Substitutional adsorption isotherms and corrosion inhibitive properties of some oxadiazol-triazole derivative in acidic solution

A newly synthesized oxadiazol-triazole derivative (TOMP), was investigated as corrosion inhibitor of mild steel in 0.5 M H₂SO₄ solution using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. Results obtained revealed that TOMP is effective corrosion inhibitor for mild steel in sulphuric acid and its efficiency attains more than 97.6% at 298 K. The number of water molecules (X) replaced by a molecule of organic adsorbate was determined from the substitutional adsorption isotherms applied to the data obtained from the weight loss experiments performed on mild steel specimen in acidic solution in the 298-333 K range.     

Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media

Adsorption of four derivatives of piperidinylmethylindoline-2-one on mild steel surface in 1 M HCl solution and its corrosion inhibition properties has been studied by a series of techniques, such as polarization, electrochemical impedance spectroscopy (EIS), weight loss and quantum chemical calculation methods. The values of activation energy (E_a) for mild steel corrosion and various thermodynamic parameters were calculated and discussed. Potentiodynamic polarization measurements showed that all inhibitors are mixed type. The degree of surface coverage was determined by using weight loss measurements and it was found that adsorption process of studied inhibitors on mild steel surface obeys Langmuir adsorption isotherm.     

Inhibiting effects of butyl triphenyl phosphonium bromide on corrosion of mild steel in 0.5 M sulphuric acid solution and its adsorption characteristics

Butyl triphenyl phosphonium bromide (BuTPPB) has been evaluated as a corrosion inhibitor for mild steel in 0.5 M H₂SO₄ solutions using galvanostatic polarisation and potentiostatic polarisation measurements. The study was also complemented by infra red (IR) spectroscopy, scanning electron microscopy (SEM) and quantum chemical calculations. Galvanostatic polarisation measurements showed that the presence of BuTPPB in aerated 0.5 M H₂SO₄ solutions decreases corrosion currents to a great extent and the corrosion rate decreases with increasing inhibitor concentration at a constant temperature. At 298K, inhibition efficiency was found to be 94.5% for 10⁻⁷ M BuTPPB which increased to about 99% for the BuTPPB concentration of 10⁻² M. The effect of temperature on the corrosion behaviour of mild steel was studied at five different temperatures ranging from 298 to 338K. The polarisation curves clearly indicate that BuTPPB acts as a mixed type inhibitor. Adsorption of BuTPPB on the mild steel surface follows the Langmuir isotherm.Potentiostatic polarisation measurements showed that passivation was observed only for lower BuTPPB concentrations (10⁻⁵ and 10⁻⁷ mol l⁻¹) for the mild steel in 0.5 M H₂SO₄. IR and SEM investigations also confirmed the adsorption of BuTPPB on the mild steel surface in 0.5 M H₂SO₄ solutions. The molecular parameters obtained using PM3 semi-empirical method, were correlated with the experimentally measured inhibitor efficiencies.     

Experimental and molecular dynamics studies on corrosion inhibition of mild steel by 2-amino-5-phenyl-1,3,4-thiadiazole

The corrosion inhibition of mild steel in 0.5 M H₂SO₄ and 1.0 M HCl by 2-amino-5-phenyl-1,3,4-thiadiazole (APT) has been studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The results show that the inhibition efficiency increases with the increase of APT concentration in both acids, and the higher inhibition efficiency is obtained in 0.5 M H₂SO₄. The adsorption of APT molecules on the steel surface obeys Langmuir adsorption isotherm in both acids, and occurs spontaneously. The molecular dynamics method has also been used to simulate the adsorption of ATP molecule and solvent ions on the iron surface. The results show that with the adsorption of sulfate ions the Fe + anion + APT system has the higher negative interaction energy comparing to the case of the adsorption of chloride ions.     

