source, Au nanoparticles act as the light harvesters and photocatalytic sites alongside of charge-transfer process, simultaneously.     

Ag-modified ZnO nanorods and its dual application in visible light-driven photoelectrochemical water oxidation and photocatalytic dye degradation: A correlation between optical and electrochemical properties

In this work, Ag-ZnO composite was prepared at different weight percentages using a modified hydrothermal method for application to the photoelectrochemical (PEC) water oxidation and photocatalytic dye degradation. The resulting samples were studied using structural, surface, optical and photoelectrochemical (PEC) characterization methods. The surface plasmon resonance (SPR) of the optimal catalyst played an essential role in the synergistic improvement of the optical response and the photoinduced charge carrier separation process. The optimal Ag modified ZnO (3 wt% of Ag) showed superior photocatalytic and water oxidation performance. The inclusion of Ag has also played a vital role in the defect concentration and the Schottky junction at the metal–metal oxide interface. As a result, the PEC behavior of the optimal samples showed drastic improvements in terms of water oxidation current response under visible light illumination. Consequently, the photocatalytic performance of the samples also exhibits a linear relationship with the PEC water oxidation performance. The PEC and photocatalytic performance of the optimal sample showed almost five and seven times superior performance than the pristine ZnO in terms of photocurrent value and rate constant value, respectively. This can be attributed to the existence of the Schottky junction leading to the minimum charge transfer resistance and better charge transport across the interface. The superiority of the optimal sample is explained in terms of the physicochemical properties and electrochemistry of the material. To the best of the authors’ knowledge, this is the first report on the role of optimal Ag content in ZnO for its dual application. The combined study offering complete information, the work provides guidelines for noble metal-modified catalyst research moving forward.     

Preparation of Au nanoparticle-decorated ZnO/NiO heterostructure via nonsolvent method for high-performance photocatalysis

In this paper, we present a novel physical (or nonsolvent) route to fabricate a kind of Au/ZnO/NiO heterostructure photocatalytic composite. That is, a Zn layer upon Ni foam substrate is prepared by pulse electrodeposition, then the ZnO nanoneedle/NiO heterostructural composite is obtained via thermal oxidation, and at last, the composite is modified with the dispersively deposited Au nanoparticles (Au NPs) by ion sputtering. The surface plasmon resonance effect of the Au NPs significantly enhances the light absorption. Meanwhile, the Au NPs form a Schottky barrier with ZnO nanoneedles and further inhibit the recombination of photogenerated electron–hole pairs. In addition, due to the nonsolvent conditions, the introduction of impurities is avoided, and thus it shows strong photocatalytic stability. The experimental results reveal that, the optimized Au/ZnO/NiO composite exhibits up to two times photocatalytic performance on RB degradation and higher stability than that of regular ZnO/NiO composite. The present experimental strategy can also be used for other noble metals, and it is expected to have important application prospects in the fields of environmental purification, solar cells, hydrogen generation, etc.     

ZnO/CdS/Ag复合光催化剂的制备及其催化和抗菌性能

先用水热反应合成六方晶相CdS多层级花状微球并在其表面生长ZnO纳米棒形成均匀的ZnO/CdS复合结构,然后用光还原法将Ag纳米颗粒负载于ZnO纳米棒制备出ZnO/CdS/Ag三元半导体光催化剂,对其进行扫描电镜和透射电镜观察、光电性能测试、活性基团捕获实验以及光催化降解和抗菌性能测试,研究其对亚甲基蓝(MB)的降解和抗菌性能。结果表明：ZnO纳米棒均匀生长在CdS微球表面,CdS晶体没有明显裸露,Ag纳米粒子负载在ZnO纳米棒的表面;ZnO/CdS/Ag三元复合光催化剂有良好的可见光响应、较低的阻抗和较高的光电流密度;ZnO/CdS/Ag复合光催化剂能同时产生羟基和超氧自由基等活性氧基团;ZnO/CdS/Ag三元复合光催化剂对亚甲基蓝(MB)的30 min降解率高于90%;0.25 mg/mL的ZnO/CdS/Ag对革兰氏阴性菌(大肠杆菌)的灭菌率高于96%,对革兰氏阳性菌(金黄色葡萄球菌)能完全灭除。     

One step pyridine-assisted synthesis of visible-light-driven photocatalyst Ag/AgVO3

Ag/AgVO₃ nanorods have been obtained for the first time by one step hydrothermal method with the contribution of pyridine. The prepared sample was systematically characterized. Their photocatalytic properties were investigated by degrading acid orange II (AO-II) under visible light. Compared with pure AgVO₃, Ag/AgVO₃ nanorods showed much higher photocatalytic activity and stability. The enhanced photocatalytic activity was attributed to Ag nanoparticles (NPs) with a strong surface plasmon resonance (SPR). Further studies indicate that the photogenerated holes (h⁺) and superoxide radical anions (O₂^?) were major active species. Ag/AgVO₃ nanorods has a huge potential application in wastewater treatment.     

