刚柔组合搅拌桨与刚性桨调控流场结构的对比

高黏度流体处于层流状态时,普遍存在的混合隔离区,降低了流体的混合效率。减小或消除隔离区,是实现流体高效混合的基本途径。采用实验研究与数值模拟相结合的方法,对刚性六直叶涡轮桨(刚性桨)和刚柔组合六直叶涡轮桨(组合桨)的流场结构进行研究,对比分析了两种桨叶在相同功耗(3 kW·m-3)时的轴向、径向和切向的速度矢量图、速度云图以及速度分布散点图。结果表明,刚性桨的能量集中在桨叶尖端部分,远离桨叶区域的流体速度很小甚至为0 m·s-1;而组合桨可将能量从桨叶尖端扩散至全槽,使槽内流体均具有一定的流速,提高了混合效率,且显色实验与数值模拟结果一致,组合桨体系的混合隔离区在短时间内就可消除,混合良好,而刚性桨体系的混合隔离区始终存在,混合效果不佳。     

不同型式搅拌桨对黄原胶水溶液搅拌效果的CFD数值模拟

使用FLUENTa软件对黄原胶溶液在搅拌槽内的流动特征、桨叶搅拌效果和功率消耗进行了数值模拟. 计算采用多重参考系方法和标准k-e湍流方程. 黄原胶浓度为0~2.0%(w),桨型为直叶圆盘涡轮、非对称抛物线圆盘涡轮和四斜叶桨. 结果表明,不同桨型下溶液的粘度分布有较大差异,且搅拌效率随溶液浓度增加急剧下降,转速增加能有限提高搅拌效率. 径流桨和轴流桨产生的功率消耗随溶液浓度改变呈相反的变化趋势. 在黄原胶浓度2.0%(w)、搅拌转速7.5 r/s时,所有桨型下有效搅拌体积所占比例均低于60%;与在水中相比,直叶圆盘涡轮的功率消耗降低约7%,而四斜叶桨的功率消耗增加29%.     

刚柔组合搅拌桨与刚性桨调控流场结构的对比

高黏度流体处于层流状态时,普遍存在的混合隔离区,降低了流体的混合效率。减小或消除隔离区,是实现流体高效混合的基本途径。采用实验研究与数值模拟相结合的方法,对刚性六直叶涡轮桨（刚性桨）和刚柔组合六直叶涡轮桨（组合桨）的流场结构进行研究,对比分析了两种桨叶在相同功耗（3 kW·m^-3）时的轴向、径向和切向的速度矢量图、速度云图以及速度分布散点图。结果表明,刚性桨的能量集中在桨叶尖端部分,远离桨叶区域的流体速度很小甚至为0 m·s^-1;而组合桨可将能量从桨叶尖端扩散至全槽,使槽内流体均具有一定的流速,提高了混合效率,且显色实验与数值模拟结果一致,组合桨体系的混合隔离区在短时间内就可消除,混合良好,而刚性桨体系的混合隔离区始终存在,混合效果不佳。     

刚-柔组合搅拌桨强化流体混沌混合

合理设计搅拌反应器的桨叶,强化流体流动与混合行为,是实现流体高效、节能混合的重要手段。柔性体与刚性体组合,可设计出具有多体运动行为的刚-柔组合搅拌桨。结合PIV流场观测和CFD模拟,对比分析了刚性桨和刚-柔组合桨对流场结构及流体混沌混合行为的影响。结果表明,与刚性搅拌桨相比,刚-柔组合桨的柔性端强化能量传递,流体流速衰减速率降低25%,有利于搅拌桨输入能量在流场结构内的有效分配。传统刚性六凹叶和六直叶涡轮桨搅拌反应器内流体形成的流线结构具有明显的周期吸引子,其时均流场的分形维数分别为1.9046和1.9138。刚-柔组合六直叶涡轮桨搅拌反应器内流体流线呈明显的准周期性吸引子性质,其流场分形维数为1.9337,而刚-柔组合六凹叶涡轮桨搅拌反应器内流体流线具有典型的混沌吸引子性质,其流场分形维数为1.9545。刚-柔组合搅拌桨可改变流体流线的吸引子来调控流场的多尺度结构,强化流体混沌混合,实现高效节能操作。     