2,2′-Dithiobis(3-cyano-4,6-dimethylpyridine): A new class of acid corrosion inhibitors for mild steel

The title compound (PyS)₂ has been synthesized and its inhibiting action on the corrosion of mild steel in 1-5 M H₂SO₄ solutions at 35-50 °C has been investigated by polarization resistance (R_p), polarization curves and electrochemical impedance spectroscopy (EIS). (PyS)₂ showed excellent performance and its efficiency did not affect either by increasing the acid concentration or rise of temperature. Polarization curves indicated that (PyS)₂ behaves mainly as anodic inhibitor in 1 M H₂SO₄ solutions and as a mixed-type inhibitor in 3 and 5 M H₂SO₄ solutions at different temperatures. Adsorption of (PyS)₂ on the steel surface followed Temkin’s adsorption isotherm with a very high negative value of the free energy of adsorption . The activation parameters of the corrosion process were calculated. EIS showed that the charge transfer controls the corrosion process in the uninhibited and inhibited solutions.     

Synergistic effect of halide ions on improving corrosion inhibition behaviour of benzisothiozole-3-piperizine hydrochloride on mild steel in 0.5 M H2SO4 medium

The synergistic effect of iodide ions and benzisothiozole-3-piperizine hydrochloride (BITP) on corrosion inhibition of mild steel in 0.5 M H₂SO₄ solution has been studied by both chemical and electrochemical methods. The corrosion performance of BITP in 1.0 M HCl and 0.5 M H₂SO₄ media was examined and compared. The adsorption of BITP and its combination with iodide ions on mild steel surface followed Langmuir adsorption isotherm via chemisorption mechanism. The calculated values of synergism parameter (S_θ) were found to be greater than unity. This result clearly showed the existence of synergism between iodide ions and BITP molecules.     

On the inhibition of mild steel corrosion by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol

The corrosion inhibition of mild steel in a 2.5 M H₂SO₄ solution by 4-amino-5-phenyl-4H-1, 2, 4-trizole-3-thiol (APTT) was studied at different temperatures, utilising open circuit potential, potentiodynamic and impedance measurements. The results indicate that APTT performed as an excellent mixed-type inhibitor for mild steel corrosion in a 2.5 M H₂SO₄ solution and that the inhibition efficiencies increased with the inhibitor concentration but decreased proportionally with temperature. The kinetic and thermodynamic parameters for adsorption of APTT on the mild steel surface were calculated. A chemisorption mechanism of APTT molecules on the mild steel surface was proposed based on the thermodynamic adsorption parameters.     

Corrosion inhibition of mild steel in hydrochloric acid solution by some double Schiff bases

The inhibition effect of four double Schiff bases on the corrosion of mild steel in 2 M HCl has been studied by polarization, electrochemical impedance spectroscopy (EIS) and weight loss measurements. The inhibitors were adsorbed on the steel surface according to the Langmuir adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process were calculated and discussed. Kinetic parameters activation such as E_a, ΔH∗, ΔS∗ were evaluated from the effect of temperature on corrosion and inhibition processes. Quantum chemical calculations have been performed and several quantum chemical indices were calculated and correlated with the corresponding inhibition efficiencies.     

Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution

Inhibitory effect of three Schiff bases 2-{[(2-sulfanylphenyl)imino]methyl}]phenol (A), 2-{[(2)-1-(4-methylphenyl)methylidene]amino}-1-benznethiol (B), and 2-[(2-sulfanylphen-yl)ethanimidoyl)]phenol (C) on corrosion of mild steel in 15% HCl solution has been studied using weight loss measurements, polarization and electrochemical impedance spectroscopy (EIS) methods. The results of the investigation show that the compounds A and B with mean efficiency of 99% at 200 mg/L additive concentration have fairly good inhibiting properties for mild steel corrosion in hydrochloric acid, and they are as mixed inhibitor. All measurements show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that inhibitive actions of inhibitors were mainly due to adsorption on mild steel surface. Adsorption of these inhibitors follows the Langmuir adsorption isotherm. Thermodynamic adsorption parameters (K_ads, ΔG_ads) of studied Schiff bases were calculated using the Langmuir adsorption isotherm. Activation parameters of the corrosion process such as activation energies, E_a, activation enthalpies, ΔH^∗, and activation entropies, ΔS^∗, were calculated by the obtained corrosion currents at different temperatures. Obvious correlation was found between the corrosion inhibition efficiency and the calculated parameters. The obtained theoretical results have been adapted with the experimental data.     

