共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
文章对光传送网(OTN)新的体系架构进行了建模,运用一种新的映射方式将客户信号适配到OTN模型中进行传送.通过对接收端时钟和理想时钟的对比,分析了新旧映射方式对OTN时钟性能产生的影响,证明了新映射方法具有对时钟性能影响更小的优点.此模型和所得结论可帮助光网络系统设计人员在系统设计前衡量和分析网络时钟的性能,以及预估各种映射方式对时钟性能的影响. 相似文献
3.
通信网同步不良,发,收两端时钟出现差异时会使收端设备漏读或重读而形成滑码,带来突发误码,相位突跳,抖动,漂移等系统损害。根据铁路通信传送网分级传送,点多线长,分布较广的特点,建议采用主从分级结构的分布式多基准时钟同步方案,介绍了铁路时钟同步组网方案,工程设计中定时信号的传递方式和时钟同步系统工程设计方案。 相似文献
4.
同步网是电信三大支撑网之一,由节点时钟和传递同步定时信号的同步链路构成。其作用是准确地将同步定时信号从基准时钟传送到同步网的各节点,调整网中的各时钟并保持信号同步,满足通信网传输性能和交换性能的需要。 相似文献
5.
随着下一代网络(NGN)和3G网络的大规模应用,传统的以电路交换为主的公共交换电话网(PSTN)逐渐转向以分组交换为主.在从传统网络向未来网络转换的过程中,时钟同步仍然是其中面临的一大难题.文章研究和分析了分组传送网(PTN)中应用同步的两种技术,即同步以太网技术和IEEE 1588 V2技术,并且阐述了其相关原理和在PTN时钟同步中的应用. 相似文献
6.
7.
8.
9.
IEEE 1588v2是一种基于数据包传送的同步技术标准,它采用时戳机制和主从时钟方案,对时间进行编码传送,同时利用网络链路的对称性和时延测量技术,实现主从时钟频率和时间的同步。其中,时间同步精度能达到亚微秒级。当前,IEEE 1588v2在通信领域的协议标准已经成熟,正越来越多地应用于3G/LTE承载网中。 相似文献
10.
11.
OTN和PTN这两种技术体制有着鲜明的特点。结合这两种技术体制可以满足NGN传输IP化的要求,并根据两种技术的特点和定位,结合实例描述两种技术相结合的实现方案。 相似文献
12.
文章研究了基于TTL的Web缓存层次过滤效果,业务量性质对基于TTL的动态Web缓存系统的性能有重要影响。在层次缓存中,由于只有错失的请求才会被转发给下一级缓存,因而逐级对业务量存在过滤作用,业务量性质随之改变。文章利用仿真研究了基于TTL的动态Web缓存层次过滤对业务量的影响。重点考察了请求到达间隔模型及对象流行度分布的变化。 相似文献
13.
Johansson S. Lindblom M. Granestrand P. Lagerstrom B. Thylen L. 《Lightwave Technology, Journal of》1993,11(5):688-694
A network robust to future evolution in network topologies or transmission formats and bit rates, which would be achieved by introducing an all-optical transparent layer in the transport network hierarchy is considered. The transparency would permit use of physically common fiber lines and nodes for different transmission hierarchies and/or formats. A transparent network could be achieved by combining photonic switching with electronic switching technology in the network nodes. A combination of wavelength routing and space-division switching in the optical layer would increase the capacity, as well as the flexibility in a network, allowing routing with higher granularity within the optical layer. Two optical cross-connect demonstrators have been set up. One demonstrates protection switching and restoration of traffic in a future transport network, and the other demonstrates routing of subscriber signals to different service switches in a local exchange. Space switches, tunable lasers and filters are the key technologies used to obtain enhanced flexibility 相似文献
14.
同步数字系列SDH的迅猛发展及传统准同步数字系列PD 量共存,导致了许多业务须在SDH及非SDH接口界面上传送。非SDH接口定时一秀从传统的PDH2048kbit/s数据信号中提取但SDH网络中由于指针调整机制的引入,使得2048kbit/s数据不再能传递定时信息,这就给SDH/非SDH接口界面的定时带来问题,本文提出了再定量及改进解同步器等2种解决这一问题的方法,并给出了应用实例。 相似文献
15.
16.
We propose a new, media-independent protocol for including program timing, structure and identity information in Internet media streams. The protocol uses signaling messages called cues to indicate events whose timing is significant to receivers, such as the start or stop time of a media program. We describe the implementation and operation of a prototype Internet radio station which transmits program cues in audio broadcasts using a real-time transport protocol (RTP). A collection of simple yet powerful stream processing applications we implemented demonstrate how application creation is greatly eased when media streams are enriched with program cues. 相似文献
17.
上翻(Rollup)作为OLAP的核心操作,将多维数据按维层次聚集,使用户能够在不同粒度上对数据进行观察。尽管基于常规层次的上翻操作,可被数据仓库高效地处理。然而,对于递归层次而言,由于SQL递归对于聚集函数分层的限制,如果将上翻操作表示为SQL递归查询,则会导致效率低下。为解决这一效率问题,文中专门针对OLAP的特点,提出了一个基于迭代的上翻操作计算策略,并利用对象关系技术,将这一策略无缝地嵌入到数据仓库之中。实验表明,其效率远远高于SQL递归计算策略。 相似文献
18.
上 线性码c的汉明重量谱为序列 ,其中,dr是c的r维子码的最小支撑重量。第VI类5维q元线性码的汉明重量谱,按照新的必要条件可以分成6个子类。运用有限射影几何方法研究VI-2类的5维q元线性码的汉明重量谱,确定VI-2类5维q元线性码的几乎所有汉明重量谱。 相似文献
19.
从标签系统中生成层次体系可以支持多种类型的应用,具备重要的意义.当前的研究主要集中于发现标签间的关系,但对如何利用这些关系形成高质量的层次体系却关注不足.针对这一现状,研究了支持Web 2.0标签层次体系构建的关系识别及层次组合方法,通过分析并识别已发现的标签间关系所具有的不同类型提升了标签间关系的质量,并提出基于语义流动分析的层次组合方法实现了更高质量的层次体系构建.应用多种评估指标的实验结果表明应用关系识别及使用语义流分析方法可以获得相比评估方法更高质量的标签层次体系. 相似文献
20.
An analysis of energy consumption for TCP data transfer with burst transmission over a wireless LAN
下载免费PDF全文
![点击此处可从《International Journal of Communication Systems》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Masafumi Hashimoto Go Hasegawa Masayuki Murata 《International Journal of Communication Systems》2015,28(14):1965-1986
A common strategy for energy saving in wireless network devices is to remain in sleep mode for as long as possible. The timing of packet transmission and reception depends on the behavior of the transport‐layer protocols used by upper‐layer applications. Therefore, understanding the relation between the behavior of the transport‐layer protocols and energy efficiency using sleep mode is important for effective energy saving, especially when a wireless network interface (WNI) is activated in sleep mode at packet interarrivals. In this paper, we analyze the energy consumption of a client's WNI in Transmission Control Protocol (TCP) data transfer over a wireless LAN by focusing on the detailed behavior of TCP congestion control mechanisms. This model considers three situations: the WNI is activated in continuously active mode, in sleep mode, and in sleep mode with burst transmission. The latter is proposed as an effective method to improve energy efficiency, which lengthens sleep periods by transmitting and receiving multiple packets in a bursty fashion. Through numerical examples, we show that sleeping without modification of transmission timing reduces energy consumption in TCP data transfer by only around 10%, and that the burst transmission can contribute further 50% energy reduction. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献