刚-柔组合搅拌桨强化流体混沌混合

合理设计搅拌反应器的桨叶,强化流体流动与混合行为,是实现流体高效、节能混合的重要手段。柔性体与刚性体组合,可设计出具有多体运动行为的刚-柔组合搅拌桨。结合PIV流场观测和CFD模拟,对比分析了刚性桨和刚-柔组合桨对流场结构及流体混沌混合行为的影响。结果表明,与刚性搅拌桨相比,刚-柔组合桨的柔性端强化能量传递,流体流速衰减速率降低25%,有利于搅拌桨输入能量在流场结构内的有效分配。传统刚性六凹叶和六直叶涡轮桨搅拌反应器内流体形成的流线结构具有明显的周期吸引子,其时均流场的分形维数分别为1.9046和1.9138。刚-柔组合六直叶涡轮桨搅拌反应器内流体流线呈明显的准周期性吸引子性质,其流场分形维数为1.9337,而刚-柔组合六凹叶涡轮桨搅拌反应器内流体流线具有典型的混沌吸引子性质,其流场分形维数为1.9545。刚-柔组合搅拌桨可改变流体流线的吸引子来调控流场的多尺度结构,强化流体混沌混合,实现高效节能操作。     

氨碱法蒸馏系统300 m3预灰桶搅拌桨流场数值模拟分析

氨气蒸馏是氨碱法生产纯碱的重要工序，其中预处理设备预灰桶的搅拌混合效果会直接影响蒸氨效率。因此，系统研究预灰桶内的流场分布，对纯碱工业的发展具有一定现实意义。基于流体力学对预灰桶内流体流动情况进行了计算，分析了工业常用吊链式搅拌桨预灰桶内流场分布。吊链式搅拌中流体以切向流为主，混合效果差。进一步对预灰桶搅拌桨叶进行了选型，分析了斜叶桨、六斜叶圆盘涡轮桨和六直叶圆盘涡轮桨3种桨型以及不同搅拌层数的流场分布，结果表明双层六斜叶圆盘涡轮桨混合效果最好。研究结果对氨碱法制碱工业中预灰桶搅拌设备的选型和设计提供了参考。     

一种计算搅拌槽混合时间的新方法

基于对混合时间定义的思考,提出了一种新的定义方法,在湍流流场数值计算的基础上通过求解示踪剂的浓度输运方程,研究了单层涡轮桨搅拌槽内的混合过程。结果表明：搅拌转速和搅拌桨安装位置都影响混合时间的大小,而进料位置对混合时间的影响不大。对于不同的搅拌转速而言,随搅拌转速的增大,相同体积分数对应的混合时间逐渐减小。当搅拌桨安装在槽中间位置时所对应的混合时间最小。利用适宜的尺寸和安装位置的导流筒可有效降低混合时间。     

偏心搅拌槽内近桨区流场特性对比研究

利用CFD软件对直径为60mm的平底圆柱形无挡板搅拌槽内六直叶圆盘涡轮桨(DT)和六斜叶圆盘涡轮桨(60°IBT、45°IBT)在不同偏心率下近桨区的流场进行了分析与对比,定性地说明偏心对近桨区流场的影响。结果表明,随着偏心率的增大轴向速度先增大后减小;与之相反,径向速度先减小后增加,且轴向速度与径向速度的变化呈现此消彼长的趋势;而周向速度的变化较轴向速度、径向速度变化复杂。三种倾角的桨叶中,受偏心率影响最大的是DT桨,最小的是45°IBT桨。     

固-液搅拌槽的分散性能

在直径为0.478 m的立式搅拌槽中,采用高岭土和水为物料,比较了四斜叶、六直叶涡轮等8种桨的固-液分散性能及搅拌功率(P)、桨组合形式对分散性能的影响规律. 结果表明,8种桨中分散效果最好的是六直叶涡轮桨和四斜叶桨,分散速率最快的是两叶CBY桨;分散速率与P1.08成正比;分散前期,搅拌功率增加,相对分散效果Y随之提高,当Y达到0.999以上,提高搅拌功率对搅拌效果几乎不起作用;采用分散速率较快(两叶CBY桨)与分散效果较好(四斜叶桨)的双桨组合,更适于连续操作过程.     

组合桨的气液搅拌特性实验研究

对 6种三层组合搅拌桨的功率准数及传质特性进行了实验研究。结果表明 ,1层径流型桨叶和2层混流型桨叶的组合 ,综合性能优于其他形式搅拌桨的组合 ,其功率准数比六直叶圆盘涡轮式桨叶减少 4 0 % ,且在通气下其功率下降最小 ,而传质系数Kla与最大的三层六直叶圆盘涡轮搅拌桨相当     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。