Corrosion monitoring of mild steel in sulphuric acid solutions in presence of some thiazole derivatives – Molecular dynamics, chemical and electrochemical studies

The physical behavior of three selected thiazole derivatives, namely 2-Amino-4-(p-tolyl)thiazole (APT), 2-Methoxy-1,3-thiazole (MTT) and Thiazole-4-carboxaldehyde (TCA) at iron (1 1 0) surface dissolved in aqueous solution were studied via molecular dynamics (MD) simulations. From the calculated binding energies, APT showed preferred adsorption on the steel surface among the three tested thiazole derivatives. The inhibition performance of the three thiazoles on the corrosion of mild steel in 0.5 M H₂SO₄ solutions was investigated at 25 °C. Measurements were conducted under various experimental conditions using weight loss, Tafel polarization and electrochemical impedance spectroscopy. Electrochemical frequency modulation (EFM) technique was also employed here to make accurate determination of the corrosion rates and test validation of the Tafel extrapolation method for measuring corrosion rates. Polarization curves showed that the three thiazole derivatives were of mixed-type inhibitors for mild steel corrosion in 0.5 M H₂SO₄ solution. EFM results were in agreement with other traditional chemical and electrochemical techniques used in corrosion rate measurements. Chemical and electrochemical measurements are consistent with computational study that APT is the most effective inhibitor among the tested thiazoles.     

Hydrophobic-tailed bicycloisoxazolidines: A comparative study of the newly synthesized compounds on the inhibition of mild steel corrosion in hydrochloric and sulfuric acid media

The cycloaddition reactions of the cyclic nitrones 1-pyrroline 1-oxide and 3,4,5,6-tetrahydropyridine 1-oxide with alkenes, 11-phenoxy-1-undecene and 11-p-methoxyphenoxy-1-undecene, afforded cycloaddition products (bicyclic isoxazolidines) in excellent yields. One of the cycloadducts on reaction with propargyl chloride and ring opening with zinc in acetic acid afforded quaternary ammonium salt and aminoalcohol, respectively. All the new inhibitor molecules in the presence of 400 ppm at 60 °C achieved inhibition efficiencies, determined by gravimetric method, in the range 99-99.6% and 85-99% for mild steel in 1 M HCl and 0.5 M H₂SO₄, respectively. Comparable results were obtained by the electrochemical methods using Tafel plots and electrochemical impedance spectroscopy for the synthesized compounds. The isoxazolidine derivatives were also found to be good inhibitors of mold steel corrosion in synthetic brine. Negative values of in the acidic media ensured the spontaneity of the adsorption process. While the corrosion inhibition by these molecules was predominantly under cathodic control in 1 M HCl, the inhibition in 0.5 M H₂SO₄ was found to be under anodic control. The isoxazolidines and their derivatives were found to be among a rare class of molecules, which provide suitable inhibition mechanism for the corrosion inhibition in HCl as well as in H₂SO₄ media.     

The inhibition of mild steel corrosion in acidic medium by 1-methyl-3-pyridin-2-yl-thiourea

The effect of 1-methyl-3-pyridin-2-yl-thiourea on the corrosion resistance of mild steel in H₂SO₄ solution was investigated by different techniques. The results show that the inhibition efficiency increases with the increase of inhibitor concentration. This compound affects both the anodic dissolution of steel and the hydrogen evolution reaction in 0.5 M H₂SO₄. The adsorption of this inhibitor is also found to obey the Langmuir adsorption isotherm. From the adsorption isotherm, value of the ΔG_ads for the adsorption process was calculated. From the corrosion rate obtained at 25-45 ± 1 °C E_a, ΔH_a and possible mechanism have been proposed.     