Synthesis,characterisation and antimicrobial activity of manganese- and iron-doped zinc oxide nanoparticles

The present work reports study on antimicrobial activity of pure and doped ZnO nanocomposites. Polyvinyl pyrrolidone capped Mn- and Fe-doped ZnO nanocomposites were synthesised using simple chemical co-precipitation technique. The synthesised materials were characterised using transmission electron microscope (TEM), X-ray powder diffraction (XRD), energy dispersive X-ray fluorescence (EDXRF), Fourier transform infrared (FTIR) spectroscopy and ultraviolet (UV) visible spectroscopy. The XRD and TEM studies reveal that the synthesised ZnO nanocrystals have a hexagonal wurtzite structure with average crystalline size ～7–14 nm. EDXRF and FTIR study confirmed the doping and the incorporation of impurity in ZnO nanostructure. The antimicrobial activities of nanoparticles (NPs) were studied against fungi, gram-positive and gram-negative bacteria using the standard disc diffusion method. The photocatalytic activities of prepared NPs were evaluated by degradation of methylene blue dye in aqueous solution under UV light irradiation. Experimental results demonstrated that ZnO NPs doped with 10% of Mn and Fe ions showed maximum antimicrobial and photodegradation efficiency in contrast with that of the 1% loading. The enhancement in antimicrobial effect and photocatalytic degradation is attributed to the generation of reactive oxygen species due to the synergistic effects of Mn and Fe loading.     

Photodegradation pathway of rhodamine B with novel Au nanorods @ ZnO microspheres driven by visible light irradiation

A series of Au–ZnO photocatalysts were successfully synthesized from ZnO microspheres impregnated with Au nanorods by the seed-mediated method, and their photocatalytic activity of degradation of rhodamine B (RhB) was investigated. The nanocomposite catalyst exhibited high photocatalytic activity and degraded 92% of RhB solution under visible light irradiation in 330 min. The enhancement of photocatalytic effects was mainly ascribed to the surface plasmon resonance effect of Au nanorods; therefore, Au–ZnO spheres can absorb resonant photons and transfer the electron to the conduction band (CB) of ZnO leading to the separation of electrons and holes under visible light. Meanwhile, the photocatalytic performance was beneficial from the flower-like porous structure of ZnO, which enhances adsorption of the dye molecules and dissolved oxygen on the catalyst surface and facilitates the electron/hole transfer. Furthermore, the degradation pathway was proposed on the basis of the intermediates during the photodegradation process using liquid chromatography analysis coupled with mass spectroscopy (LC–MS). The degradation mechanism of pollutant is ascribed to the superoxide radicals (^·O^2?), which is the main oxidative species for the N-deethylated degradation of RhB. Moreover, the Au–ZnO photocatalysts demonstrated excellent photostability after five cycles. This work provides a facile and effective approach for removal of organic dyes under visible light and thus can be potentially used in the environmental purification.     

Influence of synthetic parameters on the enhanced photocatalytic properties of ZnO nanoparticles for the degradation of organic dyes: a green approach

Herein, we report a green synthetic strategy using aqueous leaves extract of Actinodaphne madraspatna Bedd (AMB) for the synthesis of ZnO NPs. The physical shape, size, thermal stability, surface area, surface composition and chemical state, morphological and optical properties of the synthesized ZnO NPs are well characterized through UV–Visible diffuse reflectance spectroscopy (DRS UV), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Raman spectroscopy, thermal gravimetric analysis–differential thermal analysis (TGA–DTA), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) and X-ray photon spectroscopy (XPS). FT-IR spectrum of ZnO NPs showed a characteristic peak at 416.62 cm^?1. Optical studies of prepared ZnO NPs showed the bandgap values are reduced in the range of 3.05 to 2.96 eV. The XRD and TEM data revealed the synthesized ZnO NPs exist in wurtzite crystal structure with crystallite sizes of 18 nm to 68 nm range. The variation in bandgap, surface area and crystallite structure of ZnO NPs would be achieved by changing the experimental parameters. FESEM showed spherical-shaped structure. XPS result confirmed the atomic states of Zn and O. The green synthesized ZnO NPs were examined for the photocatalytic degradation of methylene blue (MB) and acid violet 17 (AV17) dyes under UV light and the rate constants ‘k’ was calculated. It is found that the green synthesized ZnO NPs with reduced bandgap showed enhanced photocatalytic activity with higher rate constant.

     

Weighting the influence of TiO2 anatase/brookite ratio in TiO2–Ag porous nanocomposites on visible photocatalytic performances

Nanocomposites based on TiO₂ aerogel and Ag nanoparticles have been successfully obtained through different synthesis methods and their specific surface areas have been determined by N₂ sorption (BET method). The photocatalytic potential for salicylic acid degradation has been evaluated. It was found that under visible light irradiation, all synthesized nanocomposites exhibit higher photocatalytic activity than the commercially available Aeroxide P25. By correlating the structural parameters with the photocatalytic performances, it has been found that the Ag nanoparticles and brookite phase presence alongside the anatase play important roles on the visible photocatalysts behavior. For the Ag containing samples with mixed anatase–brookite phases, it has been observed that the visible photocatalytic performance decreases with the increase in brookite crystalline phase content. On the other hand, the addition of Ag nanoparticles results, as expected, in a clear enhancement of the visible photocatalytic activity.     

Partial conversion reaction of ZnO nanowires to ZnSe by a simple selenization method and their photocatalytic activities

A simple novel synthetic method for preparing ZnSe/ZnO heterostructured nanowire (NW) arrays via the selenization of ZnO NWs is reported. A hydrothermally grown ZnO NWs array on a glass substrate was reacted with selenium vapor to generate a 20–30 nm of zincblend ZnSe nanoparticles (NPs) on wurtzite ZnO NWs. A growth mechanism was proposed based on SEM, XRD, and TEM analysis to explain the partial chemical conversion of ZnO NW surfaces into ZnSe NPs. This mechanism is applicable to the synthesis of other chalcogenide compounds. The as-synthesized ZnSe/ZnO heterojunctions showed enhanced UV–visible light absorption properties. The materials exhibited excellent photocatalytic activity toward the decomposition of an organic dye compared to the bare ZnO due to enhanced light absorption and the type-II cascade band structure.     

A high performance cobalt-doped ZnO visible light photocatalyst and its photogenerated charge transfer properties

Highly photocatalytically active cobalt-doped ZnO (ZnO:Co) nanorods have been prepared by a facile hydrothermal process. X-ray diffraction, X-ray photoelectron spectroscopy, Raman scattering and UV-vis diffuse reflectance spectroscopy confirmed that the dopant ions substitute for some of the lattice zinc ions, and furthermore, that Co²⁺ and Co³⁺ ions coexist. The as-prepared ZnO:Co samples have an extended light absorption range compared with pure ZnO and showed highly efficient photocatalytic activity, only requiring 60 min to decompose ∼93% of alizarin red dye under visible light irradiation (λ > 420 nm). The photophysical mechanism of the visible photocatalytic activity was investigated with the help of surface photovoltage spectroscopy. The results indicated that a strong electronic interaction between the Co and ZnO was present, and that the incorporation of Co promoted the charge separation and enhanced the charge transfer ability and, at the same time, effectively inhibited the recombination of photogenerated charge carriers in ZnO, resulting in high visible light photocatalytic activity.      

A facile co-precipitation synthesis of heterostructured ZrO<Subscript>2</Subscript>|ZnO nanoparticles as efficient photocatalysts for wastewater treatment

ZrO₂-decorated ZnO (ZrO₂|ZnO) nanoparticles (NPs) have been synthesized by a facile co-precipitation method in the presence of cetyltrimethylammonium bromide (CTAB) surfactant. The ZrO₂ amount in the NPs has been varied from 1.0, 2.0, 4.9, to 9.3% by weight. The resulting NPs are heterostructured and consist of a crystalline ZnO core (wurtzite phase) surrounded by an amorphous ZrO₂ layer. X-ray diffraction analyses support this observation. The NPs show a narrow size distribution and are slightly elongated. Compared to pure ZnO NPs, the hybrid ZrO₂|ZnO ones show enhanced photocatalytic activity toward the degradation of Rhodamine B under UV–Vis light. Such enhancement has been partly attributed to the increased amount of oxygen vacancies when ZrO₂ is incorporated into the NPs, as shown by X-ray photoelectron spectroscopy analyses.