Caffeic acid as a green corrosion inhibitor for mild steel

The inhibitor effect of the naturally occurring biological molecule caffeic acid on the corrosion of mild steel in 0.1 M H₂SO₄ was investigated by weight loss, potentiodynamic polarization, electrochemical impedance and Raman spectroscopy. The different techniques confirmed the adsorption of caffeic acid onto the mild steel surface and consequently the inhibition of the corrosion process. Caffeic acid acts by decreasing the available cathodic reaction area and modifying the activation energy of the anodic reaction. A mechanism is proposed to explain the inhibitory action of the corrosion inhibitor.     

Temperature effect on mild steel corrosion in acid media in presence of azoles

The inhibiting properties of four azoles (indole, benzimidazole, benzotriazole, benzothiazole) were investigated in case of mild steel corrosion in 1 M HCl. The effect of temperature was followed. Impedance spectroscopy, polarization resistance, gravimetric and polarization curves methods were applied. An adequate structural model of the interface in inhibitors presence is offered and the values of the corresponding parameters are calculated. The apparent activation energy of the process taking place in an inhibitor presence was determined on the ground of five temperature values in the range from 20 °C to 60 °C using the data obtained by two independent methods. Comparative investigations were carried out in 1 M H₂SO₄ aiming to elucidate the effect of the acid’s anion. The generalization of the data obtained provided to make conclusions concerning the mechanism of the inhibitors’ adsorption.     

Inhibitive properties of quaternary ammonium bromides of N-containing heterocycles on acid mild steel corrosion. Part I: Gravimetric and voltammetric results

Four quaternary ammonium bromides of different heterocyclic compounds were investigated as corrosion inhibitors of mild steel in 1 M HCl and 1 M H₂SO₄. Polarisation curves, polarisation resistance and gravimetric methods were used. The inhibitor efficiency was found to depend on both concentration and temperature. The inhibitors were of mixed type, influencing predominantly the anodic process. From the temperature dependences the apparent activation energy in 1 M HCl was determined in the presence of all studied compounds, found to be inferior to the activation energy in absence of inhibitor. The adsorption of the inhibitors was well described by the Frumkin or the Langmuir adsorption isotherms in both acidic media and the adsorption isotherm parameters were determined at room temperature. The influence of the molecular structure was discussed taking into account the different number of positive charges and the different heterocycles. The best inhibitive properties had 1-(carbamoylethyl)-4-methylpyridinium bromide.     

Adsorption properties and inhibition of mild steel corrosion in hydrochloric solution by some newly synthesized diamine derivatives: Experimental and theoretical investigations

New diamine derivatives, namely 2-[{2-[bis-(2-hydroxyethyl)amino]ethyl}(2-hydroxyethyl)amino]ethanol (DAME) and 2-[{2-[bis-(2-hydroxyethyl)amino]ethyl}(2-hydroxyethyl)amino]propanol (DAMP) were synthesised and their inhibitive action against the corrosion of mild steel in 1 M HCl solution were investigated at 308 K. The detailed study of DAME is given using gravimetric measurements and polarization curves method. Results show that DAME is a good inhibitor and inhibition efficiency reaches 91.7% at 10⁻³ M. Tafel polarization study revealed that DAME acts as a mixed-type inhibitor. The inhibitor adsorption process in mild steel/DAME/hydrochloric acid system was studied at different temperatures (308-353 K) by means of weight loss measurements. The adsorption of DAME on steel surface obeyed Langmuir’s adsorption isotherm. The kinetic and thermodynamic parameters for mild steel corrosion and inhibitor adsorption, respectively, were determined and discussed. The comparative study of inhibitive performance of the two diamine derivatives revealed that DAME is more effective than DAMP. Quantitative Structure-Activity Relationship (QSAR) approach has been conducted in attempt to correlate the corrosion inhibition properties of these diamine derivatives with their calculated quantum chemical parameters.     

Corrosion inhibition of mild steel in acidic medium by some sulfa drugs compounds

The inhibiting effect of four sulfa drugs compounds (e.g. sulfaguanidine, sulfamethazine, sulfamethoxazole and sulfadiazine) on mild steel corrosion in 1.0 M HCl solutions were evaluated using both galvanostatic polarization and weight loss techniques. All the examined sulfa drug compounds reduce the corrosion of mild steel. Among the compounds studied, sulfadiazine exhibited the best inhibition efficiency and sulfaguanidine the lowest. The inhibition efficiency goes through a maximum for sulfaguanidine while it increases continuously with concentration to a limit with sulfadiazine, sulfamethoxazole and sulfamethazine respectively. Galvanostatic polarization measurements indicate that all the examined compounds are of mixed inhibitor type with predominant cathodic effectiveness. Moreover, the results revealed a better performance for these compounds as corrosion inhibitors in HCl than in H₂SO₄ solutions. Also, the corrosion inhibition mechanism is discussed.     

A preliminary investigation of corrosion inhibition of mild steel in 0.5 M H2SO4 by 2-amino-5-(n-pyridyl)-1,3,4-thiadiazole: Polarization, EIS and molecular dynamics simulations

The efficiency, as steel corrosion inhibitors in 0.5 M H₂SO₄, of two thiadiazole derivatives, 2-amino-5-(3-pyridyl)-1,3,4-thiadiazole (3-APTD) and 2-amino-5-(4-pyridyl)-1,3,4-thiadiazole (4-APTD), was investigated by polarization and electrochemical impedance spectroscopy. The protection efficiency increases with increasing inhibitors concentration, but the temperature has hardly effect on the inhibition efficiency of APTD. The adsorption of APTD on iron surface obeys the Langmuir isotherm. The experimental results show that the inhibition efficiency of 4-APTD is higher than that of 3-APTD, and the molecular dynamics (MD) simulations show that the adsorption of 4-APTD on iron surface has the higher binding energy than that of 3-APTD.     

Inhibition effect of 6-benzylaminopurine on the corrosion of cold rolled steel in H2SO4 solution

The inhibition effect of 6-benzylaminopurine (BAP) on the corrosion of cold rolled steel (CRS) in 1.0-7.0 M H₂SO₄ at 25-50 °C was studied by weight loss and potentiodynamic polarization methods. Fourier transform infrared spectroscopy (FTIR) and atomic force microscope (AFM) were used to characterize the CRS surface. The results showed that BAP was a good inhibitor in 1.0 M H₂SO₄, and the adsorption of BAP obeyed the Temkin adsorption isotherm. Polarization curves showed that BAP acted as a mixed-type inhibitor in sulfuric acid. Depending on the results, the inhibitive mechanism was proposed.     

Experimental and theoretical studies of thiazoles as corrosion inhibitors for mild steel in sulphuric acid solution

The inhibition effects of 2-amino-5-mercapto-1,3,4-thiadiazole (2A5MT) and 2-mercaptothiazoline (2MT) on mild steel corrosion in 1.0 M H₂SO₄ were studied with potentiodynamic polarization, linear polarization resistance and electrochemical impedance spectroscopy techniques. It was shown that both 2A5MT and 2MT act as good corrosion inhibitors for mild steel protection. The high inhibition efficiencies were attributed to the simple blocking effect by adsorption of inhibitor molecules on the steel surface. The effects of the presence of extra NH₂ group and N atom in 2A5MT on the ability to act as corrosion inhibitors were investigated by theoretical calculations.